[Federal Register Volume 82, Number 69 (Wednesday, April 12, 2017)]
[Notices]
[Pages 17692-17693]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-07292]


-----------------------------------------------------------------------

INTERNATIONAL TRADE COMMISSION

[Investigation Nos. 701-TA-561 and 731-TA-1317-1318, 1321-1325, and 
1327 (Final)]


Carbon and Alloy Steel Cut-to-Length Plate From Austria, Belgium, 
France, Germany, Italy, Japan, Korea, and Taiwan: Supplemental Schedule 
for the Subject Investigations.

AGENCY: International Trade Commission.

ACTION: Notice.

-----------------------------------------------------------------------

DATES: This notice is effective as of April 4, 2017.

FOR FURTHER INFORMATION CONTACT: Carolyn Carlson (202-205-3002), Office 
of Investigations, U.S. International Trade Commission, 500 E Street 
SW., Washington, DC 20436. Hearing-impaired persons can obtain 
information on this matter by contacting the Commission's TDD terminal 
on 202-205-1810. Persons with mobility impairments who will need 
special assistance in gaining access to the Commission should contact 
the Office of the Secretary at 202-205-2000. General information 
concerning the Commission may also be obtained by accessing its 
internet server (https://www.usitc.gov). The public record for these 
investigations may be viewed on the Commission's electronic docket 
(EDIS) at https://edis.usitc.gov.

SUPPLEMENTARY INFORMATION: Effective September 16, 2016, the Commission 
established a general schedule for the conduct of the final phase of 
its investigations on carbon and alloy steel cut-to-length plate from 
twelve countries.\1\ The Department of Commerce's preliminary 
determinations for imports from the eight countries identified above 
were published on September 14, 2016 and November 14, 2016.\2\ The 
Department of Commerce's amended preliminary determinations on imports 
of carbon and alloy steel cut-to-length plate from France and Germany 
were published on November 29, 2016 and December 2, 2016.\3\ The 
Department of Commerce's corrected amended

[[Page 17693]]

preliminary determination on imports of carbon and alloy steel cut-to-
length plate from France was published on December 15, 2016.\4\ The 
Department of Commerce's final determinations for imports from the 
eight countries identified above were published on April 4, 2017.\5\ 
The Commission, therefore, is issuing a supplemental schedule for its 
investigations on imports of carbon and alloy steel cut-to-length plate 
from Austria, Belgium, France, Germany, Italy, Japan, Korea, and 
Taiwan.
---------------------------------------------------------------------------

    \1\ Carbon and Alloy Steel Cut-to-Length Plate From Austria, 
Belgium, Brazil, China, France, Germany, Italy, Japan, Korea, South 
Africa, Taiwan, and Turkey; Scheduling of the Final Phase of 
Countervailing and Antidumping Duty Investigations, 81 FR 70440, 
October 12, 2016.
    \2\ Certain Carbon and Alloy Steel Cut-to-Length Plate From the 
Republic of Korea: Preliminary Negative Countervailing Duty 
Determination and Alignment of Final Determination With Final 
Antidumping Duty Determination, 81 FR 63168, September 14, 2016; 
Certain Carbon and Alloy Steel Cut-To-Length Plate From Austria: 
Preliminary Determination of Sales at Less Than Fair Value and 
Postponement of the Final Determination, 81 FR 79416, November 14, 
2016; Certain Carbon and Alloy Steel Cut-To-Length Plate From 
Belgium: Preliminary Determination of Sales at Less Than Fair Value 
and Postponement of Final Determination, 81 FR 79431, November 14, 
2016; Certain Carbon and Alloy Steel Cut-To-Length Plate From 
France: Preliminary Determination of Sales at Less Than Fair Value 
and Postponement of Final Determination, 81 FR 79437, November 14, 
2016; Certain Carbon and Alloy Steel Cut-To-Length Plate From the 
Federal Republic of Germany: Preliminary Determination of Sales at 
Less Than Fair Value and Postponement of Final Determination, 81 FR 
79446, November 14, 2016; Certain Carbon and Alloy Steel Cut-To-
Length Plate From Italy: Preliminary Determination of Sales at Less 
Than Fair Value, Affirmative Determination of Critical 
Circumstances, and Postponement of Final Determination, 81 FR 79423, 
November 14, 2016; Certain Carbon and Alloy Steel Cut-To-Length 
Plate From Japan: Preliminary Determination of Sales at Less Than 
Fair Value and Postponement of Final Determination, 81 FR 79427, 
November 14, 2016; Certain Carbon and Alloy Steel Cut-To-Length 
Plate From the Republic of Korea: Preliminary Determination of Sales 
at Less Than Fair Value and Postponement of Final Determination, 81 
FR 79441, November 14, 2016; Certain Carbon and Alloy Steel Cut-To-
Length Plate From Taiwan: Preliminary Determination of Sales at Less 
Than Fair Value, 81 FR 79420, November 14, 2016.
    \3\ Certain Carbon and Alloy Steel Cut-To-Length Plate From the 
Federal Republic of Germany: Amended Preliminary Determination of 
Sales at Less Than Fair Value, 81 FR 85930, November 29, 2016; 
Certain Carbon and Alloy Steel Cut-to-Length Plate From France: 
Amended Preliminary Determination of Sales at Less Than Fair Value, 
81 FR 87019, December 2, 2016.
    \4\ Certain Carbon and Alloy Steel Cut-to-Length Plate From 
France: Correction to the Amended Preliminary Determination of Sales 
at Less Than Fair Value, 81 FR 90780, December 15, 2016.
    \5\ Certain Carbon and Alloy Steel Cut-To-Length Plate From the 
Republic of Korea: Final Affirmative Countervailing Duty 
Determination and Final Negative Critical Circumstances 
Determination, 82 FR 16341, April 4, 2017; Certain Carbon and Alloy 
Steel Cut-To-Length Plate From Austria: Final Determination of Sales 
at Less Than Fair Value and Final Affirmative Determination of 
Critical Circumstances, 82 FR 16366, April 4, 2017; Certain Carbon 
and Alloy Steel Cut-To-Length Plate From Belgium: Final 
Determination of Sales at Less Than Fair Value and Final 
Determination of Critical Circumstances, in Part, 82 FR 16378, April 
4, 2017; Certain Carbon and Alloy Steel Cut-to-Length Plate From 
France: Final Determination of Sales at Less Than Fair Value, 82 FR 
16363, April 4, 2017; Certain Carbon and Alloy Steel Cut-to-Length 
Plate From the Federal Republic of Germany: Final Determination of 
Sales at Less Than Fair Value, 82 FR 16360, April 4, 2017; Certain 
Carbon and Alloy Steel Cut-to-Length Plate From Italy: Final 
Determination of Sales at Less Than Fair Value and Final Affirmative 
Determination of Critical Circumstances, 82 FR 16345, April 4, 2017; 
Certain Carbon and Alloy Steel Cut-to-Length Plate From Japan: Final 
Determination of Sales at Less Than Fair Value, 82 FR 16349, April 
4, 2017; Certain Carbon and Alloy Steel Cut-To-Length Plate From the 
Republic of Korea: Final Determination of Sales at Less Than Fair 
Value and Final Negative Critical Circumstances Determination, 82 FR 
16369, April 4, 2017; Certain Carbon and Alloy Steel Cut-To-Length 
Plate From Taiwan: Final Determination of Sales at Less Than Fair 
Value and Final Negative Determination of Critical Circumstances, 82 
FR 16372, April 4, 2017.
---------------------------------------------------------------------------

    The Commission's supplemental schedule is as follows: The deadline 
for filing supplemental party comments on Commerce's final 
determinations is April 12, 2017; the staff report in the final phase 
of these investigations will be placed in the nonpublic record on April 
24, 2017; and a public version will be issued thereafter.
    Supplemental party comments may address only Commerce's final 
determinations regarding imports from Austria, Belgium, France, 
Germany, Italy, Japan, Korea, and Taiwan. These supplemental final 
comments may not contain new factual information and may not exceed 
five (5) pages in length.
    For further information concerning these investigations see the 
Commission's notice cited above and the Commission's Rules of Practice 
and Procedure, part 201, subparts A and B (19 CFR part 201), and part 
207, subparts A and C (19 CFR part 207).

    Authority:  These investigations are being conducted under 
authority of title VII of the Tariff Act of 1930; this notice is 
published pursuant to section 207.21 of the Commission's rules.

    By order of the Commission.

     Issued: April 6, 2017
Lisa R. Barton,
Secretary to the Commission.
[FR Doc. 2017-07292 Filed 4-11-17; 8:45 am]
BILLING CODE 7020-02-P