[Federal Register Volume 79, Number 231 (Tuesday, December 2, 2014)]
[Notices]
[Page 71503]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2014-28349]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Highway Administration


Buy America Waiver Notification

AGENCY: Federal Highway Administration (FHWA), DOT.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: This notice provides information regarding the FHWA's finding 
that a Buy America waiver is appropriate for the use of non-domestic 
20'' Trunnion mounted steel ball valve (ASCI 300/API 6D/ASME 318) on 
Federal-aid project HYSDOT PIN#0756.56 in the State of New York.

DATES: The effective date of the waiver is December 3, 2014.

FOR FURTHER INFORMATION CONTACT: For questions about this notice, 
please contact Mr. Gerald Yakowenko, FHWA Office of Program 
Administration, (202) 366-1562, or via email at 
[email protected]. For legal questions, please contact Mr. Jomar 
Maldonado, FHWA Office of the Chief Counsel, (202) 366-1373, or via 
email at [email protected]. Office hours for the FHWA are from 
8:00 a.m. to 4:30 p.m., e.t., Monday through Friday, except Federal 
holidays.

SUPPLEMENTARY INFORMATION: 

Electronic Access

    An electronic copy of this document may be downloaded from the 
Federal Register's home page at: http://www.archives.gov and the 
Government Printing Office's database at: http://www.access.gpo.gov/nara.

Background

    The FHWA's Buy America policy in 23 CFR 635.410 requires a domestic 
manufacturing process for any steel or iron products (including 
protective coatings) that are permanently incorporated in a Federal-aid 
construction project. The regulation also provides for a waiver of the 
Buy America requirements when the application would be inconsistent 
with the public interest or when satisfactory quality domestic steel 
and iron products are not sufficiently available. This notice provides 
information regarding the FHWA's finding that a Buy America waiver is 
appropriate to use non-domestic 20'' Trunnion mounted steel ball valve 
(ASCI 300/API 6D/ASME 318) in the State of New York.
    In accordance with Division A, section 122 of the ``Consolidated 
and Further Continuing Appropriations Act, 2012'' (Pub. L. 112-55), the 
FHWA published a notice of intent to issue a waiver on its Web site for 
non-domestic 20'' Trunnion mounted steel ball valve (ASCI 300/API 6D/
ASME 318) (http://www.fhwa.dot.gov/construction/contracts/waivers.cfm?id=99) on September 23rd. The FHWA received no comments in 
response to the publication. During the 15-day comment period, the FHWA 
conducted additional nationwide review to locate potential domestic 
manufacturers of the 20'' Trunnion mounted steel ball valve (ASCI 300/
API 6D/ASME 318). Based on all the information available to the Agency, 
the FHWA concludes that there are no domestic manufacturers of the 20'' 
Trunnion mounted steel ball valve (ASCI 300/API 6D/ASME 318).
    In accordance with the provisions of section 117 of the SAFETEA-LU 
Technical Corrections Act of 2008 (Pub. L. 110-244, 122 Stat. 1572), 
the FHWA is providing this notice as its finding that a waiver of Buy 
America requirements is appropriate. The FHWA invites public comment on 
this finding for an additional 15 days following the effective date of 
the finding. Comments may be submitted to the FHWA's Web site via the 
link provided to the New York waiver page noted above.

    Authority:  23 U.S.C. 313; Pub. L. 110-161, 23 CFR 635.410.

     Issued on: November 21, 2104.
Gregory G. Nadeau,
Acting Administrator, Federal Highway Administration.
[FR Doc. 2014-28349 Filed 12-1-14; 8:45 am]
BILLING CODE 4910-22-P