[Federal Register Volume 77, Number 47 (Friday, March 9, 2012)]
[Notices]
[Pages 14445-14446]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2012-5749]
-----------------------------------------------------------------------
NUCLEAR REGULATORY COMMISSION
Application for a License To Export Steel Forging
Pursuant to 10 CFR 110.70(b) ``Public Notice of Receipt of an
Application,'' please take notice that the Nuclear Regulatory
Commission (NRC) has received the following request for an export
license. Copies of the request are available electronically through
ADAMS and can be accessed through the Public Electronic Reading Room
(PERR) link http://www.nrc.gov/reading-rm.html at the NRC Homepage.
A request for a hearing or petition for leave to intervene may be
filed within thirty days after publication of this notice in the
Federal Register. Any request for hearing or petition for leave to
intervene shall be served by the requestor or petitioner upon the
applicant, the office of the General Counsel, U.S. Nuclear Regulatory
Commission, Washington, DC 20555; the Secretary, U.S. Nuclear
Regulatory Commission, Washington, DC 20555; and the Executive
Secretary, U.S. Department of State, Washington, DC 20520.
A request for a hearing or petition for leave to intervene may be
filed with the NRC electronically in accordance with NRC's E-Filing
rule promulgated in August 2007, 72 FR 49139 (Aug. 28, 2007).
Information about filing electronically is available on the NRC's
public Web site at http://www.nrc.gov/site-help/e-submittals.html. To
ensure timely electronic filing, at least 5 (five) days prior to the
filing deadline, the petitioner/requestor should contact the Office of
the Secretary by email at [email protected], or by calling (301)
415-1677, to request a digital ID certificate and allow for the
creation of an electronic docket.
In addition to a request for hearing or petition for leave to
intervene, written comments, in accordance with 10 CFR 110.81, should
be submitted within thirty (30) days after publication of this notice
in the Federal Register to Office of the Secretary, U.S. Nuclear
Regulatory Commission, Washington, DC 20555, Attention: Rulemaking and
Adjudications.
The information concerning this application for an export license
follows.
[[Page 14446]]
NRC Export License Application
[Description of material]
----------------------------------------------------------------------------------------------------------------
Name of applicant Date of
application Date received Material type Total quantity End use Destination
Application No. Docket No.
----------------------------------------------------------------------------------------------------------------
FirstEnergy Nuclear Operating Co Reactor vessel One................ The reactor vessel Spain.
December 15, 2011............... head steel head steel
February 7, 2012................ forging. forging will be
XR175........................... machined into the
11005983........................ finished vessel
head at ENSA
Equipos
Nucleares, S.A.
in Spain, for use
in Beaver Valley
(Unit 2) Power
Station,
Shippingport, PA.
----------------------------------------------------------------------------------------------------------------
Dated this 2nd day of March 2012 at Rockville, Maryland.
For the Nuclear Regulatory Commission.
Stephen Dembek,
Acting Deputy Director, Office of International Programs.
[FR Doc. 2012-5749 Filed 3-8-12; 8:45 am]
BILLING CODE 7590-01-P