[Federal Register Volume 77, Number 21 (Wednesday, February 1, 2012)]
[Notices]
[Pages 5092-5096]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2012-1922]



[[Page 5091]]

Vol. 77

Wednesday,

No. 21

February 1, 2012

Part II





Environmental Protection Agency





-----------------------------------------------------------------------





Certain New Chemicals; Receipt and Status Information; Notice

  Federal Register / Vol. 77 , No. 21 / Wednesday, February 1, 2012 / 
Notices  

[[Page 5092]]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2011-0992; FRL-9331-9]


Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires 
any person who intends to manufacture (defined by statute to include 
import) a new chemical (i.e., a chemical not on the TSCA Chemical 
Substances Inventory (TSCA Inventory)) to notify EPA and comply with 
the statutory provisions pertaining to the manufacture of new 
chemicals. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to 
publish in the Federal Register a notice of receipt of a premanufacture 
notice (PMN) or an application for a test marketing exemption (TME), 
and to publish in the Federal Register periodic status reports on the 
new chemicals under review and the receipt of notices of commencement 
(NOC) to manufacture those chemicals. This document, which covers the 
period from November 1, 2011 to December 2, 2011, and provides the 
required notice and status report, consists of the PMNs and TME, both 
pending or expired, and the NOC to manufacture a new chemical that the 
Agency has received under TSCA section 5 during this time period.

DATES: Comments identified by the specific PMN number or TME number, 
must be received on or before March 2, 2012.

ADDRESSES: Submit your comments, identified by docket identification 
(ID) number EPA-HQ-OPPT-2011-0992, and the specific PMN number or TME 
number for the chemical related to your comment, by one of the 
following methods:
     Federal eRulemaking Portal: http://www.regulations.gov. 
Follow the on-line instructions for submitting comments.
     Mail: Document Control Office (7407M), Office of Pollution 
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 
Pennsylvania Ave. NW., Washington, DC 20460-0001.
     Hand Delivery: OPPT Document Control Office (DCO), EPA 
East Bldg., Rm. 6428, 1201 Constitution Ave. NW., Washington, DC. The 
DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding 
legal holidays. The telephone number for the DCO is (202) 564-8930. 
Such deliveries are only accepted during the DCO's normal hours of 
operation, and special arrangements should be made for deliveries of 
boxed information.
    Instructions: EPA's policy is that all comments received will be 
included in the docket without change and may be made available on-line 
at http://www.regulations.gov, including any personal information 
provided, unless the comment includes information claimed to be 
Confidential Business Information (CBI) or other information whose 
disclosure is restricted by statute. Do not submit information that you 
consider to be CBI or otherwise protected through regulations.gov or 
email. The regulations.gov Web site is an ``anonymous access'' system, 
which means EPA will not know your identity or contact information 
unless you provide it in the body of your comment. If you send an email 
comment directly to EPA without going through regulations.gov, your 
email address will be automatically captured and included as part of 
the comment that is placed in the docket and made available on the 
Internet. If you submit an electronic comment, EPA recommends that you 
include your name and other contact information in the body of your 
comment and with any disk or CD-ROM you submit. If EPA cannot read your 
comment due to technical difficulties and cannot contact you for 
clarification, EPA may not be able to consider your comment. Electronic 
files should avoid the use of special characters, any form of 
encryption, and be free of any defects or viruses.
    Docket: All documents in the docket are listed in the docket index 
available at http://www.regulations.gov. Although listed in the index, 
some information is not publicly available, e.g., CBI or other 
information whose disclosure is restricted by statute. Certain other 
material, such as copyrighted material, will be publicly available only 
in hard copy. Publicly available docket materials are available 
electronically at http://www.regulations.gov, or, if only available in 
hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA 
Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution 
Ave. NW., Washington, DC. The EPA/DC Public Reading Room hours of 
operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding 
legal holidays. The telephone number of the EPA/DC Public Reading Room 
is (202) 566-1744, and the telephone number for the OPPT Docket is 
(202) 566-0280. Docket visitors are required to show photographic 
identification, pass through a metal detector, and sign the EPA visitor 
log. All visitor bags are processed through an X-ray machine and 
subject to search. Visitors will be provided an EPA/DC badge that must 
be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT: For technical information contact: 
Bernice Mudd, Information Management Division (7407M), Office of 
Pollution Prevention and Toxics, Environmental Protection Agency, 1200 
Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: 
(202) 564-8951; fax number: (202) 564-8955; e-mail address: 
[email protected].
    For general information contact: The TSCA-Hotline, ABVI-Goodwill, 
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 
554-1404; email address: [email protected].

SUPPLEMENTARY INFORMATION: 

I. General Information

A. Does this action apply to me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitter of the PMNs addressed in this action. 
If you have any questions regarding the applicability of this action to 
a particular entity, consult the person listed under FOR FURTHER 
INFORMATION CONTACT.

B. What should I consider as I prepare my comments for EPA?

    1. Submitting CBI. Do not submit this information to EPA through 
regulations.gov or e-mail. Clearly mark the part or all of the 
information that you claim to be CBI. For CBI information in a disk or 
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as 
CBI and then identify electronically within the disk or CD-ROM the 
specific information that is claimed as CBI. In addition to one 
complete version of the comment that includes information claimed as 
CBI, a copy of the comment that does not contain the information 
claimed as CBI must be submitted for inclusion in the public docket. 
Information so marked will not be disclosed except in accordance with 
procedures set forth in 40 CFR part 2.
    2. Tips for preparing your comments. When submitting comments, 
remember to:
    i. Identify the document by docket ID number and other identifying 
information (subject heading, Federal Register date and page number).
    ii. Follow directions. The Agency may ask you to respond to 
specific questions or organize comments by referencing a

[[Page 5093]]

Code of Federal Regulations (CFR) part or section number.
    iii. Explain why you agree or disagree; suggest alternatives and 
substitute language for your requested changes.
    iv. Describe any assumptions and provide any technical information 
and/or data that you used.
    v. If you estimate potential costs or burdens, explain how you 
arrived at your estimate in sufficient detail to allow for it to be 
reproduced.
    vi. Provide specific examples to illustrate your concerns and 
suggest alternatives.
    vii. Explain your views as clearly as possible, avoiding the use of 
profanity or personal threats.
    viii. Make sure to submit your comments by the comment period 
deadline identified.

II. Why is EPA taking this action?

    EPA classifies a chemical substance as either an ``existing'' 
chemical or a ``new'' chemical. Any chemical substance that is not on 
EPA's TSCA Inventory is classified as a ``new chemical,'' while those 
that are on the TSCA Inventory are classified as an ``existing 
chemical.'' For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to 
manufacture or import a new chemical substance for a non-exempt 
commercial purpose is required by TSCA section 5 to provide EPA with a 
PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes 
EPA to allow persons, upon application, to manufacture (includes 
import) or process a new chemical substance, or a chemical substance 
subject to a significant new use rule (SNUR) issued under TSCA section 
5(a), for ``test marketing'' purposes, which is referred to as a test 
marketing exemption, or TME. For more information about the 
requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems.
    Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish 
in the Federal Register a notice of receipt of a PMN or an application 
for a TME and to publish in the Federal Register periodic status 
reports on the new chemicals under review and the receipt of NOCs to 
manufacture those chemicals. This status report, which covers the 
period from November 1, 2011 to December 2, 2011, consists of the PMNs 
and TME, both pending or expired, and the NOCs to manufacture a new 
chemical that the Agency has received under TSCA section 5 during this 
time period.

III. Receipt and Status Reports

    In Table I. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the PMNs 
received by EPA during this period: The EPA case number assigned to the 
PMN, the date the PMN was received by EPA, the projected end date for 
EPA's review of the PMN, the submitting manufacturer/importer, the 
potential uses identified by the manufacturer/importer in the PMN, and 
the chemical identity.

                                           Table I--43 PMNs Received From November 1, 2011 to December 2, 2011
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                           Projected
       Case No.          Received Date    Notice End      Manufacturer/Importer                Use                               Chemical
                                             Date
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-12-0040.............      11/01/2011      01/29/2012  Essential Industries....  (S) A polymer in printing      (S) Hexanedioic acid, polymer with 2,2-
                                                                                   applications; a polymer for    dimethyl-1,3-propanediol,
                                                                                   pigment and or ink             diethylamine, 1,2-etahne diamine, 3-
                                                                                   dispersions.                   hydroxy-2-(hydroxymethyl)-2-methyl
                                                                                                                  propanoic acid and 1,1'-methylenebis[4-
                                                                                                                  isocyanatocyclohexane], compd. with
                                                                                                                  n,n-diethylethanamine
P-12-0041.............      11/01/2011      01/29/2012  Zydex Industries........  (S) Waterproofing inorganic    (G) Silane quats.
                                                                                   substrates. trade name
                                                                                   zycosil; asphalt binder
                                                                                   modifier. Trade name
                                                                                   Zycosoil and Nanotac;
                                                                                   waterproofing of soil.
P-12-0042.............      11/01/2011      01/29/2012  Clariant Corporation....  (G) A component in leather     (G) Polyurethane aqueous dispersion.
                                                                                   finishing formulations.
P-12-0043.............      11/03/2011      01/31/2012  CBI.....................  (G) Additive, open, non-       (G) 2-(dimethylamino)ethyl methyl-2-
                                                                                   dispersive use.                propanoate, polymer with alkyl-
                                                                                                                  substituted methyl-2-propanoate, salt
                                                                                                                  with mono(alkyl-substituted
                                                                                                                  polyalkoxyether)butanedioates.
P-12-0044.............      11/04/2011      02/01/2012  CBI.....................  (G) This product has utility   (G) Multi-wall carbon nanotubes.
                                                                                   as an intermediate for
                                                                                   formulation in industrial
                                                                                   and manufacturing uses in a
                                                                                   wide range of polymers and
                                                                                   materials including rubber,
                                                                                   thermoplatics, engineered
                                                                                   plastics, cement, latexes,
                                                                                   ceramics, photovoltaic
                                                                                   materials, capacitor
                                                                                   materials, battery
                                                                                   materials, and electrostatic
                                                                                   and heat transfer coatings.
P-12-0045.............      11/04/2011      02/01/2012  CBI.....................  (G) Additive, open, non-       (G) Epoxy resin, reaction product with
                                                                                   dispersive use.                amines.
P-12-0046.............      11/08/2011      02/05/2012  CBI.....................  (G) Silicone antifoam........  (G) Aryl functional silicone.
P-12-0047.............      11/08/2011      02/05/2012  Eastman Kodak Company...  (S) Use as a chemical          (S) Benzoic acid, 4-(1,3-dihydro-1,3-
                                                                                   intermediate..                 dioxo-2h-isoindol-2-yl)-2-hydroxy-,
                                                                                                                  methyl ester.

[[Page 5094]]

 
P-12-0048.............      11/08/2011      02/05/2012  CBI.....................  (S) Additive for electrolyte   (G) Dioxolane fluoropropoxymethyl.
                                                                                   mixtures for batteries and
                                                                                   other electrical and other
                                                                                   electronic devices.
P-12-0049.............      11/08/2011      02/05/2012  Marshallton Research      (G) Waste remediation........  (G) Alkylcatechol-substituted alkoxy-
                                                         Laboratories, Inc..                                      substituted calixarene.
P-12-0050.............      11/09/2011      02/06/2012  Indulor America, L......  (G) Optical brightener.......  (G) Sulfonated stilbene derivative.
P-12-0051.............      11/10/2011      02/07/2012  CBI.....................  (G) Polymer foam additive....  (G) Substituted alkylamide.
P-12-0052.............      11/10/2011      02/07/2012  CBI.....................  (G) Polymer foam additive....  (G) Substituted alkylamide.
P-12-0053.............      11/10/2011      02/07/2012  CBI.....................  (G) Chemical intermediate....  (G) Substituted alkylester.
P-12-0054.............      11/17/2011      02/14/2012  CBI.....................  (S) Ultraviolet curable        (G) Urethane acrylate.
                                                                                   polymer for clear coatings
                                                                                   for wood, plastic and metal.
P-12-0055.............      11/17/2011      02/14/2012  CBI.....................  (G) Foam stabilizer and        (G) Partially fluorinated acrylic
                                                                                   coating additive.              copolymer.
P-12-0056.............      11/18/2011      02/15/2012  CBI.....................  (G) Component of coatings....  (G) Isocyanate polymer, alcohol-
                                                                                                                  blocked.
P-12-0057.............      11/18/2011      02/15/2012  CBI.....................  (G) Component of coatings....  (G) Hydroxyalkenoate, polymer with
                                                                                                                  isocyanate and diglycol, alcohol-
                                                                                                                  blocked.
P-12-0058.............      11/18/2011      02/15/2012  Innovative Science        (S) Placticizer for polyvinyl  (S) Waste plastics, poly(ethylene
                                                         Technology.               chloride resin.                terephthalate), depolymented with by-
                                                                                                                  products from manuf. of 2-
                                                                                                                  butoxyethanol, and isotridecanol,
                                                                                                                  ethylene glycol-free fraction.
P-12-0059.............      11/21/2011      02/18/2012  CBI.....................  (S) Binder for metal coatings  (G) Epoxy urethane.
P-12-0060.............      11/23/2011      02/20/2012  Henkel Corporation......  (S) A polymerizable component  (S) 2-propenoic acid, sodium salt,
                                                                                   in novel adhesive/sealant      reaction products with 1,3-bis(1-
                                                                                   formulations.                  chloro-1-methylethyl)benzene and
                                                                                                                  butadiene-isobutylene polymer.
P-12-0061.............      11/23/2011      02/20/2012  CBI.....................  (G) Ink vehicle..............  (G) Modified acrylic copolymer.
P-12-0062.............      11/23/2011      02/20/2012  CBI.....................  (G) Sealants and adhesives...  (G) Dimethylalkoxylated
                                                                                                                  polydimethylsiloxane and methoxy
                                                                                                                  functional silica.
P-12-0063.............      11/24/2011      02/21/2012  CBI.....................  (G) Sealants and adhesives...  (G) Acryloxy functional siloxane.
P-12-0064.............      11/23/2011      02/20/2012  CBI.....................  (G) Pmn substance used as an   (G) Green line emitting phosphor.
                                                                                   illuminating phosphor.
P-12-0065.............      11/25/2011      02/22/2012  Western Iowa Energy.....  (G) Petrochemical replacement  (S) Fatty acids, animal, me esters.
P-12-0066.............      11/25/2011      02/22/2012  Western Iowa Energy.....  (G) Petrochemical replacement  (S) Fatty acids, cooking oil wastes, me
                                                                                                                  esters.
P-12-0067.............      11/25/2011      02/22/2012  Western Iowa Energy.....  (G) Petrochemical replacement  (S) Fatty acids, poultry, me esters.
P-12-0068.............      11/28/2011      02/25/2012  CBI.....................  (G) Open, non-dispersive       (G) Modified fluorinated urethane.
                                                                                   textile finish.
P-12-0069.............      11/15/2011      02/12/2012  CBI.....................  (G) Lubricity additive.......  (G) Fatty acids compounds with
                                                                                                                  cyclohexanamine.
P-12-0070.............      11/15/2011      02/26/2012  CBI.....................  (G) Lubricity additive.......  (G) Fatty acids compounds with
                                                                                                                  butanamine.
P-12-0071.............      11/11/2011      02/08/2012  CBI.....................  (S) Used as a food additive;   (S) Disphosphoric acid, magnesium salt
                                                                                   foaming agent used in the      (1:1).
                                                                                   manufacture of plastic parts.
P-12-0072.............      11/29/2011      02/26/2012  Corsitech...............  (G) Clay and shale formation   (G) Quaternary ammonium compound.
                                                                                   stabilizer in well
                                                                                   stimulation and drilling mud
                                                                                   formulations.
P-12-0073.............      11/29/2011      02/26/2012  H.B. Fuller Company.....  (G) Industrial adhesive......  (G) Castor oil, polymer with
                                                                                                                  hydrogenated vegetable oil, 1,1'-
                                                                                                                  methylenebis[isocyanatobenzene] and
                                                                                                                  isocynate.
P-12-0074.............      11/29/2011      02/26/2012  CBI.....................  (G) Intermediate for           (G) Halogenated substituted alkane,
                                                                                   lubricating oil.               potassium salt.
P-12-0075.............      11/29/2011      02/26/2012  CBI.....................  (G) Intermediate for           (G) Halogenated substituted alkane,
                                                                                   lubricating oil.               potassium salt.
P-12-0076.............      11/29/2011      02/26/2012  CBI.....................  (G) Intermediate for           (G) Halide salt of alkyl-substituted
                                                                                   lubricating oil.               nitrogen heterocycle.
P-12-0077.............      11/29/2011      02/26/2012  CBI.....................  (G) Lubricating oil..........  (G) Salt of alkyl-substituted nitrogen
                                                                                                                  heterocycle.
P-12-0078.............      11/29/2011      02/26/2012  CBI.....................  (G) Polymer additive.........  (S) 1-octanesulfonic acid,
                                                                                                                  3,3,4,4,5,5,6,6,7,7,8,8,8-
                                                                                                                  tridecafluoro-, barium salt (2:1).

[[Page 5095]]

 
P-12-0079.............      11/29/2011      02/26/2012  CBI.....................  (G) Polymerization aid.......  (S) 1-octanesulfonic acid,
                                                                                                                  3,3,4,4,5,5,6,6,7,7,8,8,8-
                                                                                                                  tridecafluoro-, potassium salt (1:1).
P-12-0080.............      11/29/2011      02/26/2012  CBI.....................  (S) Paint or coating           (G) Fluoroethylene-vinylether
                                                                                   component.                     copolymer.
P-12-0081.............      11/29/2011      02/26/2012  Icx Agentase............  (G) The PMN substance is used  (G) Aromatic substituted
                                                                                   in liquid and polymer-based    isobenzofuranone.
                                                                                   sensors that change color in
                                                                                   the presence of hazardous
                                                                                   chemical contamination
                                                                                   (chemical weapons).
P-12-0082.............      11/30/2011      02/27/2012  Tk Holdings, Inc........  (S) Fuel for gas generant in   (S) Benzoic acid, 2-hydroxy-3,5-dinitro-
                                                                                   automotive air bag inflators.  , ammonium salt (1:1).
--------------------------------------------------------------------------------------------------------------------------------------------------------

    In Table II of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the TMEs 
received by EPA during this period: The EPA case number assigned to the 
TME, the date the TME was received by EPA, the projected end date for 
EPA's review of the TME, the submitting manufacturer/importer, the 
potential uses identified by the manufacturer/importer in the TME, and 
the chemical identity.

                                           Table II-1--TME Received From November 1, 2011 to December 2, 2011
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                           Projected
       Case No.          Received date    notice end     Manufacturer/ Importer                Use                               Chemical
                                             date
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-12-0003.............      11/18/2011      01/01/2012  Innovative science        (S) Plasticizer for polyvinyl  (S) Carboxylic acids. di-, c4-6,
                                                         technology.               chloride resin.                polymers with ethylene glycol and 2-(2-
                                                                                                                  phenoxyethoxy) ethanol
--------------------------------------------------------------------------------------------------------------------------------------------------------

    In Table III. of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the NOCs 
received by EPA during this period: The EPA case number assigned to the 
NOC, the date the NOC was received by EPA, the projected end date for 
EPA's review of the NOC, and chemical identity.

                      Table III--37 NOCs Received From November 1, 2011 to December 2, 2011
----------------------------------------------------------------------------------------------------------------
                                                              Commencement
                  Case No.                    Received date    notice end                  Chemical
                                                                  date
----------------------------------------------------------------------------------------------------------------
P-95-1949..................................      11/01/2011      06/27/1997  (G) Aromatic dianhydride and
                                                                              aliphatic esters, compound with
                                                                              aromatic diamines.
P-07-0554..................................      11/10/2011      10/18/2011  (G) Fatty acid ester, alcohol
                                                                              alkoxylate.
P-10-0273..................................      11/02/2011      09/30/2011  (G) Perfluoroalkylethyl
                                                                              methacrylate copolymer.
P-10-0290..................................      11/29/2011      10/17/2011  (G) Methacrylate terminated
                                                                              polyester.
P-10-0464..................................      11/04/2011      11/01/2011  (S) 9-octadecenoic acid, 2-
                                                                              ethylhexyl ester, (9e).
P-10-0465..................................      11/04/2011      11/01/2011  (S) 9-octadecenoic acid (9z)-,
                                                                              dimer, 2-ethylhexyl ester,
                                                                              isomerized.
P-10-0466..................................      11/04/2011      11/01/2011  (S) 9-octadecenoic acid (9z)-,
                                                                              homopolymer, 2-ethylhexyl ester,
                                                                              isomerized.
P-10-0566..................................      11/17/2011      10/26/2011  (S) Benzoic acid, 2-hydroxy-,
                                                                              reaction products with
                                                                              triethylenetetramine.
P-11-0033..................................      11/17/2011      10/26/2011  (S) Formaldehyde, polymer with 4-
                                                                              (1,1-dimethylethyl)phenol,
                                                                              reactions products with 1-
                                                                              piperazineethanamine.
P-11-0034..................................      11/17/2011      10/26/2011  (S) Formaldehyde, polymer with
                                                                              .alpha.-(2-aminomethylethyl)-
                                                                              .omega.-(2-
                                                                              aminomethylethoxy]poly[oxy(methyl-
                                                                              1,2-ethandiyl)] and 4-(1,1-
                                                                              dimethylethyl)phenol.
P-11-0042..................................      11/17/2011      10/26/2011  (S) 1,2-ethanediamine, N1,N2-bis(2-
                                                                              aminoethyl)-, reaction products
                                                                              with bu glycidyl ether.
P-11-0050..................................      11/23/2011      11/01/2011  (G) Organic-n,p-compound.
P-11-0059..................................      11/09/2011      11/01/2011  (G) Trialkylsilyl acrylate
                                                                              copolymer.
P-11-0174..................................      11/28/2011      11/03/2011  (G) Polyurethane dispersion in
                                                                              water.
P-11-0201..................................      11/04/2011      11/01/2011  (S) Fatty acids, C8	18 and C18-
                                                                              unsaturated., reaction products
                                                                              with isomerized oleic acid
                                                                              homopolymer.
P-11-0202..................................      11/04/2011      11/01/2011  (S) Fatty acids, coco, reaction
                                                                              products with isomerized oleic
                                                                              acid homopolymer.
P-11-0208..................................      11/04/2011      11/01/2011  (S) Fatty acids, C8	18 and C18-
                                                                              unsaturated., reaction products
                                                                              with isomerized oleic acid
                                                                              homopolymer 2-ethylhexyl ester.
P-11-0209..................................      11/04/2011      11/01/2011  (S) Fatty acids, coco, reaction
                                                                              products with isomerized oleic
                                                                              acid homopolymer 2-ethylhexyl
                                                                              ester.
P-11-0210..................................      11/04/2011      11/01/2011  (S) Fatty acids, C8	18 and C18-
                                                                              unsaturated., reaction products
                                                                              with isomerized oleic acid dimer 2-
                                                                              ethylhexyl ester.

[[Page 5096]]

 
P-11-0211..................................      11/04/2011      11/01/2011  (S) Fatty acids, coco, reaction
                                                                              products with isomerized oleic
                                                                              acid dimer 2-ethylhexyl ester.
P-11-0212..................................      11/04/2011      11/01/2011  (S) 9-octadecenoic acid (9z)-,
                                                                              homopolymer, isomerized.
P-11-0234..................................      11/21/2011      11/09/2011  (G) Oligmeric phenolic ether.
P-11-0316..................................      11/29/2011      11/28/2011  (S) Cyclohexane, oxidized, by-
                                                                              products from, distillation
                                                                              residues.
P-11-0333..................................      11/03/2011      10/06/2011  (G) Phosphated polyester.
P-11-0340..................................      11/17/2011      10/26/2011  (G) Formaldehyde polymer with
                                                                              reaction products of alkylated
                                                                              phenol and polyalkyltriamine.
P-11-0360..................................      11/03/2011      10/23/2011  (G) Quaternized polyvinylimidazole.
P-11-0383..................................      11/29/2011      11/24/2011  (G) Calcium alkyl salicylate.
P-11-0415..................................      11/21/2011      10/28/2011  (G) Hydrogenated tallow alkyl amine
                                                                              polymer with substituted siloxanes
                                                                              and substituted glycol ether salt.
P-11-0445..................................      11/02/2011      10/17/2011  (G) Polyalkyacrylate copolymer.
P-11-0468..................................      11/08/2011      11/03/2011  (G) Polyether amine derivative.
P-11-0473..................................      11/07/2011      11/02/2011  (S) Boron,
                                                                              trifluoro(tetrahydrofuran)-, (t-4)-
                                                                              , polymer with .alpha.-hydro-
                                                                              .omega.-hydroxypoly(oxy-1,2-
                                                                              ethanediyl) and 3-methyl-3-
                                                                              [(2,2,3,3,3-
                                                                              pentafluoropropoxy)methyl]oxetane.
P-11-0475..................................      11/15/2011      10/14/2011  (G) Alkylidene bisphenol, polymer
                                                                              with 2-(chloromethyl)oxirane,
                                                                              alkyl-oxo-2-propen-1-yl)oxy]alkyl
                                                                              4-cycloalkene-1,2-dicarboxylate.
P-11-0477..................................      11/01/2011      10/17/2011  (G) Dicarboxylic acid, compd. with
                                                                              1,6-hexanediamine alkyldioate,
                                                                              homopolymer.
P-11-0504..................................      11/25/2011      11/11/2011  (G) Ultra violet curable
                                                                              polyurethane acrylate.
P-11-0564..................................      11/16/2011      11/14/2011  (S) D-glucopyranose, oligomeric,
                                                                              c10-16-alkyl decyl octyl
                                                                              glycosides, 3-
                                                                              [(carboxymethyl)bis(2-
                                                                              hydroxyethyl)ammonio]-2-
                                                                              hydroxypropyl ethers, inner salts,
                                                                              polymers with 1,3-dichloro-2-
                                                                              propanol.
P-11-0572..................................      11/21/2011      11/15/2011  (S) 1,4-cyclohexanedimethanol,
                                                                              polymer with 2-hydroxymethylethyl-
                                                                              terminated polybutadiene and 1,1'-
                                                                              methylenebis[4-isocyanatobenzene],
                                                                              C>14 alcs.-blocked.
P-11-0596..................................      11/22/2011      11/21/2011  (G) Hexanedioic acid, compd. with
                                                                              polyalkylenepolyamine.
----------------------------------------------------------------------------------------------------------------

    If you are interested in information that is not included in these 
tables, you may contact EPA as described in Unit II. to access 
additional non-CBI information that may be available.

List of Subjects

    Environmental protection, Chemicals, Hazardous substances, Imports, 
Notice of commencement, Premanufacturer, Reporting and recordkeeping 
requirements, Test marketing exemptions.

    Dated: January 3, 2012.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.
[FR Doc. 2012-1922 Filed 1-31-12; 8:45 am]
BILLING CODE 6560-50-P