[Federal Register Volume 80, Number 97 (Wednesday, May 20, 2015)]
[Rules and Regulations]
[Pages 28839-28843]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-11959]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

40 CFR Part 180

[EPA-HQ-OPP-2013-0821; FRL-9927-38]


Fragrance Components; Exemption From the Requirement of a 
Tolerance

AGENCY: Environmental Protection Agency (EPA).

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: This regulation establishes an exemption from the requirement 
of a tolerance for residues of various fragrance component substances 
when used as inert ingredients in antimicrobial pesticide formulations 
for use on food contact surfaces in public eating places, dairy-
processing equipment, and food-processing equipment and utensils. This 
regulation eliminates the need to establish a maximum permissible level 
for residues of these various fragrance component substances

DATES: This regulation is effective May 20, 2015. Objections and 
requests for hearings must be received on or before July 20, 2015, and 
must be filed in accordance with the instructions provided in 40 CFR 
part 178 (see also Unit I.C. of the SUPPLEMENTARY INFORMATION).

ADDRESSES: The docket for this action, identified by docket 
identification (ID) number EPA-HQ-OPP-2013-0821, is available at http://www.regulations.gov or at the Office of Pesticide Programs Regulatory 
Public Docket (OPP Docket) in the Environmental Protection Agency 
Docket Center (EPA/DC), West William Jefferson Clinton Bldg., Rm. 3334, 
1301 Constitution Ave. NW., Washington, DC 20460-0001. The Public 
Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through 
Friday, excluding legal holidays. The telephone number for the Public 
Reading Room is (202) 566-1744, and the telephone number for the OPP 
Docket is (703) 305-5805. Please review the visitor instructions and 
additional information about the docket available at http://www.epa.gov/dockets.

FOR FURTHER INFORMATION CONTACT: Susan Lewis, Registration Division 
(7505P), Office of Pesticide Programs, Environmental Protection Agency, 
1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; main telephone 
number: (703) 305-7090; email address: [email protected].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this action apply to me?

    You may be potentially affected by this action if you are an 
agricultural producer, food manufacturer, or pesticide manufacturer. 
The following list of North American Industrial Classification System 
(NAICS) codes is not intended to be exhaustive, but rather provides a 
guide to help readers determine whether this document applies to them. 
Potentially affected entities may include:
     Crop production (NAICS code 111).
     Animal production (NAICS code 112).
     Food manufacturing (NAICS code 311).
     Pesticide manufacturing (NAICS code 32532).

B. How can I get electronic access to other related information?

    You may access a frequently updated electronic version of 40 CFR 
part 180 through the Government Publishing Office's e-CFR site at 
http://www.ecfr.gov/cgi-bin/text-idx?&c=ecfr&tpl=/ecfrbrowse/Title40/40tab_02.tpl.

C. How can I file an objection or hearing request?

    Under the Federal Food, Drug, and Cosmetic Act (FFDCA) section 
408(g), 21 U.S.C. 346a, any person may file an objection to any aspect 
of this regulation and may also request a hearing on those objections. 
You must file your objection or request a hearing on this regulation in 
accordance with the instructions provided in 40 CFR part 178. To ensure 
proper receipt by EPA, you must identify docket ID number EPA-HQ-OPP-
2013-0821 in the subject line on the first page of your submission. All 
objections and requests for a hearing must be in writing, and must be

[[Page 28840]]

received by the Hearing Clerk on or before July 20, 2015. Addresses for 
mail and hand delivery of objections and hearing requests are provided 
in 40 CFR 178.25(b).
    In addition to filing an objection or hearing request with the 
Hearing Clerk as described in 40 CFR part 178, please submit a copy of 
the filing (excluding any Confidential Business Information (CBI)) for 
inclusion in the public docket. Information not marked confidential 
pursuant to 40 CFR part 2 may be disclosed publicly by EPA without 
prior notice. Submit the non-CBI copy of your objection or hearing 
request, identified by docket ID number EPA-HQ-OPP-2013-0821, by one of 
the following methods:
     Federal eRulemaking Portal: http://www.regulations.gov. 
Follow the online instructions for submitting comments. Do not submit 
electronically any information you consider to be CBI or other 
information whose disclosure is restricted by statute.
     Mail: OPP Docket, Environmental Protection Agency Docket 
Center (EPA/DC), (28221T), 1200 Pennsylvania Ave. NW., Washington, DC 
20460-0001.
     Hand Delivery: To make special arrangements for hand 
delivery or delivery of boxed information, please follow the 
instructions at http://www.epa.gov/dockets/contacts.html.
    Additional instructions on commenting or visiting the docket, along 
with more information about dockets generally, is available at http://www.epa.gov/dockets.

II. Today's Action

A. What is the authority for this action?

    EPA is taking this action under section 408(e) the FFDCA, 21 U.S.C. 
346a(e), which allows EPA to establish a tolerance exemption under 
FFDCA section 408, 21 U.S.C. 346a et se. Section 408(c)(2)(A)(i) of 
FFDCA allows EPA to establish an exemption from the requirement for a 
tolerance (the legal limit for a pesticide chemical residue in or on a 
food) only if EPA determines that the exemption is ``safe.'' Section 
408(c)(2)(A)(ii) of FFDCA defines ``safe'' to mean that ``there is a 
reasonable certainty that no harm will result from aggregate exposure 
to the pesticide chemical residue, including all anticipated dietary 
exposures and all other exposures for which there is reliable 
information.'' This includes exposure through drinking water and in 
residential settings, but does not include occupational exposure. 
Pursuant to FFDCA section 408(c)(2)(B), in establishing or maintaining 
in effect an exemption from the requirement of a tolerance, EPA must 
take into account the factors set forth in FFDCA section 408(b)(2)(C), 
which requires EPA to give special consideration to exposure of infants 
and children to the pesticide chemical residue in establishing a 
tolerance and to ``ensure that there is a reasonable certainty that no 
harm will result to infants and children from aggregate exposure to the 
pesticide chemical residue. . . . ''
    EPA performs a number of analyses to determine the risks from 
aggregate exposure to pesticide residues. For further discussion of the 
regulatory requirements of FFDCA section 408 and a complete description 
of the risk assessment process, see http://www.epa.gov/pesticides/regulating/tolerances.htm.

B. What action is the Agency taking?

    EPA, on its own initiative under FFDCA section 408(e), is 
establishing exemptions from the requirement of a tolerance for 
residues of various fragrance component substances identified at the 
end of this document.

III. EPA's Proposal

    In the Federal Register of July 25, 2014 (79 FR 43350) (FRL-9910-
53), EPA proposed, on its own initiative under FFDCA section 408(e), 21 
U.S.C. 346a(e), to establish exemptions from the requirement of a 
tolerance for residues of acetaldehyde (CAS Reg. No. 75-07-0), acetic 
acid (CAS Reg. No. 64-19-7), allyl cyclohexyl propionate (CAS Reg. No. 
2705-87-5), butryic acid (CAS Reg. No. 107-92-6), butyl alcohol (CAS 
Reg. No. 71-36-3), citral (CAS Reg. No. 5392-40-5), citronellol (CAS 
Reg. No. 106-22-9), citronellyl acetate (CAS Reg. No. 150-84-5), 
[beta]-damascone, (Z)-(CAS Reg. No. 23726-92-3), decanal (CAS Reg. No. 
112-31-2), (E)-4-decenal (CAS Reg. No. 65405-70-1), decanoic acid (CAS 
Reg. No. 334-48-5), 1-decanol (CAS Reg. No. 112-30-1), 2,6-dimethyl-5-
heptanal (CAS Reg. No. 106-72-9), 2-dodecanol, (2E)- (CAS Reg. No. 
20407-84-5), d-limonene (CAS Reg. No. 5989-27-5), ethyl 2-
methylbutyrate (CAS Reg. No. 452-79-1), (E)-geraniol (CAS Reg. No. 106-
24-1), (E)-geraniol acetate (CAS Reg. No. 105-87-3), heptanal (CAS Reg. 
No. 111-71-7), heptanoic acid (CAS Reg. No. 111-14-8), heptyl alcohol 
(CAS Reg. No. 111-70-6), hexanal (CAS Reg. No. 66-25-1), hexanoic acid 
(CAS Reg. No. 142-62-1), (Z)-3-hexenol (CAS Reg. No. 928-96-1), (Z)-3-
hexenol acetate (CAS Reg. No. 3681-71-8), hexyl acetate (CAS Reg. No. 
142-92-7), hexyl alcohol (CAS Reg. No. 111-27-3), lauric acid (CAS Reg. 
No.143-07-7), lauric aldehyde (CAS Reg. No. 112-54-9), lauryl alcohol 
(CAS Reg. No. 112-53-8), methyl-[alpha]-ionone (CAS Reg. No. 127-42-4), 
3-methyl-2-butenyl acetate (CAS Reg. No. 1191-16-8), 2-methylundecanal 
(CAS Reg. No. 110-41-8), myristaldehyde (CAS Reg. No. 124-25-4), 
myristic acid (CAS Reg. No. 544-63-8), neryl acetate (CAS Reg. No. 141-
12-8), n-hexanol (CAS Reg. No. 111-27-3), nonanal (CAS Reg. No. 124-19-
6), nonanoic acid (CAS Reg. No. 112-05-0), nonyl alcohol (CAS Reg. No. 
143-08-8), octanal (CAS Reg. No. 124-13-0), octanoic acid (CAS Reg. No. 
124-07-2), 1-octanol (CAS Reg. No. 111-87-5), palmitic acid (CAS Reg. 
No. 57-10-3), propionic acid (CAS Reg. No. 79-09-4), stearic acid (CAS 
Reg. No. 57-11-4), 2-tridecanal (CAS Reg. No. 7774-82-5), 3,5,5-
trimethylhexanal (CAS Reg. No. 5435-64-3), undecanal (CAS Reg. No. 112-
44-7), undecyl alcohol (CAS Reg. No. 112-42-5), valeraldehyde (CAS Reg. 
No. 110-62-3), and valeric acid (CAS Reg. No. 109-52-4) when used as 
fragrance components (i.e., inert ingredients) in antimicrobial 
pesticide formulations for use on food-contact surfaces in public 
eating places, dairy-processing equipment, and food-processing 
equipment and utensils at end-use concentrations not to exceed 100 
parts per million (ppm).
    As discussed in that document, EPA has reviewed the available 
scientific data and other relevant information in support of this 
action, consistent with FFDCA section 408(c)(2), and the factors 
specified in FFDCA section 408(b)(2)(C and D). EPA has sufficient data 
to assess the hazards of and to make a determination on aggregate 
exposure for these various fragrance components including exposure 
resulting from the exemptions from the requirement of a tolerance 
established by this action. For a detailed discussion of the aggregate 
risk assessments and determination of safety that support the 
establishment of these exemptions from the requirement of a tolerance, 
please refer to the July 25, 2014 Federal Register final rule and its 
supporting documents, available at http://regulations.gov.

IV. Public Comments

    EPA received nine comments to the proposed rule. Six of the 
comments were fully supportive of the proposed rule. One comment made 
specific reference to the fragrance component acetaldehyde and stated 
that the risk assessment of acetaldehyde should reconsider the 
compound's cancer risk. The comment noted that part of the safety 
finding for the fragrance components was based on no structural alerts 
for genotoxicity or carcinogenicity but in the case of acetaldehyde EPA 
had previously considered acetaldehyde to

[[Page 28841]]

be a probable human carcinogen based on inadequate human cancer studies 
and animal studies that have shown increased incidence of nasal tumors 
in rats and laryngeal tumors in hamsters after inhalation exposure. The 
Agency agrees with the commenter that the safety analysis provided in 
the proposed rule, which relies on human exposure threshold values for 
non-cancer risks, is not applicable to acetaldehyde and therefore, 
cannot be used to support an exemption for acetaldehyde. As such, EPA 
is not establishing in this final rule an exemption from the 
requirement of a tolerance for acetaldehyde as a fragrance component 
for use in antimicrobial pesticide formulations for use on food-contact 
surfaces in public eating places, dairy-processing equipment, and food-
processing equipment and utensils at end-use concentrations not to 
exceed 100 ppm.
    Two comments made reference to fragrance sensitivity among certain 
individuals. The Agency understands the commenter's concerns, however 
the legal framework provided by FFDCA section 408 states that 
tolerances may be set when the pesticide chemical meets the safety 
standard imposed by that statute. The Agency is required by FFDCA 
section 408 to estimate the risk of the potential exposure to these 
residues. Neither the supporting information cited by the commenters or 
other reliable data demonstrate the occurrence of specific adverse 
effects directly attributable to exposures to the substances listed in 
Unit III and EPA has concluded that there is a reasonable certainty 
that no harm will result to the general population and to infants and 
children from aggregate exposure to the fragrance components listed in 
Unit III when used as inert ingredients in antimicrobial formulations 
for use on food contact surfaces in public eating places, dairy 
processing equipment, and food processing equipment and utensils at 
end-use concentrations not to exceed 100 ppm.

V. Final Rule and Determination of Safety

    Except for the exclusion of acetaldehyde, EPA is not making any 
changes to the risk assessment or final rule text that was proposed in 
July 25, 2014 Federal Register. Therefore, EPA concludes that there is 
a reasonable certainty that no harm will result to the general 
population and to infants and children from aggregate exposure to 
acetic acid; allyl cylcohexylpropionate; butryic acid; butyl alcohol; 
citral; citronellol; citronellyl acetate; [beta]-damascone, (Z)-; 
decanal; (E)-4-decenal; decanoic acid; 1-decanol; 2,6-dimethyl-5-
heptanal; 2-dodecanol, (2E)-; d-limonene; ethyl 2-methylbutyrate; (E)-
geraniol; (E)-geraniol acetate; heptanal; heptanoic acid; heptyl 
alcohol; hexanal; hexanoic acid; (Z)-3-hexenol; (Z)-3-hexenol acetate; 
hexyl acetate; hexyl alcohol; lauric acid; lauric aldehyde; lauryl 
alcohol; methyl-[alpha]-ionone; 3-methyl-2-butenyl acetate; 2-
methylundecanal; myristaldehyde; myristic acid; neryl acetate; n-
hexanol; nonanal; nonanoic acid; nonyl alcohol; octanal; octanoic acid; 
1-octanol; palmitic acid; propionic acid; stearic acid; 2-tridecanal; 
3,5,5-trimethylhexanal; undecanal; undecyl alcohol; valeraldehyde; and 
valeric acid residues when used as when used as fragrance components 
(i.e., inert ingredients) in antimicrobial pesticide formulations for 
use on food-contact surfaces in public eating places, dairy-processing 
equipment, and food-processing equipment and utensils at end-use 
concentrations not to exceed 100 ppm.

VI. Other Considerations

A. Analytical Enforcement Methodology

    An analytical method is not required for enforcement purposes since 
the Agency is establishing an exemption from the requirement of a 
tolerance without any numerical limitation.

B. International Residue Limits

    In making its tolerance decisions, EPA seeks to harmonize U.S. 
tolerances with international standards whenever possible, consistent 
with U.S. food safety standards and agricultural practices. EPA 
considers the international maximum residue limits (MRLs) established 
by the Codex Alimentarius Commission (Codex), as required by FFDCA 
section 408(b)(4). The Codex Alimentarius is a joint United Nations 
Food and Agriculture Organization/World Health Organization food 
standards program, and it is recognized as an international food safety 
standards-setting organization in trade agreements to which the United 
States is a party. EPA may establish a tolerance that is different from 
a Codex MRL; however, FFDCA section 408(b)(4) requires that EPA explain 
the reasons for departing from the Codex level.
    The Codex has not established a MRL for the fragrance components 
listed in Unit II above.

VII. Conclusion

    Therefore, exemptions from the requirement of a tolerance are 
established for residues of acetic acid (CAS Reg. No. 64-19-7), allyl 
cyclohexyl propionate (CAS Reg. No. 2705-87-5), butryic acid (CAS Reg. 
No. 107-92-6), butyl alcohol (CAS Reg. No. 71-36-3), citral (CAS Reg. 
No. 5392-40-5), citronellol (CAS Reg. No. 106-22-9), citronellyl 
acetate (CAS Reg. No. 150-84-5), [beta]-damascone, (Z)- (CAS Reg. No. 
23726-92-3), decanal (CAS Reg. No. 112-31-2), (E)-4-decenal (CAS Reg. 
No. 65405-70-1), decanoic acid (CAS Reg. No. 334-48-5), 1-decanol (CAS 
Reg. No. 112-30-1), 2,6-dimethyl-5-heptanal (CAS Reg. No. 106-72-9), 2-
dodecanol, (2E)- (CAS Reg. No. 20407-84-5), d-limonene (CAS Reg. No. 
5989-27-5), ethyl 2-methylbutyrate (CAS Reg. No. 452-79-1), (E)-
geraniol (CAS Reg. No. 106-24-1), (E)-geraniol acetate (CAS Reg. No. 
105-87-3), heptanal (CAS Reg. No. 111-71-7), heptanoic acid (CAS Reg. 
No. 111-14-8), heptyl alcohol (CAS Reg. No. 111-70-6), hexanal (CAS 
Reg. No. 66-25-1), hexanoic acid (CAS Reg. No. 142-62-1), (Z)-3-hexenol 
(CAS Reg. No. 928-96-1), (Z)-3-hexenol acetate (CAS Reg. No. 3681-71-
8), hexyl acetate (CAS Reg. No. 142-92-7), hexyl alcohol (CAS Reg. No. 
111-27-3), lauric acid (CAS Reg. No. 143-07-7), lauric aldehyde (CAS 
Reg. No. 112-54-9), lauryl alcohol (CAS Reg. No. 112-53-8), methyl-
[alpha]-ionone (CAS Reg. No. 127-42-4), 3-methyl-2-butenyl acetate (CAS 
Reg. No. 1191-16-8), 2-methylundecanal (CAS Reg. No. 110-41-8), 
myristaldehyde (CAS Reg. No. 124-25-4), myristic acid (CAS Reg. No. 
544-63-8), neryl acetate (CAS Reg. No. 141-12-8), n-hexanol (CAS Reg. 
No. 111-27-3), nonanal (CAS Reg. No. 124-19-6), nonanoic acid (CAS Reg. 
No. 112-05-0), nonyl alcohol (CAS Reg. No. 143-08-8), octanal (CAS Reg. 
No. 124-13-0), octanoic acid (CAS Reg. No. 124-07-2), 1-octanol (CAS 
Reg. No. 111-87-5), palmitic acid (CAS Reg. No. 57-10-3), propionic 
acid (CAS Reg. No. 79-09-4), stearic acid (CAS Reg. No. 57-11-4), 2-
tridecanal (CAS Reg. No. 7774-82-5), 3,5,5-trimethylhexanal (CAS Reg. 
No. 5435-64-3), undecanal (CAS Reg. No. 112-44-7), undecyl alcohol (CAS 
Reg. No. 112-42-5), valeraldehyde (CAS Reg. No. 110-62-3), and valeric 
acid (CAS Reg. No. 109-52-4) when used as fragrance components (i.e., 
inert ingredients) in antimicrobial pesticide formulations for use on 
food-contact surfaces in public eating places, dairy-processing 
equipment, and food-processing equipment and utensils at end-use 
concentrations not to exceed 100 ppm.

 VIII. Statutory and Executive Order Reviews

    This action establishes exemptions from the requirement of a 
tolerance under FFDCA section 408(e). The Office

[[Page 28842]]

of Management and Budget (OMB) has exempted tolerance actions from 
review under Executive Orders 12866, entitled Regulatory Planning and 
Review (58 FR 51735, October 4, 1993) and 13563, entitled Improving 
Regulation and Regulatory Review (76 FR 3821, January 21, 2011). As a 
result, this action is not subject to Executive Order 13211, entitled 
Actions Concerning Regulations That Significantly Affect Energy Supply, 
Distribution, or Use (66 FR 28355, May 22, 2001). Nor does it require 
OMB review or any Agency action under Executive Order 13045, entitled 
Protection of Children from Environmental Health Risks and Safety Risks 
(62 FR 19885, April 23, 1997).
    This action does not contain any information collections subject to 
OMB approval under the Paperwork Reduction Act (PRA) (44 U.S.C. 3501 et 
seq.); does not require any special considerations under Executive 
Order 12898, entitled Federal Actions to Address Environmental Justice 
in Minority Populations and Low-Income Populations (59 FR 7629, 
February 16, 1994); and does not involve any technical standards that 
would require Agency consideration of voluntary consensus standards 
pursuant to section 12(d) of the National Technology Transfer and 
Advancement Act (NTTAA) (15 U.S.C. 272 note).
    This action directly regulates growers, food processors, food 
handlers, and food retailers, but it does not regulate State or tribal 
governments. Nor does this action alter the relationships or 
distribution of power and responsibilities established by Congress in 
the preemption provisions of FFDCA section 408(n)(4). Therefore, the 
Agency has determined that Executive Orders 13132, entitled Federalism 
(64 FR 43255, August 10, 1999) and 13175, entitled Consultation and 
Coordination with Indian Tribal Governments (65 FR 67249, November 9, 
2000) do not apply to this action. In addition, this action does not 
impose any enforceable duty, contain any unfunded mandate, or otherwise 
significantly or uniquely affect small governments as described in the 
Unfunded Mandates Reform Act (UMRA) (2 U.S.C. 1501 et seq.).
    Under the Regulatory Flexibility Act (RFA) (5 U.S.C. 601 et seq.), 
the Agency hereby certifies that this action will not have significant 
negative economic impact on a substantial number of small entities. 
Establishing an exemption from the requirement of a pesticide tolerance 
is, in effect, the removal of a regulatory restriction on pesticide 
residues in food and thus such an action will not have any negative 
economic impact on any entities, including small entities.

X. Congressional Review Act

    Pursuant to the Congressional Review Act (5 U.S.C. 801 et seq.), 
EPA will submit a report containing this rule and other required 
information to the U.S. Senate, the U.S. House of Representatives, and 
the Comptroller General of the United States prior to publication of 
the rule in the Federal Register. This action is not a ``major rule'' 
as defined by 5 U.S.C. 804(2).

List of Subjects in 40 CFR Part 180

    Environmental protection, Administrative practice and procedure, 
Agricultural commodities, Pesticides and pests, Reporting and 
recordkeeping requirements.

    Dated: May 8, 2015.
G. Jeffrey Herndon,
Director, Registration Division, Office of Pesticide Programs.
    Therefore, 40 CFR chapter I is amended as follows:

PART 180--[AMENDED]

0
1. The authority citation for part 180 continues to read as follows:

    Authority:  21 U.S.C. 321(q), 346a and 371.


0
2. In Sec.  180.940, revise the entry for ``Acetic acid'' and 
alphabetically add the following inert ingredients to the table in 
paragraph (a) to read as follows:


Sec.  180.940  Tolerance exemptions for active and inert ingredients 
for use in antimicrobial formulations (Food-contact surface sanitizing 
solutions).

* * * * *
    (a) * * *

 
----------------------------------------------------------------------------------------------------------------
              Pesticide chemical                 CAS Reg. No.                        Limits
----------------------------------------------------------------------------------------------------------------
Acetic acid...................................         64-19-7  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
 
                                                  * * * * * * *
Allyl cylcohexylpropionate....................       2705-87-5  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
 
                                                  * * * * * * *
Butryic acid..................................        107-92-6  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Butyl alcohol.................................         71-36-3  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Citral........................................       5392-40-5  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Citronellol...................................        106-22-9  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Citronellyl acetate...........................        150-84-5  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
[beta]-Damascone, (Z)-........................      23726-92-3  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Decanal.......................................        112-31-2  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
(E)-4-Decenal.................................      65405-70-1  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Decanoic acid.................................        334-48-5  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
1-Decanol.....................................        112-30-1  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
 
                                                  * * * * * * *
2,6-Dimethyl-5-heptanal.......................        106-72-9  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
2-Dodecanol, (2E)-............................      20407-84-5  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
 
                                                  * * * * * * *
Ethyl 2-methylbutyrate........................        452-79-1  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
 
                                                  * * * * * * *
(E)-Geraniol..................................        106-24-1  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
(E)-Geraniol acetate..........................        105-87-3  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Heptanal......................................        111-71-7  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Heptanoic acid................................        111-14-8  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.

[[Page 28843]]

 
Heptyl alcohol................................        111-70-6  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Hexanal.......................................         66-25-1  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Hexanoic acid.................................        142-62-1  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
n-Hexanol.....................................        111-27-3  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
(Z)-3-Hexenol.................................        928-96-1  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
(Z)-3-Hexenol acetate.........................       3681-71-8  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Hexyl acetate.................................        142-92-7  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
 
                                                  * * * * * * *
Lauric acid...................................        143-07-7  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Lauric aldehyde...............................        112-54-9  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Lauryl alcohol................................        112-53-8  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
d-Limonene....................................       5989-27-5  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
 
                                                  * * * * * * *
Methyl-[alpha]-ionone.........................        127-42-4  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
3-Methyl-2-butenyl acetate....................       1191-16-8  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
2-Methylundecanal.............................        110-41-8  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
 
                                                  * * * * * * *
Myristaldehyde................................        124-25-4  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Myristic acid.................................        544-63-8  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Neryl acetate.................................        141-12-8  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
 
                                                  * * * * * * *
Nonanal.......................................        124-19-6  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Nonanoic acid.................................        112-05-0  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Nonyl alcohol.................................        143-08-8  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
 
                                                  * * * * * * *
Octanal.......................................        124-13-0  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
 
                                                  * * * * * * *
Octanoic acid.................................        124-07-2  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
1-Octanol.....................................        111-87-5  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
 
                                                  * * * * * * *
Palmitic acid.................................         57-10-3  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
 
                                                  * * * * * * *
Propionic acid................................         79-09-4  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
 
                                                  * * * * * * *
Stearic acid..................................         57-11-4  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
 
                                                  * * * * * * *
2-Tridecanal..................................       7774-82-5  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
3,5,5-Trimethylhexanal........................       5435-64-3  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Undecanal.....................................        112-44-7  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Undecyl alcohol...............................        112-42-5  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Valeraldehyde.................................        110-62-3  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
Valeric acid..................................        109-52-4  When ready for use, the end-use concentration is
                                                                 not to exceed 100 ppm.
 
                                                  * * * * * * *
----------------------------------------------------------------------------------------------------------------

* * * * *
[FR Doc. 2015-11959 Filed 5-19-15; 8:45 am]
 BILLING CODE 6560-50-P