[Federal Register Volume 77, Number 173 (Thursday, September 6, 2012)]
[Notices]
[Page 54935]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2012-21913]


-----------------------------------------------------------------------

NATIONAL AERONAUTICS AND SPACE ADMINISTRATION

[Notice (12-063)]


Government-Owned Inventions, Available for Licensing

AGENCY: National Aeronautics and Space Administration.

ACTION: Notice of availability of inventions for licensing.

-----------------------------------------------------------------------

SUMMARY: Patent applications on the inventions listed below assigned to 
the National Aeronautics and Space Administration, have been filed in 
the United States Patent and Trademark Office, and are available for 
licensing.

DATES: September 6, 2012.

FOR FURTHER INFORMATION CONTACT: Kaprice L. Harris, Attorney Advisor, 
Glenn Research Center at Lewis Field, Code 500-118, Cleveland, OH 
44135; telephone (216) 433-5754; fax (216) 433-6790.
NASA Case No.: LEW-18340-2: Offset Compound Gear Inline Two Speed 
Drive;
NASA Case No.: LEW-18313-2: Chalcogenide Nanoionic-Based Radio 
Frequency Switch;
NASA Case No.: LEW-18601-1: Inductive Power Device;
NASA Case No.: LEW-18566-1: Low Density, High Creep Resistant Single 
Crystal Superalloy with Lower Manufacturing Cost;
NASA Case No.: LEW-18362-2: Space Radiation Detector with Spherical 
Geometry;
NASA Case No.: LEW-18771-1: Integrated Temperature and Capacitive 
Ablation Recession Rate Sensors;
NASA Case No.: LEW-18473-1: Ka-Band Waveguide 2-Way Hybrid Combiner for 
MMIC Amplifiers with Unequal and Arbitrary Power Output Ratio;
NASA Case No.: LEW-18254-2: Simultaneous Non-Contact Precision Imaging 
of Microstructural and Thickness Variation in Dielectric Materials 
Using Terahertz Energy;
NASA Case No.: LEW-18724-1: Vessel Generation Analysis;
NASA Case No.: LEW-18639-1: Atomic Oxygen Fluence Monitor;
NASA Case No.: LEW-18042-2: Process for Preparing Polymer Reinforced 
Silica Aerogels;
NASA Case No.: LEW-18076-2: Dust Removal from Solar Cells;
NASA Case No.: LEW-18236-2: Polyimides Derived From Novel Asymmetric 
Benzophenone Dianhydrides;
NASA Case No.: LEW-17877-2: Antenna Near-Field Probe Station Scanner;
NASA Case No.: LEW-18631-1: Circuit for Communication Over Power Lines;
NASA Case No.: LEW-18608-1: Method for Making Fuel Cell;
NASA Case No.: LEW-18483-1: Interference-Free Optical Detection for 
Raman Spectroscopy;
NASA Case No.: LEW-18714-1: High Strength Nanocomposite Glass Fibers;
NASA Case No.: LEW-18605-1: Electric Propulsion Apparatus;
NASA Case No.: LEW-18762-1: Selenium Interlayer for High-efficiency 
Multijunction Solar Cell;
NASA Case No.: LEW-18426-1: Dual-Mode Combustor;
NASA Case No.: LEW-18615-1: Purify Nanomaterials;
NASA Case No.: LEW-18632-1: Method for Fabricating Diamond-Dispersed 
Fiber-Reinforced Composite Coating On Low Temperature Sliding Thrust 
Bearing Interfaces;
NASA Case No.: LEW-18492-1: Synthesis Methods, Microscopy 
Characterization and Device Integration of Nanoscale Metal Oxide 
Semiconductors for Gas Sensing in Aerospace Applications;
NASA Case No.: LEW-18636-1: N Channel JFET Based Digital Logic Gate 
Structure;
NASA Case No.: LEW-18634-1: Multi-Parameter Scattering Sensor and 
Methods;
NASA Case No.: LEW-18586-1: Shock Sensing Apparatus;
NASA Case No.: LEW-18221-2: Method and Apparatus for Thermal Spraying 
of Metal Coatings Using Pulsejet Resonant Pulsed Combustion;
NASA Case No.: LEW-18619-1: Method to Transmit and Receive Video on 
Preexisting Wiring in Fixed and Mobile Structures;
NASA Case No.: LEW-17458-2: Compact Solid State Entangled Photon 
Source;
NASA Case No.: LEW-17634-2: Method for Making a Fuel Cell;
NASA Case No.: LEW-18649-1: Ultracapacitor Based Uninterruptible Power 
Supply (UPS) System;
NASA Case No.: LEW-18648-1: Epoxy-clay Nanocomposites;
NASA Case No.: LEW-18594-1: Thermomechanical Methodology for 
Stabilizing Shape Memory Alloy (SMA) Response;
NASA Case No.: LEW-18717-1: A High-Efficiency Power Module;
NASA Case No.: LEW-18785-1: Prestressing Shock Resistant Mechanical 
Components and Mechanisms Made From Hard, Superelastic Materials;
NASA Case No.: LEW-18432-2: Method for Providing Semiconductors Having 
Self-Aligned Ion Implant;
NASA Case No.: LEW-18604-1: Mechanical Components From Highly 
Recoverable Low Apparent Modulus Materials;
NASA Case No.: LEW-18614-1: High-Temperature Thermometer Using Cr-Doped 
GdAlO3 Broadband Luminescence;
NASA Case No.: LEW-18761-1: Surface Temperature Measurement Using 
Hematite Coating;
NASA Case No.: LEW-18296-1: Modular Battery Controller;
NASA Case No.: LEW-18658-1: Levitating Electromagnetic Generator and 
Method of Using the Same;
NASA Case No.: LEW-18248-1: Cellular Reflectarray Antenna and Method of 
Making Same;
NASA Case No.: LEW-17916-2: Carbon Dioxide Gas Sensors and Method of 
Manufacturing and Using Same;
NASA Case No.: LEW-18542-1: Functionalization of Single Wall Carbon 
Nanotubes (SWCNTs) by Photooxidation;
NASA Case No.: 18477-1: Graphene Based Reversible Nano-Switch/Sensor 
Schottky Diode (nanoSSSD) Device.

Sumara M. Thompson-King,
Acting Deputy General Counsel.
[FR Doc. 2012-21913 Filed 9-5-12; 8:45 am]
BILLING CODE P