[Federal Register Volume 82, Number 118 (Wednesday, June 21, 2017)]
[Notices]
[Pages 28356-28358]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-12913]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2009-0026]


Curtis-Strauss LLC: Application for Expansion of Recognition

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: In this notice, OSHA announces the application of Curtis-
Strauss LLC for expansion of its recognition as a Nationally Recognized 
Testing Laboratory (NRTL) and presents the Agency's preliminary finding 
to grant the application.

DATES: Submit comments, information, and documents in response to this 
notice, or requests for an extension of time to make a submission, on 
or before July 6, 2017.

ADDRESSES: Submit comments by any of the following methods:
    1. Electronically: Submit comments and attachments electronically 
at http://www.regulations.gov, which is the Federal eRulemaking Portal. 
Follow the instructions online for making electronic submissions.
    2. Facsimile: If submissions, including attachments, are not longer 
than 10 pages, commenters may fax them to the OSHA Docket Office at 
(202) 693-1648.
    3. Regular or express mail, hand delivery, or messenger (courier) 
service: Submit comments, requests, and any attachments to the OSHA 
Docket Office, Docket No. OSHA-2009-0026, Technical Data Center, U.S. 
Department of Labor, 200 Constitution Avenue NW., Room N-3508, 
Washington, DC 20210; telephone: (202) 693-2350 (TTY number: (877) 889-
5627). Note that security procedures may result in significant delays 
in receiving comments and other written materials by regular mail. 
Contact the OSHA Docket Office for information about security 
procedures concerning delivery of materials by express mail, hand 
delivery, or messenger service. The hours of operation for the OSHA 
Docket Office are 10:00 a.m.-2:30 p.m., e.t.
    4. Instructions: All submissions must include the Agency name and 
the OSHA docket number (OSHA-2009-0026). OSHA places comments and other 
materials, including any personal information, in the public docket 
without revision, and these materials will be available online at 
http://www.regulations.gov. Therefore, the Agency cautions commenters 
about submitting statements they do not want made available to the 
public, or submitting comments that contain personal information 
(either about themselves or others) such as Social Security numbers, 
birth dates, and medical data.
    5. Docket: To read or download submissions or other material in the 
docket, go to http://www.regulations.gov or the OSHA Docket Office at 
the address above. All documents in the docket are listed in the http://www.regulations.gov index; however, some information (e.g., 
copyrighted material) is not publicly available to read or download 
through the Web site. All submissions, including copyrighted material, 
are available for inspection at the OSHA Docket Office. Contact the 
OSHA Docket Office for assistance in locating docket submissions.
    6. Extension of comment period: Submit requests for an extension of 
the comment period on or before July 6, 2017 to the Office of Technical 
Programs and Coordination Activities, Directorate of Technical Support 
and Emergency Management, Occupational Safety and Health 
Administration, U.S. Department of Labor, 200 Constitution Avenue NW., 
Room N-3655, Washington, DC 20210, or by fax to (202) 693-1644.

[[Page 28357]]


FOR FURTHER INFORMATION CONTACT: Information regarding this notice is 
available from the following sources:
    Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office 
of Communications, U.S. Department of Labor, 200 Constitution Avenue 
NW., Room N-3647, Washington, DC 20210; telephone: (202) 693-1999; 
email: [email protected].
    General and technical information: Contact Mr. Kevin Robinson, 
Director, Office of Technical Programs and Coordination Activities, 
Directorate of Technical Support and Emergency Management, Occupational 
Safety and Health Administration, U.S. Department of Labor, 200 
Constitution Avenue NW., Room N-3655, Washington, DC 20210; phone: 
(202) 693-2110 or email: [email protected].

SUPPLEMENTARY INFORMATION: 

I. Notice of the Application for Expansion

    The Occupational Safety and Health Administration is providing 
notice that Curtis-Strauss LLC (CSL), is applying for expansion of its 
current recognition as an NRTL. CSL requests the addition of five test 
standards to its NRTL scope of recognition.
    OSHA recognition of an NRTL signifies that the organization meets 
the requirements specified in 29 CFR 1910.7. Recognition is an 
acknowledgment that the organization can perform independent safety 
testing and certification of the specific products covered within its 
scope of recognition. Each NRTL's scope of recognition includes (1) the 
type of products the NRTL may test, with each type specified by its 
applicable test standard; and (2) the recognized site(s) that has/have 
the technical capability to perform the product-testing and product-
certification activities for test standards within the NRTL's scope. 
Recognition is not a delegation or grant of government authority; 
however, recognition enables employers to use products approved by the 
NRTL to meet OSHA standards that require product testing and 
certification.
    The Agency processes applications by an NRTL for initial 
recognition and for an expansion or renewal of this recognition, 
following requirements in Appendix A to 29 CFR 1910.7. This appendix 
requires that the Agency publish two notices in the Federal Register in 
processing an application. In the first notice, OSHA announces the 
application and provides its preliminary finding. In the second notice, 
the Agency provides its final decision on the application. These 
notices set forth the NRTL's scope of recognition or modifications of 
that scope. OSHA maintains an informational Web page for each NRTL, 
including CSL, which details the NRTL's scope of recognition. These 
pages are available from the OSHA Web site at http://www.osha.gov/dts/otpca/nrtl/index.html.
    CSL currently has one facility (site) recognized by OSHA for 
product testing and certification, with its headquarters located at: 
Curtis-Strauss LLC, Littleton Distribution Center, One Distribution 
Center Circle, Suite #1, Littleton, MA 01460. A complete list of CSL's 
scope of recognition is available at https://www.osha.gov/dts/otpca/nrtl/csl.html.

II. General Background on the Application

    CSL submitted an application, dated December 30, 2016 (OSHA-2009-
0026-0073), to expand its recognition to include five additional test 
standards. OSHA staff performed a detailed analysis of the application 
packet and reviewed other pertinent information. OSHA did not perform 
any on-site reviews in relation to this application.
    Table 1 below lists the appropriate test standards found in CSL's 
application for expansion for testing and certification of products 
under the NRTL Program.

  Table 1--Proposed List of Appropriate Test Standards for Inclusion in
                     CSL's NRTL Scope of Recognition
------------------------------------------------------------------------
           Test standard                     Test standard title
------------------------------------------------------------------------
UL 763............................  Motor-Operated Commercial Food
                                     Preparing Machines.
UL 197............................  Commercial Electric Cooking
                                     Appliances.
UL 982............................  Motor-Operated Household Food
                                     Preparing Machines.
UL 60335-2-3......................  Safety of Household and Similar
                                     Electrical Appliances, Part 2:
                                     Particular Requirements for
                                     Electric Irons.
UL 60335-2-34.....................  Safety of Household and Similar
                                     Electrical Appliances, Part 2-34:
                                     Particular Requirements for Motor-
                                     Compressors.
------------------------------------------------------------------------

III. Preliminary Findings on the Application

    CSL submitted an acceptable application for expansion of its scope 
of recognition. OSHA's review of the application file, and pertinent 
documentation, indicates that CSL can meet the requirements prescribed 
by 29 CFR 1910.7 for expanding its recognition to include the addition 
of these five test standards for NRTL testing and certification listed 
above. This preliminary finding does not constitute an interim or 
temporary approval of CSL's application.
    OSHA welcomes public comment as to whether CSL meets the 
requirements of 29 CFR 1910.7 for expansion of its recognition as an 
NRTL. Comments should consist of pertinent written documents and 
exhibits. Commenters needing more time to comment must submit a request 
in writing, stating the reasons for the request. Commenters must submit 
the written request for an extension by the due date for comments. OSHA 
will limit any extension to 10 days unless the requester justifies a 
longer period. OSHA may deny a request for an extension if the request 
is not adequately justified. To obtain or review copies of the exhibits 
identified in this notice, as well as comments submitted to the docket, 
contact the Docket Office, Room N-3508, Occupational Safety and Health 
Administration, U.S. Department of Labor, at the above address. These 
materials also are available online at http://www.regulations.gov under 
Docket No. OSHA-2009-0026.
    OSHA staff will review all comments to the docket submitted in a 
timely manner and, after addressing the issues raised by these 
comments, will recommend to the Assistant Secretary for Occupational 
Safety and Health whether to grant CSL's application for expansion of 
its scope of recognition. The Assistant Secretary will make the final 
decision on granting the application. In making this decision, the 
Assistant Secretary may undertake other proceedings prescribed in 
Appendix A to 29 CFR 1910.7.
    OSHA will publish a public notice of its final decision in the 
Federal Register.

IV. Authority and Signature

    Dorothy Dougherty, Deputy Assistant Secretary of Labor for 
Occupational Safety and Health, 200 Constitution Avenue NW., 
Washington, DC 20210, authorized the preparation of this notice. 
Accordingly, the Agency is

[[Page 28358]]

issuing this notice pursuant to 29 U.S.C. 657(g)(2), Secretary of 
Labor's Order No. 1-2012 (77 FR 3912, Jan. 25, 2012), and 29 CFR 
1910.7.

    Signed at Washington, DC, on June 15, 2017.
Dorothy Dougherty,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2017-12913 Filed 6-20-17; 8:45 am]
BILLING CODE 4510-26-P