[Federal Register Volume 81, Number 28 (Thursday, February 11, 2016)]
[Notices]
[Pages 7337-7341]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-02830]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2015-0507; FRL-9942-09]
Certain New Chemicals; Receipt and Status Information for
December 2015
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: EPA is required under the Toxic Substances Control Act (TSCA)
to publish in the Federal Register a notice of receipt of a
premanufacture notice (PMN); an application for a test marketing
exemption (TME), both pending and/or expired; and a periodic status
report on any new chemicals under EPA review and the receipt of
[[Page 7338]]
notices of commencement (NOC) to manufacture those chemicals. This
document covers the period from December 1, 2015 to December 31, 2015.
DATES: Comments identified by the specific case number provided in this
document, must be received on or before March 14, 2016.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2015-0507, and the specific PMN number or TME
number for the chemical related to your comment, by one of the
following methods:
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the online instructions for submitting comments. Do not submit
electronically any information you consider to be Confidential Business
Information (CBI) or other information whose disclosure is restricted
by statute.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001.
Hand Delivery: To make special arrangements for hand
delivery or delivery of boxed information, please follow the
instructions at http://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along
with more information about dockets generally, is available at http://www.epa.gov/dockets.
FOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, IMD 7407M, Office of
Pollution Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number:
(202) 564-8593; email address: [email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; email address: [email protected].
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitters of the actions addressed in this
document.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or email. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When preparing and submitting
your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html.
II. What action is the Agency taking?
This document provides receipt and status reports, which cover the
period from December 1, 2015 to December 31, 2015, and consists of the
PMNs and TMEs both pending and/or expired, and the NOCs to manufacture
a new chemical that the Agency has received under TSCA section 5 during
this time period.
III. What is the Agency's authority for taking this action?
Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical
substance as either an ``existing'' chemical or a ``new'' chemical. Any
chemical substance that is not on EPA's TSCA Inventory is classified as
a ``new chemical,'' while those that are on the TSCA Inventory are
classified as an ``existing chemical.'' For more information about the
TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm.
Anyone who plans to manufacture or import a new chemical substance
for a non-exempt commercial purpose is required by TSCA section 5 to
provide EPA with a PMN, before initiating the activity. Section 5(h)(1)
of TSCA authorizes EPA to allow persons, upon application, to
manufacture (includes import) or process a new chemical substance, or a
chemical substance subject to a significant new use rule (SNUR) issued
under TSCA section 5(a), for ``test marketing'' purposes, which is
referred to as a test marketing exemption, or TME. For more information
about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish
in the Federal Register a notice of receipt of a PMN or an application
for a TME and to publish in the Federal Register periodic reports on
the status of new chemicals under review and the receipt of NOCs to
manufacture those chemicals.
IV. Receipt and Status Reports
As used in each of the tables in this unit, (S) indicates that the
information in the table is the specific information provided by the
submitter, and (G) indicates that the information in the table is
generic information because the specific information provided by the
submitter was claimed as CBI.
For the 46 PMNs received by EPA during this period, Table 1
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the PMN; the
date the PMN was received by EPA; the projected end date for EPA's
review of the PMN; the submitting manufacturer/importer; the potential
uses identified by the manufacturer/importer in the PMN; and the
chemical identity.
Table 1--PMNs Received From December 1, 2015 to December 31, 2015
----------------------------------------------------------------------------------------------------------------
Projected
Date end date
Case No. received for EPA Manufacturer/importer Use(s) Chemical identity
review
----------------------------------------------------------------------------------------------------------------
P-16-0015.......... 12/15/2015 3/14/2016 CBI....................... (S) New substance (G) Dimethicone
is a polymer used crosspolymer and
as a hydropholbic Silica.
coating for metal
oxide particular
in industrial
formulations used
a functional
surface treatment
on metal oxide
which is used in
cosmetic and
sunscreen
formulations.
[[Page 7339]]
P-16-0054.......... 12/10/2015 3/9/2016 Blaser Swisslube, Inc..... (S) Metal working (S) Phosphoric
fluid component. acid, mixed 2-
hexlydecyl and 2-
hexyldodecyl and
2-octyldecyl and
2-octyldodecyl
mono- and
diesters.
P-16-0108.......... 12/2/2015 3/1/2016 CBI....................... (G) Use in uv/eb (G) Dimethyl
adhesives and ester, polymer
coatings. with 1,6-
hexanediol, 5-
iscocyanato-1-
(isocyanatomethy
l)-1,3,3-
trimethylcyclohe
xane and 2-
oxepanone, 2-
hydroxyethyl
acrylate-
blocked.
P-16-0109.......... 12/2/2015 3/1/2016 CBI....................... (G) Raw material (G)
of polyurethane. Heteropolycycle
hydrogen
carbonate,
polycondensate
with alkyl
hydrogen
carbonate.
P-16-0110.......... 12/2/2015 3/1/2016 CBI....................... (G) Raw material (G)
of polyurethane. Heteropolycycle
hydrogen
carbonate,
polycondensate
with alkyl
hydrogen
carbonate.
P-16-0111.......... 12/3/2015 3/2/2016 Allnex USA, Inc........... (S) Electro- (G) Fatty acids,
deposition primer. reaction
products with
alkylamine,
polymers with
substituted
carbomonocycle,
substituted
alkylamines,
heteromonocycle
and substituted
alkanoate,
acetates
(salts).
P-16-0112.......... 12/3/2015 3/2/2016 Allnex USA, Inc........... (S) Isolated (G) Substituted
intermediate for heteromonocycle,
electro polymer with
deposition primer. substituted
carbomonocycle
and alkyl
(hydroxyalkyl)al
kanediol,
alkoxyalkanol-
blocked.
P-16-0115.......... 12/4/2015 3/3/2016 CBI....................... (S) Component of (G) 2-
flexible foam. Propanediol,
polymer with 2-
ethyloxirane,
oxirane and
cycloaliphatic
anhydride,
polymer with
2,2'-[(1-
methylethylidene
)bis(4,1-
phenyleneoxymeth
ylene)]bis[oxira
ne].
P-16-0117.......... 12/5/2015 3/4/2016 CBI....................... (S) Bleach for (S) Magnesium
whitening, hydroxide
deodorizing and/ hypochlorite
or cleaning. oxide.
P-16-0118.......... 12/8/2015 3/7/2016 CBI....................... (G) Additives for (G) Akyl
lubricating oil. methacrylates
copolymer.
P-16-0119.......... 12/14/2015 3/13/2016 CBI....................... (G) Intermediate.. (G)
Chlorofluorocarb
on.
P-16-0120.......... 12/8/2015 3/7/2016 The Shepherd Color Company (G) Pigment for (S) Aluminum
anti-corrosive vanadium zinc
paints. hydroxide oxide.
P-16-0121.......... 12/8/2015 3/7/2016 CBI....................... (S) Water reducing (G) Acrylic acid
agent for use in polymer with
concrete. polyethylene
glycol.
P-16-0122.......... 12/8/2015 3/7/2016 CBI....................... (G) Intermediate.. (G)
Chlorofluorocarb
on.
P-16-0123.......... 12/8/2015 3/7/2016 Infineum USA, L.P......... (G) Oil additive.. (G) Formaldehyde
polymers with
substituted-
carbomonocycle,
(tetraalkenyl)
derivs.
P-16-0124.......... 12/9/2015 3/8/2016 CBI....................... (G) Resin for (G) Substituted
coatings. alkanoic acid-,
salts with
substituted
alkanol-blocked
haloalkyl
heteromonocycle
substituted
carbomonocycle
polymer alkyl
alkanoate-
substituted
carbomonocycle-
trialkylcarbomon
ocycle-alkyl
imine reaction
products.
P-16-0125.......... 12/9/2015 3/8/2016 CBI....................... (G) Resin for (G) Alkoxy alkyl
coatings. substituted
alkanoic acid,
ion(1-), salts
with substituted
carbomonocycle
substituted
heteromonocyclic
polymer ester
with substituted
carbomonocycle
alkyl ester-
alkyl
substituted
alkanol reaction
products.
P-16-0126.......... 12/9/2015 3/8/2016 CBI....................... (G) Resin for (G) Substituted
coatings. carbomonocycle,
polymer with
substituted
heteromonocycle,
reaction
products with
substituted
amine,
substituted
amine and
substituted
alkanol,
alkylalkanoates
substituted
carbomonocycle.
P-16-0127.......... 12/10/2015 3/9/2016 CBI....................... (S) Flotation of (G) dialkyl ether
silica from iron ammonium salts.
ore and selected
nonferrous
minerals.
P-16-0128.......... 12/10/2015 3/9/2016 Cardolite Corporation..... (S) Epoxy curing (G) Fatty acids,
agent for light c18-
colored coatings. unsatd.,dimers,p
olymers with
cashew nutshell
liq., glycidyl
ethers and
polyethylenepoly
amines.
P-16-0129.......... 12/10/2015 3/9/2016 Zeon Chemicals, L.P....... (S) Resin for hot (G) Hydrocarbon
melt adhesives. Resin,
Hydrogenated.
P-16-0131.......... 12/14/2015 3/13/2016 CBI....................... (G) Dye........... (G)
Polyethoxylated
monoazo.
P-16-0132.......... 12/14/2015 3/13/2016 CBI....................... (S) Emulsifier and (G) Alkyoxylated
lubricant for use fatty alcohol
in metal working phosphate ester.
fluids.
P-16-0133.......... 12/14/2015 3/13/2016 CBI....................... (S) Raw material (S) 1,4-
used to impart Benzenedicarboxy
high heat lic acid,
resistance to polymer with 2-
heat resistant methyl-1,8-
plastics used in octanediamine
the manufacture and 1,9-
of LED reflectors nonanediamine,
used in reaction
reflective plates. products with
benzoic acid.
P-16-0134.......... 12/15/2015 3/14/2016 CBI....................... (G) Cured coatings (G) Acrylic
and inks. oligomer.
P-16-0135.......... 12/16/2015 3/15/2016 CBI....................... (G) Pigment (G) Polyesters,
wetting and fatty alkyl
dispersing amides
additive. terminated.
P-16-0136.......... 12/15/2015 3/14/2016 CBI....................... (G) Oil production (G) Dialkylamino
alkylamide inner
salt.
P-16-0139.......... 12/15/2015 3/14/2016 CBI....................... (G) Oil production (G) Dialkylamino
alkylamide inner
salt, salts.
P-16-0140.......... 12/15/2015 3/14/2016 CBI....................... (G) Oil production (G) Dialkylamino
alkylamide inner
salt, salts.
P-16-0141.......... 12/22/2015 3/21/2016 CBI....................... (G) Lubricant (G) Polyalkyl
additive. methacrylate
copolymer.
P-16-0142.......... 12/16/2015 3/15/2016 CBI....................... (G) Polymer for (G) Amine salted
coatings. polyacrylate.
P-16-0143.......... 12/16/2015 3/15/2016 CBI....................... (G) Chemical (G)
intermediate. Haloalkylfuranca
rboxaldehyde.
[[Page 7340]]
P-16-0144.......... 12/16/2015 3/15/2016 H. B. Fuller Company...... (G) Industrial (G) Urethane
adhesive. acrylate.
P-16-0145.......... 12/16/2015 3/15/2016 H. B. Fuller Company...... (G) Urethane (G) Urethane
acrylate. acrylate.
P-16-0146.......... 12/16/2015 3/15/2016 H. B. Fuller Company...... (G) Industrial (G) Urethane
adhesive. acrylate.
P-16-0147.......... 12/16/2015 3/15/2016 H. B. Fuller Company...... (G) Industrial (G) Urethane
adhesive. acrylate.
P-16-0148.......... 12/16/2015 3/15/2016 CBI....................... (G) Oil production (G) Dialkylamino
alkylamide inner
salt.
P-16-0149.......... 12/17/2015 3/16/2016 Cadence Chemical (S) Paints for (G) 2-alkenoic
Corporation. wood, metal and acid, alkyl
plastic. ester, polymer
with ethenyl
benzene, alkyl 2-
alky alkenoate
and alkene
carboxylic acid.
P-16-0150.......... 12/18/2015 3/17/2016 CBI....................... (G) Intermediate.. (G)
Chlorofluorocarb
on.
P-16-0151.......... 12/18/2015 3/17/2016 CBI....................... (G) Intermediate.. (G)
Perfluoropolyeth
er halide.
P-16-0152.......... 12/18/2015 3/17/2016 CBI....................... (G) Intermediate.. (G)
Perfluoropolyeth
er aryl.
P-16-0153.......... 12/18/2015 3/17/2016 CBI....................... (G) Lubricant (G) Substituted
additive. aryl
perfluoropolyeth
er.
P-16-0154.......... 12/18/2015 3/17/2016 CBI....................... (G) Lubricant (G) Sulfonated
additive. perfluoropolyeth
er aromatic
transition metal
salt.
P-16-0155.......... 12/18/2015 3/17/2016 CBI....................... (G) Lubricant (G) Sulfonated
additive. perfluoropolyeth
er aryl alkali
metal salt.
P-16-0156.......... 12/18/2015 3/17/2016 CBI....................... (G) Lubricant (G) Sulfonated
additive. perfluoropolyeth
er aryl alkali
metal salt.
P-16-0160.......... 12/30/2015 3/29/2016 CBI....................... (G) Curing agent (G)
and curing agent Polyethylenepoly
precursor, amines.
adhesion promoter
and adhesion
promoter
precursor.
----------------------------------------------------------------------------------------------------------------
For the 4 TMEs received by EPA during this period, Table 2 provides
the following information (to the extent that such information is not
claimed as CBI): The EPA case number assigned to the TME, the date the
TME was received by EPA, the projected end date for EPA's review of the
TME, the submitting manufacturer/importer, the potential uses
identified by the manufacturer/importer in the TME, and the chemical
identity.
Table 2--TMEs Received From December 1, 2015 to December 31, 2015
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected end
Case No. Date received date for EPA Manufacturer/Importer Use(s) Chemical identity
review
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-16-0013.................... 12/15/2015 1/29/2016 CBI (G) Oil production................ (G) Dialkylamino
alkylamide inner salt.
T-16-0014.................... 12/15/2015 1/29/2016 CBI (G) Oil production................ (G) Dialkylamino
alkylamide inner salt,
salts.
T-16-0015.................... 12/15/2015 1/29/2016 CBI (G) Oil production................ (G) Dialkylamino
alkylamide inner salt,
salts.
T-16-0016.................... 12/16/2015 1/30/2016 CBI (G) Oil production................ (G) Dialkylamino
alkylamide inner salt.
--------------------------------------------------------------------------------------------------------------------------------------------------------
For the 38 NOCs received by EPA during this period, Table 3
provides the following information (to the extent that such information
is not claimed as CBI): The EPA case number assigned to the NOC; the
date the NOC was received by EPA; the projected date of commencement
provided by the submitter in the NOC; and the chemical identity.
Table 3--NOCs Received From December 1, 2015 to December 31, 2015
------------------------------------------------------------------------
Projected date
Case No. Date received of Chemical
commencement identity
------------------------------------------------------------------------
J-15-0034............. 12/21/2015 12/18/2015 (G)
Saccharomyces
cerevisiae
modified.
P-11-0543............. 12/1/2015 11/3/2015 (G)
Polyfluorinated
alkyl
quanternary
ammonium
chloride.
P-12-0118............. 12/16/2015 12/2/2015 (G) Substituted
pyridinium
salt.
P-12-0549............. 12/10/2015 11/11/2015 (G) Modified
polyester.
P-13-0558............. 12/3/2015 11/28/2015 (G) Alkylene
imine
homopolymer,
alkyl
derivatives.
P-13-0853............. 12/15/2015 10/28/2015 (G) Inorganic
acid, triphenyl
ester, polymer
with mixed
diols and
alcohols.
P-14-0492............. 12/1/2015 10/18/2015 (S) Ethanol,
2,2',2''-
nitrilotris-,
compd. with
alpha, alpha'--
[[[4-[2-(4-
sulfo-1-
naphthalenyl)
diazenyl]
phenyl] imino]
di-2,1-
ethanediyl]bis[
omega-
hydroxypoly(oxy-
1,2-
ethanediyl)]
(1:1).
P-14-0643............. 12/16/2015 11/16/2015 (G) Titanium
oxide
derivative.
P-14-0838............. 12/10/2015 12/7/2015 (G) Modified
copolymer of
buta-1,3-diene
and styrene.
P-15-0065............. 12/9/2015 12/5/2015 (G) Mixture of
aminopropyl-
terminated N-
methylated
polyalkylenepol
yamines.
P-15-0177............. 12/16/2015 12/4/2015 (G) Phenol, 2,2'-
[1,2-
disubstituted-
1,2-
ethanediyl]bis(
iminomethylene)
bis[substituted
.
P-15-0326............. 12/21/2015 10/19/2015 (G)
Polyfluorohydro
carbon.
P-15-0341............. 12/22/2015 12/15/2015 (G) Propenoic
acid alkyl
ester(s),
telomer with
alkanethiol, 2-
methyl-2-
propenoic acid
and 2-
hydroxyethyl 2-
propenoate.
P-15-0349............. 12/3/2015 11/23/2015 (G) Carbonic
acid, diethyl
ester, polymer
with 1,6-
hexanediol, 5-
isocyanato-1-
(isocyanatometh
yl)-1,3,3-
trimethylcycloh
exane 2-
hydroxyethyl
acrylate-
blocked.
P-15-0355............. 12/8/2015 11/21/2015 (S) Hexane, 1,6-
diisocyanato-,
homopolymer, di-
et malonate-
blocked.
[[Page 7341]]
P-15-0455............. 12/15/2015 12/4/2015 (S) 1,4-
Cyclohexanedica
rboxylic acid,
1,4-dimethyl
ester, polymer
with 1,4-
cyclohexanedime
thanol.
P-15-0468............. 12/16/2015 12/15/2015 (G)
Polycyclecarbox
ylic acid,
hydroxy-
(substituted
phenyl)diazenyl
, metal salt.
P-15-0544............. 12/1/2015 11/25/2015 (G) Trialkyl
cycloalkylammon
ium hydroxide.
P-15-0581............. 12/10/2015 11/23/2015 (G) L-amino
acid,
homopolymer,
carboxylate.
P-15-0587............. 12/14/2015 12/2/2015 (G) vegetable
oil polymer
with 1,1'-
methylenebis[is
ocyantobenzene]
, oxepanone and
trimethylolprop
ane.
P-15-0596............. 12/3/2015 11/16/2015 (G) Methyl
alkaryl methyl
hydrogen
cyclosiloxanes.
P-15-0602............. 12/9/2015 11/12/2015 (G) Copolymer of
tetrafluoroethe
ne and
perfluorosulfon
ylvinylether.
P-15-0606............. 12/2/2015 11/24/2015 (S) Alkenes, C18-
22, mixed with
polyethylene,
oxidized,
hydrolyzed,
distn.
residues, from
C20-22 alcs.
manufacturer.
P-15-0608............. 12/2/2015 11/26/2015 (G) Modified
rosin polyol
ester.
P-15-0612............. 12/23/2015 12/22/2015 (S) Sulfur
thulium
ytterbium
yttrium oxide.
P-15-0613............. 12/23/2015 12/22/2015 (S) Gadolinium
sulfur
ytterbium
yttrium oxide,
erbium- and
thulium-doped.
P-15-0614............. 12/23/2015 12/22/2015 (S) Neodymium
sulfur yttrium
oxide.
P-15-0615............. 12/23/2015 12/22/2015 (S) Erbium
gadolinium
neodymium
sulfur
ytterbium
yttrium oxide.
P-15-0616............. 12/23/2015 12/22/2015 (S) Erbium
gadolinium
sulfur
ytterbium
yttrium oxide.
P-15-0618............. 12/23/2015 12/22/2015 (S) Erbium
gadolinium
sulfur
ytterbium
oxide.
P-15-0624............. 12/2/2015 11/22/2015 (G) Modified
urethane
polymer.
P-15-0635............. 12/29/2015 12/13/2015 (G) Polymer of
an aromatic
olefin and one
or more
substituted
aromatic
olefins.
P-15-0648............. 12/11/2015 12/10/2015 (G) Alkylamino
alcohol.
P-15-0657............. 12/9/2015 11/22/2015 (G) Allyl
triazine
oligomer.
P-15-0684............. 12/7/2015 12/3/2015 (G) Substituted
alkenoic acid,
alkyl ester,
telomer with
alkanethiol and
oxiranylalkyl
alkyl-
alkenoatenoate.
P-15-0687............. 12/10/2015 12/8/2015 (G) Polyester
adduct.
P-15-0696............. 12/14/2015 12/7/2015 (G) Urethane
acrylate.
P-15-0712............. 12/14/2015 12/11/2015 (S)
Cyclopropanemet
hanol, 2-(1,4-
dimethyl-3-
penten-1-yl)-1-
methyl-.
------------------------------------------------------------------------
Authority: 15 U.S.C. 2601 et seq.
Dated: February 5, 2016.
Pamela Myrick,
Acting, Information Management Division, Office of Pollution Prevention
and Toxics.
[FR Doc. 2016-02830 Filed 2-10-16; 8:45 am]
BILLING CODE 6560-50-P