[Federal Register Volume 82, Number 40 (Thursday, March 2, 2017)]
[Proposed Rules]
[Pages 12301-12303]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-03995]


 ========================================================================
 Proposed Rules
                                                 Federal Register
 ________________________________________________________________________
 
 This section of the FEDERAL REGISTER contains notices to the public of 
 the proposed issuance of rules and regulations. The purpose of these 
 notices is to give interested persons an opportunity to participate in 
 the rule making prior to the adoption of the final rules.
 
 ========================================================================
 

  Federal Register / Vol. 82, No. 40 / Thursday, March 2, 2017 / 
Proposed Rules  

[[Page 12301]]



DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2017-0125; Directorate Identifier 2016-NM-193-AD]
RIN 2120-AA64


Airworthiness Directives; Bombardier, Inc., Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice of proposed rulemaking (NPRM).

-----------------------------------------------------------------------

SUMMARY: We propose to adopt a new airworthiness directive (AD) for 
certain Bombardier, Inc., Model DHC-8-401 and DHC-8-402 airplanes. This 
proposed AD was prompted by a report that a pilot was unable to move 
the rudder pedal due to an obstruction. This proposed AD would require 
an inspection to determine if wiring shrouds are present, and modifying 
the wiring shrouds if necessary. We are proposing this AD to address 
the unsafe condition on these products.

DATES: We must receive comments on this proposed AD by April 17, 2017.

ADDRESSES: You may send comments, using the procedures found in 14 CFR 
11.43 and 11.45, by any of the following methods:
     Federal eRulemaking Portal: Go to http://www.regulations.gov. Follow the instructions for submitting comments.
     Fax: 202-493-2251.
     Mail: U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE., Washington, DC 20590.
     Hand Delivery: Deliver to Mail address above between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays.
    For service information identified in this NPRM, contact 
Bombardier, Inc., Q-Series Technical Help Desk, 123 Garratt Boulevard, 
Toronto, Ontario M3K 1Y5, Canada; telephone: 416-375-4000; fax: 416-
375-4539; email: [email protected]; Internet: http://www.bombardier.com. You may view this referenced service information at 
the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, 
WA. For information on the availability of this material at the FAA, 
call 425-227-1221.

Examining the AD Docket

    You may examine the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2017-
0125; or in person at the Docket Management Facility between 9 a.m. and 
5 p.m., Monday through Friday, except Federal holidays. The AD docket 
contains this proposed AD, the regulatory evaluation, any comments 
received, and other information. The street address for the Docket 
Operations office (telephone: 800-647-5527) is in the ADDRESSES 
section. Comments will be available in the AD docket shortly after 
receipt.

FOR FURTHER INFORMATION CONTACT: Cesar Gomez, Aerospace Engineer, 
Airframe and Mechanical Systems Branch, ANE-171, FAA, New York Aircraft 
Certification Office (ACO), 1600 Stewart Avenue, Suite 410, Westbury, 
NY 11590; telephone: 516-228-7318; fax: 516-794-5531.

SUPPLEMENTARY INFORMATION:

Comments Invited

    We invite you to send any written relevant data, views, or 
arguments about this proposed AD. Send your comments to an address 
listed under the ADDRESSES section. Include ``Docket No. FAA-2017-0125; 
Directorate Identifier 2016-NM-193-AD'' at the beginning of your 
comments. We specifically invite comments on the overall regulatory, 
economic, environmental, and energy aspects of this proposed AD. We 
will consider all comments received by the closing date and may amend 
this proposed AD based on those comments.
    We will post all comments we receive, without change, to http://www.regulations.gov, including any personal information you provide. We 
will also post a report summarizing each substantive verbal contact we 
receive about this proposed AD.

Discussion

    Transport Canada Civil Aviation (TCCA), which is the aviation 
authority for Canada, has issued Canadian AD CF-2016-27, dated 
September 14, 2016 (referred to after this as the Mandatory Continuing 
Airworthiness Information, or ``the MCAI''), to correct an unsafe 
condition for certain Bombardier, Inc., Model DHC-8-401 and DHC-8-402 
airplanes. The MCAI states:

    An operator reported that the flying pilot was unable to move 
the rudder pedal due to an obstruction caused by the non-flying 
pilot's foot. The shoe belonging to the non-flying pilot was placed 
between the rudder pedal and the newly installed wiring shroud and 
prevented rudder pedal movement. The wiring shroud was installed to 
support the wire harnesses installed below the cockpit instrument 
panel.
    If not corrected, this condition could prevent rudder movement 
during critical phases of flight or ground operation, and result in 
loss of control of the aeroplane.
    This [Canadian] AD was issued to re-work the wiring shrouds to 
eliminate potential for obstruction.

    Required actions include an inspection for the presence of wiring 
shrouds and modification of any existing wiring shrouds. You may 
examine the MCAI in the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2017-
0125.

Related Service Information Under 1 CFR Part 51

    We reviewed Bombardier Service Bulletin 84-25-169, Revision A, 
dated April 25, 2016. This service information describes procedures for 
an inspection to verify if wiring shrouds are installed, and 
modification of any existing wiring shrouds. This service information 
is reasonably available because the interested parties have access to 
it through their normal course of business or by the means identified 
in the ADDRESSES section.

FAA's Determination and Requirements of This Proposed AD

    This product has been approved by the aviation authority of another 
country, and is approved for operation in the United States. Pursuant 
to our bilateral agreement with the State of Design Authority, we have 
been notified of the unsafe condition described in the MCAI and service 
information

[[Page 12302]]

referenced above. We are proposing this AD because we evaluated all 
pertinent information and determined an unsafe condition exists and is 
likely to exist or develop on other products of the same type design.

Costs of Compliance

    We estimate that this proposed AD affects 82 airplanes of U.S. 
registry.
    We estimate the following costs to comply with this proposed AD:

                                                 Estimated Costs
----------------------------------------------------------------------------------------------------------------
                                                                                     Cost per      Cost on U.S.
            Action                         Labor cost               Parts cost        product        operators
----------------------------------------------------------------------------------------------------------------
Inspection...................  1 work-hour x $85 per hour = $85.              $0             $85          $6,970
----------------------------------------------------------------------------------------------------------------

    We estimate the following costs to do any necessary modifications 
that would be required based on the results of the proposed inspection. 
We have no way of determining the number of airplanes that might need 
these modifications:

                                               On-Condition Costs
----------------------------------------------------------------------------------------------------------------
                                                                                                     Cost per
                   Action                                 Labor cost                Parts cost        product
----------------------------------------------------------------------------------------------------------------
Modification of wiring shrouds.............  7 work-hours x $85 per hour = $595.             $71            $666
----------------------------------------------------------------------------------------------------------------

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. ``Subtitle VII: Aviation 
Programs,'' describes in more detail the scope of the Agency's 
authority.
    We are issuing this rulemaking under the authority described in 
``Subtitle VII, Part A, Subpart III, Section 44701: General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.

Regulatory Findings

    We determined that this proposed AD would not have federalism 
implications under Executive Order 13132. This proposed AD would not 
have a substantial direct effect on the States, on the relationship 
between the national Government and the States, or on the distribution 
of power and responsibilities among the various levels of government.
    For the reasons discussed above, I certify this proposed 
regulation:
    1. Is not a ``significant regulatory action'' under Executive Order 
12866;
    2. Is not a ``significant rule'' under the DOT Regulatory Policies 
and Procedures (44 FR 11034, February 26, 1979);
    3. Will not affect intrastate aviation in Alaska; and
    4. Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Proposed Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13   [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive (AD):

Bombardier, Inc.: Docket No. FAA-2017-0125; Directorate Identifier 
2016-NM-193-AD.

(a) Comments Due Date

    We must receive comments by April 17, 2017.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to Bombardier, Inc., Model DHC-8-401 and DHC-8-
402 airplanes, certificated in any category, as identified in 
Bombardier Service Bulletin 84-25-169, Revision A, dated April 25, 
2016.

(d) Subject

    Air Transport Association (ATA) of America Code 25, Equipment/
furnishings.

(e) Reason

    This AD was prompted by a report that a pilot was unable to move 
the rudder pedal due to an obstruction caused by the non-flying 
pilot's foot. We are issuing this AD to prevent an obstruction that 
could prevent rudder pedal movement during critical phases of flight 
or ground operations, potentially resulting in loss of control of 
the airplane.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Inspection and Modification of Wiring Shrouds

    Within 6 months after the effective date of this AD, do a one-
time inspection to determine if wiring shrouds are installed, in 
accordance with the Accomplishment Instructions of Bombardier 
Service Bulletin 84-25-169, Revision A, dated April 25, 2016.
    (1) If the airplane does not have wiring shrouds installed, no 
further action is required by this AD.
    (2) If the airplane has wiring shrouds installed, before further 
flight, modify the wiring shrouds in accordance with the 
Accomplishment Instructions of Bombardier Service Bulletin 84-25-
169, Revision A, dated April 25, 2016.
    Note 1 to paragraph (g) of this AD: Wiring shrouds were 
installed in accordance with Bombardier Modification Summary Package 
(ModSum) IS4Q2500035-1, Revision A, dated July 26, 2011; Revision B, 
dated October 10, 2013; Revision C, dated March 26, 2014; or 
Revision D, dated February 26, 2016; or ModSum IS4Q2500035-2, 
Revision A, dated July 26, 2011; Revision B, dated October 10, 2013; 
Revision C, dated March

[[Page 12303]]

26, 2014; or Revision D, dated February 26, 2016.

(h) Other FAA AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, New 
York Aircraft Certification Office (ACO), ANE-170 FAA, has the 
authority to approve AMOCs for this AD, if requested using the 
procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, 
send your request to your principal inspector or local Flight 
Standards District Office, as appropriate. If sending information 
directly to the ACO, send it to ATTN: Program Manager, Continuing 
Operational Safety, FAA, New York ACO, 1600 Stewart Avenue, Suite 
410, Westbury, NY 11590; telephone: 516-228-7300; fax: 516-794-5531. 
Before using any approved AMOC, notify your appropriate principal 
inspector, or lacking a principal inspector, the manager of the 
local flight standards district office/certificate holding district 
office.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain corrective actions from a manufacturer, the action must be 
accomplished using a method approved by the Manager, New York ACO, 
ANE-170, FAA; or Transport Canada Civil Aviation (TCCA); or 
Bombardier, Inc.'s TCCA Design Approval Organization (DAO). If 
approved by the DAO, the approval must include the DAO-authorized 
signature.

(i) Related Information

    (1) Refer to Mandatory Continuing Airworthiness Information 
(MCAI) Canadian AD CF-2016-27, dated September 14, 2016, for related 
information. This MCAI may be found in the AD docket on the Internet 
at http://www.regulations.gov by searching for and locating Docket 
No. FAA-2017-0125.
    (2) For service information identified in this AD, contact 
Bombardier, Inc., Q-Series Technical Help Desk, 123 Garratt 
Boulevard, Toronto, Ontario M3K 1Y5, Canada; telephone: 416-375-
4000; fax: 416-375-4539; email: [email protected]; 
Internet: http://www.bombardier.com. You may view this service 
information at the FAA, Transport Airplane Directorate, 1601 Lind 
Avenue SW., Renton, WA. For information on the availability of this 
material at the FAA, call 425-227-1221.

    Issued in Renton, Washington, on February 22, 2017.
Dionne Palermo,
Acting Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 2017-03995 Filed 3-1-17; 8:45 am]
 BILLING CODE 4910-13-P