[Federal Register Volume 79, Number 215 (Thursday, November 6, 2014)]
[Notices]
[Pages 65991-65998]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2014-26368]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. OSHA-2013-0012]


Proposed Modification to the List of Appropriate NRTL Program 
Test Standards and the Scopes of Recognition of Several NRTLs

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: In this notice, OSHA proposes to: (1) Add new test standards 
to the Nationally Recognized Testing Laboratories (NRTL) Program's list 
of appropriate test standards; (2) delete or replace several test 
standards from the NRTL Program's list of appropriate test standards; 
and (3) update the scopes of recognition of several NRTLs.

DATES: Submit comments, information, and documents in response to this 
notice, or requests for an extension of time to make a submission, on 
or before December 8, 2014. All submissions must bear a postmark or 
provide other evidence of the submission date.

ADDRESSES:
    1. Electronically: Tender submissions electronically to the Federal 
eRulemaking Portal at http://www.regulations.gov. Follow the 
instructions online for making electronic submissions.
    2. Facsimile: If submissions, including attachments, are not longer 
than ten (10) pages, commenters may fax them to the OSHA Docket Office 
at (202) 693-1648.
    3. Regular or express mail, hand delivery, or messenger (courier) 
service: Tender submissions to the OSHA Docket Office, Docket No. OSHA-
2013-0012, Technical Data Center, Room N-2625, U.S. Department of 
Labor, 200 Constitution Avenue NW., Washington, DC 20210; telephone: 
(202) 693-2350 (TTY number: (877) 889-5627). Note that security 
procedures may result in significant delays in receiving submissions 
sent by regular mail. Contact the OSHA Docket Office for information 
about security procedures concerning delivery of materials by regular 
or express mail, hand delivery, or messenger (courier) service. The 
hours of operation for the OSHA Docket Office are 8:15 a.m.-4:45 p.m., 
e.t.
    4. Instructions: All submissions must include the Agency name and 
the OSHA docket number (OSHA-2013-0012). OSHA places comments and other 
materials, including any personal information, in the public docket

[[Page 65992]]

without revision, and these materials may be available online at http://www.regulations.gov. Therefore, the Agency cautions commenters about 
submitting statements they do not want made available to the public, or 
submitting comments that contain personal information (either about 
themselves or others) such as Social Security numbers, birth dates, and 
medical data.
    5. Docket: To read or download submissions or other material in the 
docket, go to http://www.regulations.gov or the OSHA Docket Office at 
the address above. All documents in the docket are listed in the http://www.regulations.gov index; however, some information (e.g., 
copyrighted material) is not publicly available to read or download 
through the Web site. All submissions, including copyrighted material, 
are available for inspection and copying at the OSHA Docket Office. 
Contact the OSHA Docket Office for assistance in locating docket 
submissions.
    6. Extension of comment period: Submit requests for an extension of 
the comment period on or before December 8, 2014 to the Office of 
Technical Programs and Coordination Activities, Directorate of 
Technical Support and Emergency Management, Occupational Safety and 
Health Administration, U.S. Department of Labor, 200 Constitution 
Avenue NW., Room N-3655, Washington, DC 20210, or by fax to (202) 693-
1644.

FOR FURTHER INFORMATION CONTACT: Information regarding this notice is 
available from the following sources:
    1. Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA 
Office of Communications, Room N-3647, U.S. Department of Labor, 200 
Constitution Avenue NW., Washington, DC 20210; telephone: (202) 693-
1999; email: [email protected].
    2. General and technical information: Contact Mr. Kevin Robinson, 
Acting Director, NRTL Program, Occupational Safety and Health 
Administration, Room N-3655, U.S. Department of Labor, 200 Constitution 
Avenue NW., Washington, DC 20210; telephone (202) 693-2110; email 
[email protected]. OSHA's Web page includes information about the 
NRTL Program (see http://www.osha.gov and select ``N'' in the ``A to Z 
Index'' located at the top of the Web page).
    3. Copies of this Federal Register notice: Electronic copies of 
this Federal Register notice are available at http://www.regulations.gov. This Federal Register notice, as well as other 
relevant information, is also available on OSHA's Web page at http://www.osha.gov.

SUPPLEMENTARY INFORMATION:

I. Background

    The NRTL Program recognizes organizations that provide product-
safety testing and certification services to manufacturers. These 
organizations perform testing and certification for purposes of the 
Program, to U.S. consensus-based product-safety test standards. The 
products covered by the NRTL Program consist of those items for which 
OSHA safety standards require ``certification'' by an NRTL. The 
requirements affect electrical products and 38 other types of products. 
OSHA does not develop or issue these test standards, but generally 
relies on standards-development organizations (SDOs), which develop and 
maintain the standards using a method that provides input and 
consideration of views of industry groups, experts, users, consumers, 
governmental authorities and others having broad experience in the 
safety field involved.

A. Addition of New Test Standards to the NRTL List of Appropriate Test 
Standards

    Periodically, OSHA will propose to add new test standards to the 
NRTL list of appropriate test standards following an evaluation of the 
test standard document. To qualify as an appropriate test standard, the 
Agency evaluates the document to (1) verify it represents a product 
category for which OSHA requires certification by an NRTL, (2) verify 
the document represents an end product and not a component, and (3) 
verify the document defines safety test specifications (not 
installation or operational performance specifications). OSHA becomes 
aware of new test standards through various avenues. For example, OSHA 
may become aware of new test standards by: (1) Monitoring notifications 
issued by certain SDOs; (2) reviewing applications by NRTLs or 
applicants seeking recognition to include a new test standard in their 
scopes of recognition; and (3) obtaining notification from 
manufacturers, manufacturing organizations, government agencies, or 
other parties that a new test standard may be appropriate to add to its 
list of appropriate standards. OSHA may determine to include a new test 
standard in the list, for example, if the test standard is for a 
particular type of product that another test standard also covers, 
covers a type of product that no standard previously covered, or is 
otherwise new to the NRTL Program.

B. SDO Deletion and Replacement of Test Standards

    The NRTL Program regulations require that appropriate test 
standards be current (29 CFR 1910.7(c)). A test standard withdrawn by a 
standards-development organization is no longer considered an 
appropriate test standard (Directive, App. C.XIV.B). It is OSHA's 
policy to remove recognition of withdrawn test standards by issuing a 
correction notice in the Federal Register for all NRTLs recognized for 
the withdrawn test standards. However, SDOs frequently will designate a 
replacement standard for standards they withdraw. OSHA will recognize 
an NRTL for an appropriate replacement test standard if the NRTL has 
the requisite testing and evaluation capability for the replacement 
test standard.
    One method that NRTLs may use to show such capability involves an 
analysis to determine whether any testing and evaluation requirements 
of existing test standards in an NRTL's scope are comparable (i.e., are 
completely or substantially identical) to the requirements in the 
replacement test standard. If OSHA's analysis shows the replacement 
test standard does not require additional or different technical 
capability than an existing test standard(s), the replacement test 
standard is comparable to the existing test standard(s), and OSHA can 
add the replacement test standard to affected NRTLs' scopes of 
recognition. If OSHA's analysis shows the replacement test standard 
requires an additional or different technical capability, or the 
replacement test standard is not comparable to any existing test 
standards, each affected NRTL that seeks to have OSHA add the 
replacement test standard to the NRTL's scope of recognition must 
provide information to OSHA that demonstrates technical capability.

C. Other Reasons for Removal of Test Standards From the NRTL List of 
Appropriate Test Standards

    OSHA may choose to remove a test standard from the NRTL list of 
appropriate test standards based on an internal review in which NRTL 
Program staff review the NRTL list of appropriate test standards to 
determine if the test standards conform to the definition of an 
appropriate test standard defined in NRTL Program regulations and 
policy. There are several reasons for removing a test standard based on 
this review. First, a document that provides the methodology for a 
single test is a test method rather than an appropriate test

[[Page 65993]]

standard (29 CFR 1910.7(c)). As stated above, a test standard must 
specify the safety requirements for a specific type of product(s). A 
test method, however, is a ``specified technical procedure for 
performing a test'' (Directive, App. B). As such, a test method is not 
an appropriate test standard. While an NRTL may use a test method to 
determine if certain safety requirements are met, a test method is not 
itself a safety requirement for a specific product category.
    Second, a document that focuses primarily on usage, installation, 
or maintenance requirements would also not be considered an appropriate 
test standard (Directive, App. D.IV.B). In some cases, however, a 
document may also provide safety test specifications in addition to 
usage, installation, and maintenance requirements. In such cases, the 
document would be retained as an appropriate test standard based on the 
safety test specifications.
    Finally, a document may not be considered an appropriate test 
standard if the document covers products for which OSHA does not 
require testing and certification (Directive, App. D.IV.A). Similarly, 
a document that covers electrical-product components would not be 
considered an appropriate test standard. These documents apply to types 
of components that have limitation(s) or condition(s) on their use, in 
that they are not appropriate for use as end-use products. These 
documents also specify that these types of components are for use only 
as part of an end-use product. NRTLs, however, evaluate such components 
only in the context of evaluating whether end-use products requiring 
NRTL approval are safe for use in the workplace. Testing such 
components alone would not indicate that the end-use products 
containing the components are safe for use. Accordingly, as a matter of 
policy, OSHA considers that documents covering such components are not 
appropriate test standards under the NRTL Program. OSHA notes, however, 
that it is not proposing to delete from NRTLs' scopes of recognition 
any test standards covering end-use products that contain such 
components.\1\
---------------------------------------------------------------------------

    \1\ OSHA notes also that some types of devices covered by these 
documents, such as capacitors and transformers, may be end-use 
products themselves, and tested under other test standards 
applicable to such products. For example, the following test 
standard covers transformers that are end-use products: UL 1562 
Standard for Transformers, Distribution, Dry-Type--Over 600 Volts. 
OSHA is not proposing to delete such test standards from NRTLs' 
scopes of recognition.
---------------------------------------------------------------------------

    In addition, OSHA notes that, to conform to a test standard 
covering an end-use product, an NRTL must still determine that the 
components in the product comply with the components' specific test 
standards. In making this determination, NRTLs may test the components 
themselves, or accept the testing of a qualified testing organization 
that a given component conforms to its particular test standard. OSHA 
reviews each NRTL's procedures to determine which approach the NRTL 
will use to address components, and reviews the end-use product testing 
to verify the NRTL appropriately addresses that product's components.

II. Proposal To Add New Test Standards to the NRTL Program's List of 
Appropriate Test Standards

    In this notice, OSHA proposes to add several new test standards to 
the NRTL Program's list of appropriate test standards. Table 1 below 
lists test standards that are new to the NRTL Program. OSHA 
preliminarily determined that these test standards are appropriate test 
standards and proposes to include these test standards in the NRTL 
Program's list of appropriate test standards. OSHA seeks public comment 
on this preliminary determination.

 Table 1--Test Standards OSHA Is Proposing To Add to the NRTL Program's
                   List of Appropriate Test Standards
------------------------------------------------------------------------
           Test standard                     Test standard title
------------------------------------------------------------------------
AAMI HA60601-1-11.................  Medical Electrical Equipment--Part 1-
                                     11: General requirements for basic
                                     safety and essential performance--
                                     Collateral Standard: Requirements
                                     for medical electrical equipment
                                     and medical electrical systems used
                                     in the home healthcare.
AAMI 60601-2-2....................  Medical electrical equipment--Part 2-
                                     2: Particular requirements for the
                                     basic safety and essential
                                     performance of high frequency
                                     surgery equipment and high
                                     frequency surgical accessories.
AAMI 60601-2-4....................  Medical electrical equipment--Part 2-
                                     4: Particular requirements for
                                     basic safety and essential
                                     performance of cardiac
                                     defibrillators.
AAMI 60601-2-16...................  Medical electrical equipment,--Part
                                     2-16: Particular requirements for
                                     basic safety and essential
                                     performance of hemodialysis,
                                     hemodiafiltration and
                                     hemofiltration equipment.
AAMI 60601-2-19...................  Medical Electrical Equipment--Part 2-
                                     19: Particular requirements for the
                                     basic safety and essential
                                     performance of infant incubators.
AAMI 60601-2-20...................  Medical Electrical Equipment--Part 2-
                                     20: Particular requirements for the
                                     basic safety and essential
                                     performance of infant transport
                                     incubators.
AAMI 60601-2-21...................  Medical Electrical Equipment--Part 2-
                                     21: Particular requirements for the
                                     basic safety and essential
                                     performance of infant radiant
                                     warmers.
AAMI 60601-2-25...................  Medical electrical equipment--Part 2-
                                     25: Particular requirements for the
                                     basic safety and essential
                                     performance of electrocardiographs.
AAMI 60601-2-27...................  Medical electrical equipment--Part 2-
                                     27: Particular requirements for the
                                     basic safety and essential
                                     performance of electrocardiographic
                                     monitoring equipment.
AAMI 60601-2-47...................  Medical electrical equipment--Part 2-
                                     47: Particular requirements for the
                                     basic safety and essential
                                     performance of ambulatory
                                     electrocardiographic systems.
AAMI 60601-2-50...................  Medical Electrical Equipment--Part 2-
                                     50: Particular requirements for the
                                     basic safety and essential
                                     performance of infant phototherapy
                                     equipment.
AAMI 80601-2-30...................  Medical electrical equipment--Part 2-
                                     30: Particular requirements for the
                                     basic safety and essential
                                     performance of automated non-
                                     invasive sphygmomanometers.
AAMI 80601-2-58...................  Medical Electrical Equipment--Part 2-
                                     58: Particular requirements for the
                                     basic safety and essential
                                     performance of lens removal devices
                                     and vitrectomy devices for
                                     ophthalmic surgery.
ISA 60079-25......................  Explosive Atmospheres--Part 25:
                                     Intrinsically Safe Electrical
                                     Systems.
ISA 60079-27......................  Explosive atmospheres--Part 27:
                                     Fieldbus Intrinsically Safe Concept
                                     (FISCO) and Fieldbus Non-Incendive
                                     Concept (FNICO).

[[Page 65994]]

 
UL 60745-2-23.....................  Hand-Held Motor-Operated Electric
                                     Tools--Safety--Part 2-23:
                                     Particular Requirements for Die
                                     Grinders and Small Rotary Tools.
------------------------------------------------------------------------

III. Proposal To Delete or Replace Several Test Standards From the NRTL 
Program's List of Appropriate Test Standards

    In this notice, OSHA proposes to delete several withdrawn and 
deleted test standards from the NRTL Program's list of appropriate test 
standards. OSHA also proposes to incorporate into the NRTL Program's 
list of appropriate test standards replacement test standards for some 
of the withdrawn and deleted test standards.
    Table 2 lists the test standards that OSHA proposes to delete from 
the NRTL Program's list of appropriate test standards, as well as an 
abbreviated rationale for OSHA's proposed action. For a full discussion 
of the rationale, see Sections I.B and I.C of this notice. Table 2 also 
lists corresponding replacement test standards that OSHA proposes to 
incorporate into the NRTL Program's list of appropriate test standards 
(when applicable). OSHA seeks public comment on this preliminary 
determination.
    OSHA notes also that Table 2 lists the subject test standards and 
the proposed action with regard to each of these test standards without 
indicating how the proposed action will affect individual NRTLs. 
Section IV of this notice discusses how the proposed action will affect 
individual NRTLs.

     Table 2--List of Test Standards OSHA Proposes To Delete From or
              Incorporate Into NRTLs Scopes of Recognition
------------------------------------------------------------------------
                                                           Proposed
                                      Reason for       replacement test
 Proposed deleted test standard    proposed deletion    standard(s) (if
                                                          applicable)
------------------------------------------------------------------------
FM 3620--Purged and Pressurized   FM 3620 includes    NFPA 496--Purged
 Electrical Equipment for          references to out-  and Pressurized
 Hazardous Locations.               of-date            Enclosures for
                                   standards.          Electrical
                                                       Equipment.
UL 60950--Information Technology  Standard has been   UL 60950-1--
 Equipment.                        withdrawn and       Information
                                   directly replaced   Technology
                                   by a new standard.  Equipment--Safety
                                                       -Part 1: General
                                                       Requirements is
                                                       currently listed
                                                       as an appropriate
                                                       NRTL standard.
UL 61010A-1--Electrical           These three         UL 61010-1--
 Equipment for Laboratory Use;     standards have      Electrical
 Part 1: General Requirements.     been withdrawn      Equipment for
UL 61010B-1--Electrical            and consolidated    Measurement,
 Measuring and Test Equipment;     into a single       Control, and
 Part 1: General Requirements.     standard.           Laboratory Use;
UL 61010C-1--Process Control                           Part 1: General
 Equipment.                                            Requirements is
                                                       currently listed
                                                       as an appropriate
                                                       NRTL standard.
UL 1004--Electrical Motors......  Standard has been   UL 1004-1--
                                   withdrawn.          Rotating
                                                       Electrical
                                                       machines--General
                                                       Requirements is
                                                       currently listed
                                                       as an appropriate
                                                       NRTL standard.
UL 681- Installation and          Standard is an      None.
 Classification of Burglar and     installation
 Holdup Alarm System.              standard and not
                                   an end-product
                                   standard. It does
                                   not meet the
                                   requirements of
                                   the NRTL Program.
UL 827--Central-Station Alarm     Standard is an      None.
 Services.                         installation
                                   standard and not
                                   an end-product
                                   standard. It does
                                   not meet the
                                   requirements of
                                   the NRTL Program.
------------------------------------------------------------------------

    OSHA seeks comment on whether its proposed deletions and 
incorporations are appropriate, and whether it omitted any appropriate 
replacement test standard that is comparable to a withdrawn test 
standard. If OSHA determines that it omitted any appropriate 
replacement test standard that is comparable to a withdrawn test 
standard, it will, in its final determination, incorporate that 
replacement test standard into the scope of recognition of each 
affected NRTL.

IV. Proposed Modifications to Affected NRTLs' Scopes of Recognition

    In this notice, OSHA proposes to update the scopes of recognition 
of several NRTLs. The tables in this section (Table 3 thru Table 16) 
list, for each affected NRTL, the test standard(s) that OSHA proposes 
to delete from its scope of recognition and, when applicable, the test 
standard(s) that OSHA proposes to incorporate into its scope of 
recognition to replace withdrawn (and deleted) test standards. OSHA 
seeks comment on whether the proposed deletions and incorporations are 
correct and whether the replacement standard(s) require additional or 
different technical capability.

Table 3--Test Standards OSHA Proposes To Delete From or Incorporate Into
    the Scope of Recognition of Canadian Standards Association (CSA)
------------------------------------------------------------------------
                                                           Proposed
                                      Reason for       replacement test
 Proposed deleted test standard    proposed deletion    standard(s) (if
                                                          applicable)
------------------------------------------------------------------------
FM 3620--Purged and Pressurized   FM 3620 includes    NFPA 496--Purged
 Electrical Equipment for          references to out-  and Pressurized
 Hazardous Locations.              of-date standards.  Enclosures for
                                                       Electrical
                                                       Equipment.

[[Page 65995]]

 
UL 60950--Information Technology  Standard has been   UL 60950-1--
 Equipment.                        withdrawn and       Information
                                   directly replaced   Technology
                                   by a new standard.  Equipment--Safety
                                                       -Part 1: General
                                                       Requirements.
UL 61010A-1--Electrical
 Equipment for Laboratory Use;
 Part 1: General Requirements.
UL 61010B-1--Electrical
 Measuring and Test Equipment;
 Part 1: General Requirements.
UL 61010C-1--Process Control      These standards     UL 61010-1--
 Equipment.                        have been           Electrical
                                   withdrawn and       Equipment for
                                   consolidated into   Measurement,
                                   a single standard.  Control, and
                                                       Laboratory Use;
                                                       Part 1: General
                                                       Requirements.
UL 1004--Electrical Motors......  Standard has been   NRTLs wishing to
                                   withdrawn.          add UL 1004-1
                                                       must submit an
                                                       application to
                                                       OSHA.
UL 681--Installation and          Standard is an      None.
 Classification of Burglar and     installation
 Holdup Alarm System.              standard and not
                                   an end-product
                                   standard. It does
                                   not meet the
                                   requirements of
                                   the NRTL Program.
UL 827--Central-Station Alarm     Standard is an      None.
 Services.                         installation
                                   standard and not
                                   an end-product
                                   standard. It does
                                   not meet the
                                   requirements of
                                   the NRTL Program.
------------------------------------------------------------------------


Table 4--Test Standards OSHA Proposes To Delete From or Incorporate Into
           the Scope of Recognition of Curtis-Straus LLC (CSL)
------------------------------------------------------------------------
                                                           Proposed
                                      Reason for       replacement test
 Proposed deleted test standard    proposed deletion   standard(s)  (if
                                                          applicable)
------------------------------------------------------------------------
UL 60950--Information Technology  Standard has been   UL 60950-1--
 Equipment.                        withdrawn and       Information
                                   directly replaced   Technology
                                   by a new standard.  Equipment--Safety
                                                       -Part 1: General
                                                       Requirements.
UL 61010A-1--Electrical           These standards     UL 61010-1--
 Equipment for Laboratory Use;     have been           Electrical
 Part 1: General Requirements.     withdrawn and       Equipment for
UL 61010B-1--Electrical            consolidated into   Measurement,
 Measuring and Test Equipment;     a single standard.  Control, and
 Part 1: General Requirements..                        Laboratory Use;
                                                       Part 1: General
                                                       Requirements.
------------------------------------------------------------------------


Table 5--Test Standards OSHA Proposes To Delete From or Incorporate Into
             the Scope of Recognition FM Approvals LLC (FM)
------------------------------------------------------------------------
                                                           Proposed
                                      Reason for       replacement test
 Proposed deleted test standard    proposed deletion   standard(s)  (if
                                                          applicable)
------------------------------------------------------------------------
FM 3620--Purged and Pressurized   FM 3620 includes    NFPA 496--Purged
 Electrical Equipment for          references to out-  and Pressurized
 Hazardous Locations.              of-date standards.  Enclosures for
                                                       Electrical
                                                       Equipment.
UL 60950--Information Technology  Standard has been   UL 60950-1--
 Equipment.                        withdrawn and       Information
                                   directly replaced   Technology
                                   by a new standard.  Equipment--Safety
                                                       -Part 1: General
                                                       Requirements.
UL 61010A-1--Electrical           These standards     UL 61010-1--
 Equipment for Laboratory Use;     have been           Electrical
 Part 1: General Requirements.     withdrawn and       Equipment for
UL 61010B-1--Electrical            consolidated into   Measurement,
 Measuring and Test Equipment;     a single standard.  Control, and
 Part 1: General Requirements..                        Laboratory Use;
                                                       Part 1: General
                                                       Requirements.
UL 827--Central-Station Alarm     Standard is an      None.
 Services.                         installation
                                   standard and not
                                   an end-product
                                   standard. It does
                                   not meet the
                                   requirements of
                                   the NRTL Program.
------------------------------------------------------------------------


Table 6--Test Standards OSHA Proposes To Delete From or Incorporate Into
 the Scope of Recognition of Intertek Testing Services NA, Inc. (ITSNA)
------------------------------------------------------------------------
                                                           Proposed
                                      Reason for       replacement test
 Proposed deleted test standard    proposed deletion   standard(s)  (if
                                                          applicable)
------------------------------------------------------------------------
UL 60950--Information Technology  Standard has been   UL 60950-1--
 Equipment.                        withdrawn and       Information
                                   directly replaced   Technology
                                   by a new standard.  Equipment--Safety
                                                       -Part 1: General
                                                       Requirements.
UL 61010A-1--Electrical           These standards     UL 61010-1--
 Equipment for Laboratory Use;     have been           Electrical
 Part 1: General Requirements.     withdrawn and       Equipment for
UL 61010B-1--Electrical            consolidated into   Measurement,
 Measuring and Test Equipment;     a single standard.  Control, and
 Part 1: General Requirements..                        Laboratory Use;
UL 61010C-1--Process Control                           Part 1: General
 Equipment..                                           Requirements.

[[Page 65996]]

 
UL 1004--Electrical Motors......  Standard has been   NRTLs wishing to
                                   withdrawn.          add UL 1004-1
                                                       must submit an
                                                       application to
                                                       OSHA.
UL 681--Installation and          Standard is an      None.
 Classification of Burglar and     installation
 Holdup Alarm System.              standard and not
                                   an end-product
                                   standard. It does
                                   not meet the
                                   requirements of
                                   the NRTL Program.
UL 827--Central-Station Alarm     Standard is an      None.
 Services.                         installation
                                   standard and not
                                   an end-product
                                   standard. It does
                                   not meet the
                                   requirements of
                                   the NRTL Program.
------------------------------------------------------------------------


Table 7--Test Standards OSHA Proposes To Delete From or Incorporate Into
        the Scope of Recognition of MET Laboratories, Inc. (MET)
------------------------------------------------------------------------
                                                           Proposed
                                      Reason for       replacement test
 Proposed deleted test standard    proposed deletion   standard(s)  (if
                                                          applicable)
------------------------------------------------------------------------
UL 60950--Information Technology  Standard has been   UL 60950-1--
 Equipment.                        withdrawn and       Information
                                   directly replaced   Technology
                                   by a new standard.  Equipment--Safety
                                                       -Part 1: General
                                                       Requirements.
UL 61010A-1--Electrical           These standards     UL 61010-1--
 Equipment for Laboratory Use;     have been           Electrical
 Part 1: General Requirements.     withdrawn and       Equipment for
UL 61010B-1--Electrical            consolidated into   Measurement,
 Measuring and Test Equipment;     a single standard.  Control, and
 Part 1: General Requirements..                        Laboratory Use;
UL 61010C-1--Process Control                           Part 1: General
 Equipment..                                           Requirements.
------------------------------------------------------------------------


Table 8--Test Standards OSHA Proposes To Delete From or Incorporate Into
               the Scope of Recognition of Nemko-CCL (CCL)
------------------------------------------------------------------------
                                                           Proposed
                                      Reason for       replacement test
 Proposed deleted test standard    proposed deletion   standard(s)  (if
                                                          applicable)
------------------------------------------------------------------------
UL 60950--Information Technology  Standard has been   UL 60950-1--
 Equipment.                        withdrawn and       Information
                                   directly replaced   Technology
                                   by a new standard.  Equipment--Safety
                                                       -Part 1: General
                                                       Requirements.
UL 61010A-1--Electrical           Standard has been   UL 61010-1--
 Equipment for Laboratory Use;     withdrawn and       Electrical
 Part 1: General Requirements.     consolidated with   Equipment for
                                   others into a       Measurement,
                                   single standard.    Control, and
                                                       Laboratory Use;
                                                       Part 1: General
                                                       Requirements.
------------------------------------------------------------------------


 Table 9--Test Standard OSHA Proposes To Delete From or Incorporate Into
           the Scope of Recognition of NSF International (NSF)
------------------------------------------------------------------------
                                                           Proposed
                                      Reason for       replacement test
 Proposed deleted test standard    proposed deletion   standard(s)  (if
                                                          applicable)
------------------------------------------------------------------------
UL 61010A-1--Electrical           Standard has been   UL 61010-1--
 Equipment for Laboratory Use;     withdrawn and       Electrical
 Part 1: General Requirements.     consolidated with   Equipment for
                                   others into a       Measurement,
                                   single standard.    Control, and
                                                       Laboratory Use;
                                                       Part 1: General
                                                       Requirements.
------------------------------------------------------------------------


Table 10--Test Standard OSHA Proposes To Delete From or Incorporate Into
        the Scope of Recognition of QPS Evaluation Services (QPS)
------------------------------------------------------------------------
                                                           Proposed
                                      Reason for       replacement test
 Proposed deleted test standard    proposed deletion   standard(s)  (if
                                                          applicable)
------------------------------------------------------------------------
UL 60950--Information Technology  Standard has been   UL 60950-1--
 Equipment.                        withdrawn and       Information
                                   directly replaced   Technology
                                   by a new standard.  Equipment--Safety
                                                       -Part 1: General
                                                       Requirements.
------------------------------------------------------------------------


[[Page 65997]]


  Table 11--Test Standards OSHA Proposes To Delete From or Incorporate
       Into the Scope of Recognition SGS North America, Inc. (SGS)
------------------------------------------------------------------------
                                                           Proposed
                                      Reason for       replacement test
 Proposed deleted test standard    proposed deletion   standard(s)  (if
                                                          applicable)
------------------------------------------------------------------------
UL 60950--Information Technology  Standard has been   UL 60950-1--
 Equipment.                        withdrawn and       Information
                                   directly replaced   Technology
                                   by a new standard.  Equipment--Safety
                                                       -Part 1: General
                                                       Requirements.
UL 61010A-1--Electrical           These standards     UL 61010-1--
 Equipment for Laboratory Use;     have been           Electrical
 Part 1: General Requirements.     withdrawn and       Equipment for
UL 61010B-1--Electrical            consolidated into   Measurement,
 Measuring and Test Equipment;     a single standard.  Control, and
 Part 1: General Requirements.                         Laboratory Use;
                                                       Part 1: General
                                                       Requirements.
------------------------------------------------------------------------


Table 12--Test Standard OSHA Proposes To Delete From or Incorporate Into
     the Scope of Recognition of Southwest Research Institute (SWRI)
------------------------------------------------------------------------
                                                           Proposed
                                      Reason for       replacement test
 Proposed deleted test standard    proposed deletion   standard(s)  (if
                                                          applicable)
------------------------------------------------------------------------
UL 60950--Information Technology  Standard has been   UL 60950-1--
 Equipment.                        withdrawn and       Information
                                   directly replaced   Technology
                                   by a new standard.  Equipment--Safety
                                                       -Part 1: General
                                                       Requirements.
------------------------------------------------------------------------


  Table 13--Test Standards OSHA Proposes To Delete From or Incorporate
  Into the Scope of Recognition of TUV Rhineland of North America, Inc.
                                  (TUV)
------------------------------------------------------------------------
                                                           Proposed
                                      Reason for       replacement test
 Proposed deleted test standard    proposed deletion   standard(s)  (if
                                                          applicable)
------------------------------------------------------------------------
UL 60950--Information Technology  Standard has been   UL 60950-1--
 Equipment.                        withdrawn and       Information
                                   directly replaced   Technology
                                   by a new standard.  Equipment--Safety
                                                       -Part 1: General
                                                       Requirements.
UL 61010A-1--Electrical           These standards     UL 61010-1--
 Equipment for Laboratory Use;     have been           Electrical
 Part 1: General Requirements.     withdrawn and       Equipment for
UL 61010B-1--Electrical            consolidated into   Measurement,
 Measuring and Test Equipment;     a single standard.  Control, and
 Part 1: General Requirements.                         Laboratory Use;
UL 61010C-1--Process Control                           Part 1: General
 Equipment.                                            Requirements.
UL 1004--Electrical Motors......  Standard has been   NRTLs wishing to
                                   withdrawn.          add UL 1004-1
                                                       must submit an
                                                       application to
                                                       OSHA.
UL 681- Installation and          Standard is an      None.
 Classification of Burglar and     installation
 Holdup Alarm System.              standard and not
                                   an end-product
                                   standard. It does
                                   not meet the
                                   requirements of
                                   the NRTL Program.
UL 827--Central-Station Alarm     Standard is an      None.
 Services.                         installation
                                   standard and not
                                   an end-product
                                   standard. It does
                                   not meet the
                                   requirements of
                                   the NRTL Program.
------------------------------------------------------------------------


  Table 14--Test Standards OSHA Proposes To Delete From or Incorporate
     Into the Scope of Recognition of TUV SUD America, Inc. (TUVAM)
------------------------------------------------------------------------
                                                           Proposed
                                      Reason for       replacement test
 Proposed deleted test standard    proposed deletion   standard(s)  (if
                                                          applicable)
------------------------------------------------------------------------
UL 60950--Information Technology  Standard has been   UL 60950-1--
 Equipment.                        withdrawn and       Information
                                   directly replaced   Technology
                                   by a new standard.  Equipment--Safety
                                                       -Part 1: General
                                                       Requirements.
UL 61010A-1--Electrical           These standards     UL 61010-1--
 Equipment for Laboratory Use;     have been           Electrical
 Part 1: General Requirements.     withdrawn and       Equipment for
UL 61010B-1--Electrical            consolidated into   Measurement,
 Measuring and Test Equipment;     a single standard.  Control, and
 Part 1: General Requirements.                         Laboratory Use;
                                                       Part 1: General
                                                       Requirements.
UL 1004--Electrical Motors......  Standard has been   NRTLs wishing to
                                   withdrawn.          add UL 1004-1
                                                       must submit an
                                                       application to
                                                       OSHA.
------------------------------------------------------------------------


[[Page 65998]]


  Table 15--Test Standards OSHA Proposes To Delete From or Incorporate
   Into the Scope of Recognition of TUV SUD Product Services (TUVPSG)
------------------------------------------------------------------------
                                                           Proposed
                                      Reason for       replacement test
 Proposed deleted test standard    proposed deletion   standard(s)  (if
                                                          applicable)
------------------------------------------------------------------------
UL 60950--Information Technology  Standard has been   UL 60950-1--
 Equipment.                        withdrawn and       Information
                                   directly replaced   Technology
                                   by a new standard.  Equipment--Safety
                                                       -Part 1: General
                                                       Requirements.
UL 61010A-1--Electrical           These standards     UL 61010-1--
 Equipment for Laboratory Use;     have been           Electrical
 Part 1: General Requirements.     withdrawn and       Equipment for
UL 61010B-1--Electrical            consolidated into   Measurement,
 Measuring and Test Equipment;     a single standard.  Control, and
 Part 1: General Requirements.                         Laboratory Use;
                                                       Part 1: General
                                                       Requirements.
UL 1004--Electrical Motors......  Standard has been   NRTLs wishing to
                                   withdrawn.          add UL 1004-1
                                                       must submit an
                                                       application to
                                                       OSHA.
------------------------------------------------------------------------


  Table 16--Test Standards OSHA Proposes To Delete From or Incorporate
  Into the Scope of Recognition of Underwriters Laboratories Inc. (UL)
------------------------------------------------------------------------
                                                           Proposed
                                      Reason for       replacement test
 Proposed deleted test standard    proposed deletion   standard(s)  (if
                                                          applicable)
------------------------------------------------------------------------
UL 60950--Information Technology  Standard has been   UL 60950-1--
 Equipment.                        withdrawn and       Information
                                   directly replaced   Technology
                                   by a new standard.  Equipment--Safety
                                                       -Part 1: General
                                                       Requirements.
UL 61010A-1--Electrical           These standards     UL 61010-1--
 Equipment for Laboratory Use;     have been           Electrical
 Part 1: General Requirements.     withdrawn and       Equipment for
UL 61010B-1--Electrical            consolidated into   Measurement,
 Measuring and Test Equipment;     a single standard.  Control, and
 Part 1: General Requirements.                         Laboratory Use;
                                                       Part 1: General
                                                       Requirements.
UL 1004--Electrical Motors......  Standard has been   NRTLs wishing to
                                   withdrawn.          add UL 1004-1
                                                       must submit an
                                                       application to
                                                       OSHA.
UL 681--Installation and          Standard is an      None.
 Classification of Burglar and     installation
 Holdup Alarm System.              standard and not
                                   an end-product
                                   standard. It does
                                   not meet the
                                   requirements of
                                   the NRTL Program.
UL 827--Central-Station Alarm     Standard is an      None.
 Services.                         installation
                                   standard and not
                                   an end-product
                                   standard. It does
                                   not meet the
                                   requirements of
                                   the NRTL Program.
------------------------------------------------------------------------

    OSHA will incorporate into its informational Web pages the 
modifications OSHA decides to make to each NRTL's scope of recognition. 
These Web pages detail the scope of recognition for each NRTL, 
including the test standards the NRTL may use to test and certify 
products under OSHA's NRTL Program. OSHA also will add, to its 
``Current List of Appropriate Test Standards under the NRTL Program'' 
Web page, those test standards it adds to the NRTL list of appropriate 
test standards, and add, to its ``Current List of Removed Test 
Standards'' Web page, those test standards that OSHA no longer 
recognizes or permits under the NRTL Program. Access to these Web pages 
is available at http://www.osha.gov/dts/otpca/nrtl/index.html.

V. Authority and Signature

    David Michaels, Ph.D., MPH, Assistant Secretary of Labor for 
Occupational Safety and Health, 200 Constitution Avenue NW., 
Washington, DC 20210, authorized the preparation of this notice. 
Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C. 
657(g)(2)), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25, 
2012), and 29 CFR 1910.7.

    Signed at Washington, DC, on October 31, 2014.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2014-26368 Filed 11-5-14; 8:45 am]
BILLING CODE 4510-26-P