[Federal Register Volume 82, Number 32 (Friday, February 17, 2017)]
[Notices]
[Pages 11056-11057]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2017-03150]


=======================================================================
-----------------------------------------------------------------------

INTERNATIONAL TRADE COMMISSION

[Investigation Nos. 701-TA-563 and 731-TA-1331-1333 (Final)]


Finished Carbon Steel Flanges From India, Italy and Spain; 
Scheduling of the Final Phase of Countervailing Duty and Antidumping 
Duty Investigations

AGENCY: United States International Trade Commission.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Commission hereby gives notice of the scheduling of the 
final phase of antidumping and countervailing duty investigation Nos. 
701-TA-563 and 731-TA-1331-1333 (Final) pursuant to the Tariff Act of 
1930 (``the Act'') to determine whether an industry in the United 
States is materially injured or threatened with material injury, or the 
establishment of an industry in the United States is materially 
retarded, by reason of imports of finished carbon steel flanges from 
India, Italy, and Spain, provided for in subheading 7307.91 of the 
Harmonized Tariff Schedule of the United States, preliminarily 
determined by the Department of Commerce to be subsidized by the 
government of India and sold at less-than-fair-value.\1\
---------------------------------------------------------------------------

    \1\ For purposes of these investigations, the Department of 
Commerce has defined the subject merchandise as finished carbon 
steel flanges. Finished carbon steel flanges differ from unfinished 
carbon steel flanges (also known as carbon steel flange forgings) in 
that they have undergone further processing after forging, 
including, but not limited to, beveling, bore threading, center or 
step boring, face machining, taper boring, machining ends or 
surfaces, drilling bolt holes, and/or deburring or shot blasting. 
Any one of these post-forging processes suffices to render the 
forging into a finished carbon steel flange for purposes of this 
investigation. However, mere heat treatment of a carbon steel flange 
forging (without any other further processing after forging) does 
not render the forging into a finished carbon steel flange for 
purposes of this investigation. For a full description of the scope 
of these investigations, see 82 FR 9711, 9719, and 9723, February 8, 
2017.

---------------------------------------------------------------------------
DATES: Effective February 8, 2017.

FOR FURTHER INFORMATION CONTACT: Drew Dushkes (202-205-3229), Office of 
Investigations, U.S. International Trade Commission, 500 E Street SW., 
Washington, DC 20436. Hearing-impaired persons can obtain information 
on this matter by contacting the Commission's TDD terminal on 202-205-
1810. Persons with mobility impairments who will need special 
assistance in gaining access to the Commission should contact the 
Office of the Secretary at 202-205-2000. General information concerning 
the Commission may also be obtained by accessing its internet server 
(https://www.usitc.gov). The public record for these investigations may 
be viewed on the Commission's electronic docket (EDIS) at https://edis.usitc.gov.

SUPPLEMENTARY INFORMATION: 
    Background.--The final phase of these investigations is being 
scheduled pursuant to sections 705(b) and 731(b) of the Tariff Act of 
1930 (19 U.S.C. 1671d(b) and 1673d(b)), as a result of affirmative 
preliminary determinations by the Department of Commerce that certain 
benefits which constitute subsidies within the meaning of section 703 
of the Act (19 U.S.C. 1671b) are being provided to manufacturers, 
producers, or exporters in India, Italy and Spain of finished carbon 
steel flanges, and that such products are being sold in the United 
States at less than fair value within the meaning of section 733 of the 
Act (19 U.S.C. 1673b). The investigations were requested in petitions 
filed on June 30, 2016, by Weldbend Corporation, Argo, Illinois and 
Boltex Mfg. Co., L.P., Houston, Texas.
    For further information concerning the conduct of this phase of the 
investigations, hearing procedures, and rules of general application, 
consult the Commission's Rules of Practice and Procedure, part 201, 
subparts A and B (19 CFR part 201), and part 207, subparts A and C (19 
CFR part 207).
    Participation in the investigations and public service list.--
Persons, including industrial users of the subject merchandise and, if 
the merchandise is sold at the retail level, representative consumer 
organizations, wishing to participate in the final phase of these 
investigations as parties must file an entry of appearance with the 
Secretary to the Commission, as provided in section 201.11 of the 
Commission's rules, no later than 21 days prior to the hearing date 
specified in this notice. A party that filed a notice of appearance 
during the preliminary phase of the investigations need not file an 
additional notice of appearance during this final phase. The Secretary 
will maintain a public service list containing the names and addresses 
of all persons, or their representatives, who are parties to the 
investigations.
    Limited disclosure of business proprietary information (BPI) under 
an administrative protective order (APO) and BPI service list.--
Pursuant to section 207.7(a) of the Commission's rules, the Secretary 
will make BPI gathered in the final phase of these investigations 
available to authorized applicants under the APO issued in the 
investigations, provided that the application is made no later than 21

[[Page 11057]]

days prior to the hearing date specified in this notice. Authorized 
applicants must represent interested parties, as defined by 19 U.S.C. 
1677(9), who are parties to the investigations. A party granted access 
to BPI in the preliminary phase of the investigations need not reapply 
for such access. A separate service list will be maintained by the 
Secretary for those parties authorized to receive BPI under the APO.
    Staff report.--The prehearing staff report in the final phase of 
these investigations will be placed in the nonpublic record on April 
11, 2017, and a public version will be issued thereafter, pursuant to 
section 207.22 of the Commission's rules.
    Hearing.--The Commission will hold a hearing in connection with the 
final phase of these investigations beginning at 9:30 a.m. on Tuesday, 
April 25, 2017, at the U.S. International Trade Commission Building. 
Requests to appear at the hearing should be filed in writing with the 
Secretary to the Commission on or before April 19, 2017. A nonparty who 
has testimony that may aid the Commission's deliberations may request 
permission to present a short statement at the hearing. All parties and 
nonparties desiring to appear at the hearing and make oral 
presentations should participate in a prehearing conference to be held 
on April 24, 2017, at the U.S. International Trade Commission Building, 
if deemed necessary. Oral testimony and written materials to be 
submitted at the public hearing are governed by sections 201.6(b)(2), 
201.13(f), and 207.24 of the Commission's rules. Parties must submit 
any request to present a portion of their hearing testimony in camera 
no later than 7 business days prior to the date of the hearing.
    Written submissions.--Each party who is an interested party shall 
submit a prehearing brief to the Commission. Prehearing briefs must 
conform with the provisions of section 207.23 of the Commission's 
rules; the deadline for filing is April 18, 2017. Parties may also file 
written testimony in connection with their presentation at the hearing, 
as provided in section 207.24 of the Commission's rules, and 
posthearing briefs, which must conform with the provisions of section 
207.25 of the Commission's rules. The deadline for filing posthearing 
briefs is May 1, 2017. In addition, any person who has not entered an 
appearance as a party to the investigations may submit a written 
statement of information pertinent to the subject of the 
investigations, including statements of support or opposition to the 
petition, on or before May 1, 2017. On May 16, 2017, the Commission 
will make available to parties all information on which they have not 
had an opportunity to comment. Parties may submit final comments on 
this information on or before May 18, 2017, but such final comments 
must not contain new factual information and must otherwise comply with 
section 207.30 of the Commission's rules. All written submissions must 
conform with the provisions of section 201.8 of the Commission's rules; 
any submissions that contain BPI must also conform with the 
requirements of sections 201.6, 207.3, and 207.7 of the Commission's 
rules. The Commission's Handbook on E-Filing, available on the 
Commission's Web site at https://edis.usitc.gov, elaborates upon the 
Commission's rules with respect to electronic filing.
    Additional written submissions to the Commission, including 
requests pursuant to section 201.12 of the Commission's rules, shall 
not be accepted unless good cause is shown for accepting such 
submissions, or unless the submission is pursuant to a specific request 
by a Commissioner or Commission staff.
    In accordance with sections 201.16(c) and 207.3 of the Commission's 
rules, each document filed by a party to the investigations must be 
served on all other parties to the investigations (as identified by 
either the public or BPI service list), and a certificate of service 
must be timely filed. The Secretary will not accept a document for 
filing without a certificate of service.

    Authority: These investigations are being conducted under 
authority of title VII of the Tariff Act of 1930; this notice is 
published pursuant to section 207.21 of the Commission's rules.

    By order of the Commission.

    Issued: February 13, 2017.
Lisa R. Barton,
Secretary to the Commission.
[FR Doc. 2017-03150 Filed 2-16-17; 8:45 am]
 BILLING CODE 7020-02-P