[Federal Register Volume 79, Number 112 (Wednesday, June 11, 2014)]
[Rules and Regulations]
[Pages 33469-33474]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2014-13383]



[[Page 33469]]

-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

40 CFR Part 180

[EPA-HQ-OPP-2013-0210; FRL-9910-87]


[alpha]-alkyl-[omega]-hydroxypoly (oxypropylene) and/or poly 
(oxyethylene) Polymers Where the Alkyl Chain Contains a Minimum of Six 
Carbons, and [alpha]-alkyl-[omega]-hydroxypoly (oxypropylene) and/or 
poly (oxyethylene) polymers Where the Alkyl Chain Contains a Minimum of 
Six Carbons and a Minimum Number Average Molecular Weight (in amu) 
1,100; Exemption From the Requirement of a Tolerance

AGENCY: Environmental Protection Agency (EPA).

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: This regulation establishes an exemption from the requirement 
of a tolerance for residues of [alpha]-alkyl-[omega]-hydroxypoly 
(oxypropylene) and/or poly (oxyethylene) polymers where the alkyl chain 
contains a minimum of six carbons, and [alpha]-alkyl-[omega]-
hydroxypoly (oxypropylene) and/or poly (oxyethylene) polymers where the 
alkyl chain contains a minimum of six carbons and a minimum number 
average molecular weight (in amu) 1,100 herein referred to as ``AAAs'' 
(alkyl alcohol alkoxylates) to include Chemical Abstract Service 
Registry Number (CAS Reg. No.) 116810-31-2 when used as an inert 
ingredient as a surfactant in pesticide formulations, under 40 CFR 
180.910, 180.930, 180.940a, and 180.960, in growing crops without 
limitations. Akzo Nobel Surface Chemistry submitted a petition to EPA 
under the Federal Food, Drug, and Cosmetic Act (FFDCA), requesting an 
amendment to an existing requirement of a tolerance. This regulation 
eliminates the need to establish a maximum permissible level for 
residues of AAAs.

DATES: This regulation is effective June 11, 2014. Objections and 
requests for hearings must be received on or before August 11, 2014, 
and must be filed in accordance with the instructions provided in 40 
CFR part 178 (see also Unit I.C. of the SUPPLEMENTARY INFORMATION).

ADDRESSES: EPA has established a docket for this action under docket 
identification (ID) number EPA-HQ-OPP-2013-0210. All documents in the 
docket are listed in the docket index available at http://www.regulations.gov. Although listed in the index, some information is 
not publicly available, e.g., Confidential Business Information (CBI) 
or other information whose disclosure is restricted by statute. Certain 
other material, such as copyrighted material, is not placed on the 
Internet and will be publicly available only in hard copy form. 
Publicly available docket materials are available in the electronic 
docket at http://www.regulations.gov, or, if only available in hard 
copy, at the OPP Regulatory Public Docket in Rm. S-4400, One Potomac 
Yard (South Bldg.), 2777 S. Crystal Dr., Arlington, VA. The Docket 
Facility is open from 8:30 a.m. to 4 p.m., Monday through Friday, 
excluding legal holidays. The Docket Facility telephone number is (703) 
305-5805.

FOR FURTHER INFORMATION CONTACT: Lois Rossi, Registration Division 
(7505P), Office of Pesticide Programs, Environmental Protection Agency, 
1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone 
number: (703) 305-7090; email address: [email protected].

SUPPLEMENTARY INFORMATION: 

I. General Information

A. Does this action apply to me?

    You may be potentially affected by this action if you are an 
agricultural producer, food manufacturer, or pesticide manufacturer. 
Potentially affected entities may include, but are not limited to:
     Crop production (NAICS code 111).
     Animal production (NAICS code 112).
     Food manufacturing (NAICS code 311).
     Pesticide manufacturing (NAICS code 32532).
    This listing is not intended to be exhaustive, but rather provides 
a guide for readers regarding entities likely to be affected by this 
action. Other types of entities not listed in this unit could also be 
affected. The North American Industrial Classification System (NAICS) 
codes have been provided to assist you and others in determining 
whether this action might apply to certain entities. If you have any 
questions regarding the applicability of this action to a particular 
entity, consult the person listed under FOR FURTHER INFORMATION 
CONTACT.

B. How can I get electronic access to other related information?

    You may access a frequently updated electronic version of 40 CFR 
part 180 through the Government Printing Office's e-CFR site at http://ecfr.gpoaccess.gov/cgi/t/text/text-idx?&c=ecfr&tpl=/ecfrbrowse/Title40/40tab_02.tpl.

C. How can I file an objection or hearing request?

    Under FFDCA section 408(g), 21 U.S.C. 346a, any person may file an 
objection to any aspect of this regulation and may also request a 
hearing on those objections. You must file your objection or request a 
hearing on this regulation in accordance with the instructions provided 
in 40 CFR part 178. To ensure proper receipt by EPA, you must identify 
docket ID number EPA-HQ-OPP-2013-0210 in the subject line on the first 
page of your submission. All objections and requests for a hearing must 
be in writing, and must be received by the Hearing Clerk on or before 
August 11, 2014. Addresses for mail and hand delivery of objections and 
hearing requests are provided in 40 CFR 178.25(b).
    In addition to filing an objection or hearing request with the 
Hearing Clerk as described in 40 CFR part 178, please submit a copy of 
the filing that does not contain any CBI for inclusion in the public 
docket. Information not marked confidential pursuant to 40 CFR part 2 
may be disclosed publicly by EPA without prior notice. Submit a copy of 
your non-CBI objection or hearing request, identified by docket ID 
number EPA-HQ-OPP-2013-0210, by one of the following methods:
     Federal eRulemaking Portal: http://www.regulations.gov. 
Follow the on-line instructions for submitting comments.
     Mail: Office of Pesticide Programs (OPP) Regulatory Public 
Docket (7502P), Environmental Protection Agency, 1200 Pennsylvania Ave. 
NW., Washington, DC 20460-0001.
     Delivery: OPP Regulatory Public Docket (7502P), 
Environmental Protection Agency, Rm. S-4400, One Potomac Yard (South 
Bldg.), 2777 S. Crystal Dr., Arlington, VA. Deliveries are only 
accepted during the Docket Facility's normal hours of operation (8:30 
a.m. to 4 p.m., Monday through Friday, excluding legal holidays). 
Special arrangements should be made for deliveries of boxed 
information. The Docket Facility telephone number is (703) 305-5805.

II. Petition for Exemption

    In the Federal Register of August 5, 2009 (74 FR 38935) (FRL-8430-
1), EPA issued a final rule, announcing the establishment of a 
tolerance exemption pursuant to a pesticide petition (PP 9E7534) by The 
Joint Inerts Task Force (JITF), Cluster Support Team Number 1 (CST1), 
c/o CropLife America, 1156 15th St. NW., Suite 400, Washington,

[[Page 33470]]

DC 20005. The petition requested that 40 CFR 180.910, 40 CFR 180.930, 
40 CFR 180.940a, and 40 CFR 180.960 be amended by establishing 
exemptions from the requirement of a tolerance for residues of a group 
of substances known as AAAs. The exemptions narratively describe the 
subject chemical as [alpha]-alkyl-[omega]-hydroxypoly (oxypropylene) 
and/or poly (oxyethylene) polymers where the alkyl chain contains a 
minimum of six carbons and specify the individual chemicals covered by 
the exemptions by a listing of CAS Reg. Nos. The current petition seeks 
to expand these exemptions by adding an additional chemical identified 
by CAS Reg. No.
    In the Federal Register of July 19, 2013 (78 FR 43118) (FRL-9392-
9), EPA issued a notice pursuant to section 408 of FFDCA, 21 U.S.C. 
346a, announcing the filing of a pesticide petition (IN-10544) by 
Spring Trading Company, 10805 W. Timberwagon Cir., Spring, TX 77380-
4030, on behalf of Akzo Nobel Surface Chemistry, LLC, 525 West Van 
Buren, Chicago, IL 60607-3823. The petition requested that 40 CFR 
180.920, 180.930, and 180.960 be amended by modifying the exemption 
from the requirement of a tolerance for residues of AAAs by adding 
residues of additional chemicals of [alpha]-alkyl-[omega]-hydroxypoly 
(oxypropylene) and/or poly(oxyethylene) polymers where the alkyl chain 
contains a minimum of six carbons, and alkyl-w-hydroxypoly 
(oxypropylene) and/or poly (oxyethylene) polymers where the alkyl chain 
contains a minimum of six carbons, minimum number average molecular 
weight (in AMU) 1,100 in or on growing crops at no limitation when used 
as an inert ingredient in pesticide formulations. That notice 
referenced a summary of the petition prepared by Akzo Nobel Surface 
Chemistry, the petitioner, which is available in the docket, http://www.regulations.gov. Comments were received on the notice of filing. A 
public comment noted that the requested 40 CFR sections, 180.920, 
180.930, or 180.960 were not all the correct sections for AAAs. The 
petitioner agreed and resubmitted their request.
    In the Federal Register of February 25, 2014 (79 FR 03861) (FRL-
9906-77), EPA issued a notice pursuant to section 408 of FFDCA, 21 
U.S.C. 346a, announcing the filing of a pesticide petition (IN-10544) 
by Spring Trading Company, 10805 W. Timberwagon Cir., Spring, TX 77380-
4030, on behalf of Akzo Nobel Surface Chemistry, LLC, 525 West Van 
Buren, Chicago, IL 60607-3823. The petition requested that 40 CFR 
180.910, 180.930, 180.940(a) and 180.960 be amended by modifying the 
exemption from the requirement of a tolerance for residues of AAAs to 
include CAS Reg. No.: 116810-31-2 when used as an inert ingredient in 
pesticide formulations applied to growing crops without limitations. 
That notice referenced a summary of the petition prepared by Akzo Nobel 
Surface Chemistry, the petitioner, which is available in the docket, 
http://www.regulations.gov. Comments were received on the notice of 
filing. EPA's response to these comments is discussed in Unit V.C.
    In this petition, Akzo Nobel Surface Chemistry claims that the 
chemical CAS Reg. No.; 116810-31-2 is covered by the published 
tolerance exemption for AAAs and that no further data or review is 
required to amend the existing tolerance exemption to include the 
additional CAS Reg. No.
    Based upon review of the data supporting the petition, EPA has 
confirmed that the requested CAS Reg. No. is acceptable for 
consideration under the currently approved descriptor. This limitation 
is based on the Agency's risk assessment which can be found at http://www.regulations.gov in document IN-10544 requesting to amend the 
exemption from the requirement of a tolerance for [alpha]-alkyl-
[omega]-hydroxypoly (oxypropylene) and/or poly (oxyethylene) polymers 
where the alkyl chain contains a minimum of six carbons, and a-alkyl-w-
hydroxypoly (oxypropylene) and/or poly (oxyethylene) polymers where the 
alkyl chain contains a minimum of six carbons and a minimum number 
average molecular weight (in amu) 1,100, under 40 CFR 180.910, 180.930, 
180.940(a) or 180.960 in docket ID number EPA-HQ-OPP-2013-0210.

III. Inert Ingredient Definition

    Inert ingredients are all ingredients that are not active 
ingredients as defined in 40 CFR 153.125 and include, but are not 
limited to, the following types of ingredients (except when they have a 
pesticidal efficacy of their own): Solvents such as alcohols and 
hydrocarbons; surfactants such as polyoxyethylene polymers and fatty 
acids; carriers such as clay and diatomaceous earth; thickeners such as 
carrageenan and modified cellulose; wetting, spreading, and dispersing 
agents; propellants in aerosol dispensers; microencapsulating agents; 
and emulsifiers. The term ``inert'' is not intended to imply 
nontoxicity; the ingredient may or may not be chemically active. 
Generally, EPA has exempted inert ingredients from the requirement of a 
tolerance based on the low toxicity of the individual inert 
ingredients.

IV. Aggregate Risk Assessment and Determination of Safety

    Section 408(c)(2)(A)(i) of FFDCA allows EPA to establish an 
exemption from the requirement for a tolerance (the legal limit for a 
pesticide chemical residue in or on a food) only if EPA determines that 
the tolerance is ``safe.'' Section 408(b)(2)(A)(ii) of FFDCA defines 
``safe'' to mean that ``there is a reasonable certainty that no harm 
will result from aggregate exposure to the pesticide chemical residue, 
including all anticipated dietary exposures and all other exposures for 
which there is reliable information.'' This includes exposure through 
drinking water and in residential settings, but does not include 
occupational exposure. Section 408(b)(2)(C) of FFDCA requires EPA to 
give special consideration to exposure of infants and children to the 
pesticide chemical residue in establishing a tolerance and to ``ensure 
that there is a reasonable certainty that no harm will result to 
infants and children from aggregate exposure to the pesticide chemical 
residue. . . .''
    EPA establishes exemptions from the requirement of a tolerance only 
in those cases where it can be clearly demonstrated that the risks from 
aggregate exposure to pesticide chemical residues under reasonably 
foreseeable circumstances will pose no appreciable risks to human 
health. In order to determine the risks from aggregate exposure to 
pesticide inert ingredients, the Agency considers the toxicity of the 
inert in conjunction with possible exposure to residues of the inert 
ingredient through food, drinking water, and through other exposures 
that occur as a result of pesticide use in residential settings. If EPA 
is able to determine that a finite tolerance is not necessary to ensure 
that there is a reasonable certainty that no harm will result from 
aggregate exposure to the inert ingredient, an exemption from the 
requirement of a tolerance may be established.
    Consistent with section 408(c)(2)(A) of FFDCA, and the factors 
specified in FFDCA section 408(c)(2)(B), EPA has reviewed the available 
scientific data and other relevant information in support of this 
action. EPA has sufficient data to assess the hazards of and to make a 
determination on aggregate exposure for AAAs including exposure 
resulting from the exemption established by this action. EPA's 
assessment of exposures and risks associated with AAAs follows.

[[Page 33471]]

    The Agency agrees with the petitioner that CAS Reg. No.: 116810-31-
2 is an AAA having molecular structures conforming to the chemical 
description given in the tolerance exemption expression, i.e., [alpha]-
alkyl-[omega]-hydroxypoly (oxypropylene) and/or poly (oxyethylene) 
polymers where the alkyl chain contains a minimum of six carbons and 
which do not contain additional structural elements that are not 
included within the tolerance exemption expression description. In 
2009, in establishing the exemption for the AAAs, EPA assessed their 
safety generally using worst case exposure assumptions. (74 FR 149) 
(FRL-8430-1). EPA concluded that that assessment showed that exempting 
the AAAs from the requirement from a tolerance would be safe. Inclusion 
of additional chemicals described above in the risk assessment for the 
AAAs would in no way alter that prior risk assessment given the generic 
findings on toxicity and the worst case exposure assumptions used in 
that risk assessment. Accordingly, based on the findings in that 
earlier rule, EPA has determined that there is a reasonable certainty 
that no harm to any population subgroup, including infants and 
children, will result from aggregate exposure to AAAs, by including the 
additional chemicals described above, under reasonably foreseeable 
circumstances. Therefore, the amendment of an exemption from tolerance 
under 40 CFR 180.910, 180.930, 180.940, and 180.960, for residues of 
AAAs to include the chemicals described above is safe under FFDCA 
section 408.

V. Other Considerations

A. Analytical Enforcement Methodology

    An analytical method is not required for enforcement purposes since 
the Agency is establishing an exemption from the requirement of a 
tolerance without any numerical limitation.

B. International Residue Limits

    In making its tolerance decisions, EPA seeks to harmonize U.S. 
tolerances with international standards whenever possible, consistent 
with U.S. food safety standards and agricultural practices. EPA 
considers the international maximum residue limits (MRLs) established 
by the Codex Alimentarius Commission (Codex), as required by FFDCA 
section 408(b)(4). The Codex Alimentarius is a joint U.N. Food and 
Agriculture Organization/World Health Organization food standards 
program, and it is recognized as an international food safety 
standards-setting organization in trade agreements to which the United 
States is a party. EPA may establish a tolerance that is different from 
a Codex MRL; however, FFDCA section 408(b)(4) requires that EPA explain 
the reasons for departing from the Codex level.
    The Codex has not established a MRL for AAAs.

C. Response to Comments

    One comment was received for a notice of filing from a private 
citizen who opposed the authorization to sell any pesticide that leaves 
a residue on food. The Agency understands the commenter's concerns and 
recognizes that some individuals believe that no residue of pesticides 
should be allowed. However, under the existing legal framework provided 
by section 408 of the FFDCA, EPA is authorized to establish pesticide 
tolerances or exemptions where persons seeking such tolerances or 
exemptions have demonstrated that the pesticide meets the safety 
standard imposed by the statute.

VI. Conclusions

    Therefore, the exemptions from the requirement of a tolerance under 
40 CFR 180.910, 180.930, 180.940a, and 180.960 for AAAs when used as an 
inert ingredient as a surfactant in pesticide formulations applied to 
growing crops is amended to add the following CAS No.: 116810-31-2.

VII. Statutory and Executive Order Reviews

    This final rule establishes a tolerance under section 408(d) of 
FFDCA in response to a petition submitted to the Agency. The Office of 
Management and Budget (OMB) has exempted these types of actions from 
review under Executive Order 12866, entitled Regulatory Planning and 
Review (58 FR 51735, October 4, 1993). Because this final rule has been 
exempted from review under Executive Order 12866, this final rule is 
not subject to Executive Order 13211, entitled Actions Concerning 
Regulations That Significantly Affect Energy Supply, Distribution, or 
Use (66 FR 28355, May 22, 2001) or Executive Order 13045, entitled 
Protection of Children from Environmental Health Risks and Safety Risks 
(62 FR 19885, April 23, 1997). This final rule does not contain any 
information collections subject to OMB approval under the Paperwork 
Reduction Act (PRA), 44 U.S.C. 3501 et seq., nor does it require any 
special considerations under Executive Order 12898, entitled Federal 
Actions to Address Environmental Justice in Minority Populations and 
Low-Income Populations (59 FR 7629, February 16, 1994).
    Since tolerances and exemptions that are established on the basis 
of a petition under section 408(d) of FFDCA, such as the tolerance in 
this final rule, do not require the issuance of a proposed rule, the 
requirements of the Regulatory Flexibility Act (RFA) (5 U.S.C. 601 et 
seq.) do not apply.
    This final rule directly regulates growers, food processors, food 
handlers, and food retailers, not States or tribes, nor does this 
action alter the relationships or distribution of power and 
responsibilities established by Congress in the preemption provisions 
of section 408(n)(4) of FFDCA. As such, the Agency has determined that 
this action will not have a substantial direct effect on States or 
tribal governments, on the relationship between the national government 
and the States or tribal governments, or on the distribution of power 
and responsibilities among the various levels of government or between 
the Federal Government and Indian tribes. Thus, the Agency has 
determined that Executive Order 13132, entitled Federalism (64 FR 
43255, August 10, 1999) and Executive Order 13175, entitled 
Consultation and Coordination with Indian Tribal Governments (65 FR 
67249, November 9, 2000) do not apply to this final rule. In addition, 
this final rule does not impose any enforceable duty or contain any 
unfunded mandate as described under Title II of the Unfunded Mandates 
Reform Act of 1995 (UMRA) (Pub. L. 104-4).
    This action does not involve any technical standards that would 
require Agency consideration of voluntary consensus standards pursuant 
to section 12(d) of the National Technology Transfer and Advancement 
Act of 1995 (NTTAA), Public Law 104-113, section 12(d) (15 U.S.C. 272 
note).

VIII. Congressional Review Act

    The Congressional Review Act, 5 U.S.C. 801 et seq., generally 
provides that before a rule may take effect, the agency promulgating 
the rule must submit a rule report to each House of the Congress and to 
the Comptroller General of the United States. EPA will submit a report 
containing this rule and other required information to the U.S. Senate, 
the U.S. House of Representatives, and the Comptroller General of the 
United States prior to publication of this final rule in the Federal 
Register. This final rule is not a ``major rule'' as defined by 5 
U.S.C. 804(2).

[[Page 33472]]

List of Subjects in 40 CFR Part 180

    Environmental protection, Administrative practice and procedure, 
Agricultural commodities, Pesticides and pests, Reporting and 
recordkeeping requirements.

    Dated: May 29, 2014.
Lois Rossi,
Director, Registration Division, Office of Pesticide Programs.
    Therefore, 40 CFR chapter I is amended as follows:

PART 180--[AMENDED]

0
1. The authority citation for part 180 continues to read as follows:

    Authority:  21 U.S.C. 321(q), 346a and 371.


0
2. In Sec.  180.910, the table is amended by revising the following 
inert ingredients to read as follows:


Sec.  180.910  Inert ingredients used pre- and post-harvest; exemptions 
from the requirement of a tolerance.

* * * * *

----------------------------------------------------------------------------------------------------------------
                  Inert ingredients                       Limits                        Uses
----------------------------------------------------------------------------------------------------------------
 
                                                  * * * * * * *
[alpha]-alkyl-[omega]-hydroxypoly (oxypropylene) and/  ...........  Surfactants, related adjuvants of
 or poly (oxyethylene) polymers where the alkyl chain               surfactants.
 contains a minimum of six carbons (CAS Reg. No.:
 9002-92-0; 9004-95-9; 9004-98-2; 9005-00-9; 9035-85-
 2; 9038-29-3; 9038-43-1; 9040-05-5; 9043-30-5; 9087-
 53-0; 25190-05-0; 24938-91-8; 25231-21-4; 26183-52-
 8; 26468-86-0; 26636-39-5; 27252-75-1; 27306-79-2;
 31726-34-8; 34398-01-1; 34398-05-5; 37251-67-5;
 37311-00-5; 37311-01-6; 37311-02-7; 37311-04-9;
 39587-22-9; 50861-66-0; 52232-09-4; 52292-17-8;
 52609-19-5; 57679-21-7; 59112-62-8; 60828-78-6;
 61702-78-1; 61725-89-1; 61791-13-7; 61791-20-6;
 61791-28-4; 61804-34-0; 61827-42-7; 61827-84-7;
 62648-50-4; 63303-01-5; 63658-45-7; 63793-60-2;
 64366-70-7; 64415-24-3; 64415-25-4; 64425-86-1;
 65104-72-5; 65150-81-4; 66455-14-9: 66455-15-0;
 67254-71-1; 67763-08-0; 68002-96-0; 68002-97-1;
 68131-39-5; 68131-40-8; 68154-96-1; 68154-97-2;
 68154-98-3; 68155-01-1; 68213-23-0; 68213-24-1;
 68238-81-3; 68238-82-4; 68409-58-5; 68409-59-6;
 68439-30-5; 68439-45-2; 68439-46-3; 68439-48-5;
 68439-49-6; 68439-50-9; 68439-51-0; 68439-53-2;
 68439-54-3; 68458-88-8; 68526-94-3; 68526-95-4;
 68551-12-2; 68551-13-3; 68551-14-4; 68603-20-3;
 68603-25-8; 68920-66-1; 68920-69-4; 68937-66-6;
 68951-67-7; 68954-94-9; 68987-81-5; 68991-48-0;
 69011-36-5; 69013-18-9; 69013-19-0; 69227-20-9;
 69227-21-0; 69227-22-1; 69364-63-2; 70750-27-5;
 70879-83-3; 70955-07-6; 71011-10-4; 71060-57-6;
 71243-46-4; 72066-65-0; 72108-90-8; 72484-69-6;
 72854-13-8; 72905-87-4; 73018-31-2; 73049-34-0;
 74432-13-6; 74499-34-6; 78330-19-5; 78330-20-8;
 78330-21-9; 78330-23-1; 79771-03-2; 84133-50-6;
 85422-93-1; 97043-91-9; 97953-22-5; 102782-43-4;
 103331-86-8; 103657-84-7; 103657-85-8; 103818-93-5;
 103819-03-0; 106232-83-1; 111905-54-5; 116810-31-2;
 116810-32-3; 116810-33-4; 120313-48-6; 120944-68-5;
 121617-09-2; 126646-02-4; 126950-62-7; 127036-24-2;
 139626-71-4; 152231-44-2; 154518-36-2; 157627-86-6;
 157627-88-8; 157707-41-0; 157707-43-2; 159653-49-3;
 160875-66-1; 160901-20-2; 160901-09-7; 160901-19-9;
 161025-21-4; 161025-22-5; 166736-08-9; 169107-21-5;
 172588-43-1; 176022-76-7; 196823-11-7; 287935-46-0;
 288260-45-7; 303176-75-2; 954108-36-2).
 
                                                  * * * * * * *
----------------------------------------------------------------------------------------------------------------


0
3. In Sec.  180.930, the table is amended by revising the following 
inert ingredients to read as follows:


Sec.  180.930  Inert ingredients applied to animals; exemptions from 
the requirement of a tolerance.

* * * * *

[[Page 33473]]



----------------------------------------------------------------------------------------------------------------
                  Inert ingredients                       Limits                        Uses
----------------------------------------------------------------------------------------------------------------
 
                                                  * * * * * * *
[alpha]-alkyl-[omega]-hydroxypoly (oxypropylene) and/  ...........  Surfactants, related adjuvants of
 or poly (oxyethylene) polymers where the alkyl chain                surfactants.
 contains a minimum of six carbons (CAS Reg. No.:
 9002-92-0; 9004-95-9; 9004-98-2; 9005-00-9; 9035-85-
 2; 9038-29-3; 9038-43-1; 9040-05-5; 9043-30-5; 9087-
 53-0; 25190-05-0; 24938-91-8; 25231-21-4; 26183-52-
 8; 26468-86-0; 26636-39-5; 27252-75-1; 27306-79-2;
 31726-34-8; 34398-01-1; 34398-05-5; 37251-67-5;
 37311-00-5; 37311-01-6; 37311-02-7; 37311-04-9;
 39587-22-9; 50861-66-0; 52232-09-4; 52292-17-8;
 52609-19-5; 57679-21-7; 59112-62-8; 60828-78-6;
 61702-78-1; 61725-89-1; 61791-13-7; 61791-20-6;
 61791-28-4; 61804-34-0; 61827-42-7; 61827-84-7;
 62648-50-4; 63303-01-5; 63658-45-7; 63793-60-2;
 64366-70-7; 64415-24-3; 64415-25-4; 64425-86-1;
 65104-72-5; 65150-81-4; 66455-14-9: 66455-15-0;
 67254-71-1; 67763-08-0; 68002-96-0; 68002-97-1;
 68131-39-5; 68131-40-8; 68154-96-1; 68154-97-2;
 68154-98-3; 68155-01-1; 68213-23-0; 68213-24-1;
 68238-81-3; 68238-82-4; 68409-58-5; 68409-59-6;
 68439-30-5; 68439-45-2; 68439-46-3; 68439-48-5;
 68439-49-6; 68439-50-9; 68439-51-0; 68439-53-2;
 68439-54-3; 68458-88-8; 68526-94-3; 68526-95-4;
 68551-12-2; 68551-13-3; 68551-14-4; 68603-20-3;
 68603-25-8; 68920-66-1; 68920-69-4; 68937-66-6;
 68951-67-7; 68954-94-9; 68987-81-5; 68991-48-0;
 69011-36-5; 69013-18-9; 69013-19-0; 69227-20-9;
 69227-21-0; 69227-22-1; 69364-63-2; 70750-27-5;
 70879-83-3; 70955-07-6; 71011-10-4; 71060-57-6;
 71243-46-4; 72066-65-0; 72108-90-8; 72484-69-6;
 72854-13-8; 72905-87-4; 73018-31-2; 73049-34-0;
 74432-13-6; 74499-34-6; 78330-19-5; 78330-20-8;
 78330-21-9; 78330-23-1; 79771-03-2; 84133-50-6;
 85422-93-1; 97043-91-9; 97953-22-5; 102782-43-4;
 103331-86-8; 103657-84-7; 103657-85-8; 103818-93-5;
 103819-03-0; 106232-83-1; 111905-54-5; 116810-31-2;
 116810-32-3; 116810-33-4; 120313-48-6; 120944-68-5;
 121617-09-2; 126646-02-4; 126950-62-7; 127036-24-2;
 139626-71-4; 152231-44-2; 154518-36-2; 157627-86-6;
 157627-88-8; 157707-41-0; 157707-43-2; 159653-49-3;
 160875-66-1; 160901-20-2; 160901-09-7; 160901-19-9;
 161025-21-4; 161025-22-5; 166736-08-9; 169107-21-5;
 172588-43-1; 176022-76-7; 196823-11-7; 287935-46-0;
 288260-45-7; 303176-75-2; 954108-36-2).
 
                                                  * * * * * * *
----------------------------------------------------------------------------------------------------------------


0
4. In Sec.  180.940, the table is amended by revising the following 
entry to the table in paragraph (a):


Sec.  180.940  Tolerance exemptions for active and inert ingredients 
for use in antimicrobial formulations (Food-contact surface sanitizing 
solutions).

* * * * *
    (a) * * *

----------------------------------------------------------------------------------------------------------------
         Pesticide chemical                                CAS Reg. No.                              Limits
----------------------------------------------------------------------------------------------------------------
 
                                                  * * * * * * *
[alpha]-alkyl-[omega]-hydroxypoly    9002-92-0; 9004-95-9; 9004-98-2; 9005-00-9; 9035-85-2;    .................
 (oxypropylene) and/or poly           9038-29-3; 9038-43-1; 9040-05-5; 9043-30-5; 9087-53-0;
 (oxyethylene) polymers where the     25190-05-0; 24938-91-8; 25231-21-4; 26183-52-8; 26468-
 alkyl chain contains a minimum of    86-0; 26636-39-5; 27252-75-1; 27306-79-2; 31726-34-8;
 six carbons.                         34398-01-1; 34398-05-5; 37251-67-5; 37311-00-5; 37311-
                                      01-6; 37311-02-7; 37311-04-9; 39587-22-9; 50861-66-0;
                                      52232-09-4; 52292-17-8; 52609-19-5; 57679-21-7; 59112-
                                      62-8; 60828-78-6; 61702-78-1; 61725-89-1; 61791-13-7;
                                      61791-20-6; 61791-28-4; 61804-34-0; 61827-42-7; 61827-
                                      84-7; 62648-50-4; 63303-01-5; 63658-45-7; 63793-60-2;
                                      64366-70-7; 64415-24-3; 64415-25-4; 64425-86-1; 65104-
                                      72-5; 65150-81-4; 66455-14-9: 66455-15-0; 67254-71-1;
                                      67763-08-0; 68002-96-0; 68002-97-1; 68131-39-5; 68131-
                                      40-8; 68154-96-1; 68154-97-2; 68154-98-3; 68155-01-1;
                                      68213-23-0; 68213-24-1; 68238-81-3; 68238-82-4; 68409-
                                      58-5; 68409-59-6; 68439-30-5; 68439-45-2; 68439-46-3;
                                      68439-48-5; 68439-49-6; 68439-50-9; 68439-51-0; 68439-
                                      53-2; 68439-54-3; 68458-88-8; 68526-94-3; 68526-95-4;
                                      68551-12-2; 68551-13-3; 68551-14-4; 68603-20-3; 68603-
                                      25-8; 68920-66-1; 68920-69-4; 68937-66-6; 68951-67-7;
                                      68954-94-9; 68987-81-5; 68991-48-0; 69011-36-5; 69013-
                                      18-9; 69013-19-0; 69227-20-9; 69227-21-0; 69227-22-1;
                                      69364-63-2; 70750-27-5; 70879-83-3; 70955-07-6; 71011-
                                      10-4; 71060-57-6; 71243-46-4; 72066-65-0; 72108-90-8;
                                      72484-69-6; 72854-13-8; 72905-87-4; 73018-31-2; 73049-
                                      34-0; 74432-13-6; 74499-34-6; 78330-19-5; 78330-20-8;
                                      78330-21-9; 78330-23-1; 79771-03-2; 84133-50-6; 85422-
                                      93-1; 97043-91-9; 97953-22-5; 102782-43-4; 103331-86-8;
                                      103657-84-7; 103657-85-8; 103818-93-5; 103819-03-0;
                                      106232-83-1; 111905-54-5; 116810-31-2; 116810-32-3;
                                      116810-33-4; 120313-48-6; 120944-68-5; 121617-09-2;
                                      126646-02-4; 126950-62-7; 127036-24-2; 139626-71-4;
                                      152231-44-2; 154518-36-2; 157627-86-6; 157627-88-8;
                                      157707-41-0; 157707-43-2; 159653-49-3; 160875-66-1;
                                      160901-20-2; 160901-09-7; 160901-19-9; 161025-21-4;
                                      161025-22-5; 166736-08-9; 169107-21-5; 172588-43-1;
                                      176022-76-7; 196823-11-7; 287935-46-0; 288260-45-7;
                                      303176-75-2; 954108-36-2.
 

[[Page 33474]]

 
                                                  * * * * * * *
----------------------------------------------------------------------------------------------------------------


0
5. In Sec.  180.960, the table is amended by revising the following 
entry to read as follows:


Sec.  180.960  Polymers; exemptions from the requirement of a 
tolerance.

* * * * *

----------------------------------------------------------------------------------------------------------------
                   Polymer                                               CAS Reg. No.
----------------------------------------------------------------------------------------------------------------
 
                                                  * * * * * * *
[alpha]-alkyl-[omega]-hydroxypoly             9002-92-0; 9004-95-9; 9004-98-2; 9005-00-9; 9035-85-2; 9038-29-3;
 (oxypropylene) and/or poly (oxyethylene)      9038-43-1; 9040-05-5; 9043-30-5; 9087-53-0; 25190-05-0; 24938-91-
 polymers where the alkyl chain contains a     8; 25231-21-4; 26183-52-8; 26468-86-0; 26636-39-5; 27252-75-1;
 minimum of six carbons and a minimum number   27306-79-2; 31726-34-8; 34398-01-1; 34398-05-5; 37251-67-5; 37311-
 average molecular weight (in amu) 1,100.      00-5; 37311-01-6; 37311-02-7; 37311-04-9; 39587-22-9; 50861-66-0;
                                               52232-09-4; 52292-17-8; 52609-19-5; 57679-21-7; 59112-62-8; 60828-
                                               78-6; 61702-78-1; 61725-89-1; 61791-13-7; 61791-20-6; 61791-28-4;
                                               61804-34-0; 61827-42-7; 61827-84-7; 62648-50-4; 63303-01-5; 63658-
                                               45-7; 63793-60-2; 64366-70-7; 64415-24-3; 64415-25-4; 64425-86-1;
                                               65104-72-5; 65150-81-4; 66455-14-9: 66455-15-0; 67254-71-1; 67763-
                                               08-0; 68002-96-0; 68002-97-1; 68131-39-5; 68131-40-8; 68154-96-1;
                                               68154-97-2; 68154-98-3; 68155-01-1; 68213-23-0; 68213-24-1; 68238-
                                               81-3; 68238-82-4; 68409-58-5; 68409-59-6; 68439-30-5; 68439-45-2;
                                               68439-46-3; 68439-48-5; 68439-49-6; 68439-50-9; 68439-51-0; 68439-
                                               53-2; 68439-54-3; 68458-88-8; 68526-94-3; 68526-95-4; 68551-12-2;
                                               68551-13-3; 68551-14-4; 68603-20-3; 68603-25-8; 68920-66-1; 68920-
                                               69-4; 68937-66-6; 68951-67-7; 68954-94-9; 68987-81-5; 68991-48-0;
                                               69011-36-5; 69013-18-9; 69013-19-0; 69227-20-9; 69227-21-0; 69227-
                                               22-1; 69364-63-2; 70750-27-5; 70879-83-3; 70955-07-6; 71011-10-4;
                                               71060-57-6; 71243-46-4; 72066-65-0; 72108-90-8; 72484-69-6; 72854-
                                               13-8; 72905-87-4; 73018-31-2; 73049-34-0; 74432-13-6; 74499-34-6;
                                               78330-19-5; 78330-20-8; 78330-21-9; 78330-23-1; 79771-03-2; 84133-
                                               50-6; 85422-93-1; 97043-91-9; 97953-22-5; 102782-43-4; 103331-86-
                                               8; 103657-84-7; 103657-85-8; 103818-93-5; 103819-03-0; 106232-83-
                                               1; 111905-54-5; 116810-31-2; 116810-32-3; 116810-33-4; 120313-48-
                                               6; 120944-68-5; 121617-09-2; 126646-02-4; 126950-62-7; 127036-24-
                                               2; 139626-71-4; 152231-44-2; 154518-36-2; 157627-86-6; 157627-88-
                                               8; 157707-41-0; 157707-43-2; 159653-49-3; 160875-66-1; 160901-20-
                                               2; 160901-09-7; 160901-19-9; 161025-21-4; 161025-22-5; 166736-08-
                                               9; 169107-21-5; 172588-43-1; 176022-76-7; 196823-11-7; 287935-46-
                                               0; 288260-45-7; 303176-75-2; 954108-36-2
 
                                                  * * * * * * *
----------------------------------------------------------------------------------------------------------------

[FR Doc. 2014-13383 Filed 6-10-14; 8:45 am]
BILLING CODE 6560-50-P