[Federal Register Volume 81, Number 57 (Thursday, March 24, 2016)]
[Notices]
[Pages 15785-15787]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-06603]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Pipeline and Hazardous Materials Safety Administration

[Docket No. PHMSA-2016-0027 (Notice No. 2016-2)]


Hazardous Materials: Information Collection Activities

AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), 
Department of Transportation (DOT).

ACTION: Notice and request for comments.

-----------------------------------------------------------------------

SUMMARY: In accordance with the Paperwork Reduction Act of 1995, PHMSA 
invites comments on certain information collections pertaining to 
hazardous materials transportation for which PHMSA intends to request 
renewal from the Office of Management and Budget (OMB).

DATES: Interested persons are invited to submit comments on or before 
May 23, 2016.

ADDRESSES: You may submit comments identified by the docket number 
(PHMSA-2016-0027) by any of the following methods:
     Federal eRulemaking Portal: Go to http://www.regulations.gov. Follow the online instructions for submitting 
comments.
     Fax: 1-202-493-2251.
     Mail: Docket Operations, U.S. Department of 
Transportation, West Building, Ground Floor, Room W12-140, Routing 
Symbol M-30, 1200 New

[[Page 15786]]

Jersey Avenue SE., Washington, DC 20590.
     Hand Delivery: To Docket Operations, Room W12-140 on the 
ground floor of the West Building, 1200 New Jersey Avenue SE., 
Washington, DC 20590, between 9 a.m. and 5 p.m., Monday through Friday, 
except Federal holidays.
    Instructions: All submissions must include the agency name and 
docket number or Regulation Identification Number (RIN) for this 
notice. Internet users may access comments received by DOT at: http://www.regulations.gov. Note that comments received will be posted without 
change to: http://www.regulations.gov including any personal 
information provided.
    Requests for a copy of an information collection should be directed 
to Steven Andrews or T. Glenn Foster, Standards and Rulemaking Division 
(PHH-12), Pipeline and Hazardous Materials Safety Administration, 1200 
New Jersey Avenue SE., East Building, 2nd Floor, Washington, DC 20590-
0001, Telephone (202) 366-8553.

FOR FURTHER INFORMATION CONTACT: Steven Andrews or T. Glenn Foster, 
Standards and Rulemaking Division (PHH-12), Pipeline and Hazardous 
Materials Safety Administration, 1200 New Jersey Avenue SE., East 
Building, 2nd Floor, Washington, DC 20590-0001, Telephone (202) 366-
8553.

SUPPLEMENTARY INFORMATION: Section 1320.8 (d), Title 5, Code of Federal 
Regulations requires PHMSA to provide interested members of the public 
and affected agencies an opportunity to comment on information 
collection and recordkeeping requests. This notice identifies 
information collection requests that PHMSA will be submitting to OMB 
for renewal and extension. These information collections are contained 
in 49 CFR 171.6 of the Hazardous Materials Regulations (HMR; 49 CFR 
parts 171 through 180). PHMSA has revised burden estimates, where 
appropriate, to reflect current reporting levels or adjustments based 
on changes in proposed or final rules published since the information 
collections were last approved. The following information is provided 
for each information collection: (1) Title of the information 
collection, including former title if a change is being made; (2) OMB 
control number; (3) summary of the information collection activity; (4) 
description of affected public; (5) estimate of total annual reporting 
and recordkeeping burden; and (6) frequency of collection. PHMSA will 
request a three-year term of approval for each information collection 
activity and, when approved by OMB, publish a notice of the approval in 
the Federal Register.
    PHMSA requests comments on the following information collection:
    Title: Inspection and Testing of Portable Tanks and Intermediate 
Bulk Containers.
    OMB Control Number: 2137-0018.
    Summary: This information collection consolidates provisions for 
documenting qualifications, inspections, tests, and approvals 
pertaining to the manufacture and use of portable tanks and 
intermediate bulk containers under various provisions of the HMR. It is 
necessary to ascertain whether portable tanks and intermediate bulk 
containers have been qualified, inspected, and retested in accordance 
with the HMR. The information is used to verify that certain portable 
tanks and intermediate bulk containers meet required performance 
standards prior to their being authorized for use, and to document 
periodic requalification and testing to ensure the packagings have not 
deteriorated due to age or physical abuse to a degree that would render 
them unsafe for the transportation of hazardous materials.
    Affected Public: Manufacturers and owners of portable tanks and 
intermediate bulk containers.
    Annual Reporting and Recordkeeping Burden:
    Number of Respondents: 8,770.
    Total Annual Responses: 86,100.
    Total Annual Burden Hours: 66,390.
    Frequency of collection: On occasion.
    Title: Hazardous Materials Shipping Papers and Emergency Response 
Information.
    OMB Control Number: 2137-0034
    Summary: This information collection is for the requirement to 
provide a shipping paper and emergency response information with 
shipments of hazardous materials. Shipping papers are considered to be 
a basic communication tool relative to the transportation of hazardous 
materials. The definition of a shipping paper in 49 CFR 171.8 includes 
a shipping order, bill of lading, manifest, or other shipping document 
serving a similar purpose and containing the information required by 
Sec. Sec.  172.202, 172.203, and 172.204 of the HMR. A shipping paper 
with emergency response information must accompany most hazardous 
materials shipments and be readily available at all times during 
transportation. Shipping papers serve as the principal source of 
information regarding the presence of hazardous materials, 
identification, quantity, and emergency response procedures. They also 
serve as the source of information for compliance with other 
requirements, such as the placement of rail cars containing different 
hazardous materials in trains; prevent the loading of poisons with 
foodstuffs; maintain the separation of incompatible hazardous 
materials; and limit the amount of radioactive materials that may be 
transported in a vehicle or aircraft. Shipping papers and emergency 
response information also serve as a means of notifying transport 
workers that hazardous materials are present. Most importantly, 
shipping papers serve as a principal means of identifying hazardous 
materials during transportation emergencies. Firefighters, police, and 
other emergency response personnel are trained to obtain the DOT 
shipping papers and emergency response information when responding to 
hazardous materials transportation emergencies. The availability of 
accurate information concerning hazardous materials being transported 
significantly improves response efforts in these types of emergencies.
    It should be noted that PHMSA recently completed a collection of 
information under the Hazardous Materials Automated Cargo 
Communications for Efficient and Safe Shipments (HM-ACCESS) pilot 
program. This program has concluded and the burden hours posted in this 
notice no longer reflect the collection of information related to the 
HM-ACCESS pilot program.
    Affected Public: Shippers and carriers of hazardous materials in 
commerce.
    Annual Reporting and Recordkeeping Burden:
    Number of Respondents: 260,000.
    Total Annual Responses: 185,000,000.
    Total Annual Burden Hours: 4,625,846.
    Frequency of Collection: On occasion.
    Title: Cargo Tank Motor Vehicles in Liquefied Compressed Gas 
Service.
    OMB Control Number: 2137-0595.
    Summary: These information collection and recordkeeping 
requirements pertain to the manufacture, certification, inspection, 
repair, maintenance, and operation of certain DOT specification and 
non-specification cargo tank motor vehicles used to transport liquefied 
compressed gases. These requirements are intended to ensure cargo tank 
motor vehicles used to transport liquefied compressed gases are 
operated safely, and to minimize the potential for catastrophic 
releases during unloading and loading operations. They include: (1) 
Requirements for operators of cargo tank motor vehicles in liquefied 
compressed gas service to develop operating procedures applicable to 
unloading operations and carry the operating

[[Page 15787]]

procedures on each vehicle; (2) inspection, maintenance, marking, and 
testing requirements for the cargo tank discharge system, including 
delivery hose assemblies; and (3) requirements for emergency discharge 
control equipment on certain cargo tank motor vehicles transporting 
liquefied compressed gases that must be installed and certified by a 
Registered Inspector.
    Affected Public: Carriers in liquefied compressed gas service, 
manufacturers and repairers.
    Annual Reporting and Recordkeeping Burden:
    Number of Respondents: 6,958.
    Total Annual Responses: 920,538.
    Total Annual Burden Hours: 200,914.
    Frequency of collection: On occasion.
    Title: Inspection and Testing of Meter Provers.
    OMB Control Number: 2137-0620.
    Summary: This information collection and recordkeeping burden 
results from the requirements pertaining to the use, inspection, and 
maintenance of mechanical displacement meter provers (meter provers) 
used to check the accurate flow of liquid hazardous materials into bulk 
packagings, such as portable tanks and cargo tank motor vehicles, under 
the HMR. These meter provers are used to ensure that the proper amount 
of liquid hazardous materials is being loaded and unloaded involving 
bulk packagings, such as cargo tanks and portable tanks. These meter 
provers consist of a gauge and several pipes that always contain small 
amounts of the liquid hazardous material in the pipes as residual 
material, and, therefore, must be inspected and maintained in 
accordance with the HMR to ensure they are in proper calibration and 
working order. These meter provers are not subject to the specification 
testing and inspection requirements in part 178. However, these meter 
provers must be visually inspected annually and hydrostatic pressure 
tested every five years in order to ensure they are properly working as 
specified in Sec.  173.5a of the HMR. Therefore, this information 
collection requires that:
    (1) Each meter prover must undergo and pass an external visual 
inspection annually to ensure that the meter provers used in the flow 
of liquid hazardous materials into bulk packagings are accurate and in 
conformance with the performance standards in the HMR.
    (2) Each meter prover must undergo and pass a hydrostatic pressure 
test at least every five years to ensure that the meter provers used in 
the flow of liquid hazardous materials into bulk packagings are 
accurate and in conformance with the performance standards in the HMR.
    (3) Each meter prover must successfully complete the test and 
inspection and must be marked in accordance with Sec. Sec.  180.415(b) 
and 173.5a.
    (4) Each owner must retain a record of the most recent visual 
inspection and pressure test until the meter prover is requalified.
    Affected Public: Owners of meter provers used to measure liquid 
hazardous materials flow into bulk packagings such as cargo tanks and 
portable tanks.
    Annual Reporting and Recordkeeping Burden:
    Number of Respondents: 50.
    Total Annual Responses: 250.
    Total Annual Burden Hours: 175.
    Frequency of collection: On occasion.

    Signed in Washington, DC, on March 18, 2016.
William S. Schoonover,
Deputy Associate Administrator, Pipeline and Hazardous Materials Safety 
Administration.
[FR Doc. 2016-06603 Filed 3-23-16; 8:45 am]
 BILLING CODE 4910-60-P