[Federal Register Volume 82, Number 153 (Thursday, August 10, 2017)]
[Notices]
[Pages 37467-37468]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-16835]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2010-0026]


Standard on the Mechanical Power Presses; Extension of the Office 
of Management and Budget's (OMB) Approval of Information Collection 
(Paperwork) Requirements

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comments.

-----------------------------------------------------------------------

SUMMARY: OSHA solicits comments concerning its proposal to extend OMB 
approval of the information collection requirements specified in the 
Mechanical Power Presses Standard for General Industry.

DATES: Comments must be submitted (postmarked, sent, or received) by 
October 10, 2017.

ADDRESSES: 
    Electronically: You may submit comments and attachments 
electronically at http://www.regulations.gov, which is the Federal 
eRulemaking Portal. Follow the instructions online for submitting 
comments.
    Facsimile: If your comments, including attachments, are not longer 
than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-
1648.
    Mail, hand delivery, express mail, messenger, or courier service: 
When using this method, you must submit a copy of your comments and 
attachments to the OSHA Docket Office, Docket No. OSHA-2010-0026, 
Occupational Safety and Health Administration, U.S. Department of 
Labor, N-3653, 200 Constitution Avenue NW., Washington, DC 20210. 
Deliveries (hand, express mail, messenger, and courier service) are 
accepted during the Department of Labor's and Docket Office's normal 
business hours, 10:00 a.m. to 3:00 p.m., e.t.
    Instructions: All submissions must include the Agency name and OSHA 
docket number for the Information Collection Request (ICR) (OSHA-2010-
0026). All comments, including any personal information you provide, 
are placed in the public docket without change, and may be made 
available online at http://www.regulations.gov. For further information 
on submitting comments, see the ``Public Participation'' heading in the 
section of this notice titled SUPPLEMENTARY INFORMATION.
    Docket: To read or download comments or other material in the 
docket, go to http://www.regulations.gov or the OSHA Docket Office at 
the address above. All documents in the docket (including this Federal 
Register notice) are listed in the http://www.regulations.gov index; 
however, some information (e.g., copyrighted material) is not publicly 
available to read or download through the Web site. All submissions, 
including copyrighted material, are available for inspection and 
copying at the OSHA Docket Office. You may contact Theda Kenney at the 
address below to obtain a copy of the ICR.

FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate 
of Standards and Guidance, OSHA, U.S. Department of Labor, Room N-3609, 
200 Constitution Avenue NW., Washington, DC 20210; telephone (202) 693-
2222.

SUPPLEMENTARY INFORMATION:

I. Background

    The Department of Labor, as part of its continuing effort to reduce 
paperwork and respondent (i.e., employer) burden, conducts a 
preclearance consultation program to provide the public with an 
opportunity to comment on proposed and continuing information 
collection requirements in accordance with the Paperwork Reduction Act 
of 1995 (PRA) (44 U.S.C. 3506(c)(2)(A)). This program ensures that 
information is in the desired format, reporting burden (time and costs) 
is minimal, collection instruments are clearly understood, and OSHA's 
estimate of the information collection burden is accurate. The 
Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651 
et seq.) authorizes information collection by employers as necessary or 
appropriate for enforcement of the OSH Act or for developing 
information regarding the causes and prevention of occupational 
injuries, illnesses, and accidents (29 U.S.C. 657).
    The collection of information contained in the Mechanical Power 
Presses Standard for General Industry are necessary to reduce workers' 
risk of death or serious injury by ensuring that employers maintain the 
mechanical power presses used by the workers in safe operating 
condition.
    The following sections describe who uses the information collected 
under each requirement, as well as how they use it.

Section 1910.217(e)(1)(i)

    Paragraph (e)(1)(i) requires employers to establish and follow a 
program of periodic and regular inspections of power presses to ensure 
that all their parts, auxiliary equipment, and safeguards are in safe 
operating condition and adjustment. Employers must maintain a 
certification record of inspections that includes the date of 
inspection, the signature of the person who performed the inspection, 
and the serial number, or other identifiers, of the power press that 
was inspected.

Section 1910.217(e)(1)(ii)

    Paragraph (e)(1)(ii) requires employers to inspect and test each 
press no less than weekly to determine the condition of the clutch/
brake mechanism, antirepeat feature, and single-stroke mechanism. 
Employers must perform and complete necessary maintenance or repair or 
both before the press is operated. In addition, employers must maintain 
a record of inspections, tests, and maintenance work. The record must 
include the date of the inspection, test, or maintenance; the signature 
of the person who performed the inspection, test, or maintenance; and 
the serial number, or other identifiers, of the press that was 
inspected, tested, or maintained.

II. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:
     Whether the proposed information collection requirements 
are necessary for the proper performance of the Agency's functions, 
including whether the information is useful;
     The accuracy of OSHA's estimate of the burden (time and 
costs) of the information collection requirements, including the 
validity of the methodology and assumptions used;
      The quality, utility, and clarity of the information 
collected; and
      Ways to minimize the burden on employers who must comply; 
for example, by using automated or other technological information 
collection and transmission techniques.

 III. Proposed Actions

     OSHA is requesting that OMB extend its approval of the information 
collection requirements specified in the Standard on Mechanical Power 
Presses (29 CFR 1910.217(e)(1)). The Agency is requesting a slight 
burden hour adjustment decrease of 124 hours from 38,091 hours to 
37,967 hours. The 124 burden hour reduction is a result of

[[Page 37468]]

OSHA determining that employers disclosing information to OSHA during 
an inspection is outside the scope of the PRA.
     The Agency will summarize the comments submitted in response to 
this notice and will include this summary in the request to OMB.
    Type of Review: Extension of a currently approved collection.
    Title: Standard on Mechanical Power Presses (29 CFR 
1910.217(e)(1)).
    OMB Control Number: 1218-0229.
    Affected Public: Business or other for-profit; farms.
    Respondents: 295,000.
    Number of Responses: 115,050.
    Frequency of Response: On occasion, weekly, monthly.
    Average Time per Response: Various.
    Estimated Total Burden Hours: 37,967 hours.
    Estimated Cost (Operation and Maintenance): $0.

 IV. Public Participation--Submission of Comments on This Notice and 
Internet Access to Comments and Submissions

     You may submit comments in response to this document as follows: 
(1) Electronically at  http://www.regulations.gov, which is the Federal 
eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All 
comments, attachments, and other material must identify the Agency name 
and the OSHA docket number for the ICR (Docket No. OSHA-2010-0026). You 
may supplement electronic submissions by uploading document files. If 
you wish to mail additional materials in reference to an electronic or 
facsimile submission, you must submit them to the OSHA Docket Office 
(see the section of this notice titled ADDRESSES). The additional 
materials must clearly identify your electronic comments by your name, 
date, and the docket number so the Agency can attach them to your 
comments.
     Because of security procedures, the use of regular mail may cause 
a significant delay in the receipt of comments. For information about 
security procedures affecting the delivery of materials by hand, 
express delivery, messenger, or courier service, please contact the 
OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).
     Comments and submissions are posted without change at http://www.regulations.gov. Therefore, OSHA cautions commenters about 
submitting personal information such as social security numbers and 
dates of birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted 
material) is not publicly available to read or download through this 
Web site. All submissions, including copyrighted material, are 
available for inspection and copying at the OSHA Docket Office. 
Information on using the http://www.regulations.gov Web site to submit 
comments and access the docket is available at the Web site's ``User 
Tips'' link. Contact the OSHA Docket Office for information about 
materials not available through the Web site, and for assistance in 
using the Internet to locate docket submissions.

 V. Authority and Signature

     Loren Sweatt, Deputy Assistant Secretary of Labor for Occupational 
Safety and Health, directed the preparation of this notice. The 
authority for this notice is the Paperwork Reduction Act of 1995 (44 
U.S.C. 3506 et seq. ) and Secretary of Labor's Order No. 5-2007 (72 FR 
31160).

     Signed at Washington, DC, on August 3, 2017.
Loren Sweatt,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2017-16835 Filed 8-9-17; 8:45 am]
BILLING CODE 4510-26-P