[Federal Register Volume 80, Number 79 (Friday, April 24, 2015)]
[Proposed Rules]
[Page 22939]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2015-09566]



[[Page 22939]]

-----------------------------------------------------------------------

DEPARTMENT OF ENERGY

10 CFR Parts 429 and 431

[Docket No. EERE-2013-BT-TP-0055]
RIN 1905-AD50


Energy Conservation Program: Test Procedure for Pumps; Correction

AGENCY: Office of Energy Efficiency and Renewable Energy, Department of 
Energy.

ACTION: Notice of proposed rulemaking and public meeting; correction.

-----------------------------------------------------------------------

SUMMARY: On April 1, 2015, the U.S. Department of Energy (DOE) 
published in the Federal Register a notice of proposed rulemaking and 
public meeting for Energy Conservation Program: Test Procedure for 
Pumps. This document corrects terms in four equations.

DATES: April 24, 2015.

FOR FURTHER INFORMATION CONTACT: Ashley Armstrong, U.S. Department of 
Energy, Office of Energy Efficiency and Renewable Energy, Building 
Technologies Office, EE-5B, 1000 Independence Avenue SW., Washington, 
DC 20585-0121. Telephone: (202) 586-6590. Email: 
[email protected].

Corrections

    In the Federal Register published on April 1, 2015, in FR Doc. 
2015-06945, make the following corrections:
    1. On page 17604: Equation (6) is corrected by removing ``13.46'' 
and adding in its place ``17.80''. The corrected equation reads as 
follows:
[GRAPHIC] [TIFF OMITTED] TP24AP15.017

Appendix A to Subpart Y of Part 431--Uniform Test Method for the 
Measurement of Energy Consumption of Pumps. [Corrected]

    2. On page 17645: The equation in section II.B.1.1.1 is corrected 
by removing ``13.46'' and adding in its place ``17.80''. The corrected 
equation reads as follows:

[eta]pump,STD = -0.85 * 
In(Q100[percnt])2 - 0.38 * In(NS) * 
In(Q100[percnt]) - 11.48 * In(NS)2 + 
17.80 * In(Q100[percnt]) + 179.80 * In(NS) - (C - 
555.6)

    3. On page 17646: The equation in section III.D.1.2.1 is corrected 
by removing ``MotorH'' and adding in its place ``MotorHP''. The 
corrected equation reads as follows:
[GRAPHIC] [TIFF OMITTED] TP24AP15.001

    4. On page 17648: The equation in section V.D.1.2.1 is corrected by 
removing ``MotorHPMotorH'' and adding in its place ``MotorHP''. The 
corrected equation reads as follows:
[GRAPHIC] [TIFF OMITTED] TP24AP15.002


    Issued in Washington, DC, on April 20, 2015.
Kathleen B. Hogan,
Deputy Assistant Secretary for Energy Efficiency, Energy Efficiency and 
Renewable Energy.
[FR Doc. 2015-09566 Filed 4-23-15; 8:45 am]
BILLING CODE 6450-01-P