[Federal Register Volume 82, Number 79 (Wednesday, April 26, 2017)]
[Notices]
[Pages 19213-19217]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-08212]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[C-475-837; C-489-832]


Carbon and Alloy Steel Wire Rod From Italy and Turkey: Initiation 
of Countervailing Duty Investigations

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.


DATES: Effective April 17, 2017.

FOR FURTHER INFORMATION CONTACT: John Corrigan and Yasmin Bordas at 
(202) 482-7438 and (202) 482-3813, respectively (Italy); Justin Neuman 
and Omar Qureshi at (202) 482-0486 and (202) 482-5307, respectively 
(Turkey), AD/CVD Operations, Enforcement and Compliance, International 
Trade Administration, U.S. Department of Commerce, 1401 Constitution 
Avenue NW., Washington, DC 20230.

SUPPLEMENTARY INFORMATION: 

The Petitions

    On March 28, 2017, the Department of Commerce (the Department) 
received countervailing duty (CVD) Petitions concerning imports of 
carbon and alloy steel wire rod (wire rod) from Italy and Turkey, filed 
in proper form on behalf of Gerdau Ameristeel US Inc., Nucor 
Corporation, Keystone Consolidated Industries, Inc., and Charter Steel 
(collectively, the petitioners). The CVD Petitions were accompanied by 
antidumping duty (AD) Petitions concerning imports of wire rod from 
each of the above countries, in addition to Belarus, the Republic of 
Korea, the Russian Federation, the Republic of South Africa, Spain, 
Ukraine, the United Arab Emirates, and the United

[[Page 19214]]

Kingdom.\1\ The petitioners are domestic producers of wire rod.\2\
---------------------------------------------------------------------------

    \1\ See ``Carbon and Alloy Steel Wire Rod from Belarus, Italy, 
the Republic of Korea, the Russian Federation, the Republic of South 
Africa, Spain, Turkey, Ukraine, United Arab Emirates, and the United 
Kingdom--Petitions for the Imposition of Antidumping and 
Countervailing Duties,'' dated March 28, 2017 (Petitions).
    \2\ Id., Volume I at 2.
---------------------------------------------------------------------------

    On March 31, April 3, and April 4, 2017, the Department requested 
supplemental information pertaining to certain areas of the 
Petitions.\3\ The petitioners filed responses to these requests on 
April 4 and April 6, 2017.\4\
---------------------------------------------------------------------------

    \3\ See Letter from the Department, ``Petition for the 
Imposition of Countervailing Duties on Imports of Carbon and Alloy 
Steel Wire Rod from Italy: Supplemental Questions,'' dated March 31, 
2017 (Italy CVD Supplemental Questionnaire); see also Letter from 
the Department, ``Petitions for the Imposition of Antidumping and 
Countervailing Duties on Imports of Carbon and Alloy Steel Wire Rod 
from Belarus, Italy, the Republic of Korea, the Russian Federation, 
the Republic of South Africa, Spain, the Republic of Turkey, 
Ukraine, United Arab Emirates, and the United Kingdom: Supplemental 
Questions,'' dated March 31, 2017 (General Issues Supplemental 
Questionnaire); see also Letter from the Department ``Petition for 
the Imposition of Countervailing Duties on Imports of Carbon and 
Alloy Steel Wire Rod from Turkey: Supplemental Questions,'' dated 
April 4, 2017 (Turkey CVD Supplemental Questionnaire).
    \4\ See Letter from Petitioners, ``Carbon and Alloy Steel Wire 
Rod from Belarus, Italy, the Republic of Korea, the Russian 
Federation, the Republic of South Africa, Spain, Turkey, Ukraine, 
United Arab Emirates, and the United Kingdom--Petitioners' Amendment 
to Volume XIII Relating to Italy Countervailing Duties,'' dated 
April 4, 2017 (Italy CVD Supplement); see also Letter from 
Petitioners, ``Carbon and Alloy Steel Wire Rod from Belarus, Italy, 
the Republic of Korea, the Russian Federation, the Republic of South 
Africa, Spain, Turkey, Ukraine, United Arab Emirates, and the United 
Kingdom--Petitioners' Amendment to Volume I Relating to General 
Issues,'' dated April 4, 2017 (General Issues Supplement); see also 
Letter from Petitioners, ``Carbon and Alloy Steel Wire Rod from 
Belarus, Italy, the Republic of Korea, the Russian Federation, the 
Republic of South Africa, Spain, Turkey, Ukraine, United Arab 
Emirates, and the United Kingdom--Petitioners' Amendment to Volume 
XII Relating to Turkey Countervailing Duties,'' dated April 6, 2017 
(Turkey CVD Supplement).
---------------------------------------------------------------------------

    In accordance with section 702(b)(1) of the Tariff Act of 1930, as 
amended (the Act), the petitioners allege that the Governments of Italy 
(GOI) and Turkey (GOT) are providing countervailable subsidies, within 
the meaning of sections 701 and 771(5) of the Act, to imports of wire 
rod from Italy and Turkey, respectively, and that such imports are 
materially injuring, or threatening material injury to, the domestic 
industry producing wire rod in the United States. Also, consistent with 
section 702(b)(1) of the Act, for those alleged programs on which we 
are initiating a CVD investigation, the Petitions are accompanied by 
information reasonably available to the petitioners supporting their 
allegations.
    The Department finds that the petitioners filed the Petitions on 
behalf of the domestic industry because the petitioners are interested 
parties as defined in section 771(9)(C) of the Act. The Department also 
finds that the petitioners demonstrated sufficient industry support 
with respect to the initiation of the CVD investigations that the 
petitioners are requesting.\5\
---------------------------------------------------------------------------

    \5\ See ``Determination of Industry Support for the Petition'' 
section, below.
---------------------------------------------------------------------------

Periods of Investigation

    Because the Petitions were filed on March 28, 2017, the period of 
investigation is January 1, 2016, through December 31, 2016.

Scope of the Investigations

    The product covered by these investigations is wire rod from Italy 
and Turkey. For a full description of the scope of these 
investigations, see the ``Scope of the Investigations,'' in Appendix I 
of this notice.

Comments on Scope of the Investigations

    During our review of the Petitions, the Department issued questions 
to, and received responses from, the petitioners pertaining to the 
proposed scope to ensure that the scope language in the Petitions would 
be an accurate reflection of the products for which the domestic 
industry is seeking relief.\6\
---------------------------------------------------------------------------

    \6\ See General Issues Supplemental Questionnaire; see also 
General Issues Supplement.
---------------------------------------------------------------------------

    As discussed in the preamble to the Department's regulations, we 
are setting aside a period for interested parties to raise issues 
regarding product coverage (scope).\7\ The Department will consider all 
comments received from interested parties and, if necessary, will 
consult with the interested parties prior to the issuance of the 
preliminary determination. If scope comments include factual 
information (see 19 CFR 351.102(b)(21)) all such factual information 
should be limited to public information. To facilitate preparation of 
its questionnaires, the Department requests all interested parties to 
submit such comments by 5:00 p.m. Eastern Time (ET) on Monday, May 8, 
2017, which is the next business day after 20 calendar days from the 
signature date of this notice. Any rebuttal comments, which may include 
factual information, must be filed by 5:00 p.m. ET on Thursday, May 18, 
2017, which is 10 calendar days from the initial comments deadline.\8\
---------------------------------------------------------------------------

    \7\ See Antidumping Duties; Countervailing Duties; Final Rule, 
62 FR 27296, 27323 (May 19, 1997).
    \8\ See 19 CFR 351.303(b).
---------------------------------------------------------------------------

    The Department requests that any factual information the parties 
consider relevant to the scope of the investigations be submitted 
during this time period. However, if a party subsequently finds that 
additional factual information pertaining to the scope of the 
investigations may be relevant, the party may contact the Department 
and request permission to submit the additional information. All such 
comments must be filed on the records of each of the concurrent AD and 
CVD investigations.

Filing Requirements

    All submissions to the Department must be filed electronically 
using Enforcement and Compliance's Antidumping Duty and Countervailing 
Duty Centralized Electronic Service System (ACCESS).\9\ An 
electronically filed document must be received successfully in its 
entirety by the time and date it is due. Documents excepted from the 
electronic submission requirements must be filed manually (i.e., in 
paper form) with Enforcement and Compliance's APO/Dockets Unit, Room 
18022, U.S. Department of Commerce, 1401 Constitution Avenue NW., 
Washington, DC 20230, and stamped with the date and time of receipt by 
the applicable deadlines.
---------------------------------------------------------------------------

    \9\ See 19 CFR 351.303 (for general filing requirements); see 
also Antidumping and Countervailing Duty Proceedings: Electronic 
Filing Procedures; Administrative Protective Order Procedures, 76 FR 
39263 (July 6, 2011), for details of the Department's electronic 
filing requirements, which went into effect on August 5, 2011. 
Information on help using ACCESS can be found at https://access.trade.gov/help.aspx, and a handbook can be found at https://access.trade.gov/help/Handbook%20on%20Electronic%20Filling%20Procedures.pdf.
---------------------------------------------------------------------------

Consultations

    Pursuant to sections 702(b)(4)(A)(i) and (ii) of the Act, the 
Department notified representatives of the GOI and the GOT of the 
receipt of the Petitions, and provided representatives of the GOI and 
the GOT the opportunity for consultations with respect to the CVD 
Petitions. Consultations with the GOI and the GOT were held at the 
Department's main building on April 11, 2017. The GOI submitted its 
consultation comments in writing to the Department on April 13, 
2017.\10\
---------------------------------------------------------------------------

    \10\ See Letter to the Secretary from the Embassy of Italy, 
dated April 13, 2017.
---------------------------------------------------------------------------

Determination of Industry Support for the Petitions

    Section 702(b)(1) of the Act requires that a petition be filed on 
behalf of the domestic industry. Section 702(c)(4)(A) of the Act 
provides that a petition meets this requirement if the domestic

[[Page 19215]]

producers or workers who support the petition account for: (i) At least 
25 percent of the total production of the domestic like product; and 
(ii) more than 50 percent of the production of the domestic like 
product produced by that portion of the industry expressing support 
for, or opposition to, the petition. Moreover, section 702(c)(4)(D) of 
the Act provides that, if the petition does not establish support of 
domestic producers or workers accounting for more than 50 percent of 
the total production of the domestic like product, the Department 
shall: (i) Poll the industry or rely on other information in order to 
determine if there is support for the petition, as required by 
subparagraph (A); or (ii) determine industry support using a 
statistically valid sampling method to poll the ``industry.''
    Section 771(4)(A) of the Act defines the ``industry'' as the 
producers as a whole of a domestic like product. Thus, to determine 
whether a petition has the requisite industry support, the statute 
directs the Department to look to producers and workers who produce the 
domestic like product. The International Trade Commission (ITC), which 
is responsible for determining whether ``the domestic industry'' has 
been injured, must also determine what constitutes a domestic like 
product in order to define the industry. While both the Department and 
the ITC must apply the same statutory definition regarding the domestic 
like product,\11\ they do so for different purposes and pursuant to a 
separate and distinct authority. In addition, the Department's 
determination is subject to limitations of time and information. 
Although this may result in different definitions of the like product, 
such differences do not render the decision of either agency contrary 
to law.\12\
---------------------------------------------------------------------------

    \11\ See section 771(10) of the Act.
    \12\ See USEC, Inc. v. United States, 132 F. Supp. 2d 1, 8 (CIT 
2001) (citing Algoma Steel Corp., Ltd. v. United States, 688 F. 
Supp. 639, 644 (CIT 1988), aff'd 865 F.2d 240 (Fed. Cir. 1989)).
---------------------------------------------------------------------------

    Section 771(10) of the Act defines the domestic like product as ``a 
product which is like, or in the absence of like, most similar in 
characteristics and uses with, the article subject to an investigation 
under this title.'' Thus, the reference point from which the domestic 
like product analysis begins is ``the article subject to an 
investigation'' (i.e., the class or kind of merchandise to be 
investigated, which normally will be the scope as defined in the 
Petitions).
    With regard to the domestic like product, the petitioners do not 
offer a definition of the domestic like product distinct from the scope 
of the investigations. Based on our analysis of the information 
submitted on the record, we have determined that wire rod, as defined 
in the scope, constitutes a single domestic like product and we have 
analyzed industry support in terms of that domestic like product.\13\
---------------------------------------------------------------------------

    \13\ For a discussion of the domestic like product analysis in 
this case, see Countervailing Duty Investigation Initiation 
Checklist: Carbon and Alloy Steel Wire Rod from Italy (Italy CVD 
Initiation Checklist), at Attachment II, Countervailing Duty 
Investigation Initiation Checklist: Carbon and Alloy Steel Wire Rod 
from Turkey (Turkey CVD Initiation Checklist), at Attachment II, and 
Analysis of Industry Support for the Antidumping and Countervailing 
Duty Petitions Covering Carbon and Alloy Steel Wire Rod from 
Belarus, Italy, the Republic of Korea, the Russian Federation, South 
Africa, Spain, Turkey, Ukraine, the United Arab Emirates, and the 
United Kingdom (Attachment II).These checklists are dated 
concurrently with this notice and on file electronically via ACCESS. 
Access to documents filed via ACCESS is also available in the 
Central Records Unit, Room B8024 of the main Department of Commerce 
building.
---------------------------------------------------------------------------

    In determining whether the petitioners have standing under section 
702(c)(4)(A) of the Act, we considered the industry support data 
contained in the Petitions with reference to the domestic like product 
as defined in the ``Scope of the Investigations,'' in Appendix I of 
this notice. The petitioners provided 2016 production of the domestic 
like product for all supporters of the Petitions, and compared this to 
the total production of the domestic like product for the entire 
domestic industry.\14\ We relied on data the petitioners provided for 
purposes of measuring industry support.\15\
---------------------------------------------------------------------------

    \14\ See Volume I of the Petitions, at 3 and Exhibit I-3; see 
also General Issues Supplement, at 4-5 and Exhibits I-SUPP-4 and I-
SUPP-5.
    \15\ Id. For further discussion, see Italy CVD Initiation 
Checklist and Turkey CVD Initiation Checklist, at Attachment II.
---------------------------------------------------------------------------

    Our review of the data provided in the Petitions, General Issues 
Supplement, and other information readily available to the Department 
indicates that the petitioners have established industry support for 
the Petitions.\16\ First, the Petitions established support from 
domestic producers (or workers) accounting for more than 50 percent of 
the total production of the domestic like product and, as such, the 
Department is not required to take further action in order to evaluate 
industry support (e.g., polling).\17\ Second, the domestic producers 
(or workers) have met the statutory criteria for industry support under 
section 702(c)(4)(A)(i) of the Act because the domestic producers (or 
workers) who support the Petitions account for at least 25 percent of 
the total production of the domestic like product.\18\ Finally, the 
domestic producers (or workers) have met the statutory criteria for 
industry support under section 702(c)(4)(A)(ii) of the Act because the 
domestic producers (or workers) who support the Petitions account for 
more than 50 percent of the production of the domestic like product 
produced by that portion of the industry expressing support for, or 
opposition to, the Petitions.\19\ Accordingly, the Department 
determines that the Petitions were filed on behalf of the domestic 
industry within the meaning of section 702(b)(1) of the Act.
---------------------------------------------------------------------------

    \16\ See Italy CVD Initiation Checklist and Turkey CVD 
Initiation Checklist, at Attachment II.
    \17\ See section 702(c)(4)(D) of the Act; see also Italy CVD 
Initiation Checklist and Turkey CVD Initiation Checklist, at 
Attachment II.
    \18\ See Italy CVD Initiation Checklist and Turkey CVD 
Initiation Checklist, at Attachment II.
    \19\ Id.
---------------------------------------------------------------------------

    The Department finds that the petitioners filed the Petitions on 
behalf of the domestic industry because they are interested parties as 
defined in section 771(9)(C) of the Act and they have demonstrated 
sufficient industry support with respect to the CVD investigations they 
are requesting that the Department initiate.\20\
---------------------------------------------------------------------------

    \20\ Id.
---------------------------------------------------------------------------

Injury Test

    Because Italy and Turkey are ``Subsidies Agreement Countries'' 
within the meaning of section 701(b) of the Act, section 701(a)(2) of 
the Act applies to these investigations. Accordingly, the ITC must 
determine whether imports of the subject merchandise from Italy and 
Turkey materially injure, or threaten material injury to, a U.S. 
industry.

Allegations and Evidence of Material Injury and Causation

    The petitioners allege that imports of the subject merchandise are 
benefitting from countervailable subsidies and that such imports are 
causing, or threaten to cause, material injury to the U.S. industry 
producing the domestic like product. In addition, with regard to 
Turkey, the petitioners allege that subject imports exceed the 
negligibility threshold provided for under section 771(24)(A) of the 
Act.\21\
---------------------------------------------------------------------------

    \21\ See Volume I of the Petitions, at 16-17 and Exhibit I-13.
---------------------------------------------------------------------------

    While the allegedly subsidized imports from Italy do not 
individually meet the statutory negligibility threshold of three 
percent, the petitioners allege and provide supporting evidence that 
there is the potential that imports from Italy will imminently exceed 
the negligibility threshold and, therefore, are not negligible for 
purposes of a threat

[[Page 19216]]

determination.\22\ The petitioners' arguments regarding the potential 
for imports to imminently exceed the negligibility threshold are 
consistent with the statutory criterial for ``negligibility in threat 
analysis'' under section 771(24)(A)(iv) of the Act, which provides that 
imports shall not be treated as negligible if there is a potential that 
subject imports from a country will imminently exceed the statutory 
requirements for negligibility.
---------------------------------------------------------------------------

    \22\ Id., at 18-19 and Exhibit I-13.
---------------------------------------------------------------------------

    The petitioners contend that the industry's injured condition is 
illustrated by reduced market share; underselling and price suppression 
or depression; declines in production capacity, net sales, and U.S. 
producers' average U.S. shipments unit value; negative impacts on 
domestic industry employment, including declines in wages paid to 
production-relate workers; declines in financial performance; and lost 
sales and revenues.\23\ We have assessed the allegations and supporting 
evidence regarding material injury, threat of material injury, and 
causation, and we have determined that these allegations are properly 
supported by adequate evidence, and meet the statutory requirements for 
initiation.\24\
---------------------------------------------------------------------------

    \23\ Id., at 10-12, 23-37, and Exhibits I-8, I-10--I-12, and I-
14--I-15.
    \24\ See Italy CVD Initiation Checklist, at Attachment III, 
Analysis of Allegations and Evidence of Material Injury and 
Causation for the Antidumping and Countervailing Duty Petitions 
Covering Carbon and Alloy Steel Wire Rod from Belarus, Italy, the 
Republic of Korea, the Russian Federation, South Africa, Spain, 
Turkey, Ukraine, the United Arab Emirates, and the United Kingdom 
(Attachment III); see also Turkey CVD Initiation Checklist, at 
Attachment III.
---------------------------------------------------------------------------

Initiation of CVD Investigations

    Section 702(b)(1) of the Act requires the Department to initiate a 
CVD investigation whenever an interested party files a CVD petition on 
behalf of an industry that (1) alleges the elements necessary for an 
imposition of a duty under section 701(a) of the Act and (2) is 
accompanied by information reasonably available to the petitioners 
supporting the allegations.
    The petitioners allege that producers/exporters of wire rod in 
Italy and Turkey benefit from countervailable subsidies bestowed by the 
governments of these countries, respectively. The Department examined 
the Petitions and finds that they comply with the requirements of 
section 702(b)(1) of the Act. Therefore, in accordance with section 
702(b)(1) of the Act, we are initiating CVD investigations to determine 
whether manufacturers, producers, and/or exporters of wire rod from 
Italy and Turkey receive countervailable subsidies from the governments 
of these countries, respectively.
    Under the Trade Preferences Extension Act of 2015, numerous 
amendments to the AD and CVD laws were made.\25\ The 2015 law does not 
specify dates of application for those amendments. On August 6, 2015, 
the Department published an interpretative rule, in which it announced 
the applicability dates for each amendment to the Act, except for 
amendments contained in section 771(7) of the Act, which relate to 
determinations of material injury by the ITC.\26\ The amendments to 
sections 776 and 782 of the Act are applicable to all determinations 
made on or after August 6, 2015, and, therefore, apply to these CVD 
investigations.\27\
---------------------------------------------------------------------------

    \25\ See Trade Preferences Extension Act of 2015, Public Law 
114-27, 129 Stat. 362 (2015).
    \26\ See Dates of Application of Amendments to the Antidumping 
and Countervailing Duty Laws Made by the Trade Preferences Extension 
Act of 2015, 80 FR 46793 (August 6, 2015) (Applicability Notice). 
The 2015 amendments may be found at https://www.congress.gov/bill/114th-congress/house-bill/1295/text/pl.
    \27\ See Applicability Notice, 80 FR at 46794-95.
---------------------------------------------------------------------------

Italy

    Based on our review of the petition, we find that there is 
sufficient information to initiate a CVD investigation on 14 of the 15 
alleged programs. For a full discussion of the basis for our decision 
to initiate or not initiate on each program, see the Italy CVD 
Initiation Checklist.

Turkey

    Based on our review of the petition, we find that there is 
sufficient information to initiate a CVD investigation on 21 of the 22 
alleged programs. For a full discussion of the basis for our decision 
to initiate or not initiate on each program, see the Turkey CVD 
Initiation Checklist.
    A public version of the initiation checklist for each investigation 
is available on ACCESS.
    In accordance with section 703(b)(1) of the Act and 19 CFR 
351.205(b)(1), unless postponed, we will make our preliminary 
determination no later than 65 days after the date of this initiation.

Respondent Selection

    The petitioners named 13 companies as producers/exporters of wire 
rod in Italy and 22 in Turkey.\28\ Following standard practice in CVD 
investigations, the Department will, where appropriate, select 
respondents based on U.S. Customs and Border Protection (CBP) data for 
U.S. imports of wire rod during the POI under the appropriate 
Harmonized Tariff Schedule of the United States numbers. We intend to 
release CBP data under Administrative Protective Order (APO) to all 
parties with access to information protected by APO within five 
business days of the announcement of the initiation of this 
investigation. Interested parties must submit applications for 
disclosure under APO in accordance with 19 CFR 351.305(b). Instructions 
for filing such applications may be found on the Department's Web site 
at http://enforcement.trade.gov/apo.
---------------------------------------------------------------------------

    \28\ See Petition, Volume I at Exhibit I-7.
---------------------------------------------------------------------------

    Interested parties may submit comments regarding the CBP data and 
respondent selection by 5:00 p.m. ET on the seventh calendar day after 
publication of this notice. Parties wishing to submit rebuttal comments 
should submit those comments five calendar days after the deadline for 
initial comments.
    Comments must be filed electronically using ACCESS. An 
electronically-filed document must be received successfully, in its 
entirety, by ACCESS no later than 5:00 p.m. ET on the date noted above. 
If respondent selection is necessary, within 20 days of publication of 
this notice, we intend to make our decision regarding respondent 
selection based upon comments received from interested parties and our 
analysis of the record information.

Distribution of Copies of the Petitions

    In accordance with section 702(b)(4)(A)(i) of the Act and 19 CFR 
351.202(f), copies of the public version of the Petitions have been 
provided to the GOI and GOT via ACCESS. To the extent practicable, we 
will attempt to provide a copy of the public version of the Petitions 
to each exporter named in the Petitions, as provided under 19 CFR 
351.203(c)(2).

ITC Notification

    We will notify the ITC of our initiation, as required by section 
702(d) of the Act.

Preliminary Determinations by the ITC

    The ITC will preliminarily determine, within 45 days after the date 
on which the Petitions were filed, whether there is a reasonable 
indication that imports of wire rod from Italy and Turkey are 
materially injuring, or threatening material injury to, a U.S. 
industry.\29\ A negative ITC determination will result in the 
investigation being terminated.\30\ Otherwise, this investigation will

[[Page 19217]]

proceed according to statutory and regulatory time limits.
---------------------------------------------------------------------------

    \29\ See section 703(a)(2) of the Act.
    \30\ See section 703(a)(1) of the Act.
---------------------------------------------------------------------------

Submission of Factual Information

    Factual information is defined in 19 CFR 351.102(b)(21) as: (i) 
Evidence submitted in response to questionnaires; (ii) evidence 
submitted in support of allegations; (iii) publicly available 
information to value factors under 19 CFR 351.408(c) or to measure the 
adequacy of remuneration under 19 CFR 351.511(a)(2); (iv) evidence 
placed on the record by the Department; and (v) evidence other than 
factual information described in (i)-(iv). 19 CFR 351.301(b) requires 
any party, when submitting factual information, to specify under which 
subsection of 19 CFR 351.102(b)(21) the information is being submitted 
and, if the information is submitted to rebut, clarify, or correct 
factual information already on the record, to provide an explanation 
identifying the information already on the record that the factual 
information seeks to rebut, clarify, or correct. Time limits for the 
submission of factual information are addressed in 19 CFR 351.301, 
which provides specific time limits based on the type of factual 
information being submitted. Parties should review the regulations 
prior to submitting factual information in these investigations.

Extension of Time Limits

    Parties may request an extension of time limits before the 
expiration of a time limit established under 19 CFR 351.301, or as 
otherwise specified by the Secretary. In general, an extension request 
will be considered untimely if it is filed after the expiration of the 
time limit established under 19 CFR 351.301 expires. For submissions 
that are due from multiple parties simultaneously, an extension request 
will be considered untimely if it is filed after 10:00 a.m. on the due 
date. Under certain circumstances, we may elect to specify a different 
time limit by which extension requests will be considered untimely for 
submissions which are due from multiple parties simultaneously. In such 
a case, we will inform parties in the letter or memorandum setting 
forth the deadline (including a specified time) by which extension 
requests must be filed to be considered timely. An extension request 
must be made in a separate, stand-alone submission; under limited 
circumstances we will grant untimely-filed requests for the extension 
of time limits. Review Extension of Time Limits; Final Rule, 78 FR 
57790 (September 20, 2013), available at http://www.gpo.gov/fdsys/pkg/FR-2013-09-20/html/2013-22853.htm, prior to submitting factual 
information in this investigation.

Certification Requirements

    Any party submitting factual information in an AD or CVD proceeding 
must certify to the accuracy and completeness of that information.\31\ 
Parties are hereby reminded that revised certification requirements are 
in effect for company/government officials, as well as their 
representatives. Investigations initiated on the basis of petitions 
filed on or after August 16, 2013, and other segments of any AD or CVD 
proceedings initiated on or after August 16, 2013, should use the 
formats for the revised certifications provided at the end of the Final 
Rule.\32\ The Department intends to reject factual submissions if the 
submitting party does not comply with the applicable revised 
certification requirements.
---------------------------------------------------------------------------

    \31\ See section 782(b) of the Act.
    \32\ See Certification of Factual Information to Import 
Administration During Antidumping and Countervailing Duty 
Proceedings, 78 FR 42678 (July 17, 2013) (``Final Rule''); see also 
frequently asked questions regarding the Final Rule, available at 
http://enforcement.trade.gov/tlei/notices/factual_info_final_rule_FAQ_07172013.pdf.
---------------------------------------------------------------------------

Notification to Interested Parties

    Interested parties must submit applications for disclosure under 
APO in accordance with 19 CFR 351.305. On January 22, 2008, the 
Department published Antidumping and Countervailing Duty Proceedings: 
Documents Submission Procedures; APO Procedures, 73 FR 3634 (January 
22, 2008). Parties wishing to participate in this investigation should 
ensure that they meet the requirements of these procedures (e.g., the 
filing of letters of appearance as discussed at 19 CFR 351.103(d)).
    This notice is issued and published pursuant to sections 702 and 
777(i) of the Act.

     Dated: April 17, 2017.
Ronald K. Lorentzen,
Acting Assistant Secretary for Enforcement and Compliance.

Appendix I

Scope of the Investigations

    The merchandise covered by these investigations are certain hot-
rolled products of carbon steel and alloy steel, in coils, of 
approximately round cross section, less than 19.00 mm in actual 
solid cross-sectional diameter. Specifically excluded are steel 
products possessing the above-noted physical characteristics and 
meeting the Harmonized Tariff Schedule of the United States (HTSUS) 
definitions for (a) stainless steel; (b) tool steel; (c) high-nickel 
steel; (d) ball bearing steel; or (e) concrete reinforcing bars and 
rods. Also excluded are free cutting steel (also known as free 
machining steel) products (i.e., products that contain by weight one 
or more of the following elements: 0.1 percent of more of lead, 0.05 
percent or more of bismuth, 0.08 percent or more of sulfur, more 
than 0.04 percent of phosphorous, more than 0.05 percent of 
selenium, or more than 0.01 percent of tellurium). All products 
meeting the physical description of subject merchandise that are not 
specifically excluded are included in this scope.
    The products under investigation are currently classifiable 
under subheadings 7213.91.3011, 7213.91.3015, 7213.91.3020, 
7213.91.3093, 7213.91.4500, 7213.91.6000, 7213.99.0030, 
7227.20.0030, 7227.20.0080, 7227.90.6010, 7227.90.6020, 
7227.90.6030, and 7227.90.6035 of the HTSUS. Products entered under 
subheadings 7213.99.0090 and 7227.90.6090 of the HTSUS may also be 
included in this scope if they meet the physical description of 
subject merchandise above. Although the HTSUS subheadings are 
provided for convenience and customs purposes, the written 
description of the scope of these proceedings is dispositive.

[FR Doc. 2017-08212 Filed 4-25-17; 8:45 am]
 BILLING CODE 3510-DS-P