[Federal Register Volume 81, Number 158 (Tuesday, August 16, 2016)]
[Notices]
[Pages 54661-54662]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-19414]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Pipeline and Hazardous Materials Safety Administration

[Docket No. PHMSA-2016-0040; Notice No. 2016-04]


Hazardous Materials: Termination of Competent Authority 
Manufacturing Approvals

AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), 
DOT.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: This notice is to advise interested persons that PHMSA has 
terminated the manufacturing approvals listed herein. In November 2014, 
PHMSA attempted to contact all of the below listed manufacturing 
approval holders via written correspondence. In July 2015, PHMSA issued 
a Show Cause letter via certified mail requesting a response within 30 
days with their intent with respect to the approval. None of the 
companies complied with the requirements of the letter. Thus, PHMSA 
issued a Termination letter via certified mail in January 2016. To 
date, PHMSA has not received any correspondence concerning the below 
listed approval numbers.

FOR FURTHER INFORMATION CONTACT: Mr. Ryan Paquet, Director, Approvals 
and Permits Division, Office of Hazardous Materials Safety, (202) 366-
4512, PHMSA, 1200 New Jersey Avenue SE., Washington, DC 20590 or at 
[email protected].
    Correspondence with respect to the below listed approval numbers 
should be sent to [email protected] with a subject line ``Termination 
Letter'' and should be in writing; state in detail any alleged errors 
of fact and law; enclose any additional information needed to support 
the request; and state in detail the modification of the final decision 
sought.

SUPPLEMENTARY INFORMATION:

I. Introduction

    In this notice, PHMSA's Approvals and Permits Division is 
terminating the approvals listed below based on a change in 
circumstances rendering the approval no longer necessary (49 CFR 
107.713(b)(1)); and/or violations of your approval and the HMR that 
demonstrate a lack of fitness (49 CFR 107.713(b)(4)).

II. Background

    In November 2014, the Office of Hazardous Materials Safety Field 
Operations (OHMSFO) mailed a letter requesting approval status of the 
companies listed below. The companies listed below did not respond to 
the November 2014 request for information. In July 2015, PHMSA mailed a 
Show Cause letter to each of the companies listed below, requesting 
current approval status. The companies below did not respond to the 
Show Cause letter. In January 2016, PHMSA issued a Termination letter 
to each company listed below. To date, PHMSA has not received any 
correspondence from these companies. This Federal Register notice 
serves as an official announcement of termination of those approvals.

III. Action

    PHMSA has terminated the below listed approvals, and this Federal 
Register notice serves as an official announcement to the public.

IV. Approvals Terminated

------------------------------------------------------------------------
              ID No.                      Approval holder/company
------------------------------------------------------------------------
300b-87-03                         Industrias Vengas, S. A.
300b-96-02                         Tanques Para Gas, S.A.
300b-87-01                         Kanto Koatsu Yoki Mfg. Co.
807-06-01                          Hulett Cylinders
807-04-06                          Finetec Corporation
807-04-04                          Changzhou Aircraft Manufacture Co.
                                    Ltd.
300b-96-03                         Tanques Industriales Lajat, SA DE CV.
300b-92-02                         Chengdu High Pressure Vessel Factory.
807-07-01                          DACC Co., Ltd.
807-08-04                          Guangming Overseas Chinese Farms.
300b-84-03                         Primus Sievert AB.
300b-78-03                         MCS Cylinder Systems GmbH.
807-08-01                          Yongkang Yingpeng Chemical Machinery
                                    Co., Ltd.
300b-88-01                         Implementos Agricolas LA, S.A.
300b-98-03                         ROTH S.A.
300b-94-05                         ISI GmbH.
300b-83-02                         Cilbras.
300b-89-03                         Wolfedale Engineering Limited.
300b-93-02                         DDI Seamless Cylinder International
                                    Inc.
300b-88-02                         Bruin Engineered Parts, Inc.
807-04-01                          Yuxin Machinery Co., Ltd.
------------------------------------------------------------------------



[[Page 54662]]

    Issued in Washington, DC, on August 10, 2016, under authority 
delegated in 49 CFR part 107.
William S. Schoonover,
Deputy Associate Administrator, Pipeline and Hazardous Materials Safety 
Administration.
[FR Doc. 2016-19414 Filed 8-15-16; 8:45 am]
BILLING CODE 4910-60-P