[Federal Register Volume 81, Number 146 (Friday, July 29, 2016)]
[Notices]
[Pages 49976-49981]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-18015]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2016-0025; FRL-9949-63]


Certain New Chemicals; Receipt and Status Information for June 
2016

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA) 
to publish in the Federal Register a notice of receipt of a 
Premanufacture notice (PMN); an application for a test marketing 
exemption (TME), both pending and/or expired; and a periodic status 
report on any new chemicals under EPA review and the receipt of notices 
of commencement (NOC) to manufacture those chemicals. This document 
covers the period from June 1, 2016 to June 30, 2016.

DATES: Comments identified by the specific case number provided in this 
document, must be received on or before August 29, 2016.

ADDRESSES: Submit your comments, identified by docket identification 
(ID) number EPA-HQ-OPPT-2016-2016-0025, and the specific PMN number or 
TME number for the chemical related to your comment, by one of the 
following methods:
     Federal eRulemaking Portal: http://www.regulations.gov. 
Follow the online instructions for submitting comments. Do not submit 
electronically any information you consider to be Confidential Business 
Information (CBI) or other information whose disclosure is restricted 
by statute.
     Mail: Document Control Office (7407M), Office of Pollution 
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 
Pennsylvania Ave. NW., Washington, DC 20460-0001.
     Hand Delivery: To make special arrangements for hand 
delivery or delivery of boxed information, please follow the 
instructions at http://www.epa.gov/dockets/contacts.html.
    Additional instructions on commenting or visiting the docket, along 
with more information about dockets generally, is available at http://www.epa.gov/dockets.

FOR FURTHER INFORMATION CONTACT: For technical information contact: Jim 
Rahai, IMD 7407M, Office of Pollution Prevention and Toxics, 
Environmental Protection Agency, 1200 Pennsylvania Ave. NW., 
Washington, DC 20460-0001; telephone number: 202-564-8593; email 
address: [email protected].
    For general information contact: The TSCA-Hotline, ABVI-Goodwill, 
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 
554-1404; email address: [email protected].

SUPPLEMENTARY INFORMATION: 

I. General Information

A. Does this action apply to me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitters of the actions addressed in this 
document.

B. What should I consider as I prepare my comments for EPA?

    1. Submitting CBI. Do not submit this information to EPA through 
regulations.gov or email. Clearly mark the part or all of the 
information that you claim to be CBI. For CBI information in a disk or 
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as 
CBI and then identify electronically within the disk or CD-ROM the 
specific information that is claimed as CBI. In addition to one 
complete version of the comment that includes information claimed as 
CBI, a copy of the comment that does not contain the information 
claimed as CBI must be submitted for inclusion in the public docket. 
Information so marked will not be disclosed except in accordance with 
procedures set forth in 40 CFR part 2.
    2. Tips for preparing your comments. When preparing and submitting 
your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html.

II. What action is the agency taking?

    This document provides receipt and status reports, which cover the 
period from June 1, 2016 to June 30, 2016, and consists of the PMNs and 
TMEs both pending and/or expired, and the NOCs to manufacture a new 
chemical that the Agency has received under TSCA section 5 during this 
time period.

III. What is the agency's authority for taking this action?

    Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical 
substance as either an ``existing'' chemical or a ``new'' chemical. Any 
chemical substance that is not on EPA's TSCA Inventory is classified as 
a ``new chemical,'' while those that are on the TSCA Inventory are 
classified as an ``existing chemical.'' For more information about the 
TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm.
    Anyone who plans to manufacture or import a new chemical substance 
for a non-exempt commercial purpose is required by TSCA section 5 to 
provide EPA with a PMN, before initiating the activity. Section 5(h)(1) 
of TSCA authorizes EPA to allow persons, upon application, to 
manufacture (includes import) or process a new chemical substance, or a 
chemical substance subject to a significant new use rule (SNUR) issued 
under TSCA section 5(a), for ``test marketing'' purposes, which is 
referred to as a test marketing exemption, or TME. For more information 
about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems.
    Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish 
in the Federal Register a notice of receipt of a PMN or an application 
for a TME and to publish in the Federal Register periodic reports on 
the status of new chemicals under review and the receipt of NOCs to 
manufacture those chemicals.

[[Page 49977]]

IV. Receipt and Status Reports

    As used in each of the tables in this unit, (S) indicates that the 
information in the table is the specific information provided by the 
submitter, and (G) indicates that the information in the table is 
generic information because the specific information provided by the 
submitter was claimed as CBI.
    For the 60 PMNs received by EPA during this period, Table 1 
provides the following information (to the extent that such information 
is not claimed as CBI): The EPA case number assigned to the PMN; The 
date the PMN was received by EPA; the projected end date for EPA's 
review of the PMN; the submitting manufacturer/importer; the potential 
uses identified by the manufacturer/importer in the PMN; and the 
chemical identity.

                                                Table 1--PMNs Received From June 1, 2016 to June 30, 2016
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                          Projected
               Case No.                 Received date    notice  end     Manufacturer importer              Use                       Chemical
                                                            date
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-16-0273............................       6/13/2016       9/11/2016  CBI.....................  (G) Ingredient in metal   (G) Alkyl heteromonocycle,
                                                                                                  working fluids.           polymer with
                                                                                                                            heteromonocycle,
                                                                                                                            carboxyalkyl alkyl ether.
P-16-0345............................       6/13/2016       9/11/2016  CBI.....................  (G) Processing aid......  (G) Acrylamide, polymer with
                                                                                                                            methacrylic acid
                                                                                                                            derivatives.
P-16-0377............................        6/2/2016       8/31/2016  CBI.....................  (G) Film component......  (G) Polyester polyol.
P-16-0380............................        6/2/2016       8/31/2016  CBI.....................  (G) Component in          (G) Formic acid, compounds
                                                                                                  electrocoat resin.        (compds.) with hydrolyzed
                                                                                                                            bisphenol a-epichlorohydrin-
                                                                                                                            polyethylene glycol ether
                                                                                                                            with bisphenol a (2:1)
                                                                                                                            polymer-N1-(1,3-
                                                                                                                            dimethylbutylidene)-N2-[2-
                                                                                                                            [(1,3-
                                                                                                                            dimethylbutylidene)amino]-
                                                                                                                            ethyl]-1,2-ethanediamine-
                                                                                                                            dialdehyde-2-
                                                                                                                            (methylamino)ethanol
                                                                                                                            reaction products acetates
                                                                                                                            (salts).
P-16-0380............................        6/2/2016       8/31/2016  CBI.....................  (S) Anti-Crater additive  (G) Formic acid, compds. with
                                                                                                  for automotive            hydrolyzed bisphenol a-
                                                                                                  electrocoat resin.        epichlorohydrin-polyethylene
                                                                                                                            glycol ether with bisphenol
                                                                                                                            a (2:1) polymer-N1-(1,3-
                                                                                                                            dimethylbutylidene)-N2-[2-
                                                                                                                            [(1, 3-
                                                                                                                            dimethylbutylidene)amino]eth
                                                                                                                            yl]-1,2-ethanediamine-
                                                                                                                            dialdehyde-2-
                                                                                                                            (methylamino)ethanol
                                                                                                                            reaction products acetates
                                                                                                                            (salts).
P-16-0381............................        6/2/2016       8/31/2016  CBI.....................  (G) Component in          (G) Propanoic acid, 2-hydroxy-
                                                                                                  electrocoat resin.        , compds. with hydrolyzed
                                                                                                                            bisphenol a-epichlorohydrin-
                                                                                                                            polyethylene glycol ether
                                                                                                                            with bisphenol a (2:1)
                                                                                                                            polymer-N1-(1,3-
                                                                                                                            dimethylbutylidene)-N2-[2-
                                                                                                                            [(1,3-
                                                                                                                            dimethylbutylidene)amino]-
                                                                                                                            ethyl]-1,2-ethanediamine-
                                                                                                                            dialdehyde-2-
                                                                                                                            (methylamino)ethanol
                                                                                                                            reaction products formates
                                                                                                                            (salts).
P-16-0381............................        6/2/2016       8/31/2016  CBI.....................  (S) Anti-Crater additive  (G) Propanoic acid, 2-hydroxy-
                                                                                                  for automotive            , compds. with hydrolyzed
                                                                                                  electrocoat resin.        bisphenol a-epichlorohydrin-
                                                                                                                            polyethylene glycol ether
                                                                                                                            with bisphenol a (2:1)
                                                                                                                            polymer-N1-(1,3-
                                                                                                                            dimethylbutylidene)-N2-[2-
                                                                                                                            [(1, 3-
                                                                                                                            dimethylbutylidene)amino]-
                                                                                                                            ethyl]-1,2-ethanediamine-
                                                                                                                            dialdehyde-2-
                                                                                                                            (methylamino)ethanol
                                                                                                                            reaction products formates
                                                                                                                            (salts).
P-16-0382............................        6/2/2016       8/31/2016  CBI.....................  (G) Component in          (G) Formic acid, compds. with
                                                                                                  electrocoat resin.        hydrolyzed bisphenol a-
                                                                                                                            epichlorohydrin-polyethylene
                                                                                                                            glycol ether with bisphenol
                                                                                                                            a (2:1) polymer-N1-(1,3-
                                                                                                                            dimethylbutylidene)-N2-[2-
                                                                                                                            [(1, 3-
                                                                                                                            dimethylbutylidene)amino]eth
                                                                                                                            yl]-1,2-ethanediamine-
                                                                                                                            dialdehyde-2-
                                                                                                                            (methylamino)ethanol
                                                                                                                            reaction products
                                                                                                                            sulfamates(salts).
P-16-0382............................        6/2/2016       8/31/2016  CBI.....................  (S) Anti-Crater additive  (G) Formic acid, compds. with
                                                                                                  for automotive            hydrolyzed bisphenol a-
                                                                                                  electrocoat resin.        epichlorohydrin-polyethylene
                                                                                                                            glycol ether with bisphenol
                                                                                                                            a (2:1) polymer-N1-(1,3-
                                                                                                                            dimethylbutylidene)-N2-[2-
                                                                                                                            [(1, 3-
                                                                                                                            dimethylbutylidene)amino]eth
                                                                                                                            yl]-1,2-ethanediamine-
                                                                                                                            dialdehyde-2-
                                                                                                                            (methylamino)ethanol
                                                                                                                            reaction products sulfamates
                                                                                                                            (salts).
P-16-0383............................        6/2/2016       8/31/2016  CBI.....................  (S) Anti-Crater additive  (G) Formic acid, compds. with
                                                                                                  for automotive            hydrolyzed bisphenol a-
                                                                                                  electrocoat resin.        epichlorohydrin-polyethylene
                                                                                                                            glycol ether with bisphenol
                                                                                                                            a (2:1) polymer-N1-(1,3-
                                                                                                                            dimethylbutylidene)-N2-[2-
                                                                                                                            [(1, 3-
                                                                                                                            dimethylbutylidene)amino]eth
                                                                                                                            yl]-1,2-ethanediamine-
                                                                                                                            dialdehyde-2-
                                                                                                                            (methylamino)ethanol
                                                                                                                            reaction products acetates
                                                                                                                            (salts).

[[Page 49978]]

 
P-16-0384............................        6/2/2016       8/31/2016  CBI.....................  (G) Component of          (G) Propanoic acid, 2-hydroxy-
                                                                                                  electrocoat resin.        , compds. with hydrolyzed
                                                                                                                            bisphenol a-epichlorohydrin-
                                                                                                                            polyethylene glycol ether
                                                                                                                            with bisphenol a (2:1)
                                                                                                                            polymer-N1-(1,3-
                                                                                                                            dimethylbutylidene)-N2-[2-
                                                                                                                            [(1,3-
                                                                                                                            dimethylbutylidene)amino]-
                                                                                                                            ethyl]-1,2-ethanediamine-
                                                                                                                            dialdehyde-2-
                                                                                                                            (methylamino)ethanol
                                                                                                                            reaction products formates
                                                                                                                            (salts).
P-16-0384............................        6/2/2016       8/31/2016  CBI.....................  (S) Anti-Crater additive  (G) Propanoic acid, 2-hydroxy-
                                                                                                  for automotive            , compds. with hydrolyzed
                                                                                                  electrocoat resin.        bisphenol a-epichlorohydrin-
                                                                                                                            polyethylene glycol ether
                                                                                                                            with bisphenol a (2:1)
                                                                                                                            polymer-N1-(1,3-
                                                                                                                            dimethylbutylidene)-N2-[2-
                                                                                                                            [(1,3-
                                                                                                                            dimethylbutylidene)amino]-
                                                                                                                            ethyl]-1,2-ethanediamine-
                                                                                                                            dialdehyde-2-
                                                                                                                            (methylamino)ethanol
                                                                                                                            reaction products formates
                                                                                                                            (salts).
P-16-0385............................        6/2/2016       8/31/2016  CBI.....................  (G) Component in          (G) Formic acid, compds. with
                                                                                                  electrocoat resin.        hydrolyzed bisphenol a-
                                                                                                                            epichlorohydrin-polyethylene
                                                                                                                            glycol ether with bisphenol
                                                                                                                            a (2:1) polymer-N1-(1,3-
                                                                                                                            dimethylbutylidene)-N2-[2-
                                                                                                                            [(1, 3-
                                                                                                                            dimethylbutylidene)amino]eth
                                                                                                                            yl]-1,2-ethanediamine-
                                                                                                                            dialdehyde-2-
                                                                                                                            (methylamino)ethanol
                                                                                                                            reaction products
                                                                                                                            sulfamates(salts).
P-16-0385............................        6/2/2016       8/31/2016  CBI.....................  (S) Anti-Crater additive  (G) Formic acid, compds. with
                                                                                                  for automotive            hydrolyzed bisphenol a-
                                                                                                  electrocoat resin.        epichlorohydrin-polyethylene
                                                                                                                            glycol ether with bisphenol
                                                                                                                            a (2:1) polymer-N1-(1,3-
                                                                                                                            dimethylbutylidene)-N2-[2-
                                                                                                                            [(1, 3-
                                                                                                                            dimethylbutylidene)amino]eth
                                                                                                                            yl]-1,2-ethanediamine-
                                                                                                                            dialdehyde-2-
                                                                                                                            (methylamino)ethanol
                                                                                                                            reaction products
                                                                                                                            sulfamates(salts).
P-16-0394............................        6/7/2016        9/5/2016  CBI.....................  (G) Adhesive............  (G) Benzenedicarboxylic acid,
                                                                                                                            polymer with decanedioic
                                                                                                                            acid and dodecanedioic acid,
                                                                                                                            ethanediol, hexanedioic
                                                                                                                            acid, hexanediol, alpha-
                                                                                                                            hydro-omega-
                                                                                                                            hydroxypoly[oxy(methyl-1,2-
                                                                                                                            ethanediyl)],
                                                                                                                            isobenzofurandione,1,1'-
                                                                                                                            methylenebis[4-
                                                                                                                            isocyanatobenzene], phenol
                                                                                                                            and trimethylbicyclo hept-2-
                                                                                                                            ene.
P-16-0395............................        6/2/2016       8/31/2016  CBI.....................  (S) Polymeric             (G) Methacrylic acid, polymer
                                                                                                  intermediate for the      with alkyl methacrylates and
                                                                                                  production of acrylic     substituted acrylamide,
                                                                                                  polymers for industrial   ammonium salt.
                                                                                                  coatings.
P-16-0396............................        6/2/2016       8/31/2016  CBI.....................  (G) Specialty chemical    (G) Alkylaminium hydroxide.
                                                                                                  for processing additive.
P-16-0398............................        6/6/2016        9/4/2016  CBI.....................  (G) Corrosion inhibitor.  (G) Di-ammonium di-
                                                                                                                            carboxylate.
P-16-0399............................       6/17/2016       9/15/2016  Tryeco Llc..............  (S) Agricultural soil     (S) Starch, polymer with 2-
                                                                                                  amendment for filed       propenoic acid, potassium
                                                                                                  crops seed coating and    salt. oxidized.
                                                                                                  turf.
P-16-0400............................        6/6/2016        9/4/2016  Shell Chemical LP.......  (S) Use in cured          (S) Alkanes, C11	16-branched
                                                                                                  coatings.                 and linear.
P-16-0400............................        6/6/2016        9/4/2016  Shell Chemical LP.......  (S) Agrochemical........  (S) Alkanes, C11	16-branched
                                                                                                                            and linear.
P-16-0400............................        6/6/2016        9/4/2016  Shell Chemical LP.......  (S) Metalworking fluid    (S) Alkanes, C11	16-branched
                                                                                                  use.                      and linear.
P-16-0400............................        6/6/2016        9/4/2016  Shell Chemical LP.......  (S) Use in cleaning       (S) Alkanes, C11	16-branched
                                                                                                  fluids.                   and linear.
P-16-0400............................        6/6/2016        9/4/2016  Shell Chemical LP.......  (S) Chemical............  (S) Alkanes, C11	16-branched
                                                                                                 intermediate............   and linear.
P-16-0402............................        6/7/2016        9/5/2016  CBI.....................  (S) Flotation additive    (G) Propanediamine,
                                                                                                  for use in mineral        [(isoalkyloxy)propyl]
                                                                                                  processing.               derivs., salts.
P-16-0403............................       6/15/2016       9/13/2016  CBI.....................  (G) Open non dispersive   (G) Heteropolycyclic
                                                                                                  use.                      carboxylic acid, polymer
                                                                                                                            with 2-ethyl-2-
                                                                                                                            (hydroxymethyl)-1,3-
                                                                                                                            propanediol and 4-
                                                                                                                            substitutedbenzene,
                                                                                                                            substituted carbomonocycle-
                                                                                                                            and alkyl-substituted
                                                                                                                            carbomonocycle-blocked.

[[Page 49979]]

 
P-16-0404............................        6/8/2016        9/6/2016  CBI.....................  (G) A colorant for        (G) Alkyl ester, 2-({4-[2-
                                                                                                  dyeing various            (trisubstituted phenyl)azo]-
                                                                                                  synthetic fibers and      5-acetamido-2-
                                                                                                  fabrics open, non-        substitutedphenyl{time} (sub
                                                                                                  dispersive use.           stituted alkoxy)amino).
P-16-0406............................        6/9/2016        9/7/2016  CBI.....................  (G) Coating.............  (G) Functionalized polyimide.
P-16-0407............................        6/9/2016        9/7/2016  CBI.....................  (G) Coating.............  (G) Functionalized polyamide.
P-16-0408............................        6/9/2016        9/7/2016  CBI.....................  (G) A Colorant for        (G) 3-pyridinecarbonitrile,
                                                                                                  dyeing various            1,2-dihydro-trisubstituted-5-
                                                                                                  synthetic fibers and      [2-(disubstituted
                                                                                                  fabrics open non-         phenyl)azo]-2-oxo.
                                                                                                  dispersive use.
P-16-0409............................       6/15/2016       9/13/2016  CBI.....................  (G) Chemical              (G) Alkylphenol.
                                                                                                  intermediate for the
                                                                                                  synthesis of another
                                                                                                  substance.
P-16-0410............................       6/14/2016       9/12/2016  CBI.....................  (G) Automotive engine     (G) Silicophosphonate--sodium
                                                                                                  fluid additive.           silicate.
P-16-0411............................       6/13/2016       9/11/2016  CBI.....................  (G) Crosslinking agent..  (G) Substituted polyalkylene
                                                                                                                            polycarbomonocyclic ester,
                                                                                                                            polymer with polyalkylene
                                                                                                                            glycol, alkoxyalkanol
                                                                                                                            blocked.
P-16-0412............................       6/13/2016       9/11/2016  Cardolite Corporation...  (G) Epoxy coating.......  (G) Cashew, nutshell liquid,
                                                                                                                            polymer with amine and
                                                                                                                            formaldehyde.
P-16-0413............................       6/13/2016       9/11/2016  Siltech Llc.............  (S) Anti-fingerprint      (S) Siloxanes and silicones,
                                                                                                  material for a metal      di-me, 3-hydroxypropyl me,
                                                                                                  coating application.      me 3,3,4,4,5,5,6,6,6-
                                                                                                                            nonafluorohexyl.
P-16-0415............................       6/17/2016       9/15/2016  CBI.....................  (G) Coating for oil and   (G) Polyurethane.
                                                                                                  gas industry.
P-16-0417............................       6/16/2016       9/14/2016  CBI.....................  (G) Adhesive for open,    (G) Isocyanate terminated
                                                                                                  non-descriptive use.      polyurethane resin.
P-16-0418............................       6/15/2016       9/13/2016  CBI.....................  (G) A colorant for        (G) 6-(disubstituted-phenyl
                                                                                                  dyeing various            azo)-4,7-disubstituted-
                                                                                                  synthetic fibers and      quinolinepropanoic acid,
                                                                                                  fabrics open, non-        alkyl ester.
                                                                                                  dispersive use.
P-16-0419............................       6/15/2016       9/13/2016  CBI.....................  (G) Use as intermediate.  (G) N-alkyl-
                                                                                                                            dialkylpiperidine.
P-16-0420............................       6/21/2016       9/19/2016  CBI.....................  (S) The notified          (G) Dimethyl cyclohexenyl
                                                                                                  substance will be used    propanol.
                                                                                                  as a fragrance
                                                                                                  ingredient being
                                                                                                  blended (mixed) with
                                                                                                  other fragrance
                                                                                                  ingredients to make
                                                                                                  fragrance oils that
                                                                                                  will be sold to
                                                                                                  industrial and
                                                                                                  commercial customers
                                                                                                  for their incorporation
                                                                                                  into soaps, detergents,
                                                                                                  cleaners and other
                                                                                                  similar household and
                                                                                                  consumer products.
P-16-0421............................       6/16/2016       9/14/2016  Guardian Industries Corp  (S) Additive to           (S) Flue dust, glass
                                                                                                  facilitate melting of     manufacturing
                                                                                                  sand during manufacture   desulfurizationdefinition:
                                                                                                  of glass.                 The dust produced from the
                                                                                                                            flue gas exhaust cleaning of
                                                                                                                            a glass manufacturing
                                                                                                                            process using carbonate
                                                                                                                            containing substances. it
                                                                                                                            consists primarily of
                                                                                                                            na2so4, na2co3, and
                                                                                                                            na4(so4)(co3).
P-16-0422............................       6/21/2016       9/19/2016  CBI.....................  (G) Additive for          (S) 1,2-
                                                                                                  polymers.                 cyclohexanedicarboxylic
                                                                                                                            acid, 1-(phenylmethyl)
                                                                                                                            ester, ester with 2,2,4-
                                                                                                                            trimethyl-1,3-pentanediol
                                                                                                                            mono(2-methylpropanoate).
P-16-0423............................       6/17/2016       9/15/2016  CBI.....................  (G) Intermediate........  (G) Tetraalkylpiperidinium
                                                                                                                            halide.
P-16-0424............................       6/17/2016       9/15/2016  CBI.....................  (G) Directing agent.....  (G) Tetraalkylpiperidinium
                                                                                                                            hydroxide.

[[Page 49980]]

 
P-16-0425............................       6/22/2016       9/20/2016  CBI.....................  (G) A chemical reactant   (G) Amino-silane.
                                                                                                  used in manufacturing a
                                                                                                  polymer.
P-16-0428............................       6/20/2016       9/18/2016  Cardolite Corporation...  (S) Industrial..........  (G) Phenol, formaldehyde and
                                                                                                                            amine.
P-16-0429............................       6/20/2016       9/18/2016  CBI.....................  (G) Universal tint paste  (G) Endcapped polysiloxane.
                                                                                                  resin having high
                                                                                                  solids.
P-16-0430............................       6/21/2016       9/19/2016  CBI.....................  (G) Filler..............  (S) Pentanedioic acid, 2-
                                                                                                                            methyl-.
P-16-0432............................       6/22/2016       9/20/2016  CBI.....................  (S) Additive for          (G) Fatty acid amidoamine
                                                                                                  flotation products used   acetates.
                                                                                                  in ore processing.
P-16-0433............................       6/22/2016       9/20/2016  CBI.....................  (S) Additive for          (G) Fatty acid amidoamine
                                                                                                  flotation products used   acetates.
                                                                                                  in ore processing.
P-16-0434............................       6/22/2016       9/20/2016  CBI.....................  (S) Additive for          (G) Fatty acid amidoamine
                                                                                                  flotation products used   acetates.
                                                                                                  in ore processing.
P-16-0435............................       6/22/2016       9/20/2016  CBI.....................  (S) Additive for          (G) Fatty acid amidoamine
                                                                                                  flotation products used   acetates.
                                                                                                  in ore processing.
P-16-0436............................       6/22/2016       9/20/2016  CBI.....................  (S) Additive for          (G) Fatty acid amidoamine
                                                                                                  flotation products used   acetates.
                                                                                                  in ore processing.
P-16-0437............................       6/22/2016       9/20/2016  CBI.....................  (S) Additive for          (G) Fatty acid amidoamine
                                                                                                  flotation products used   acetates.
                                                                                                  in ore processing.
P-16-0441............................       6/23/2016       9/21/2016  CBI.....................  (G) Oilfield additive...  (G) Formaldehyde, reaction
                                                                                                                            products with amine-
                                                                                                                            alkylamine reaction products
                                                                                                                            ether amine derivs.
                                                                                                                            residues.
P-16-0446............................       6/24/2016       9/22/2016  Allnex USA Inc..........  (S) Resin in              (G) Fatty acids, reaction
                                                                                                  architectural primer      products with alkylamine,
                                                                                                  coatings.                 polymers with substituted
                                                                                                                            carbomonocycle, substituted
                                                                                                                            alkylamines, heteromonocycle
                                                                                                                            and substituted alkanoate,
                                                                                                                            lactates (salts).
P-16-0447............................       6/24/2016       9/22/2016  CBI.....................  (G) Additive for          (G) Alkyl alkenoate, dialkyl
                                                                                                  coatings.                 alkanediyl, polymer with
                                                                                                                            alkyl alkenoate, substituted
                                                                                                                            carbomonocycle, alkyl
                                                                                                                            alkenoate and
                                                                                                                            heteromonocycle alkyl
                                                                                                                            alkenoate, diazene bis alkyl
                                                                                                                            heteromonocycle initiated.
P-16-0448............................       6/27/2016       9/25/2016  CBI.....................  (G) Oil additive........  (G) Metal salts branched
                                                                                                                            alkyl substituted
                                                                                                                            carbomonocycle with
                                                                                                                            substituted alkyl
                                                                                                                            carbomonocycle complexes.
P-16-0449............................       6/27/2016       9/25/2016  CBI.....................  (S) Use per FFDCA         (S) 2,7-decadienal, (2e,7z)-.
                                                                                                  cosmetics.
P-16-0449............................       6/27/2016       9/25/2016  CBI.....................  (S) Use per TSCA          (S) 2,7-decadienal, (2e,7z)-.
                                                                                                  fragrance uses scented
                                                                                                  papers detergents
                                                                                                  candles etc.
P-16-0453............................       6/29/2016       9/27/2016  Miwon North America,      (S) Resin for industrial  (G) Polyester acrylate.
                                                                        Inc..                     coating.
P-16-0454............................       6/30/2016       9/28/2016  CBI.....................  (G) Material for highly   (G) Trisubstituted alkenol.
                                                                                                  dispersive use in
                                                                                                  consumer products.
--------------------------------------------------------------------------------------------------------------------------------------------------------

    For the 1 TME received by EPA during this period, Table 2 provides 
the following information (to the extent that such information is not 
claimed as CBI): The EPA case number assigned to the TME, the date the 
TME was received by EPA, the projected end date for EPA's review of the 
TME, the submitting manufacturer/importer, the potential uses 
identified by the manufacturer/importer in the TME, and the chemical 
identity.

                                                Table 2--TME Received From June 1, 2016 to June 30, 2016
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                          Projected
               Case No.                 Received date    notice  end      Manufacter importer               Use                       Chemical
                                                            date
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-16-0017............................       5/25/2016        7/9/2016  CBI.....................  (G) Wax.................  (G) Modified vegetable oil.
--------------------------------------------------------------------------------------------------------------------------------------------------------


[[Page 49981]]

    For the 23 NOCs received by EPA during this period, Table 3 
provides the following information (to the extent that such information 
is not claimed as CBI): The EPA case number assigned to the NOC; the 
date the NOC was received by EPA; the projected date of commencement 
provided by the submitter in the NOC; and the chemical identity.

                            Table 3--NOCs Received From June 1, 2016 to June 30, 2016
----------------------------------------------------------------------------------------------------------------
                                                           Commencement
                Case No.                   Received date       date                      Chemical
----------------------------------------------------------------------------------------------------------------
J-14-0001...............................        6/7/2016       3/13/2014  (G) Saccharomyces cerevisiae,
                                                                           modified.
P-01-0309...............................       6/17/2016        6/1/2016  (S) Undecanedioic acid, compd. with 2-
                                                                           (2-aminoethoxy)ethanol.
P-12-0121...............................       6/23/2016       5/25/2016  (S) Acetic acid, 1, 1'-anhydride,
                                                                           reaction products with borax and
                                                                           hydrogen peroxide.
P-13-0930...............................       6/13/2016       5/24/2016  (G) Substituted phenol.
P-14-0478...............................       6/23/2016        4/8/2016  (S) Carbonic acid, dimethyl ester,
                                                                           polymer with 1,4-diisocyanatobenzene,
                                                                           1,6-hexanediol and 1,5-pentanediol.
P-14-0860...............................        6/9/2016        5/9/2016  (G) Benzophenonetetracarboxylic
                                                                           dianhydride-methylenediphenylene
                                                                           isocyanate-toluene diisocyanate
                                                                           copolymer.
P-15-0121...............................        6/7/2016        6/2/2016  (S) Formaldehyde, polymer with 2-
                                                                           aminocyclopentanemethanamine, 1,4-
                                                                           butanediamine, 1,2-
                                                                           cyclohexanediamine, 1,6-
                                                                           hexanediamine, hexahydro-1h-azepine
                                                                           and 2-methyl-1,5,-pentanediamine.
P-15-0703...............................       6/15/2016       5/28/2016  (S) 2-propenoic acid, 2-methyl-, 2-
                                                                           (diethylamino)ethyl ester, polymer
                                                                           with butyl 2-propenoate and methyl 2-
                                                                           methyl-2-propenoate, compd. with
                                                                           methyl 4-methylbenzenesulfonate.
P-16-0022...............................        6/3/2016        6/3/2016  (S) C10-C20 neo fatty acids.
P-16-0101...............................        6/9/2016        6/8/2016  (G) Disubstituted benzene alkanal.
P-16-0159...............................        6/9/2016       3/31/2016  (G) Substituted polyaromatic sodium
                                                                           dicarboxylate.
P-16-0173...............................       6/23/2016        6/6/2016  (G) Aminoalkyl alaninate sodium salt
                                                                           (1:1), polymer with alkyldiol,
                                                                           dialkyl-alkanediol, alkyldioic acid,
                                                                           alkyldiol, polyol, cycloaliphatic
                                                                           diisocyanate, polyalkylene glycol
                                                                           mono-alkyl ether-blocked.
P-16-0200...............................       6/14/2016        6/7/2016  (S) 1-propanone, 1-[1,1'-biphenyl]-4-
                                                                           yl-2-methyl-2-(4-morpholinyl)-
P-16-0201...............................        6/6/2016       5/22/2016  (S) Oxirane, 2-methyl-, polymer with
                                                                           alpha-hydro-omega-hydroxy-
                                                                           poly[oxy(methyl-1,2-ethanediyl)], 5-
                                                                           isocyanato-1-(isocyanatomethyl)-1,3,3-
                                                                           trimethyl cyclohexane, oxirane and 2-
                                                                           [[3-
                                                                           (triethoxysilyl)propoxy]methyl]oxiran
                                                                           e, poly ethylenepolypropylene glycol
                                                                           mono-bu ether monoether with
                                                                           propylene oxide-2-[[3-(tri
                                                                           ethoxysilyl)propoxy]methyl] oxirane
                                                                           polymer- and polypropylene glycol
                                                                           mono-bu ether-blocked.
P-16-0203...............................        6/2/2016       5/22/2016  (G) Pentanedioic acid, compd. with
                                                                           polyalkylpolyamine.
P-16-0208...............................        6/6/2016       5/23/2016  (S) Carbon, calcination products with
                                                                           sulfur.
P-16-0222...............................       6/27/2016       6/26/2016  (G) Alkanedioic acid, polymer with
                                                                           substituted heteromonocycle,
                                                                           [acirc]-hydro-
                                                                           [atilde][iquest][acirc]-
                                                                           hydroxypoly(oxy-1,2-ethanediyl) ether
                                                                           with substituted alkanediol and
                                                                           substituted. bis[carbomonocycle],
                                                                           alkanoate.
P-16-0223...............................       6/10/2016        6/2/2016  (G) Wax.
P-16-0227...............................       6/10/2016        6/8/2016  (G) Cashew nutshell liquid, polymer
                                                                           with diisocyanatoalkane, substituted-
                                                                           polyoxyalkyldiol, hydroxy-terminated
                                                                           .polybutadiene and 4,4'-(1-
                                                                           methylethylidene)bis[2-(2-propen-1-
                                                                           yl)phenol].
P-16-0228...............................       6/21/2016        6/6/2016  (G) Derivative of a glycerol, alkanoic
                                                                           acid and mixed fatty acids polymer.
P-16-0235...............................        6/6/2016       5/31/2016  (G) Polymeric methylene
                                                                           diphenyldiisocyanate, polymer with
                                                                           oxyalkyl diol, methacrylate blocked.
P-16-0250...............................       6/24/2016       6/24/2016  (G) Substituted carbomonocycle,
                                                                           polymer with substituted alkanediol,
                                                                           alkanedioic acid, alkanediol,
                                                                           substituted alkanoic acid and
                                                                           substituted carbomonocycle, compd.
                                                                           with substituted alkane.
P-16-0267...............................       6/22/2016       6/19/2016  (G) Fatty acids, reaction products
                                                                           with alkylamine, polymers with
                                                                           substituted carbomonocycle,
                                                                           substituted alkylamines,
                                                                           heteromonocycle and substituted
                                                                           alkanoate, lactates (salts).
----------------------------------------------------------------------------------------------------------------


    Authority:  15 U.S.C. 2601 et seq.

    Dated: July 25, 2016.
Megan Carroll,
Acting Information Management Division, Office of Pollution Prevention 
and Toxics.
[FR Doc. 2016-18015 Filed 7-28-16; 8:45 am]
BILLING CODE 6560-50-P