[Federal Register Volume 81, Number 148 (Tuesday, August 2, 2016)]
[Notices]
[Pages 50785-50786]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-18270]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Highway Administration


Buy America Waiver Notification

AGENCY: Federal Highway Administration (FHWA), Department of 
Transportation (DOT).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: This notice provides information regarding FHWA's finding that 
a Buy America waiver is appropriate for the obligation of Federal-aid 
funds for 49 State projects involving the acquisition of vehicles and 
equipment on the condition that they be assembled in the U.S.

DATES: The effective date of the waiver is August 3, 2016.

FOR FURTHER INFORMATION CONTACT: For questions about this notice, 
please contact Mr. Gerald Yakowenko, FHWA Office of Program 
Administration, 202-366-1562, or via email at [email protected]. 
For legal questions, please contact Mr. William Winne, FHWA Office of 
the Chief Counsel, 202-366-1397, or via email at [email protected]. 
Office hours for the FHWA are from 8:00 a.m. to 4:30 p.m., e.t., Monday 
through Friday, except Federal holidays.

SUPPLEMENTARY INFORMATION: 

Electronic Access

    An electronic copy of this document may be downloaded from the 
Federal Register's home page at http://www.archives.gov and the 
Government Printing Office's database at http://www.access.gpo.gov/nara.

Background

    This notice provides information regarding FHWA's finding that a 
Buy America waiver is appropriate for the obligation of Federal-aid 
funds for 49 State projects involving the acquisition of vehicles 
(including sedans, vans, pickups, trucks, buses, and street sweepers) 
and equipment (such as trail grooming equipment) on the condition that 
they be assembled in the U.S. The waiver would apply to approximately 
196 vehicles and equipment acquisitions. The requests for the first 
quarter of calendar year 2016, available at http://www.fhwa.dot.gov/construction/contracts/cmaq160517.cfm, are incorporated by reference 
into this notice. These projects are being undertaken to implement air 
quality improvement, safety, and mobility goals under FHWA's Congestion 
Mitigation and Air Quality Improvement Program and the Recreational 
Trails Program.
    Title 23, Code of Federal Regulations, section 635.410 requires 
that steel or iron materials (including protective coatings) that will 
be permanently incorporated in a Federal-aid project must be 
manufactured in the U.S. For FHWA, this means that all the processes 
that modified the chemical content, physical shape or size, or final 
finish of the material (from initial melting and mixing, continuing 
through the bending and coating) occurred in the U.S. The statute and 
regulations create a process for granting waivers from the Buy America 
requirements when its application would be inconsistent with the public 
interest or when satisfactory quality domestic steel and iron products 
are not sufficiently available. In 1983, FHWA determined that it was 
both in the public interest and consistent with the legislative intent 
to waive Buy America for manufactured products other than steel 
manufactured products. However, FHWA's national waiver for manufactured 
products does not apply to the requests in this notice because they 
involve predominately steel and iron manufactured products. The FHWA's 
Buy America requirements do not have special provisions for applying 
Buy America to ``rolling stock'' such as vehicles or vehicle components 
(see 49 U.S.C. 5323(j)(2)(C), 49 CFR 661.11, and 49 U.S.C. 
24405(a)(2)(C) for examples of Buy America rolling stock provisions for 
other DOT agencies).
    Based on all the information available to the agency, FHWA 
concludes that there are no domestic manufacturers that produce the 
vehicles and vehicle components identified in this notice in such a way 
that their steel and iron elements are manufactured domestically. The 
FHWA's Buy America requirements were tailored to the types of products 
that are typically used in highway construction, which generally meet 
the requirement that steel and iron materials be manufactured 
domestically. In today's global industry, vehicles are assembled with 
iron and steel components that are manufactured all over the world. The 
FHWA is not aware of any domestically produced vehicle on the market 
that meets FHWA's Buy America requirement to have all its iron and 
steel be manufactured exclusively in the U.S. For example, the 
Chevrolet Volt, which was identified by many commenters in a November 
21, 2011, Federal Register Notice (76 FR 72027) as a car that is made 
in the U.S., is comprised of only 45 percent of U.S. and Canadian 
content according to the National Highway Traffic Safety 
Administration's Part 583 American Automobile Labeling Act Report Web 
page (http://www.nhtsa.gov/Laws+&+Regulations/Part+583+American+Automobile+Labeling+Act+(AALA)+Reports). Moreover, 
there is no indication of how much of this 45 percent content is U.S.-
manufactured (from initial melting and mixing) iron and steel content.
    In accordance with Division K, section 122 of the ``Consolidated 
and Further Continuing Appropriations Act, 2015'' (Pub. L. 113-235), 
FHWA published a notice of intent to issue a waiver on its Web site at 
http://www.fhwa.dot.gov/construction/contracts/waivers.cfm?id=126 on 
May 17. The FHWA received no comments in response to the publication.
    Based on FHWA's conclusion that there are no domestic manufacturers 
that can produce the vehicles and equipment identified in this notice 
in such a way that steel and iron materials are manufactured 
domestically, and after consideration of the comments received, FHWA 
finds that application of FHWA's Buy America requirements

[[Page 50786]]

to these products is inconsistent with the public interest (23 U.S.C. 
313(b)(1) and 23 CFR 635.410(c)(2)(i)). However, FHWA believes that it 
is in the public interest and consistent with the Buy America 
requirements to impose the condition that the vehicles and the vehicle 
components be assembled in the U.S. Requiring final assembly to be 
performed in the U.S. is consistent with past guidance to FHWA Division 
Offices on manufactured products (see Memorandum on Buy America Policy 
Response, Dec. 22, 1997, http://www.fhwa.dot.gov/programadmin/contracts/122297.cfm). A waiver of the Buy America requirement without 
any regard to where the vehicle is assembled would diminish the purpose 
of the Buy America requirement. Moreover, in today's economic 
environment, the Buy America requirement is especially significant in 
that it will ensure that Federal Highway Trust Fund dollars are used to 
support and create jobs in the U.S. This approach is similar to the 
conditional waivers previously given for various vehicle projects. 
Thus, so long as the final assembly of the 49 State projects occurs in 
the U.S., applicants to this waiver request may proceed to purchase 
these vehicles and equipment consistent with the Buy America 
requirement.
    In accordance with the provisions of section 117 of the ``Safe, 
Accountable, Flexible, Efficient Transportation Equity Act: A Legacy 
for Users, Technical Corrections Act of 2008'' (P.L. 110-244), FHWA is 
providing this notice of its finding that a public interest waiver of 
Buy America requirements is appropriate on the condition that the 
vehicles and equipment identified in the notice be assembled in the 
U.S. The FHWA invites public comment on this finding for an additional 
15 days following the effective date of the finding. Comments may be 
submitted to FHWA's Web site via the link provided to the waiver page 
noted above.

    Authority:  23 U.S.C. 313; P.L. 110-161, 23 CFR 635.410

    Issued on: July 22, 2016.
Gregory G. Nadeau,
Administrator, Federal Highway Administration.
[FR Doc. 2016-18270 Filed 8-1-16; 8:45 am]
 BILLING CODE 4910-22-P