[Federal Register Volume 77, Number 80 (Wednesday, April 25, 2012)]
[Notices]
[Pages 24705-24709]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2012-9919]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2012-0191; FRL-9347-1]


Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires 
any person who intends to manufacture (defined by statute to include 
import) a new chemical (i.e., a chemical not on the TSCA Chemical 
Substances Inventory (TSCA Inventory)) to notify EPA and comply with 
the statutory provisions pertaining to the manufacture of new 
chemicals. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to 
publish in the Federal Register a notice of receipt of a premanufacture 
notice (PMN) or an application for a test marketing exemption (TME), 
and to publish in the Federal Register periodic status reports on the 
new chemicals under review and the receipt of notices of commencement 
(NOC) to manufacture those chemicals. This document, which covers the 
period from March 26, 2012 to April 6, 2012, and provides the required 
notice and status report, consists of the PMNs and TMEs, both pending 
or expired, and the NOC to manufacture a new chemical that the Agency 
has received under TSCA section 5 during this time period.

DATES: Comments identified by the specific PMN number or TME number, 
must be received on or before May 25, 2012.

ADDRESSES: Submit your comments, identified by docket identification 
(ID) number EPA-HQ-OPPT-2012-0191, and the specific PMN number or TME 
number for the chemical related to your comment, by one of the 
following methods:
     Federal eRulemaking Portal: http://www.regulations.gov. 
Follow the on-line instructions for submitting comments.
     Mail: Document Control Office (7407M), Office of Pollution 
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 
Pennsylvania Ave. NW., Washington, DC 20460-0001.
     Hand Delivery: OPPT Document Control Office (DCO), EPA 
East Bldg., Rm. 6428, 1201 Constitution Ave. NW., Washington, DC. The 
DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding 
legal holidays. The telephone number for the DCO is (202) 564-8930. 
Such deliveries are only accepted during the DCO's normal hours of 
operation, and special arrangements should be made for deliveries of 
boxed information.
    Instructions: EPA's policy is that all comments received will be 
included in the docket without change and may be made available on-line 
at http://www.regulations.gov, including any personal information 
provided, unless the comment includes information claimed to be 
Confidential Business Information (CBI) or other information whose 
disclosure is restricted by statute. Do not submit information that you 
consider to be CBI or otherwise protected through regulations.gov or 
email. The regulations.gov Web site is an ``anonymous access'' system, 
which means EPA will not know your identity or contact information 
unless you provide it in the body of your comment. If you send an email 
comment directly to EPA without going through regulations.gov, your 
email address will be automatically captured and included as part of 
the comment that is placed in the docket and made available on the 
Internet. If you submit an electronic comment, EPA recommends that you 
include your name and other contact information in the body of your 
comment and with any disk or CD-ROM you submit. If EPA cannot read your 
comment due to technical difficulties and cannot contact you for 
clarification, EPA may not be able to consider your comment. Electronic 
files should avoid the use of special characters, any form of 
encryption, and be free of any defects or viruses.
    Docket: All documents in the docket are listed in the docket index 
available at http://www.regulations.gov. Although listed in the index, 
some information is not publicly available, e.g., CBI or other 
information whose disclosure is restricted by statute. Certain other 
material, such as copyrighted material, will be publicly available only 
in hard copy. Publicly available docket materials are available 
electronically at http://www.regulations.gov, or, if only available in 
hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA 
Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution 
Ave. NW., Washington, DC. The EPA/DC Public Reading Room hours of 
operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding 
legal holidays. The telephone number of the EPA/DC Public Reading Room 
is (202) 566-1744, and the telephone number for the OPPT Docket is 
(202) 566-0280. Docket visitors are required to show photographic 
identification, pass through a metal detector, and sign the EPA visitor 
log. All visitor bags are processed through an X-ray machine and 
subject to search. Visitors will be provided an EPA/DC badge that must 
be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT: For technical information contact: 
Bernice Mudd, Information Management Division (7407M), Office of 
Pollution Prevention and Toxics, Environmental Protection Agency, 1200 
Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: 
(202) 564-8951; fax number: (202) 564-8955; email address: 
[email protected].
    For general information contact: The TSCA-Hotline, ABVI-Goodwill, 
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 
554-1404; email address: [email protected].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this action apply to me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitter of the PMNs addressed in this action. 
If you have any questions regarding the applicability of this action to 
a particular entity, consult the person listed under FOR FURTHER 
INFORMATION CONTACT.

B. What should I consider as I prepare my comments for EPA?

    1.  Submitting CBI. Do not submit this information to EPA through 
regulations.gov or email. Clearly mark the part or all of the 
information that you claim to be CBI. For CBI information in a disk or 
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as 
CBI and then identify electronically within the disk or CD-ROM the 
specific information that is claimed as CBI. In addition to one 
complete version of the comment that includes information claimed as 
CBI, a copy of the comment that does not contain the information 
claimed as CBI must be submitted for inclusion in the public docket. 
Information so marked will not be disclosed except in accordance with 
procedures set forth in 40 CFR part 2.

[[Page 24706]]

    2. Tips for preparing your comments. When submitting comments, 
remember to:
    i. Identify the document by docket ID number and other identifying 
information (subject heading, Federal Register date and page number).
    ii. Follow directions. The Agency may ask you to respond to 
specific questions or organize comments by referencing a Code of 
Federal Regulations (CFR) part or section number.
    iii. Explain why you agree or disagree; suggest alternatives and 
substitute language for your requested changes.
    iv. Describe any assumptions and provide any technical information 
and/or data that you used.
    v. If you estimate potential costs or burdens, explain how you 
arrived at your estimate in sufficient detail to allow for it to be 
reproduced.
    vi. Provide specific examples to illustrate your concerns and 
suggest alternatives.
    vii. Explain your views as clearly as possible, avoiding the use of 
profanity or personal threats.
    viii. Make sure to submit your comments by the comment period 
deadline identified.

II. Why is EPA taking this action?

    EPA classifies a chemical substance as either an ``existing'' 
chemical or a ``new'' chemical. Any chemical substance that is not on 
EPA's TSCA Inventory is classified as a ``new chemical,'' while those 
that are on the TSCA Inventory are classified as an ``existing 
chemical.'' For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to 
manufacture or import a new chemical substance for a non-exempt 
commercial purpose is required by TSCA section 5 to provide EPA with a 
PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes 
EPA to allow persons, upon application, to manufacture (includes 
import) or process a new chemical substance, or a chemical substance 
subject to a significant new use rule (SNUR) issued under TSCA section 
5(a), for ``test marketing'' purposes, which is referred to as a test 
marketing exemption, or TME. For more information about the 
requirements applicable to a new chemical go to: http://ww.epa.gov/opt/newchems.
    Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish 
in the Federal Register a notice of receipt of a PMN or an application 
for a TME and to publish in the Federal Register periodic status 
reports on the new chemicals under review and the receipt of NOCs to 
manufacture those chemicals. This status report, which covers the 
period from March 26, 2012 to April 6, 2012, consists of the PMNs and 
TME, both pending or expired, and the NOCs to manufacture a new 
chemical that the Agency has received under TSCA section 5 during this 
time period.

III. Receipt and Status Reports

    In Table I. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the PMNs 
received by EPA during this period: The EPA case number assigned to the 
PMN, the date the PMN was received by EPA, the projected end date for 
EPA's review of the PMN, the submitting manufacturer/importer, the 
potential uses identified by the manufacturer/importer in the PMN, and 
the chemical identity.

                               Table I--52 PMNs Received From 03/26/12 to 04/06/12
----------------------------------------------------------------------------------------------------------------
                                       Projected
     Case No.        Received date    notice end      Manufacturer/           Use                Chemical
                                         date            importer
----------------------------------------------------------------------------------------------------------------
P-12-0261.........      03/26/2012      06/23/2012  CBI..............  (G) Rubber         (G) Polyurethane.
                                                                        adhesive.
P-12-0262.........      03/26/2012      06/23/2012  CBI..............  (G) Lubricant      (G) Triethanolamine
                                                                        additive.          oleate triester .
P-12-0263.........      03/27/2012      06/24/2012  American           (S) Special        (S) Mercury,
                                                     Chemical, Ltd.     catalyst for       diphenyl[[mu]-[2-
                                                                        elastomer and      (tetrapropenyl)butane
                                                                        molded two-        dioato (2-)-[kappa]01
                                                                        component          : .[kappa]:.04]]di-.
                                                                        polyurethanes.
P-12-0264.........      03/28/2012      06/25/2012  CBI..............  (G) Oil well       (G) Substituted, 2-
                                                                        stimulation        hydroxy-n,n-dimethyl-
                                                                        additive.          N-[3-[[(13z)-1-oxo-13-
                                                                                           docosen-1-
                                                                                           yl]amino]propyl]-3-
                                                                                           sulfo-, inner salt.
P-12-0265.........      03/28/2012      06/25/2012  CBI..............  (G) Monomer......  (G) Carbamic acid, N-
                                                                                           [1-methyl-1-[3-(1-
                                                                                           methylethenyl)phenyl]
                                                                                           ethyl]-, substituted
                                                                                           ester.
P-12-0266.........      03/28/2012      06/25/2012  CBI..............  (G) Fracturing     (G) 2-propenoic acid,
                                                                        fluid additive.    telomer with
                                                                                           substituted N-[1-
                                                                                           methyl-1-[3-(1-
                                                                                           methylethenyl)phenyl]
                                                                                           ethyl]carbamate and 2-
                                                                                           propanol,
                                                                                           peroxydisulfuric acid
                                                                                           ([(hO)s(O)2]2O2)sodiu
                                                                                           m salt (1:2)-
                                                                                           initiated.
P-12-0267.........      03/28/2012      06/25/2012  CBI..............  (G) Fracturing     (G) 2-propenoic acid,
                                                                        fluid additive.    telomer with
                                                                                           substituted N-[1-
                                                                                           methyl-1-[3-(1-
                                                                                           methylethenyl)phenyl]
                                                                                           ethyl]carbamate and 2-
                                                                                           propanol, sodium
                                                                                           salt,
                                                                                           peroxydisulfuric acid
                                                                                           ([(hO)s(O)2]2O2)
                                                                                           sodium salt (1:2)-
                                                                                           initiated.
P-12-0268.........      03/28/2012      06/25/2012  CBI..............  (G) Fracturing     (G) 2-propenoic acid,
                                                                        fluid additive.    telomer with
                                                                                           substituted N-[1-
                                                                                           methyl-1-[3-(1-
                                                                                           methylethenyl)phenyl]
                                                                                           ethyl]carbamate and 2-
                                                                                           propanol, ammonium
                                                                                           salt,
                                                                                           peroxydisulfuric acid
                                                                                           ([(hO)s(O)2]2O2)
                                                                                           sodium salt (1:2)-
                                                                                           initiated.
P-12-0269.........      03/28/2012      06/25/2012  CBI..............  (G) Fracturing     (G) 2-propenoic acid,
                                                                        fluid additive.    telomer with
                                                                                           substituted N-[1-
                                                                                           methyl-1-[3-(1-
                                                                                           methylethenyl)phenyl]
                                                                                           ethyl]carbamate and 2-
                                                                                           propanol, potassium
                                                                                           salt,
                                                                                           peroxydisulfuric acid
                                                                                           ([(hO)s(O)2]2O2)
                                                                                           sodium salt (1:2)-
                                                                                           initiated.
P-12-0270.........      03/28/2012      06/25/2012  CBI..............  (G) Fracturing     (G) 2-propenoic acid,
                                                                        fluid additive.    telomer with
                                                                                           substituted N-[1-
                                                                                           methyl-1-[3-(1-
                                                                                           methylethenyl)phenyl]
                                                                                           ethyl]carbamate and 3-
                                                                                           mercaptopropanoic
                                                                                           acid, 1.1-
                                                                                           diemethylpropyl 2-
                                                                                           ethylhexaneperoxoate-
                                                                                           initiated.

[[Page 24707]]

 
P-12-0271.........      03/28/2012      06/25/2012  Henkel             (S) Hot melt type  (S) Hexanedioc acid,
                                                     Corporation.       adhesive used      polymer with 1,6-
                                                                        for panel          hexanediol, [alpha]-
                                                                        lamination and     hydro-[omega]-
                                                                        other assemblies.  hydroxypoly[oxy(methy
                                                                                           l-1,2-ethanediyl)],
                                                                                           1,1'-
                                                                                           methylenebis[isocyana
                                                                                           tobenzene] and
                                                                                           [alpha], [alpha]'-[(1-
                                                                                           methylethylidene)di-
                                                                                           4,1-
                                                                                           phenylene]bis[[omega]-
                                                                                           hydroxypoly(oxy-1,2-
                                                                                           ethanediyl)].
P-12-0272.........      03/28/2012      06/25/2012  Henkel             (S) Hot melt type  (S) 1,3-
                                                     Corporation.       adhesive used      benzenedicarboylic
                                                                        for panel          acid, polymer with
                                                                        lamination and     1,4-
                                                                        other assemblies.  benzenedicarboxylic
                                                                                           acid, 2,2-dimethyl-
                                                                                           1,3-propanediol,
                                                                                           dodecanedioic acid,
                                                                                           1,2-ethanediol,
                                                                                           hexanedioic acid, 1,6-
                                                                                           hexanediol, [alpha]-
                                                                                           hydroxy-[omega]-
                                                                                           hydroxypoly[oxy(methy
                                                                                           l-1,2-ethanediyl)]
                                                                                           and 1,1'-
                                                                                           methylenebis[4-
                                                                                           isocyanatobenzene].
P-12-0273.........      03/28/2012      06/25/2012  CBI..............  (S) Industrial     (S) Coconut oil,
                                                                        coating.           polymer with di-me
                                                                                           malonate,
                                                                                           pentaerythritol,
                                                                                           phthalic anhydride
                                                                                           and
                                                                                           trimethylolpropane.
P-12-0274.........      03/29/2012      06/26/2012  CBI..............  (G) Adhesive for   (G) Polyisocyanate
                                                                        open non-          adduct.
                                                                        descriptive use.
P-12-0275.........      03/29/2012      06/26/2012  Cytec Industries,  (S) Chemical       (S) Phosphonium,
                                                     Inc.               reactant for       tributyltetradecyl-,
                                                                        production of      chloride.
                                                                        proprietary
                                                                        chemical for the
                                                                        electronics
                                                                        industry.
P-12-0276.........      03/30/2012      06/27/2012  Huntsman           (S) Exhaust        (G) Aromatic sulfonic
                                                     Corporation.       dyeing of          acid azo dye salts.
                                                                        cellulosic
                                                                        fabrics.
P-12-0277.........      03/30/2012      06/27/2012  CBI..............  (G) Platicizer     (G) Chloro alkanes.
                                                                        and lubricant
                                                                        with flame
                                                                        retardant
                                                                        properties.
P-12-0278.........      03/30/2012      06/27/2012  CBI..............  (G) Platicizer     (G) Chloro alkanes.
                                                                        and lubricant
                                                                        with flame
                                                                        retardant
                                                                        properties.
P-12-0279.........      03/30/2012      06/27/2012  CBI..............  (G) Platicizer     (G) Chloro alkanes.
                                                                        and lubricant
                                                                        with flame
                                                                        retardant
                                                                        properties.
P-12-0280.........      03/30/2012      06/27/2012  CBI..............  (G) Platicizer     (G) Chloro alkanes.
                                                                        and lubricant
                                                                        with flame
                                                                        retardant
                                                                        properties.
P-12-0281.........      03/30/2012      06/27/2012  CBI..............  (G) Platicizer     (G) Chloro alkanes.
                                                                        and lubricant
                                                                        with flame
                                                                        retardant
                                                                        properties.
P-12-0282.........      03/30/2012      06/27/2012  CBI..............  (G) Platicizer     (G) Chloro alkanes.
                                                                        and lubricant
                                                                        with flame
                                                                        retardant
                                                                        properties.
P-12-0283.........      03/30/2012      06/27/2012  CBI..............  (G) Platicizer     (G) Chloro alkanes.
                                                                        and lubricant
                                                                        with flame
                                                                        retardant
                                                                        properties.
P-12-0284.........      03/30/2012      06/27/2012  CBI..............  (G) Platicizer     (G) Chloro alkanes.
                                                                        and lubricant
                                                                        with flame
                                                                        retardant
                                                                        properties.
P-12-0285.........      03/30/2012      06/27/2012  TTM Technologies,  (S) Raw material   (S) Copper(2+),
                                                     Inc.               for production     tetraamine-,
                                                                        of copper          dichloride.
                                                                        chemicals; raw
                                                                        material for the
                                                                        production of
                                                                        animal feed
                                                                        micronutrients.
P-12-0286.........      04/03/2012      07/01/2012  CBI..............  (G) Coating for    (G) Lightly branched
                                                                        plastics.          polyester.
P-12-0287.........      04/03/2012      07/01/2012  CBI..............  (G) Coating for    (G) Lightly branched
                                                                        plastics.          aliphatic polyester.
P-12-0288.........      04/03/2012      07/01/2012  Brueggema NN       (G) Zinc is a....  Carbonic acid zinc
                                                     Chemical U.S.,                        salt basic.
                                                     Inc.
P-12-0289.........      04/04/2012      07/02/2012  CBI..............  (G) Industrial     (G) Decanedioic acid,
                                                                        lubricant.         polymer with alcohol,
                                                                                           isooctadecanoate.
P-12-0290.........      04/04/2012      07/02/2012  CBI..............  (G) Resin will be  (G) Polyurethane
                                                                        used as one of     acrylate.
                                                                        the reactive
                                                                        components in a
                                                                        2-part chemical
                                                                        anchor cartridge
                                                                        system.
P-12-0291.........      04/04/2012      07/02/2012  CBI..............  (G) Additive,      (G) Fluoroalkyl
                                                                        open, non-         modified
                                                                        dispersive use.    polydimethylsiloxane.

[[Page 24708]]

 
P-12-0292.........      04/05/2012      07/03/2012  CBI..............  (G) Use in carbon  (S) Coke (coal),
                                                                        graphite           secondary pitch.
                                                                        industry.
P-12-0293.........      04/05/2012      07/03/2012  CBI..............  (S) Conductive     (G) Substituted
                                                                        polymer for use    thiophene polymer.
                                                                        in batteries.
P-12-0294.........      04/05/2012      07/03/2012  CBI..............  (G) Open, non-     (G) Potassium
                                                                        dispersive use--   fluorosilicate
                                                                        PMN substance      modified.
                                                                        used in the
                                                                        manufacture of
                                                                        lamps.
P-12-0295.........      04/05/2012      07/03/2012  CBI..............  (G) Leather        (G) Dihydroxyalkanoic
                                                                        coating            acid-, polymer with
                                                                        component.         hydrazine,
                                                                                           polyalkylene glycol
                                                                                           and
                                                                                           diisocyanatoalkyl,
                                                                                           cmpd with
                                                                                           trialkylamine.
P-12-0296.........      04/05/2012      07/03/2012  CBI..............  (G) Resin for      (G) Branched acid
                                                                        waterborne         functional polyeste.
                                                                        automotive &
                                                                        industrial
                                                                        coatings.
P-12-0297.........      04/06/2012      07/04/2012  Gelest, Inc......  (G) Synthesis of   (G) Alkylsilane.
                                                                        organosilane.
P-12-0298.........      04/05/2012      07/03/2012  CBI..............  (G) Adhesive.....  (G) Vinylidene ester.
P-12-0299.........      04/05/2012      07/03/2012  CBI..............  (G) Adhesive.....  (G) Vinylidene ester.
P-12-0300.........      04/05/2012      07/03/2012  CBI..............  (G) Intermediate.  (G) Poly(alkyl
                                                                                           alkenoate).
P-12-0301.........      04/05/2012      07/03/2012  CBI..............  (G) Intermediate.  (G) Poly(alkyl
                                                                                           alkenoate).
P-12-0302.........      04/06/2012      07/04/2012  CBI..............  (G) Polymer for    (G) Fatty acid
                                                                        paper coatings.    modified polyethylene
                                                                                           terephthalate
                                                                                           polyester resin.
P-12-0303.........      04/06/2012      07/04/2012  CBI..............  (G) Polymer for    (G) Fatty acid
                                                                        paper coatings.    modified polyethylene
                                                                                           terephthalate
                                                                                           polyester resin.
P-12-0304.........      04/06/2012      07/04/2012  CBI..............  (G) Polymer for    (G) Fatty acid
                                                                        paper coatings.    modified polyethylene
                                                                                           terephthalate
                                                                                           polyester resin.
P-12-0305.........      04/06/2012      07/04/2012  CBI..............  (G) Polymer for    (G) Fatty acid
                                                                        paper coatings.    modified polyethylene
                                                                                           terephthalate
                                                                                           polyester resin.
P-12-0306.........      04/06/2012      07/04/2012  CBI..............  (G) Polymer for    (G) Fatty acid
                                                                        paper coatings.    modified polyethylene
                                                                                           terephthalate
                                                                                           polyester resin.
P-12-0307.........      04/06/2012      07/04/2012  CBI..............  (G) Polymer for    (G) Fatty acid
                                                                        paper coatings.    modified polyethylene
                                                                                           terephthalate
                                                                                           polyester resin.
P-12-0308.........      04/06/2012      07/04/2012  CBI..............  (G) Industrial     (G) Alkyl
                                                                        feedstock          triglycerides,
                                                                        chemical.          saturated and
                                                                                           unsaturated.
P-12-0309.........      04/06/2012      07/04/2012  Gelest, Inc......  (G) Synthesis of   (G) Grignard reagent.
                                                                        organosilane.
P-12-0310.........      04/06/2012      07/04/2012  Gelest, Inc......  (G) Synthesis of   (G) Alkylsilane.
                                                                        organosilane.
P-12-0311.........      04/06/2012      07/04/2012  Gelest, Inc......  (G) Precursor to   (G) Alkylsilane.
                                                                        an inert,
                                                                        thermally stable
                                                                        thin film
                                                                        barrier.
P-12-0312.........      04/06/2012      07/04/2012  CBI..............  (S) Catalyst       (S) Aluminoxanes, me.
                                                                        component for
                                                                        polymerization
                                                                        and
                                                                        oligomerization.
----------------------------------------------------------------------------------------------------------------

    In Table II. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the TMEs 
received by EPA during this period: The EPA case number assigned to the 
TME, the date the TME was received by EPA, the projected end date for 
EPA's review of the TME, the submitting manufacturer/importer, the 
potential uses identified by the manufacturer/importer in the TME, and 
the chemical identity.

                              Table II--1 TME's Received From 03/26/12 to 04/06/12
----------------------------------------------------------------------------------------------------------------
                                         Projected
      Case No.         Received date    notice end       Manufacturer/            Use              Chemical
                                           date            importer
----------------------------------------------------------------------------------------------------------------
T-12-0008...........      03/29/2012      05/12/2012  Cytec Industries,   (S) Chemical        (S) Phosphonium,
                                                       Inc.                reactant for        tributyltetradecy
                                                                           production of       l-, chloride.
                                                                           proprietary
                                                                           chemical for the
                                                                           electronics
                                                                           industry.
----------------------------------------------------------------------------------------------------------------

    In Table III. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the NOCs 
received by EPA during this period: The EPA case number assigned to the 
NOC, the date the NOC was received by EPA, the projected end date for 
EPA's review of the NOC, and chemical identity.

[[Page 24709]]



                              Table III--19 NOCs Received From 03/26/12 to 04/06/12
----------------------------------------------------------------------------------------------------------------
                                                              Commencement
                  Case No.                    Received date    notice end                  Chemical
                                                                  date
----------------------------------------------------------------------------------------------------------------
P-00-1087..................................      03/28/2012      03/15/2012  (G) Di-alkyl borane.
P-06-0372..................................      03/28/2012      03/22/2012  (G) Alkyl benzene sulfonate.
P-09-0387..................................      04/05/2012      04/02/2012  (G) Epoxidized fatty acids, polymer
                                                                              with organic acids and alcohols
                                                                              compound with amine alcohol.
P-10-0459..................................      03/29/2012      03/05/2012  (S) Carbonic acid, dimethyl ester,
                                                                              polymer with 2-ethyl-2-
                                                                              (hydroxymethyl)-1,3-propanediol
                                                                              and 1,3-propanediol.
P-11-0038..................................      03/27/2012      03/02/2012  (S) Carbonic acid, dimethyl ester,
                                                                              polymer with 2,2-
                                                                              bis(hydroxymethyl)-1,3-
                                                                              propanediol, cyclohexyl ester.
P-11-0079..................................      04/02/2012      03/22/2012  (G) Polyester, polymer with 2-ethyl-
                                                                              2-(hydroxymethyl)-1,3-propanediol
                                                                              and 5-isocyanato-1-
                                                                              (isocyanatomethyl)-1,3,3-
                                                                              trimethylcyclohexane.
P-11-0265..................................      03/26/2012      03/19/2012  (G) Dialkyl imidazolium salt.
P-11-0502..................................      03/28/2012      03/27/2012  (G) Acrylic solution polymer.
P-11-0552..................................      03/26/2012      03/15/2012  (G) Polyaminoamide, sulfate salt.
P-11-0567..................................      03/26/2012      02/02/2012  (G) Fluoropolymer.
P-11-0569..................................      03/26/2012      03/05/2012  (G) Fluoropolymer.
P-11-0592..................................      03/29/2012      03/15/2012  (G) 2-substituted phtalic acid
                                                                              ester.
P-11-0638..................................      03/23/2012      03/14/2012  (G) Aminocarbonyl ammonio carboxy
                                                                              modified polyolefin.
P-12-0001..................................      03/23/2012      03/12/2012  (G) Aromatic isocyanate, alkyl
                                                                              phenol-blocked.
P-12-0033..................................      04/03/2012      03/13/2012  (S) Benzoic acid, 4-(1,1-
                                                                              dimethylethyl)-, methyl.
P-12-0035..................................      03/27/2012      03/25/2012  (G) Cobalt iron manganese oxide,
                                                                              carboxylic acid-modified.
P-12-0060..................................      03/29/2012      03/23/2012  (S) 2-propenoic acid, sodium salt,
                                                                              reaction products with 1,3-bis(1-
                                                                              chloro-1-methylethyl)benzene and
                                                                              butadiene-isobutylene polymer.
P-12-0073..................................      04/06/2012      04/02/2012  (G) Castor oil, polymer with
                                                                              hydrogenated vegetable oil, 1,1'-
                                                                              methylenebis[isocyanatobenzene]
                                                                              and isocynate.
P-12-0076..................................      03/24/2012      02/28/2012  (G) Halide salt of alkyl-
                                                                              substituted nitrogen heterocycle.
----------------------------------------------------------------------------------------------------------------

    If you are interested in information that is not included in these 
tables, you may contact EPA as described in Unit II. to access 
additional non-CBI information that may be available.

List of Subjects

    Environmental protection, Chemicals, Hazardous substances, Imports, 
Notice of commencement, Premanufacturer, Reporting and recordkeeping 
requirements, Test marketing exemptions.

    Dated: April 17, 2012.
 Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.
[FR Doc. 2012-9919 Filed 4-24-12; 8:45 am]
BILLING CODE 6560-50-P