[Federal Register Volume 81, Number 219 (Monday, November 14, 2016)]
[Notices]
[Pages 79446-79450]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-27313]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-428-844]


Certain Carbon and Alloy Steel Cut-to-Length Plate From the 
Federal Republic of Germany: Preliminary Determination of Sales at Less 
Than Fair Value and Postponement of Final Determination

AGENCY: Enforcement and Compliance, International Trade Administration, 
Department of Commerce.
SUMMARY: The Department of Commerce (the Department) preliminarily 
determines that certain carbon and alloy steel cut-to-length plate (CTL 
plate) from the Federal Republic of Germany (Germany) is being, or is 
likely to be, sold in the United States at less than fair value (LTFV). 
The period of investigation (POI) is April 1, 2015, through March 31, 
2016. The estimated weighted-average dumping margins of sales at LTFV 
are shown in the ``Preliminary Determination'' section of this notice. 
Interested parties are invited to comment on this preliminary 
determination.

DATES: Effective November 14, 2016.

FOR FURTHER INFORMATION CONTACT: Ross Belliveau or David J. Goldberger, 
AD/CVD Operations, Office II, Enforcement and Compliance, International 
Trade

[[Page 79447]]

Administration, U.S. Department of Commerce, 1401 Constitution Avenue 
NW., Washington, DC 20230; telephone: (202) 482-4952 or (202) 482-4136, 
respectively.

SUPPLEMENTARY INFORMATION: 

Background

    The Department initiated this investigation on April 28, 2016.\1\ 
For a complete description of the events that followed the initiation 
of this investigation, see the memorandum that is dated concurrently 
with this determination and hereby adopted by this notice.\2\ A list of 
topics in the Preliminary Decision Memorandum is included as Appendix 
II to this notice.
---------------------------------------------------------------------------

    \1\ See Certain Carbon and Alloy Steel Cut-to-Length Plate From 
Austria, Belgium, Brazil, France, the Federal Republic of Germany, 
Italy, Japan, the Republic of Korea, the People's Republic of China, 
South Africa, Taiwan, and the Republic of Turkey: Initiation of 
Less-Than-Fair Value Investigations, 81 FR 27089 (May 5, 2016) 
(Initiation Notice).
    \2\ See Memorandum from Christian Marsh, Deputy Assistant 
Secretary for Antidumping and Countervailing Duty Operations, to 
Paul Piquado, Assistant Secretary for Enforcement and Compliance, 
entitled ``Decision Memorandum for the Preliminary Determination in 
the Antidumping Duty Investigation of Certain Carbon and Alloy Steel 
Cut-To-Length Plate From Germany'' (Preliminary Decision 
Memorandum), dated concurrently with this notice.
---------------------------------------------------------------------------

    The Preliminary Decision Memorandum is a public document and is 
made available to the public via Enforcement and Compliance's 
Antidumping and Countervailing Duty Centralized Electronic Service 
System (ACCESS). ACCESS is available to registered users at https://access.trade.gov, and is available to all parties in the Department's 
Central Records Unit, Room B8024 of the main Department of Commerce 
building. In addition, a complete version of the Preliminary Decision 
Memorandum can be accessed directly on the internet at http://enforcement.trade.gov/frn/. The signed Preliminary Decision Memorandum 
and the electronic version of the Preliminary Decision Memorandum are 
identical in content.

Scope of the Investigation

    The product covered by this investigation is CTL plate from 
Germany. For a full description of the scope of this investigation, see 
the ``Scope of the Investigation,'' in Appendix I of this notice.

Scope Comments

    In accordance with the Preamble to the Department's regulations,\3\ 
the Initiation Notice set aside a period of time for parties to raise 
issues regarding product coverage, i.e., scope.\4\ Certain interested 
parties commented on the scope of the concurrent CTL plate 
investigations as it appeared in the Initiation Notice. For a summary 
of the product coverage comments and rebuttal responses submitted to 
the records of this and the concurrent CTL plate investigations, and a 
discussion and analysis of all comments timely received, see the 
Department's Preliminary Scope Decision Memorandum and the Department's 
Additional Preliminary Scope Decision Memorandum.\5\ The Department has 
preliminarily modified the scope language as it appeared in the 
Initiation Notice to clarify the exclusion for stainless steel plate, 
corrected two tariff numbers that were misidentified in the Petitions 
and in the Initiation Notice, and modified language pertaining to 
existing steel plate and hot-rolled flat-rolled steel orders.\6\
---------------------------------------------------------------------------

    \3\ See Antidumping Duties; Countervailing Duties; Final rule, 
62 FR 27296, 27323 (May 19, 1997) (Preamble).
    \4\ See Initiation Notice, 81 FR at 27090.
    \5\ See Memorandum to Christian Marsh, Deputy Assistant 
Secretary for Antidumping and Countervailing Duty Operations, 
entitled, ``Certain Carbon and Alloy Steel Cut-to-Length Plate From 
Austria, Belgium, Brazil, the People's Republic of China, France, 
the Federal Republic of Germany, Italy, Japan, the Republic of 
Korea, the Republic of South Africa, Taiwan, and Turkey: Scope 
Comments Decision Memorandum for the Preliminary Determinations,'' 
dated September 6, 2016 (Preliminary Scope Decision Memorandum), and 
Memorandum to Christian Marsh, Deputy Assistant Secretary for 
Antidumping and Countervailing Duty Operations, entitled, ``Certain 
Carbon and Alloy Steel Cut-to-Length Plate From Austria, Belgium, 
Brazil, the People's Republic of China, France, the Federal Republic 
of Germany, Italy, Japan, the Republic of Korea, the Republic of 
South Africa, Taiwan, and Turkey: Additional Scope Comments 
Preliminary Decision Memorandum and Extension of Deadlines for Scope 
Case Briefs and Scope Rebuttal Briefs,'' dated October 13, 2016 
(Additional Preliminary Scope Decision Memorandum), respectively.
    \6\ See Preliminary Scope Decision Memorandum at 2 and 56, and 
Additional Preliminary Scope Decision Memorandum at 10-11 and 20.
---------------------------------------------------------------------------

Methodology

    The Department is conducting this investigation in accordance with 
section 731 of the Act. There are two mandatory respondents 
participating in this investigation, AG der Dillinger H[uuml]ttenwerke 
(Dillinger) and Ilsenburger Grobblech GmbH, Salzgitter Mannesmann 
Grobblech GmbH, Salzgitter Flachstahl GmbH, and Salzgitter Mannesmann 
International GmbH (collectively, Salzgitter).\7\ Export price and, 
where appropriate, constructed export price, are calculated in 
accordance with section 772 of the Tariff Act of 1930, as amended (the 
Act). Normal value (NV) is calculated in accordance with section 773 of 
the Act. For a full description of the methodology underlying our 
preliminary conclusions, see the Preliminary Decision Memorandum.
---------------------------------------------------------------------------

    \7\ See Memorandum to Melissa G. Skinner, Director, AD/CVD 
Operations Office II, entitled, ``Whether to Collapse Salzgitter 
Mannesmann International GmbH and its Affiliated Producers in the 
Antidumping Duty Investigation of Certain Carbon and Alloy Steel 
Cut-to-Length Plate (CTL Plate) from the Federal Republic of Germany 
(Germany),'' dated October 27, 2016.
---------------------------------------------------------------------------

All-Others Rate

    Consistent with sections 733(d)(1)(A)(ii) and 735(c)(5) of the Act, 
the Department also calculated an estimated all-others rate. Section 
735(c)(5)(A) of the Act provides that the estimated all-others rate 
shall be an amount equal to the weighted average of the estimated 
weighted-average dumping margins established for exporters and 
producers individually investigated, excluding any zero, and de minimis 
margins, and any margins determined entirely under section 776 of the 
Act. Because we calculated a de minimis weighted average dumping margin 
for Salzgitter, we have based the all-others rate on the estimated 
weighted-average dumping margin calculated for Dillinger, the other 
mandatory respondent in this investigation.

Preliminary Determination

    The Department preliminarily determines that CTL plate from Germany 
is being, or is likely to be, sold in the United States at LTFV, 
pursuant to section 733 of the Act, and that the following estimated 
weighted-average dumping margins exist:

------------------------------------------------------------------------
                                                        Weighted-average
                Exporter/manufacturer                    dumping margin
                                                           (percent)
------------------------------------------------------------------------
AG der Dillinger H[uuml]ttenwerke....................               6.56
Ilsenburger Grobblech GmbH, Salzgitter Mannesmann                   0.00
 Grobblech GmbH, Salzgitter Flachstahl GmbH, and
 Salzgitter Mannesmann International GmbH............
All[dash]Others......................................               6.56
------------------------------------------------------------------------

Suspension of Liquidation

    In accordance with section 733(d)(2) of the Act, we will direct 
U.S. Customs and Border Protection (CBP) to suspend liquidation of all 
entries of subject merchandise from Germany, with the exception of 
those produced and/or exported by Salzgitter, as described in Appendix 
I of this notice, which are entered, or withdrawn from warehouse, for 
consumption on or after the date of publication of this notice in the 
Federal

[[Page 79448]]

Register. Because the estimated preliminary weighted-average dumping 
margin for Salzgitter is zero, we are not directing CBP to suspend 
liquidation of entries of the merchandise it produced and/or exported.
    Pursuant to section 733(d) of the Act and 19 CFR 351.205(d), we 
will instruct CBP to require cash deposits \8\ equal to the weighted-
average amount by which the NV exceeds U.S. price, as indicated in the 
chart above, as follows: (1) The rate for the mandatory respondents 
listed above will be the respondent-specific rates we determined in 
this preliminary determination; (2) if the exporter is not a mandatory 
respondent identified above, but the producer is, the rate will be the 
specific rate established for the producer of the subject merchandise; 
and (3) the rate for all other producers or exporters will be the all-
others rate. These suspension of liquidation instructions will remain 
in effect until further notice.
---------------------------------------------------------------------------

    \8\ See Modification of Regulations Regarding the Practice of 
Accepting Bonds During the Provisional Measures Period in 
Antidumping and Countervailing Duty Investigations, 76 FR 61042 
(October 3, 2011).
---------------------------------------------------------------------------

Disclosure

    We intend to disclose the calculations performed to interested 
parties in this proceeding within five days of the date of the public 
announcement of this notice in accordance with 19 CFR 351.224(b).

Verification

    As provided in section 782(i) of the Act, we intend to verify 
information relied upon in making our final determination.

Public Comment

    Interested parties are invited to comment on this preliminary 
determination. Case briefs or other written comments may be submitted 
to the Assistant Secretary for Enforcement and Compliance no later than 
seven days after the date on which the final verification report is 
issued in this proceeding, and rebuttal briefs, limited to issues 
raised in case briefs, may be submitted no later than five days after 
the deadline date for case briefs.\9\ Pursuant to 19 CFR 351.309(c)(2) 
and (d)(2), parties who submit case briefs or rebuttal briefs in this 
proceeding are encouraged to submit with each argument: (1) A statement 
of the issue; (2) a brief summary of the argument; and (3) a table of 
authorities.
---------------------------------------------------------------------------

    \9\ See 19 CFR 351.309; see also 19 CFR 351.303 (for general 
filing requirements).
---------------------------------------------------------------------------

    The Department established separate deadlines for interested 
parties to provide comments on scope issues.\10\ Specifically, case 
briefs on scope issues were to be submitted no later than October 21, 
2016. Scope rebuttal briefs, limited to issues raised in the scope case 
briefs, were to be submitted no later than November 1, 2016.\11\ The 
Department explained that parties should limit comments on scope issues 
to their scope case brief and their scope rebuttal brief.\12\ Thus, 
comments on scope issues belong in parties' scope case briefs and scope 
rebuttal briefs only and not in other case briefs and rebuttal briefs 
submitted in this investigation. The Department intends to address 
parties' scope comments in a final scope memorandum.
---------------------------------------------------------------------------

    \10\ See Preliminary Scope Decision Memorandum; Additional 
Preliminary Scope Decision Memorandum; Memorandum to the File 
``Deadlines for Submitting Scope Case Briefs and Scope Rebuttal 
Briefs,'' dated October 18, 2016 (Deadline Memo for Scope Briefs); 
and Memorandum to the File ``Extension of Deadline for Submitting 
Scope Rebuttal Briefs,'' dated October 28, 2016 (Extension Memo for 
Scope Rebuttal Briefs).
    \11\ See Deadline Memo for Scope Briefs and Extension Memo for 
Scope Rebuttal Briefs.
    \12\ See e.g., Deadline Memo for Scope Briefs.
---------------------------------------------------------------------------

    Pursuant to 19 CFR 351.310(c), interested parties who wish to 
request a hearing must submit a written request to the Assistant 
Secretary for Enforcement and Compliance, U.S. Department of Commerce 
within 30 days after the date of publication of this notice. Requests 
should contain the party's name, address, and telephone number, the 
number of participants, and a list of the issues to be discussed. If a 
request for a hearing is made, the Department intends to hold the 
hearing at the U.S. Department of Commerce, 1401 Constitution Avenue 
NW., Washington, DC 20230, at a time and date to be determined. Parties 
should confirm by telephone the date, time, and location of the hearing 
two days before the scheduled date.
    All documents must be filed electronically using ACCESS. An 
electronically-filed request must be received successfully in its 
entirety by ACCESS by 5:00 p.m. Eastern Standard Time.

Postponement of Final Determination and Extension of Provisional 
Measures

    Section 735(a)(2) of the Act provides that a final determination 
may be postponed until not later than 135 days after the date of the 
publication of the preliminary determination if, in the event of an 
affirmative preliminary determination, a request for such postponement 
is made by exporters who account for a significant proportion of 
exports of the subject merchandise, or in the event of a negative 
preliminary determination, a request for such postponement is made by 
the petitioner. 19 CFR 351.210(e)(2) requires that requests by 
respondents for postponement of a final determination be accompanied by 
a request for extension of provisional measures from a four-month 
period to a period not more than six months in duration.
    Respondents Dillinger and Salzgitter have requested that, in the 
event of an affirmative preliminary determination in this 
investigation, the Department postpone its final determination by 60 
days (i.e., to 135 days after publication of the preliminary 
determination).\13\ Further, Salzgitter agreed to extend the 
application of the provisional measures prescribed under section 733(d) 
of the Act and 19 CFR 351.210(e)(2), from a four-month period to a 
period not to exceed six months.
---------------------------------------------------------------------------

    \13\ See letter from Dillinger entitled, ``Certain Carbon and 
Alloy Steel Cut-To-Length Plate from the Federal Republic of 
Germany: Request for Extension of Final Determination,'' dated 
October 17, 2016; and letter from Salzgitter entitled, ``Antidumping 
Duty Investigation of Certain Carbon and Alloy Steel Cut-to-Length 
Plate from the Federal Republic of Germany (``Germany''): Request to 
Postpone Final Determination,'' dated October 20, 2016.
---------------------------------------------------------------------------

    In accordance with section 735(a)(2)(A) of the Act and 19 CFR 
351.210(b)(2)(ii), because (1) our preliminary determination is 
affirmative; (2) Salzgitter accounts for a significant proportion of 
exports of the subject merchandise; and (3) no compelling reasons for 
denial exist, we are postponing the final determination until no later 
than 135 days after the publication of this notice in the Federal 
Register and extending the provisional measures from a four-month 
period to a period not greater than six months. Accordingly, we will 
issue our final determination no later than 135 days after the date of 
publication of this preliminary determination, pursuant to section 
735(a)(2) of the Act.\14\
---------------------------------------------------------------------------

    \14\ See 19 CFR 351.210(b)(2) and (e).
---------------------------------------------------------------------------

International Trade Commission (ITC) Notification

    In accordance with section 733(f) of the Act, we are notifying the 
ITC of our affirmative preliminary determination of sales at LTFV. If 
our final determination is affirmative, the ITC will determine before 
the later of 120 days after the date of this preliminary determination 
or 45 days after our final determination whether these imports are 
materially injuring, or threaten material injury to, the U.S. industry.
    This determination is issued and published in accordance with 
sections 733(f) and 777(i)(1) of the Act and 19 CFR 351.205(c).


[[Page 79449]]


    Dated: November 4, 2016.
Paul Piquado,
Assistant Secretary for Enforcement and Compliance.

Appendix I--Scope of the Investigation

    The products covered by this investigation are certain carbon 
and alloy steel hot-rolled or forged flat plate products not in 
coils, whether or not painted, varnished, or coated with plastics or 
other non-metallic substances (cut-to-length plate). Subject 
merchandise includes plate that is produced by being cut-to-length 
from coils or from other discrete length plate and plate that is 
rolled or forged into a discrete length. The products covered 
include (1) Universal mill plates (i.e., flat-rolled products rolled 
on four faces or in a closed box pass, of a width exceeding 150 mm 
but not exceeding 1250 mm, and of a thickness of not less than 4 mm, 
which are not in coils and without patterns in relief), and (2) hot-
rolled or forged flat steel products of a thickness of 4.75 mm or 
more and of a width which exceeds 150 mm and measures at least twice 
the thickness, and which are not in coils, whether or not with 
patterns in relief. The covered products described above may be 
rectangular, square, circular or other shapes and include products 
of either rectangular or non-rectangular cross-section where such 
non-rectangular cross-section is achieved subsequent to the rolling 
process, i.e., products which have been ``worked after rolling'' 
(e.g., products which have been beveled or rounded at the edges).
    For purposes of the width and thickness requirements referenced 
above, the following rules apply:
    (1) Except where otherwise stated where the nominal and actual 
thickness or width measurements vary, a product from a given subject 
country is within the scope if application of either the nominal or 
actual measurement would place it within the scope based on the 
definitions set forth above; and
    (2) where the width and thickness vary for a specific product 
(e.g., the thickness of certain products with non-rectangular cross-
section, the width of certain products with non-rectangular shape, 
etc.), the measurement at its greatest width or thickness applies.
    Steel products included in the scope of this investigation are 
products in which: (1) Iron predominates, by weight, over each of 
the other contained elements; and (2) the carbon content is 2 
percent or less by weight.
    Subject merchandise includes cut-to-length plate that has been 
further processed in the subject country or a third country, 
including but not limited to pickling, oiling, levelling, annealing, 
tempering, temper rolling, skin passing, painting, varnishing, 
trimming, cutting, punching, beveling, and/or slitting, or any other 
processing that would not otherwise remove the merchandise from the 
scope of the investigation if performed in the country of 
manufacture of the cut-to-length plate.
    All products that meet the written physical description, are 
within the scope of this investigation unless specifically excluded 
or covered by the scope of an existing order. The following products 
are outside of, and/or specifically excluded from, the scope of this 
investigation:
    (1) Products clad, plated, or coated with metal, whether or not 
painted, varnished or coated with plastic or other non-metallic 
substances;
    (2) military grade armor plate certified to one of the following 
specifications or to a specification that references and 
incorporates one of the following specifications:
     MIL-A-12560,
     MIL-DTL-12560H,
     MIL-DTL-12560J,
     MIL-DTL-12560K,
     MIL-DTL-32332,
     MIL-A-46100D,
     MIL-DTL-46100-E,
     MIL-46177C,
     MIL-S-16216K Grade HY80,
     MIL-S-16216K Grade HY100,
     MIL-S-24645A HSLA-80;
     MIL-S-24645A HSLA-100,
     T9074-BD-GIB-010/0300 Grade HY80,
     T9074-BD-GIB-010/0300 Grade HY100,
     T9074-BD-GIB-010/0300 Grade HSLA80,
     T9074-BD-GIB-010/0300 Grade HSLA100, and
     T9074-BD-GIB-010/0300 Mod. Grade HSLA115,

except that any cut-to-length plate certified to one of the above 
specifications, or to a military grade armor specification that 
references and incorporates one of the above specifications, will 
not be excluded from the scope if it is also dual- or multiple-
certified to any other non-armor specification that otherwise would 
fall within the scope of this order;
    (3) stainless steel plate, containing 10.5 percent or more of 
chromium by weight and not more than 1.2 percent of carbon by 
weight;
    (4) CTL plate meeting the requirements of ASTM A-829, Grade E 
4340 that are over 305 mm in actual thickness;
    (5) Alloy forged and rolled CTL plate greater than or equal to 
152.4 mm in actual thickness meeting each of the following 
requirements:
    (a) Electric furnace melted, ladle refined & vacuum degassed and 
having a chemical composition (expressed in weight percentages):
     Carbon 0.23-0.28,
     Silicon 0.05-0.20,
     Manganese 1.20-1.60,
     Nickel not greater than 1.0,
     Sulfur not greater than 0.007,
     Phosphorus not greater than 0.020,
     Chromium 1.0-2.5,
     Molybdenum 0.35-0.80,
     Boron 0.002-0.004,
     Oxygen not greater than 20 ppm,
     Hydrogen not greater than 2 ppm, and
     Nitrogen not greater than 60 ppm;
    (b) With a Brinell hardness measured in all parts of the product 
including mid thickness falling within one of the following ranges:
    (i) 270-300 HBW,
    (ii) 290-320 HBW, or
    (iii) 320-350HBW;
    (c) Having cleanliness in accordance with ASTM E45 method A 
(Thin and Heavy): A not exceeding 1.5, B not exceeding 1.0, C not 
exceeding 0.5, D not exceeding 1.5; and
    (d) Conforming to ASTM A578-S9 ultrasonic testing requirements 
with acceptance criteria 2 mm flat bottom hole;
    (6) Alloy forged and rolled steel CTL plate over 407 mm in 
actual thickness and meeting the following requirements:
    (a) Made from Electric Arc Furnace melted, Ladle refined & 
vacuum degassed, alloy steel with the following chemical composition 
(expressed in weight percentages):
     Carbon 0.23-0.28,
     Silicon 0.05-0.15,
     Manganese 1.20-1.50,
     Nickel not greater than 0.4,
     Sulfur not greater than 0.010,
     Phosphorus not greater than 0.020,
     Chromium 1.20-1.50,
     Molybdenum 0.35-0.55,
     Boron 0.002-0.004,
     Oxygen not greater than 20 ppm,
     Hydrogen not greater than 2 ppm, and
     Nitrogen not greater than 60 ppm;
    (b) Having cleanliness in accordance with ASTM E45 method A 
(Thin and Heavy): A not exceeding 1.5, B not exceeding 1.5, C not 
exceeding 1.0, D not exceeding 1.5;
    (c) Having the following mechanical properties:
    (i) With a Brinell hardness not more than 237 HBW measured in 
all parts of the product including mid thickness; and having a Yield 
Strength of 75ksi min and UTS 95ksi or more, Elongation of 18% or 
more and Reduction of area 35% or more; having charpy V at -75 
degrees F in the longitudinal direction equal or greater than 15 ft. 
lbs (single value) and equal or greater than 20 ft. lbs (average of 
3 specimens) and conforming to the requirements of NACE MR01-75; or
    (ii) With a Brinell hardness not less than 240 HBW measured in 
all parts of the product including mid thickness; and having a Yield 
Strength of 90 ksi min and UTS 110 ksi or more, Elongation of 15% or 
more and Reduction of area 30% or more; having charpy V at -40 
degrees F in the longitudinal direction equal or greater than 21 ft. 
lbs (single value) and equal or greater than 31 ft. lbs (average of 
3 specimens);
    (d) Conforming to ASTM A578-S9 ultrasonic testing requirements 
with acceptance criteria 3.2 mm flat bottom hole; and
    (e) Conforming to magnetic particle inspection in accordance 
with AMS 2301;
    (7) Alloy forged and rolled steel CTL plate over 407 mm in 
actual thickness and meeting the following requirements:
    (a) Made from Electric Arc Furnace melted, Ladle refined & 
vacuum degassed, alloy steel with the following chemical composition 
(expressed in weight percentages):
     Carbon 0.23-0.28,
     Silicon 0.05-0.15,
     Manganese 1.20-1.50,
     Nickel not greater than 0.4,
     Sulfur not greater than 0.010,
     Phosphorus not greater than 0.020,
     Chromium 1.20-1.50,
     Molybdenum 0.35-0.55,
     Boron 0.002-0.004,
     Oxygen not greater than 20 ppm,
     Hydrogen not greater than 2 ppm, and
     Nitrogen not greater than 60 ppm;
    (b) Having cleanliness in accordance with ASTM E45 method A 
(Thin and Heavy): A

[[Page 79450]]

not exceeding 1.5, B not exceeding 1.5, C not exceeding 1.0, D not 
exceeding 1.5;
    (c) Having the following mechanical properties:
    (i) With a Brinell hardness not more than 237 HBW measured in 
all parts of the product including mid thickness; and having a Yield 
Strength of 75ksi min and UTS 95ksi or more, Elongation of 18% or 
more and Reduction of area 35% or more; having charpy V at -75 
degrees F in the longitudinal direction equal or greater than 15 ft. 
lbs (single value) and equal or greater than 20 ft. lbs (average of 
3 specimens) and conforming to the requirements of NACE MR01-75; or
    (ii) With a Brinell hardness not less than 240 HBW measured in 
all parts of the product including mid thickness; and having a Yield 
Strength of 90 ksi min and UTS 110 ksi or more, Elongation of 15% or 
more and Reduction of area 30% or more; having charpy V at -40 
degrees F in the longitudinal direction equal or greater than 21 ft. 
lbs (single value) and equal or greater than 31 ft. lbs (average of 
3 specimens);
    (d) Conforming to ASTM A578-S9 ultrasonic testing requirements 
with acceptance criteria 3.2 mm flat bottom hole; and
    (e) Conforming to magnetic particle inspection in accordance 
with AMS 2301;
    (7) Alloy forged and rolled steel CTL plate over 407 mm in 
actual thickness and meeting the following requirements:
    (a) Made from Electric Arc Furnace melted, ladle refined & 
vacuum degassed, alloy steel with the following chemical composition 
(expressed in weight percentages):
     Carbon 0.25-0.30,
     Silicon not greater than 0.25,
     Manganese not greater than 0.50,
     Nickel 3.0-3.5,
     Sulfur not greater than 0.010,
     Phosphorus not greater than 0.020,
     Chromium 1.0-1.5,
     Molybdenum 0.6-0.9,
     Vanadium 0.08 to 0.12
     Boron 0.002-0.004,
     Oxygen not greater than 20 ppm,
     Hydrogen not greater than 2 ppm, and
     Nitrogen not greater than 60 ppm.
    (b) Having cleanliness in accordance with ASTM E45 method A 
(Thin and Heavy): A not exceeding 1.0(t) and 0.5(h), B not exceeding 
1.5(t) and 1.0(h), C not exceeding 1.0(t) and 0.5(h), and D not 
exceeding 1.5(t) and 1.0(h);
    (c) Having the following mechanical properties: A Brinell 
hardness not less than 350 HBW measured in all parts of the product 
including mid thickness; and having a Yield Strength of 145ksi or 
more and UTS 160ksi or more, Elongation of 15% or more and Reduction 
of area 35% or more; having charpy V at -40 degrees F in the 
transverse direction equal or greater than 20 ft. lbs (single value) 
and equal or greater than 25 ft. lbs (average of 3 specimens);
    (d) Conforming to ASTM A578-S9 ultrasonic testing requirements 
with acceptance criteria 3.2 mm flat bottom hole; and
    (e) Conforming to magnetic particle inspection in accordance 
with AMS 2301.
    The products subject to the investigation are currently 
classified in the Harmonized Tariff Schedule of the United States 
(HTSUS) under item numbers: 7208.40.3030, 7208.40.3060, 
7208.51.0030, 7208.51.0045, 7208.51.0060, 7208.52.0000, 
7211.13.0000, 7211.14.0030, 7211.14.0045, 7225.40.1110, 
7225.40.1180, 7225.40.3005, 7225.40.3050, 7226.20.0000, and 
7226.91.5000.
    The products subject to the investigation may also enter under 
the following HTSUS item numbers: 7208.40.6060, 7208.53.0000, 
7208.90.0000, 7210.70.3000, 7210.90.9000, 7211.19.1500, 
7211.19.2000, 7211.19.4500, 7211.19.6000, 7211.19.7590, 
7211.90.0000, 7212.40.1000, 7212.40.5000, 7212.50.0000, 
7214.10.0000, 7214.30.0010, 7214.30.0080, 7214.91.0015, 
7214.91.0060, 7214.91.0090, 7225.11.0000, 7225.19.0000, 
7225.40.5110, 7225.40.5130, 7225.40.5160, 7225.40.7000, 
7225.99.0010, 7225.99.0090, 7226.11.1000, 7226.11.9060, 
7226.19.1000, 7226.19.9000, 7226.91.0500, 7226.91.1530, 
7226.91.1560, 7226.91.2530, 7226.91.2560, 7226.91.7000, 
7226.91.8000, and 7226.99.0180.
    The HTSUS subheadings above are provided for convenience and 
customs purposes only. The written description of the scope of the 
investigation is dispositive.

Appendix II--List of Topics Discussed in the Preliminary Decision 
Memorandum

I. Summary
II. Background
III. Period of Investigation
IV. Scope Comments
V. Discussion of the Methodology
    a. Determination of Comparison Method
    b. Results of the Differential Pricing Analysis
VI. Date of Sale
VII. Product Comparisons
VIII. Export Price/Constructed Export Price
IX. Normal Value
    a. Home Market Viability
    b. Affiliated-Party Transactions and Arm's-Length Test
    c. Level of Trade
    d. Cost of Production Analysis
    1. Calculation of COP
    2. Test of Comparison Market Sales Prices
    3. Results of the COP Test
    e. Calculation of NV Based on Comparison-Market Prices
    f. Price-to-Constructed Value Comparison
X. Currency Conversion
XI. Conclusion

[FR Doc. 2016-27313 Filed 11-10-16; 8:45 am]
 BILLING CODE 3510-DS-P