[Federal Register Volume 77, Number 168 (Wednesday, August 29, 2012)]
[Notices]
[Pages 52325-52328]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2012-20877]



[[Page 52325]]

-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2012-0613; FRL-9360-1]


Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Toxic Substances Control Act (TSCA) requires any person 
who intends to manufacture (defined by statute to include import) a new 
chemical (i.e., a chemical not on the TSCA Chemical Substances 
Inventory (TSCA Inventory)) to notify EPA and comply with the statutory 
provisions pertaining to the manufacture of new chemicals. In addition 
under TSCA, EPA is required to publish in the Federal Register a notice 
of receipt of a premanufacture notice (PMN) or an application for a 
test marketing exemption (TME), and to publish in the Federal Register 
periodic status reports on the new chemicals under review and the 
receipt of notices of commencement (NOC) to manufacture those 
chemicals. This document, which covers the period from July 23, 2012 to 
August 03, 2012, and provides the required notice and status report, 
consists of the PMNs and TMEs, both pending or expired, and the NOC to 
manufacture a new chemical that the Agency has received under TSCA 
section 5 during this time period.

DATES: Comments identified by the specific PMN number or TME number, 
must be received on or before September 28, 2012.

ADDRESSES: Submit your comments, identified by docket identification 
(ID) number EPA-HQ-OPPT-2012-0613, and the specific PMN number or TME 
number for the chemical related to your comment, by one of the 
following methods:
     Federal eRulemaking Portal: http://www.regulations.gov. 
Follow the on-line instructions for submitting comments.
     Mail: Document Control Office (7407M), Office of Pollution 
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 
Pennsylvania Ave. NW., Washington, DC 20460-0001.
     Hand Delivery: OPPT Document Control Office (DCO), EPA 
East Bldg., Rm. 6428, 1201 Constitution Ave. NW., Washington, DC. The 
DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding 
legal holidays. The telephone number for the DCO is (202) 564-8930. 
Such deliveries are only accepted during the DCO's normal hours of 
operation, and special arrangements should be made for deliveries of 
boxed information.
    Instructions: EPA's policy is that all comments received will be 
included in the docket without change and may be made available on-line 
at http://www.regulations.gov, including any personal information 
provided, unless the comment includes information claimed to be 
Confidential Business Information (CBI) or other information whose 
disclosure is restricted by statute. Do not submit information that you 
consider to be CBI or otherwise protected through regulations.gov or 
email. The regulations.gov Web site is an ``anonymous access'' system, 
which means EPA will not know your identity or contact information 
unless you provide it in the body of your comment. If you send an email 
comment directly to EPA without going through regulations.gov, your 
email address will be automatically captured and included as part of 
the comment that is placed in the docket and made available on the 
Internet. If you submit an electronic comment, EPA recommends that you 
include your name and other contact information in the body of your 
comment and with any disk or CD-ROM you submit. If EPA cannot read your 
comment due to technical difficulties and cannot contact you for 
clarification, EPA may not be able to consider your comment. Electronic 
files should avoid the use of special characters, any form of 
encryption, and be free of any defects or viruses.
    Docket: All documents in the docket are listed in the docket index 
available at http://www.regulations.gov. Although listed in the index, 
some information is not publicly available, e.g., CBI or other 
information whose disclosure is restricted by statute. Certain other 
material, such as copyrighted material, will be publicly available only 
in hard copy. Publicly available docket materials are available 
electronically at http://www.regulations.gov, or, if only available in 
hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA 
Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution 
Ave. NW., Washington, DC. The EPA/DC Public Reading Room hours of 
operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding 
legal holidays. The telephone number of the EPA/DC Public Reading Room 
is (202) 566-1744, and the telephone number for the OPPT Docket is 
(202) 566-0280. Docket visitors are required to show photographic 
identification, pass through a metal detector, and sign the EPA visitor 
log. All visitor bags are processed through an X-ray machine and 
subject to search. Visitors will be provided an EPA/DC badge that must 
be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT:
    For technical information contact: Bernice Mudd, Information 
Management Division (7407M), Office of Pollution Prevention and Toxics, 
Environmental Protection Agency, 1200 Pennsylvania Ave. NW., 
Washington, DC 20460-0001; telephone number: (202) 564-8951; fax 
number: (202) 564-8955; email address: [email protected].
    For general information contact: The TSCA-Hotline, ABVI-Goodwill, 
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 
554-1404; email address: [email protected].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this action apply to me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitter of the PMNs addressed in this action.

B. What should I consider as I prepare my comments for EPA?

    1. Submitting CBI. Do not submit this information to EPA through 
regulations.gov or email. Clearly mark the part or all of the 
information that you claim to be CBI. For CBI information in a disk or 
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as 
CBI and then identify electronically within the disk or CD-ROM the 
specific information that is claimed as CBI. In addition to one 
complete version of the comment that includes information claimed as 
CBI, a copy of the comment that does not contain the information 
claimed as CBI must be submitted for inclusion in the public docket. 
Information so marked will not be disclosed except in accordance with 
procedures set forth in 40 CFR part 2.
    2. Tips for preparing your comments. When submitting comments, 
remember to:
    i. Identify the document by docket ID number and other identifying 
information (subject heading, Federal Register date and page number).
    ii. Follow directions. The Agency may ask you to respond to 
specific questions or organize comments by referencing a Code of 
Federal Regulations (CFR) part or section number.
    iii. Explain why you agree or disagree; suggest alternatives and 
substitute language for your requested changes.

[[Page 52326]]

    iv. Describe any assumptions and provide any technical information 
and/or data that you used.
    v. If you estimate potential costs or burdens, explain how you 
arrived at your estimate in sufficient detail to allow for it to be 
reproduced.
    vi. Provide specific examples to illustrate your concerns and 
suggest alternatives.
    vii. Explain your views as clearly as possible, avoiding the use of 
profanity or personal threats.
    viii. Make sure to submit your comments by the comment period 
deadline identified.

II. Why is EPA taking this action?

    EPA classifies a chemical substance as either an ``existing'' 
chemical or a ``new'' chemical. Any chemical substance that is not on 
EPA's TSCA Inventory is classified as a ``new chemical,'' while those 
that are on the TSCA Inventory are classified as an ``existing 
chemical.'' For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to 
manufacture or import a new chemical substance for a non-exempt 
commercial purpose is required by TSCA section 5 to provide EPA with a 
PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes 
EPA to allow persons, upon application, to manufacture (includes 
import) or process a new chemical substance, or a chemical substance 
subject to a significant new use rule (SNUR) issued under TSCA section 
5(a), for ``test marketing'' purposes, which is referred to as a test 
marketing exemption, or TME. For more information about the 
requirements applicable to a new chemical go to: http://ww.epa.gov/opt/newchems.
    Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish 
in the Federal Register a notice of receipt of a PMN or an application 
for a TME and to publish in the Federal Register periodic status 
reports on the new chemicals under review and the receipt of NOCs to 
manufacture those chemicals. This status report, which covers the 
period from July 23, 2012 to August 03, 2012, consists of the PMNs 
pending or expired, and the NOCs to manufacture a new chemical that the 
Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Reports

    In Table I. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the PMNs 
received by EPA during this period: The EPA case number assigned to the 
PMN, the date the PMN was received by EPA, the projected end date for 
EPA's review of the PMN, the submitting manufacturer/importer, the 
potential uses identified by the manufacturer/importer in the PMN, and 
the chemical identity.

                               Table I--17 PMNs Received From 07/23/12 to 08/03/12
----------------------------------------------------------------------------------------------------------------
                                                Projected
           Case No.               Received     notice end     Manufacturer/          Use            Chemical
                                    date          date          importer
----------------------------------------------------------------------------------------------------------------
P-12-0473.....................    07/23/2012    10/20/2012  Takasago          (S) Ingredient    (S) Phenol 4-
                                                             International     in a fragrance    (ethoxymethyl)-
                                                             Corporation       compound.         2-methoxy-l.
                                                             U.S.A.
P-12-0474.....................    07/23/2012    10/20/2012  CBI.............  (S) Aliphatic     (G) Ultra violet
                                                                               multifunctional   curable
                                                                               urethane          acrylate.
                                                                               acrylate for
                                                                               use in wood
                                                                               stains, primers
                                                                               and coatings.
P-12-0475.....................    07/24/2012    10/21/2012  Mane, U.S.A.....  (S) Fragrance     (S) Butanoic
                                                                               ingredient.       acid, 2-methyl-
                                                                                                 5-(1-
                                                                                                 methylethyl)
                                                                                                 cyclopentyl
                                                                                                 ester.
P-12-0476.....................    07/25/2012    10/22/2012  Infigreen         (S) Polyol for    (G) Aromatic
                                                             Polymers.         use in            polyester
                                                                               manufacturing     polyether
                                                                               of polyurethane   polyol.
                                                                               foam.
P-12-0477.....................    07/27/2012    10/24/2012  International     (S) Scale         (S) Phosphonic
                                                             Specialty         inhibitor.        acid, [[(2-
                                                             Products.                           hydroxyethyl)im
                                                                                                 ino]bis(methyle
                                                                                                 ne)]bis-,
                                                                                                 monosodium salt
                                                                                                 (9ci) .
P-12-0478.....................    07/27/2012    10/24/2012  CBI.............  (G) Coatings....  (G) Amine salted
                                                                                                 polyurethane.
P-12-0480.....................    07/30/2012    10/27/2012  CBI.............  (S) Monomer for   (G) Alkyl
                                                                               specialty         maleimide
                                                                               polymer.          substituted
                                                                                                 bicyclic
                                                                                                 olefin.
P-12-0481.....................    07/30/2012    10/27/2012  CBI.............  (G) Polymer       (G) Alkylated
                                                                               manufacture for   aromatic
                                                                               electronic        diamine.
                                                                               applications.
P-12-0482.....................    07/31/2012    10/28/2012  Honda of America  (S) Fertilizer    (S) Flue dust,
                                                             Mfg., Inc.        component to      automotive
                                                                               achieve desired   metal recovery.
                                                                               zinc content.
P-12-0483.....................    08/01/2012    10/29/2012  CBI.............  (G) Coating       (G) Siloxanes
                                                                               additive.         and silicones,
                                                                                                 substituted
                                                                                                 alkyl group-
                                                                                                 terminated,
                                                                                                 ethoxylated,
                                                                                                 polymers with 5-
                                                                                                 isocyanato-1-
                                                                                                 (isocyanatometh
                                                                                                 yl)-, 1,3,3-
                                                                                                 trimethylcycloh
                                                                                                 exane and N-
                                                                                                 alkyl glycol,
                                                                                                 hydroxyethyl
                                                                                                 methacrylate-
                                                                                                 blocked.
P-12-0484.....................    08/01/2012    10/29/2012  Bio100            (S) Polyol for    (G) Polyester
                                                             Technologies,     polyurethane      polyol based
                                                             LLC.              foam; polyol      upon glycerin.
                                                                               for
                                                                               polyurethane
                                                                               adhesives.

[[Page 52327]]

 
P-12-0485.....................    08/01/2012    10/29/2012  CBI.............  (G) Additive to   (G) Oxirane,
                                                                               polyurethane      alkyl, polymer
                                                                               foam.             with aromatic
                                                                                                 isocyanate,
                                                                                                 alkyloxirane
                                                                                                 polymer with
                                                                                                 oxirane ether
                                                                                                 with
                                                                                                 alkyltriol, and
                                                                                                 oxirane,
                                                                                                 polyethylene
                                                                                                 glycol
                                                                                                 mono(alkylaroma
                                                                                                 tic) ether-
                                                                                                 blocked.
P-12-0486.....................    08/01/2012    10/29/2012  CBI.............  (G) Additive to   (G) 2-
                                                                               polyurethane      alkylacohol,
                                                                               foam.             1,1'',1''',1'''
                                                                                                 '
                                                                                                 -(-
                                                                                                 alkanediyldinit
                                                                                                 rilo) tetrakis-
                                                                                                 , polymer with
                                                                                                 aromatic
                                                                                                 isocyanate,
                                                                                                 alkyloxirane,
                                                                                                 alkyloxirane
                                                                                                 polymer with
                                                                                                 oxirane ether
                                                                                                 with aliphatic
                                                                                                 triol (3:1),
                                                                                                 and oxirane,
                                                                                                 polyalkylene
                                                                                                 glycol
                                                                                                 mono(branched
                                                                                                 alkylaromatic)
                                                                                                 ether-blocked.
P-12-0487.....................    08/01/2012    10/29/2012  CBI.............  (G) Additive to   (G) Alkanol,
                                                                               polyurethane      oxybis-,
                                                                               foam.             polymer with
                                                                                                 aromatic,
                                                                                                 isocyanate-
                                                                                                 terminated,
                                                                                                 polymers with
                                                                                                 alkylene oxide,
                                                                                                 aromatic
                                                                                                 isocyanate,
                                                                                                 alkylene glycol
                                                                                                 ether with
                                                                                                 alkyltrioll
                                                                                                 (3:1),
                                                                                                 polyalkylene
                                                                                                 glycol and
                                                                                                 alkylene oxide,
                                                                                                 polyethylene
                                                                                                 glycol mono
                                                                                                 (alkylaromatic)
                                                                                                 ether.
P-12-0488.....................    08/01/2012    10/29/2012  CBI.............  (G) Additive to   (G) Hydroxyl
                                                                               polyurethane      containing oil,
                                                                               foam.             polymer with
                                                                                                 aromatic
                                                                                                 isocyanate,
                                                                                                 polyalkylene-
                                                                                                 polyalkylene
                                                                                                 glycol ether
                                                                                                 with dialkylene
                                                                                                 glycol (2:1)
                                                                                                 and
                                                                                                 polyalkylene-
                                                                                                 polyalkylene
                                                                                                 glycol ether
                                                                                                 with aliphatic
                                                                                                 triol (3:1),
                                                                                                 polyalkylene
                                                                                                 glycol mono
                                                                                                 (branched
                                                                                                 alkylaromatic)
                                                                                                 ether-blocked.
P-12-0489.....................    08/01/2012    10/29/2012  CBI.............  (G) Additive to   (G) Hydroxy
                                                                               polyurethane      containing oil,
                                                                               foam.             polymer with
                                                                                                 alkylene oxide,
                                                                                                 aromatic
                                                                                                 isocyanate, and
                                                                                                 polyalkylene-
                                                                                                 polyalkylene
                                                                                                 glycol ether
                                                                                                 with aliphatic
                                                                                                 triol (3:1),
                                                                                                 and alkylene
                                                                                                 oxide,
                                                                                                 polyalkylene
                                                                                                 glycol mono
                                                                                                 (branched
                                                                                                 alkylaromatic)
                                                                                                 ether-blocked.
P-12-0490.....................    08/01/2012    10/29/2012  CBI.............  (G) Additive to   (G) Alkanol,
                                                                               polyurethane      oxybis-,
                                                                               foam.             polymer with
                                                                                                 aromatic
                                                                                                 isocyanate,
                                                                                                 isocyanate-
                                                                                                 terminated,
                                                                                                 polymers with
                                                                                                 1,1',1'',1'''-
                                                                                                 (1,2-
                                                                                                 alkyldinitrilo)
                                                                                                 tetrakis[2-
                                                                                                 alkanol],
                                                                                                 alkylene oxide,
                                                                                                 aromatic
                                                                                                 isocyanate,
                                                                                                 polyalkylenepol
                                                                                                 yalkylene
                                                                                                 glycol ether
                                                                                                 with aliphatic
                                                                                                 triol (3:1),
                                                                                                 polyalkylene
                                                                                                 glycol and
                                                                                                 alkylene oxide,
                                                                                                 polyalkylene
                                                                                                 glycol mono
                                                                                                 (branched
                                                                                                 alkylaromatic)
                                                                                                 ether-blocked.
----------------------------------------------------------------------------------------------------------------

    In Table II. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the NOCs 
received by EPA during this period: The EPA case number assigned to the 
NOC, the date the NOC was received by EPA, the projected end date for 
EPA's review of the NOC, and chemical identity.

                              Table II--12 NOCs Received From 07/23/12 to 08/03/12
----------------------------------------------------------------------------------------------------------------
                                                              Commencement
                  Case No.                    Received date    notice end                  Chemical
                                                                  date
----------------------------------------------------------------------------------------------------------------
P-07-0161..................................      08/03/2012      07/18/2012  (G) Alkene substituted bis phenol.
P-11-0138..................................      07/26/2012      07/16/2012  (G) Propylene oxide adduct of
                                                                              polyhydric alcohol.
P-11-0160..................................      07/31/2012      07/14/2012  (G) Acrylated fatty acid
                                                                              glycerides.
P-11-0392..................................      08/02/2012      07/25/2012  (G) Chlorofluoroalkene.

[[Page 52328]]

 
P-11-0609..................................      07/24/2012      05/30/2012  (S) Propenoic acid, 3-[ (2-hydroxy-
                                                                              1,1-dimethylethyl)amino]-2-methyl-
                                                                              .
P-11-0611..................................      07/24/2012      05/30/2012  (S) Propenoic acid, 3-[ [ 2-hydroxy
                                                                              -1-bism(hydroxymethyl) ethyl]
                                                                              amino]-2-methyl-.
P-12-0227..................................      07/31/2012      07/28/2012  (G) Polycycloolefin polymer.
P-12-0229..................................      07/24/2012      07/20/2012  (G) Subsituted aromatic diazo
                                                                              sulfonic acid salts.
P-12-0276..................................      07/24/2012      07/20/2012  (G) Aromatic sulfonic acid azo dye
                                                                              salts.
P-12-0325..................................      07/24/2012      07/23/2012  (G) Poly[oxy(methyl-1,2-
                                                                              ethanediyl)]-, ,alpha.-[3-
                                                                              substituted-1-oxo-2-alken-1-yl]-
                                                                              .omega.-hydroxy-, alkyl ethers.
P-12-0328..................................      07/25/2012      07/24/2012  (G) MDI modified polyester with 1,2-
                                                                              ethanediol, iso-pr. alc-blocked.
P-96-0876..................................      07/31/2012      07/09/2012  (S) Benzenesulfonamide, N,N-
                                                                              [methylenebis (4,1-
                                                                              phenyleneiminocarbonyl)] bis[4-
                                                                              methyl-.
----------------------------------------------------------------------------------------------------------------

    If you are interested in information that is not included in these 
tables, you may contact EPA as described in Unit II. to access 
additional non-CBI information that may be available.

List of Subjects

    Environmental protection, Chemicals, Hazardous substances, Imports, 
Notice of commencement, Premanufacturer, Reporting and recordkeeping 
requirements, Test marketing exemptions.

    Dated: August 16, 2012.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.
[FR Doc. 2012-20877 Filed 8-28-12; 8:45 am]
BILLING CODE 6560-50-P