[Federal Register Volume 77, Number 157 (Tuesday, August 14, 2012)]
[Notices]
[Pages 48514-48519]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2012-19787]


=======================================================================
-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2012-0438; FRL-9356-4]


Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires 
any person who intends to manufacture (defined by statute to include 
import) a new chemical (i.e., a chemical not on the TSCA Chemical 
Substances Inventory (TSCA Inventory)) to notify EPA and comply with 
the statutory provisions pertaining to the manufacture of new 
chemicals. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to 
publish in the Federal Register a notice of receipt of a premanufacture 
notice (PMN) or an application for a test marketing exemption (TME), 
and to publish in the Federal Register periodic status reports on the 
new chemicals under review and the receipt of notices of commencement 
(NOC) to manufacture those chemicals. This document, which covers the 
period from June 18, 2012 to June 29, 2012, and provides the required 
notice and status report, consists of the PMNs and TMEs, both pending 
or expired, and the NOC to manufacture a new chemical that the Agency 
has received under TSCA section 5 during this time period.

DATES: Comments identified by the specific PMN number or TME number, 
must be received on or before September 13, 2012.

ADDRESSES: Submit your comments, identified by docket identification 
(ID) number EPA-HQ-OPPT-2012-0438, and the specific PMN number or TME 
number for the chemical related to your comment, by one of the 
following methods:
     Federal eRulemaking Portal: http://www.regulations.gov. Follow the on-line instructions for submitting 
comments.
     Mail: Document Control Office (7407M), Office of Pollution 
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 
Pennsylvania Ave. NW., Washington, DC 20460-0001.
     Hand Delivery: OPPT Document Control Office (DCO), EPA 
East Bldg., Rm. 6428, 1201 Constitution Ave. NW., Washington, DC. The 
DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding 
legal holidays. The telephone number for the DCO is (202) 564-8930. 
Such deliveries are only accepted during the DCO's normal hours of 
operation, and special

[[Page 48515]]

arrangements should be made for deliveries of boxed information.
    Instructions: EPA's policy is that all comments received will be 
included in the docket without change and may be made available on-line 
at http://www.regulations.gov, including any personal information 
provided, unless the comment includes information claimed to be 
Confidential Business Information (CBI) or other information whose 
disclosure is restricted by statute. Do not submit information that you 
consider to be CBI or otherwise protected through regulations.gov or 
email. The regulations.gov Web site is an ``anonymous access'' system, 
which means EPA will not know your identity or contact information 
unless you provide it in the body of your comment. If you send an email 
comment directly to EPA without going through regulations.gov, your 
email address will be automatically captured and included as part of 
the comment that is placed in the docket and made available on the 
Internet. If you submit an electronic comment, EPA recommends that you 
include your name and other contact information in the body of your 
comment and with any disk or CD-ROM you submit. If EPA cannot read your 
comment due to technical difficulties and cannot contact you for 
clarification, EPA may not be able to consider your comment. Electronic 
files should avoid the use of special characters, any form of 
encryption, and be free of any defects or viruses.
    Docket: All documents in the docket are listed in the docket index 
available at http://www.regulations.gov. Although listed in the index, 
some information is not publicly available, e.g., CBI or other 
information whose disclosure is restricted by statute. Certain other 
material, such as copyrighted material, will be publicly available only 
in hard copy. Publicly available docket materials are available 
electronically at http://www.regulations.gov, or, if only available in 
hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA 
Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution 
Ave. NW., Washington, DC. The EPA/DC Public Reading Room hours of 
operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding 
legal holidays. The telephone number of the EPA/DC Public Reading Room 
is (202) 566-1744, and the telephone number for the OPPT Docket is 
(202) 566-0280. Docket visitors are required to show photographic 
identification, pass through a metal detector, and sign the EPA visitor 
log. All visitor bags are processed through an X-ray machine and 
subject to search. Visitors will be provided an EPA/DC badge that must 
be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT: 
    For technical information contact: Bernice Mudd, Information 
Management Division (7407M), Office of Pollution Prevention and Toxics, 
Environmental Protection Agency, 1200 Pennsylvania Ave. NW., 
Washington, DC 20460-0001; telephone number: (202) 564-8951; fax 
number: (202) 564-8955; email address: [email protected].
    For general information contact: The TSCA-Hotline, ABVI-Goodwill, 
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 
554-1404; email address: [email protected].

SUPPLEMENTARY INFORMATION: 

I. General Information

A. Does this action apply to me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitter of the PMNs addressed in this action. 
If you have any questions regarding the applicability of this action to 
a particular entity, consult the person listed under FOR FURTHER 
INFORMATION CONTACT.

B. What should I consider as I prepare my comments for EPA?

    1. Submitting CBI. Do not submit this information to EPA through 
regulations.gov or email. Clearly mark the part or all of the 
information that you claim to be CBI. For CBI information in a disk or 
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as 
CBI and then identify electronically within the disk or CD-ROM the 
specific information that is claimed as CBI. In addition to one 
complete version of the comment that includes information claimed as 
CBI, a copy of the comment that does not contain the information 
claimed as CBI must be submitted for inclusion in the public docket. 
Information so marked will not be disclosed except in accordance with 
procedures set forth in 40 CFR part 2.
    2. Tips for preparing your comments. When submitting comments, 
remember to:
    i. Identify the document by docket ID number and other identifying 
information (subject heading, Federal Register date and page number).
    ii. Follow directions. The Agency may ask you to respond to 
specific questions or organize comments by referencing a Code of 
Federal Regulations (CFR) part or section number.
    iii. Explain why you agree or disagree; suggest alternatives and 
substitute language for your requested changes.
    iv. Describe any assumptions and provide any technical information 
and/or data that you used.
    v. If you estimate potential costs or burdens, explain how you 
arrived at your estimate in sufficient detail to allow for it to be 
reproduced.
    vi. Provide specific examples to illustrate your concerns and 
suggest alternatives.
    vii. Explain your views as clearly as possible, avoiding the use of 
profanity or personal threats.
    viii. Make sure to submit your comments by the comment period 
deadline identified.

II. Why is EPA taking this action?

    EPA classifies a chemical substance as either an ``existing'' 
chemical or a ``new'' chemical. Any chemical substance that is not on 
EPA's TSCA Inventory is classified as a ``new chemical,'' while those 
that are on the TSCA Inventory are classified as an ``existing 
chemical.'' For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to 
manufacture or import a new chemical substance for a non-exempt 
commercial purpose is required by TSCA section 5 to provide EPA with a 
PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes 
EPA to allow persons, upon application, to manufacture (includes 
import) or process a new chemical substance, or a chemical substance 
subject to a significant new use rule (SNUR) issued under TSCA section 
5(a), for ``test marketing'' purposes, which is referred to as a test 
marketing exemption, or TME. For more information about the 
requirements applicable to a new chemical go to: http://ww.epa.gov/opt/newchems.
    Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish 
in the Federal Register a notice of receipt of a PMN or an application 
for a TME and to publish in the Federal Register periodic status 
reports on the new chemicals under review and the receipt of NOCs to 
manufacture those chemicals. This status report, which covers the 
period from June 18, 2012 to June 29, 2012, consists of the PMNs and 
TMEs, both pending or expired, and the NOCs to manufacture a new 
chemical that the Agency has received under TSCA section 5 during this 
time period.

[[Page 48516]]

III. Receipt and Status Reports

    In Table I. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the PMNs 
received by EPA during this period: The EPA case number assigned to the 
PMN, the date the PMN was received by EPA, the projected end date for 
EPA's review of the PMN, the submitting manufacturer/importer, the 
potential uses identified by the manufacturer/importer in the PMN, and 
the chemical identity.

                                                    Table I--31 PMNs Received From 6/18/12 to 6/29/12
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                   Projected
           Case No.              Received date    notice end            Manufacturer/Importer                    Use                    Chemical
                                                     date
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-12-0407.....................      06/15/2012      09/12/2012  Cytec Industries, Inc...............  (G) Coating Resin.......  (G) Substituted
                                                                                                                                 carbomoncycles, polymer
                                                                                                                                 with substituted
                                                                                                                                 alkanoic acids and
                                                                                                                                 dialkyleneglycol,
                                                                                                                                 substituted alkylamine-
                                                                                                                                 blocked, compounds with
                                                                                                                                 alkylamino alcohol.
P-12-0408.....................      06/18/2012      09/15/2012  CBI.................................  (G) Binder..............  (G) Alkenedioic acid
                                                                                                                                 dialkyl ester, reaction
                                                                                                                                 products with alkenoic
                                                                                                                                 acid alkyl esters.
P-12-0409.....................      06/18/2012      09/15/2012  CBI.................................  (G) Binder..............  (G) Alkenedioic acid
                                                                                                                                 dialkyl ester, reaction
                                                                                                                                 products with diamine
                                                                                                                                 and alkenoic acid alkyl
                                                                                                                                 esters.
P-12-0410.....................      06/18/2012      09/15/2012  CBI.................................  (G) Binder..............  (G) Alkenedioic acid
                                                                                                                                 dialkyl ester, reaction
                                                                                                                                 products with alkenoic
                                                                                                                                 acid alkyl esters and
                                                                                                                                 diamine.
P-12-0411.....................      06/18/2012      09/15/2012  CBI.................................  (G) Binder..............  (G) Alkenedioic acid
                                                                                                                                 dialkyl ester, reaction
                                                                                                                                 products with diamine
                                                                                                                                 alkenoic acid alkyl
                                                                                                                                 esters.
P-12-0412.....................      06/18/2012      09/15/2012  CBI.................................  (G) Binder..............  (G) Alkenedioic acid
                                                                                                                                 dialkyl ester, reaction
                                                                                                                                 products with diamine
                                                                                                                                 alkenoic acid alkyl
                                                                                                                                 esters.
P-12-0413.....................      06/18/2012      09/15/2012  CBI.................................  (G) Binder..............  (G) Alkenedioic acid
                                                                                                                                 dialkyl ester, reaction
                                                                                                                                 products with diamine
                                                                                                                                 alkenoic acid alkyl
                                                                                                                                 esters.
P-12-0414.....................      06/18/2012      09/15/2012  Kowa American Corp..................  (S) Reactive              (S) 2-propenoic acid, (2-
                                                                                                       intermediate for use in   ethyl-2-methyl-1,3-
                                                                                                       ultra violet, electron    dioxolan-4-yl)methyl
                                                                                                       beams and                 ester.
                                                                                                       conventionally cured
                                                                                                       coating and ink
                                                                                                       formulations (open/non-
                                                                                                       dispersive use).
P-12-0415.....................      06/18/2012      09/15/2012  CBI.................................  (G) Foam insulation.....  (G) Soybean oil, polymer
                                                                                                                                 with adipic acid,
                                                                                                                                 benzoic acid,
                                                                                                                                 difuntional glycols,
                                                                                                                                 glycerol,
                                                                                                                                 pentaerythritol,
                                                                                                                                 phthalic anhydride,
                                                                                                                                 terephthalic acid.
P-12-0416.....................      06/19/2012      09/16/2012  Hanwha International................  (S) Use as an additive    (S) Multiwalled carbon
                                                                                                       for electro-static        nanotubes (CM-95
                                                                                                       discharge (ESD); Use as   grade).
                                                                                                       an additive for weight-
                                                                                                       lighting; Use as an
                                                                                                       additive to reinforce
                                                                                                       materials; Use in the
                                                                                                       production of
                                                                                                       electrodes; Use as an
                                                                                                       additives in seat-
                                                                                                       heaters; Use as an
                                                                                                       electron emitter; Use
                                                                                                       as an additive for heat
                                                                                                       transfer and thermal
                                                                                                       emission; Use as an
                                                                                                       additive for
                                                                                                       electromagnetic
                                                                                                       interface (EMI)
                                                                                                       shielding; Use as a
                                                                                                       pigment; use as a
                                                                                                       functional additive in
                                                                                                       composites and paints.

[[Page 48517]]

 
P-12-0417.....................      06/19/2012      09/16/2012  Hanwha International................  (S) Use as an additive    (S) Multi-walled carbon
                                                                                                       for electro-static        nanotubes (CM-100
                                                                                                       discharge (ESD); Use as   grade).
                                                                                                       an additive for weight-
                                                                                                       lighting; Use as an
                                                                                                       additive to reinforce
                                                                                                       materials; Use in the
                                                                                                       production of
                                                                                                       electrodes; Use as an
                                                                                                       additives in seat-
                                                                                                       heaters; Use as an
                                                                                                       electron emitter; Use
                                                                                                       as an additive for heat
                                                                                                       transfer and thermal
                                                                                                       emission; Use as an
                                                                                                       additive for
                                                                                                       electromagnetic
                                                                                                       interface (EMI)
                                                                                                       shielding; Use as a
                                                                                                       pigment; Use as a
                                                                                                       functional additive in
                                                                                                       composites and paints.
P-12-0418.....................      06/19/2012      09/16/2012  Hanwha International................  (S) Use as an additive    (S) Multi-walled carbon
                                                                                                       for electro-static        nanotubes (CM-150
                                                                                                       discharge (ESD); use as   grade).
                                                                                                       an additive for weight-
                                                                                                       lighting; Use as an
                                                                                                       additive to reinforce
                                                                                                       materials; Use in the
                                                                                                       production of
                                                                                                       electrodes; Use as an
                                                                                                       additives in seat-
                                                                                                       heaters; Use as an
                                                                                                       electron emitter; Use
                                                                                                       as an additive for heat
                                                                                                       transfer and thermal
                                                                                                       emission; Use as an
                                                                                                       additive for
                                                                                                       electromagnetic
                                                                                                       interface (EMI)
                                                                                                       shielding; Use as a
                                                                                                       pigment; Use as a
                                                                                                       functional additive in
                                                                                                       composites and paints.
P-12-0419.....................      06/19/2012      09/16/2012  Hanwha international................  (S) Use as an additive    (S) Multi-walled carbon
                                                                                                       for electro-static        nanotubes (CM-250
                                                                                                       discharge (ESD); Use as   grade).
                                                                                                       an additive for weight-
                                                                                                       lighting; Use as an
                                                                                                       additive to reinforce
                                                                                                       materials; Use in the
                                                                                                       production of
                                                                                                       electrodes; Use as an
                                                                                                       additives in seat-
                                                                                                       heaters; Use as an
                                                                                                       electron emitter; Use
                                                                                                       as an additive for heat
                                                                                                       transfer and thermal
                                                                                                       emission; Use as an
                                                                                                       additive for
                                                                                                       electromagnetic
                                                                                                       interface (EMI)
                                                                                                       shielding; Use as a
                                                                                                       pigment; Use as a
                                                                                                       functional additive in
                                                                                                       composites and paints.
P-12-0420.....................      06/20/2012      09/17/2012  CBI.................................  (G) Chemical              (G) Aromatic polyester.
                                                                                                       intermediate.
P-12-0421.....................      06/20/2012      09/17/2012  Inter-plastic Corporation...........  (S) Unsaturated ester     (G) Lower Molecular
                                                                                                       for finished polyester    weight unsaturated
                                                                                                       resin blend.              ester.
P-12-0422.....................      06/20/2012      09/17/2012  Dakota Gasification Company.........  (S) Sold to off-site      (S) Tar, Brown, distant
                                                                                                       vendor for blending the   over heads.
                                                                                                       existing tar oil with
                                                                                                       petroleum oil for feed
                                                                                                       to refineries; sold to
                                                                                                       off-site vendor for
                                                                                                       feedstock to
                                                                                                       hydrocracker process to
                                                                                                       make different cut of
                                                                                                       fuels to blend with
                                                                                                       other fuels.
P-12-0423.....................      06/21/2012      09/18/2012  Itaconix Corp.......................  (G) Anti-scaling agent..  (G) Polyitaconic acid,
                                                                                                                                 sodium salt.
P-12-0424.....................      06/21/2012      09/18/2012  CBI.................................  (G) Chemical              (G) Perfluorinated
                                                                                                       intermediate.             alcohol.
P-12-0425.....................      06/22/2012      09/19/2012  CBI.................................  (S) Heat transfer fluid;  (G)
                                                                                                       cleaning agent; carrier   Methoxytridecafluorohep
                                                                                                       fluid; cleaning--         tene isomers.
                                                                                                       aerosol.

[[Page 48518]]

 
P-12-0426.....................      06/22/2012      09/19/2012  Solvay Chemicals, Inc...............  (S) Component of various  (S) Aluminate(1-),
                                                                                                       types of brazing fluxes   tetrafluoro-, cesium,
                                                                                                       (e.g., furnace, flame,    (T-4)-.
                                                                                                       etc.) typically used to
                                                                                                       assemble such products
                                                                                                       as heat exchangers
                                                                                                       (e.g. radiators, heat
                                                                                                       pumps).
P-12-0427.....................      06/27/2012      09/24/2012  CBI.................................  (G) Thermoplastic binder  (G) Sytrene acrylate
                                                                                                                                 polymer.
P-12-0428.....................      06/27/2012      09/24/2012  CBI.................................  (G) Thermoplastic binder  (G) Sytrene acrylate
                                                                                                                                 polymer.
P-12-0429.....................      06/22/2012      09/19/2012  CBI.................................  (G) Catalytic converter   (G) Metallic nano
                                                                                                       component.                particle solution.
P-12-0430.....................      06/27/2012      09/24/2012  CBI.................................  (G) Open, non-dispersive  (G) Yttrium borate
                                                                                                       use--PMN substance used   phosphate vanadate with
                                                                                                       to coat the interior      europium and additional
                                                                                                       glass surface of lamps.   dopants.
P-12-0431.....................      06/27/2012      09/24/2012  CBI.................................  (G) Catalyst............  (G) Phosphazene.
P-12-0432.....................      06/27/2012      09/24/2012  CBI.................................  (G) Destructive use--     (G) Mixed metal oxalate.
                                                                                                       intermediate
                                                                                                       precipitate used to
                                                                                                       produce phosphors.
P-12-0433.....................      06/27/2012      09/24/2012  Ineos Chlor Americas................  (G) Additive............  (S) Alkanes, C18	20,
                                                                                                                                 chloro.
P-12-0434.....................      06/27/2012      09/24/2012  CBI.................................  (S) Feedstock for         (G) Aromatic hydrocarbon
                                                                                                       fractionation process.    mixtures.
P-12-0435.....................      06/28/2012      09/25/2012  CBI.................................  (G) Additive, open, non-  (G) Poly(butyl acrylate-
                                                                                                       dispersive use.           methacryloyloxyethylpho
                                                                                                                                 sphoric acid ester).
P-12-0436.....................      06/28/2012      09/25/2012  Greene Tweed & Company..............  (S) Cross linker for      (G) Substituted,
                                                                                                       polymers.                 aromatic hydrocarbon.
P-12-0437.....................      06/29/2012      09/26/2012  CBI.................................  (G) Component in          (G) Modified tannin.
                                                                                                       drilling fluid.
--------------------------------------------------------------------------------------------------------------------------------------------------------

    In Table II. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the TMEs 
received by EPA during this period: The EPA case number assigned to the 
TME, the date the TME was received by EPA, the projected end date for 
EPA's review of the TME, the submitting manufacturer/importer, the 
potential uses identified by the manufacturer/importer in the TME, and 
the chemical identity.

                                Table II--2 TMEs Received From 6/18/12 to 6/29/12
----------------------------------------------------------------------------------------------------------------
                                            Projected
        Case No.          Received date    notice end      Manufacturer/           Use              Chemical
                                              date            importer
----------------------------------------------------------------------------------------------------------------
T-12-0011..............      06/15/2012      07/29/2012  Cytec Industries,  (G) Coating resin  (G) Substituted
                                                          Inc..                                 carbomoncycles,
                                                                                                polymer with
                                                                                                substituted
                                                                                                alkanoic acids
                                                                                                and
                                                                                                dialkyleneglycol
                                                                                                , substituted
                                                                                                alkylamine-
                                                                                                blocked,
                                                                                                compounds with
                                                                                                alkylamino
                                                                                                alcohol.
T-12-0012..............      06/29/2012      08/12/2012  CBI..............  (G) Component in   (G) Modified
                                                                             drilling fluid.    tannin.
----------------------------------------------------------------------------------------------------------------

    In Table III of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the NOCs 
received by EPA during this period: The EPA case number assigned to the 
NOC, the date the NOC was received by EPA, the projected end date for 
EPA's review of the NOC, and chemical identity.

           Table III--22 NOCs Received From 6/18/12 to 6/29/12
------------------------------------------------------------------------
                                         Commencement
       Case No.          Received date    notice end        Chemical
                                             date
------------------------------------------------------------------------
P-06-0726.............      06/15/2012      05/31/2012  (G) Cyclical
                                                         acid, polymer
                                                         with
                                                         isocyanate,
                                                         diols, diacids,
                                                         alkanolamine,
                                                         amine salt.
P-10-0337.............      06/29/2012      06/25/2012  (G)
                                                         Methacrylated
                                                         polyester
                                                         oligomer.
P-10-0574.............      06/29/2012      06/19/2012  (G)
                                                         Polyisocyanate,
                                                         reaction
                                                         product with
                                                         polyalkylene
                                                         oxide.
P-11-0084.............      06/26/2012      06/20/2012  (G) Epoxylated
                                                         nitrile rubber.
P-11-0436.............      06/15/2012      06/11/2012  (G) Polyether
                                                         sulfate salt
                                                         derivative.
P-11-0447.............      06/20/2012      06/19/2012  (G)
                                                         Polyetheramine.
P-11-0466.............      06/15/2012      06/06/2012  (G) Alkoxylated
                                                         amine
                                                         derivative.
P-11-0506.............      06/20/2012      05/26/2012  (G)
                                                         Polyaminoamide.
P-11-0507.............      06/26/2012      05/31/2012  (G) Polymeric
                                                         sulfide.

[[Page 48519]]

 
P-11-0649.............      06/20/2012      06/15/2012  (G) Substituted
                                                         carbomomocycle,
                                                         polymer with
                                                         alkyldiols, di
                                                         (substituted
                                                         carbomonocycle
                                                         ester).
P-12-0050.............      06/21/2012      05/28/2012  (G) Sulfonated
                                                         stilbene
                                                         derivative.
P-12-0097.............      06/22/2012      06/06/2012  (G)
                                                         Amidoalkoxysila
                                                         ne.
P-12-0101.............      06/27/2012      05/24/2012  (G) Substituted
                                                         carbomonocyclic
                                                         dicarboxylic
                                                         acid, polymer
                                                         with 1,2-
                                                         ethanediol and
                                                         2,2'-[9H-
                                                         fluoren-9-
                                                         ylidenebis(4,1-
                                                         phenyleneoxy)]b
                                                         is[ethanol].
P-12-0102.............      06/27/2012      05/24/2012  (G) Substituted
                                                         carbomonocyclic
                                                         dicarboxylic
                                                         acid, dialkyl
                                                         ester polymer
                                                         with 1,2-
                                                         ethanediol and
                                                         2,2'-[9H-
                                                         fluoren-9-
                                                         ylidenebis(4,1-
                                                         phenyleneoxy)]b
                                                         is[ethanol].
P-12-0184.............      06/20/2012      06/13/2012  (G) Acrylic
                                                         acid,
                                                         carbamate,
                                                         alkyl ester.
P-12-0185.............      06/20/2012      06/13/2012  (G) Acrylic
                                                         acid,
                                                         carbamate,
                                                         alkyl ester.
P-12-0198.............      06/22/2012      06/13/2012  (G) Siloxane
                                                         polyalkyleneoxi
                                                         de copolymer.
P-12-0202.............      06/20/2012      05/31/2012  (G)
                                                         Triazinylaminos
                                                         tilbene.
P-12-0203.............      06/20/2012      05/31/2012  (G)
                                                         Triazinylaminos
                                                         tilbene.
P-12-0209.............      06/26/2012      06/06/2012  (G) Aromatic
                                                         polyester
                                                         polyol.
P-12-0222.............      06/27/2012      06/08/2012  (G) Alkyl
                                                         acrylate cross-
                                                         linked
                                                         copolymer.
P-12-0262.............      06/28/2012      06/27/2012  (G)
                                                         Triethanolamine
                                                         oleate
                                                         triester.
------------------------------------------------------------------------

    If you are interested in information that is not included in these 
tables, you may contact EPA as described in Unit II. to access 
additional non-CBI information that may be available.

List of Subjects

    Environmental protection, Chemicals, Hazardous substances, Imports, 
Notice of commencement, Premanufacturer, Reporting and recordkeeping 
requirements, Test marketing exemptions.

    Dated: July 25, 2012.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.
[FR Doc. 2012-19787 Filed 8-13-12; 8:45 am]
BILLING CODE 6560-50-P