[Federal Register Volume 77, Number 9 (Friday, January 13, 2012)]
[Notices]
[Pages 2032-2036]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2012-613]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[A-580-836]


Certain Cut-to-Length Carbon-Quality Steel Plate Products From 
the Republic of Korea: Preliminary Results of Antidumping Duty 
Administrative Review

AGENCY: Import Administration, International Trade Administration, 
Department of Commerce.
SUMMARY: In response to a request by an interested party, the 
Department of Commerce (the Department) is conducting an administrative 
review of the antidumping duty order on certain cut-to-length carbon-
quality steel plate products (steel plate) from the Republic of Korea 
(Korea). This review covers one producer/exporter of the subject 
merchandise, Dongkuk Steel Mill Co., Ltd. (DSM). The period of review 
(POR) is February 1, 2010, through January 31, 2011.
    The Department has preliminarily determined that DSM made U.S. 
sales at prices less than normal value. If these preliminary results 
are adopted in our final results of administrative review, we will 
instruct U.S. Customs and Border Protection (CBP) to assess antidumping 
duties on all appropriate entries. Interested parties are invited to 
comment on these preliminary results of review. We intend to issue the 
final results of review no later than 120 days from the publication 
date of this notice.

DATES: Effective Date: January 13, 2012.

FOR FURTHER INFORMATION CONTACT: Yang Jin Chun, AD/CVD Operations, 
Office 1, Import Administration, International Trade Administration, 
U.S. Department of Commerce, 14th Street and Constitution Avenue NW., 
Washington, DC 20230, telephone: (202) 482-5760.

SUPPLEMENTARY INFORMATION: 

Background

    On February 10, 2000, the Department published in the Federal 
Register an antidumping duty order on steel plate from Korea. See 
Notice of Amendment of Final Determinations of Sales at Less Than Fair 
Value and Antidumping Duty Orders: Certain Cut-To-Length Carbon-Quality 
Steel Plate Products From France, India, Indonesia, Italy, Japan and 
the Republic of Korea, 65 FR 6585 (February 10, 2000). On February 1, 
2011, the Department published in the Federal Register a notice of 
opportunity to request administrative review of the order. See 
Antidumping or Countervailing Duty Order, Finding, or Suspended 
Investigation; Opportunity to Request Administrative Review, 76 FR 5559 
(February 1, 2011).
    On February 25, 2011, in accordance with 19 CFR 351.213(b)(2), DSM 
requested that the Department conduct an administrative review of its 
sales and entries of subject merchandise into the United States during 
the POR. On March 31, 2011, the Department initiated an administrative 
review of DSM. See Initiation of Antidumping Duty Administrative 
Reviews, Requests for Revocation in Part, and Deferral of 
Administrative Review, 76 FR 17825 (March 31, 2011).
    The Department is conducting this administrative review in 
accordance with section 751 of the Tariff Act of 1930, as amended (the 
Act).

Scope of the Order

    The products covered by the antidumping duty order are certain hot-
rolled carbon-quality steel: (1) Universal mill plates (i.e., flat-
rolled products rolled on four faces or in a closed box pass, of a 
width exceeding 150 mm but not exceeding 1250 mm, and of a nominal or 
actual thickness of not less than 4 mm, which are cut-to length (not in 
coils) and without patterns in relief), of iron or non-alloy quality 
steel; and (2) flat-rolled products, hot-rolled, of a nominal or actual 
thickness of 4.75 mm or more and of a width which exceeds 150 mm and 
measures at least twice the thickness, and which are cut-to-length (not 
in coils). Steel products included in the scope of the order are of 
rectangular, square, circular, or other shape and of rectangular or 
non-rectangular cross section where such non-rectangular cross-section 
is achieved subsequent to the rolling process (i.e., products which 
have been ``worked after rolling'')--for example, products which have 
been beveled or rounded at the edges. Steel products that meet the 
noted physical characteristics that are painted, varnished, or coated 
with plastic or other non-metallic substances are included within the 
scope. Also, specifically included in the scope of the order are high 
strength, low alloy (HSLA) steels. HSLA steels are recognized as steels 
with micro-alloying levels of elements such as chromium, copper, 
niobium, titanium, vanadium, and molybdenum. Steel products included in 
the scope, regardless of Harmonized Tariff Schedule of the United 
States (HTSUS) definitions, are products in which: (1) Iron 
predominates, by weight, over each of the other contained elements, (2) 
the carbon content is two percent or less, by weight, and (3) none of 
the elements listed below is equal to or exceeds the quantity, by 
weight, respectively indicated: 1.80 percent of manganese, or 1.50 
percent of silicon, or 1.00 percent of copper, or 0.50 percent of 
aluminum, or 1.25 percent of chromium, or 0.30 percent of cobalt, or 
0.40 percent of lead, or 1.25 percent of nickel, or 0.30 percent of 
tungsten, or 0.10 percent of molybdenum, or 0.10 percent of niobium, or 
0.41 percent of titanium, or 0.15 percent of vanadium, or 0.15 percent 
zirconium. All products that meet the written physical description, and 
in which the chemistry quantities do not equal or exceed any one of the 
levels listed above, are within the scope of the order unless otherwise 
specifically excluded. The following products are specifically excluded 
from the order: (1) Products clad, plated, or coated with metal, 
whether or not painted, varnished or coated with plastic or other non-
metallic substances; (2) SAE grades (formerly AISI grades) of

[[Page 2033]]

series 2300 and above; (3) products made to ASTM A710 and A736 or their 
proprietary equivalents; (4) abrasion-resistant steels (i.e., USS AR 
400, USS AR 500); (5) products made to ASTM A202, A225, A514 grade S, 
A517 grade S, or their proprietary equivalents; (6) ball bearing 
steels; (7) tool steels; and (8) silicon manganese steel or silicon 
electric steel.
    Imports of steel plate are currently classified in the HTSUS under 
subheadings 7208.40.30.30, 7208.40.30.60, 7208.51.00.30, 7208.51.00.45, 
7208.51.00.60, 7208.52.00.00, 7208.53.00.00, 7208.90.00.00, 
7210.70.30.00, 7210.90.90.00, 7211.13.00.00, 7211.14.00.30, 
7211.14.00.45, 7211.90.00.00, 7212.40.10.00, 7212.40.50.00, 
7212.50.00.00, 7225.40.30.50, 7225.40.70.00, 7225.50.60.00, 
7225.99.00.90, 7226.91.50.00, 7226.91.70.00, 7226.91.80.00, and 
7226.99.00.00. The HTSUS subheadings are provided for convenience and 
customs purposes. The written description of the merchandise covered by 
the order is dispositive.

Fair-Value Comparison

    To determine whether DSM's sales of the subject merchandise from 
Korea to the United States were at prices below normal value, we 
compared the constructed export price (CEP) to the normal value as 
described in the ``Constructed Export Price'' and ``Normal Value'' 
sections of this notice. Pursuant to section 777A(d)(2) of the Act, we 
compared the CEP of individual U.S. transactions to the monthly 
weighted-average normal value of the foreign like product where there 
were sales made in the ordinary course of trade.

Product Comparisons

    In accordance with section 771(16) of the Act, we considered all 
products covered by the ``scope of the order'' section above produced 
and sold by DSM in the comparison market during the POR to be foreign 
like product for the purposes of determining appropriate product 
comparisons to U.S. sales of subject merchandise. Specifically, we made 
comparisons to weighted-average comparison market prices that were 
based on all sales which passed the cost-of-production (COP) test of 
the identical product during the relevant or contemporary month. We 
calculated the weighted-average comparison market prices on a level of 
trade-specific basis.

Constructed Export Price

    The Department based the price of DSM's U.S. sales of subject 
merchandise on CEP, as defined in section 772(b) of the Act, because 
the merchandise was sold, before importation, by a U.S.-based seller 
affiliated with the producer to unaffiliated purchasers in the United 
States. In accordance with section 772(d)(1) of the Act, we calculated 
the CEP by deducting selling expenses associated with economic 
activities occurring in the United States, which includes direct 
selling expenses. In accordance with section 772(d)(1) of the Act, we 
also deducted those indirect selling expenses associated with economic 
activities occurring in the United States and the profit allocated to 
expenses deducted under section 772(d)(1) in accordance with sections 
772(d)(3) and 772(f) of the Act. In accordance with section 772(f) of 
the Act, we computed profit based on the total revenues realized on 
sales in both the U.S. and comparison markets, less all expenses 
associated with those sales. We then allocated profit to expenses 
incurred with respect to U.S. economic activity based on the ratio of 
total U.S. expenses to total expenses for both the U.S. and comparison 
markets.

Normal Value

A. Affiliation

    DSM made home market sales to Dongkuk S&C (DSC), which is a 
subsidiary of Dongkuk Industries Co., Ltd. (DKI). DKI owns 60 percent 
of DSC. DSM's Chairperson, Sae Joo Chang, and President, Sae Wook 
Chang, are brothers. DKI's Chairperson, Sang Kuhn Chang, is the father 
of DSC's President/Director, Sae Hee Chang. DKI's Chairperson, Sang 
Kuhn Chang, is also an uncle of DSM's Chairperson, Sae Joo Chang, and 
President, Sae Wook Chang. Together the Chang family grouping owns the 
largest block of the outstanding shares of DSM and DKI.
    Members of a family are affiliates pursuant to section 771(33)(A) 
of the Act and 19 CFR 351.102(b)(3). The definition of family includes 
uncle-nephew relationships under section 771(33)(A) of the Act. See 
Ferro Union, Inc. v. United States, 44 F. Supp. 2d 1310, 1325-26 (CIT 
1999). Two or more persons directly or indirectly controlling, 
controlled by, or under common control with any person are affiliates 
under section 771(33)(F) of the Act and 19 CFR 351.102(b)(3). In past 
reviews, the Department has found that DSM and DKI are affiliated. See, 
e.g., Certain Cut-to-Length Carbon-Quality Steel Plate Products From 
the Republic of Korea: Preliminary Results of Antidumping Duty 
Administrative Review, 73 FR 77614, 77615-16 (December 19, 2008) (2007-
08 Prelim), unchanged in Certain Cut-to-Length Carbon-Quality Steel 
Plate Products From the Republic of Korea: Final Results of Antidumping 
Duty Administrative Review, 74 FR 19046 (April 27, 2009) (2007-08 
Final). The U.S. Court of International Trade has upheld the 
Department's decision to find DSM and DKI affiliates in a separate 
review. See Dongkuk Steel Mill Co. v. United States, 29 CIT 724 (2005).
    Therefore, we preliminarily find that DKI's Chairperson, Sang Kuhn 
Chang, and DSM's Chairperson, Sae Joo Chang, and President, Sae Wook 
Chang, are affiliated under section 771(33)(A) of the Act and 19 CFR 
351.102(b)(3) because of their uncle-nephew relationship. We also 
preliminarily find that DSM, DKI, and DSC are affiliated under section 
771(33)(F) of the Act and 19 CFR 351.102(b)(3) because DSM, DKI, and 
DSC are under common control of the Chang family grouping. See the 
memorandum entitled ``Certain Cut-to-Length Carbon-Quality Steel Plate 
Products from the Republic of Korea: Affiliation of Dongkuk Steel Mill 
Co., Ltd., and Dongkuk Industries Co., Ltd.,'' dated January 9, 2012, 
for more details which contain DSM's business-proprietary information. 
Accordingly, we preliminarily treated DSM's home market sales to DSC as 
sales to an affiliated party and performed the arm's-length test for 
these sales. See the ``Arm's-Length Test'' section, infra.

B. Home Market Viability

    In accordance with section 773(a)(1)(c) of the Act, in order to 
determine whether there was a sufficient volume of sales of steel plate 
in the comparison market to serve as a viable basis for calculating the 
normal value, we compared the volume of the respondent's home market 
sales of the foreign like product to its volume of the U.S. sales of 
the subject merchandise. DSM's quantity of sales in the home market was 
greater than five percent of its sales to the U.S. market. Based on 
this comparison of the aggregate quantities sold in the comparison 
market, i.e., Korea, and to the United States and absent any 
information that a particular market situation in the exporting country 
did not permit a proper comparison, we preliminarily determine that the 
quantity of the foreign like product sold by the respondent in the 
exporting country was sufficient to permit a proper comparison with the 
sales of the subject merchandise to the United States. See section 
773(a)(1) of the Act. Thus, we determine that DSM's home market was 
viable during the POR. Id. Therefore, in accordance with section 
773(a)(1)(B)(i)

[[Page 2034]]

of the Act, we based normal value for the respondent on the prices at 
which the foreign like product was first sold for consumption in the 
exporting country in the usual commercial quantities and in the 
ordinary course of trade and, to the extent practicable, at the same 
level of trade as the U.S. sales.

C. Overrun Sales

    Section 773(a)(1)(B) of the Act provides that normal value shall be 
based on the price at which the foreign like product is first sold, 
inter alia, in the ordinary course of trade. Section 771(15) of the Act 
defines ``ordinary course of trade'' as the ``conditions and practices 
which, for a reasonable time prior to the exportation of the subject 
merchandise, have been normal in the trade under consideration with 
respect to merchandise of the same class or kind.''
    DSM reported home market sales of ``overrun'' merchandise, i.e., 
sales of products that failed to meet the original customer's order 
specifications because of differences in size, chemical components, 
and/or strength. In the past, the Department has examined various 
factors to determine whether ``overrun'' sales are in the ordinary 
course of trade. See China Steel Corp. v. United States, 264 F. Supp. 
2d. 1339, 1364-65 (CIT May 14, 2003). See also, e.g., 2007-08 Prelim, 
73 FR at 77616, unchanged in 2007-08 Final. The Department has the 
discretion to choose how best to analyze the many factors involved in 
determining whether sales are made within the ordinary course of trade. 
See Laclede Steel Co. v. United States, 19 CIT 1076, 1078 (1995). These 
factors include, but are not limited to, the following: (1) Whether the 
merchandise is ``off-quality'' or produced according to unusual 
specifications; (2) the comparative volume of sales and the number of 
buyers in the home market; (3) the average quantity of an overrun sale 
compared to the average quantity of a commercial sale; and (4) price 
and profit differentials in the home market.
    Based on our analysis of these factors and the terms of sale, we 
preliminarily determine that DSM's overrun sales are outside the 
ordinary course of trade. Because our analysis includes business-
proprietary information, the analysis is available in a separate 
decision memorandum. See the memorandum entitled ``Certain Cut-to-
Length Carbon-Quality Steel Plate Products from the Republic of Korea: 
Home Market Overruns'' dated January 9, 2012.

D. Cost-of-Production Analysis

    In the most recently completed administrative review, the 
Department determined that DSM sold the foreign like product at prices 
below the cost of producing the merchandise and, as a result, excluded 
such sales from the calculation of normal value. See 2007-08 Prelim, 73 
FR at 77616-17, unchanged in 2007-08 Final. Therefore, in this review, 
we have reasonable grounds to believe or suspect that DSM's sales of 
the foreign like product under consideration for the determination of 
normal value may have been made at prices below COP as provided by 
section 773(b)(2)(A)(ii) of the Act. Pursuant to section 773(b)(1) of 
the Act, we have conducted a COP investigation of DSM's sales in the 
comparison market.
1. Calculation of Cost of Production
    In accordance with section 773(b)(3) of the Act, we calculated the 
COP based on the sum of the costs of materials and labor employed in 
producing the foreign like product, the selling, general, and 
administrative expenses, and all costs and expenses incidental to 
packing the merchandise. In our COP analysis, we used the comparison 
market sales and COP information provided by DSM in its questionnaire 
response.
    We analyzed DSM's affiliated transactions in accordance with 
sections 773(f)(2) and (3) of the Act. During the POR, DSM purchased 
slabs, which are a major input in the production of steel plate, from 
its affiliates. Section 773(f)(3) of the Act (the major input rule) 
states:

    If, in the case of a transaction between affiliated persons 
involving the production by one of such persons of a major input to 
the merchandise, the administering authority has reasonable grounds 
to believe or suspect that an amount represented as the value of 
such input is less than the cost of production of such input, then 
the administering authority may determine the value of the major 
input on the basis of the information available regarding such cost 
of production, if such cost is greater than the amount that would be 
determined for such input under paragraph (2).

Paragraph 2 of section 773(f) of the Act (transactions disregarded) 
states:

    A transaction directly or indirectly between affiliated persons 
may be disregarded if, in the case of any element of value required 
to be considered, the amount representing that element does not 
fairly reflect the amount usually reflected in sales of merchandise 
under consideration in the market under consideration. If a 
transaction is disregarded under the preceding sentence and no other 
transactions are available for consideration, the determination of 
the amount shall be based on the information available as to what 
the amount would have been if the transaction had occurred between 
persons who are not affiliated.

    In accordance with the major input rule, and as stated in Stainless 
Steel Sheet and Strip in Coils From Mexico; Preliminary Results of 
Antidumping Duty Administrative Review, 73 FR 45708, 45714 (August 6, 
2008), unchanged in Stainless Steel Sheet and Strip in Coils from 
Mexico; Final Results of Antidumping Duty Administrative Review, 74 FR 
6365 (February 9, 2009), it is the Department's normal practice to use 
all three elements of the major input rule, i.e., transfer price, COP, 
and market price, where available. See, e.g., Purified 
Carboxymethylcellulose from the Netherlands; Preliminary Results of 
Antidumping Duty Administrative Review, 76 FR 36519, 36521-22 (June 22, 
2011), unchanged in Purified Carboxymethylcellulose From the 
Netherlands: Final Results of Antidumping Duty Administrative Review, 
76 FR 66687 (October 27, 2011). We adjusted DSM's cost of manufacturing 
to reflect the results of our analysis. See the DSM preliminary 
analysis memorandum dated January 9, 2012, for more details which 
contain DSM's business proprietary information.
    Based on our review of the record evidence, DSM did not appear to 
experience significant changes in the cost of manufacturing during the 
POR. Therefore, we followed our normal methodology of calculating an 
annual weighted-average cost.
2. Test of Comparison Market Prices
    After calculating the COP, in accordance with section 773(b)(1) of 
the Act, we tested whether comparison market sales of the foreign like 
product were made at prices below the COP within an extended period of 
time in substantial quantities and whether such prices permitted the 
recovery of all costs within a reasonable period of time. See section 
773(b)(2) of the Act. We compared model-specific COPs to the reported 
comparison market prices less any applicable movement charges, 
discounts, and rebates.
3. Results of the COP Test
    Pursuant to section 773(b)(2)(C) of the Act, when less than 20 
percent of DSM's sales of a given product were at prices less than the 
COP, we did not disregard any below-cost sales of that product because 
the below-cost sales were not made in substantial quantities within an 
extended period of time. When 20 percent or more of DSM's sales of a 
given product during the POR were at prices less than the COP, we 
disregarded the below-cost sales

[[Page 2035]]

because they were made in substantial quantities within an extended 
period of time pursuant to sections 773(b)(2)(B) and (C) of the Act and 
because, based on comparisons of prices to weighted-average COPs for 
the POR, we determined that these sales were at prices which would not 
permit recovery of all costs within a reasonable period of time in 
accordance with section 773(b)(2)(D) of the Act.
    In this review, we found that, for certain products, more than 20 
percent of DSM's home market sales were at prices less than COP and, in 
addition, such sales did not provide for the recovery of cost within a 
reasonable period of time. Therefore, we excluded these sales and used 
the remaining sales as the basis for determining normal value in 
accordance with section 773(b)(1) of the Act.

E. Arm's-Length Test

    The Department may calculate normal value based on a sale to an 
affiliated party only if it is satisfied that the price to the 
affiliated party is comparable to the price at which sales are made to 
parties not affiliated with the exporter or producer, i.e., sales at 
arm's-length prices. See 19 CFR 351.403(c). For affiliated-party sales, 
we excluded from our analysis sales to affiliated customers for 
consumption in the comparison market that we determined not to have 
been made at arm's-length prices. To test whether these sales were made 
at arm's-length prices, we compared the prices of sales of comparable 
merchandise to affiliated and unaffiliated customers, net of all 
rebates, movement charges, and direct selling expenses. Pursuant to 19 
CFR 351.403(c) and in accordance with our practice, when the prices 
charged to an affiliated party were, on average, between 98 and 102 
percent of the prices charged to unaffiliated parties for merchandise 
comparable to that sold to the affiliated party, we determined that the 
sales to the affiliated party were at arm's-length prices. See 
Antidumping Proceedings: Affiliated Party Sales in the Ordinary Course 
of Trade, 67 FR 69186 (November 15, 2002). We included in our 
calculations of normal value those sales to affiliated parties that 
were made at arm's-length prices.

F. Price-to-Price Comparisons

    We based normal value on comparison market sales to unaffiliated 
purchasers and sales to affiliated customers that passed the arm's-
length test. DSM's comparison market prices were based on the ex-
factory or delivered prices. When applicable, we made adjustments for 
differences for movement expenses in accordance with sections 
773(a)(6)(B)(ii) of the Act.
    We also made adjustments for differences in cost attributable to 
differences in physical characteristics of the merchandise pursuant to 
section 773(a)(6)(C)(ii) of the Act and 19 CFR 351.411 and for 
differences in circumstances of sale in accordance with section 
773(a)(6)(C)(iii) of the Act and 19 CFR 351.410. For comparisons to 
CEP, we made circumstance-of-sale adjustments by deducting comparison 
market direct selling expenses from normal value.
Level of Trade
    To the extent practicable, we determine normal value for sales at 
the same level of trade as CEP sales. See section 773(a)(1)(B)(i) of 
the Act and 19 CFR 351.412. When there are no sales at the same level 
of trade, we compare CEP sales to comparison market sales at a 
different level of trade. The normal value level of trade is that of 
the starting-price sales in the comparison market.
    To determine whether comparison market sales are at a different 
level of trade than DSM's U.S. sales in this review, we examined stages 
in the marketing process and selling functions along the chain of 
distribution between the producer and the unaffiliated customer. Based 
on our analysis, we have preliminarily determined that there is one 
level of trade in the United States and one level of trade in the home 
market and that the U.S. level of trade is at a less advanced stage 
than the home market level of trade. Therefore, we have compared U.S. 
sales to home market sales at different levels of trade.
    Because there is only one level of trade in the home market, we 
were unable to calculate a level-of-trade adjustment based on DSM's 
home market sales of the foreign like product and we have no other 
information that provides an appropriate basis for determining a level-
of-trade adjustment. For DSM's CEP sales, to the extent possible, we 
determined normal value at the same level of trade as the U.S. sale to 
the unaffiliated customer and made a CEP-offset adjustment in 
accordance with section 773(a)(7)(B) of the Act. The CEP-offset 
adjustment to normal value is subject to the so-called offset cap, 
which is calculated as the sum of home market indirect selling expenses 
up to the amount of U.S. indirect selling expenses deducted from CEP.
    For a detailed description of our level-of-trade analysis for DSM 
in these preliminary results, see the DSM preliminary analysis 
memorandum dated January 9, 2012.
Currency Conversion
    We made currency conversions into U.S. dollars in accordance with 
section 773A(a) of the Act and 19 CFR 351.415 based on the exchange 
rates in effect on the dates of the relevant U.S. sales as certified by 
the Federal Reserve Bank. These exchange rates are available on the 
Import Administration Web site at http://ia.ita.doc.gov/exchange/index.html.
Preliminary Results of Review
    As a result of this review, we preliminarily determine that the 
weighted-average dumping margin for DSM is 1.64 percent for the period 
February 1, 2010, through January 31, 2011.
Disclosure and Public Comment
    We will disclose the calculations used in our analysis to parties 
in this review within five days of the date of publication of this 
notice. Interested parties, who wish to request a hearing, or to 
participate if one is requested, must submit a written request to the 
Assistant Secretary for Import Administration, U.S. Department of 
Commerce, filed electronically using Import Administration's 
Antidumping and Countervailing Duty Centralized Electronic Service 
System (IA ACCESS). An electronically filed document must be received 
successfully in its entirety by the Department's electronic records 
system, IA ACCESS, by 5 p.m. Eastern Time within 30 days after the date 
of publication of this notice. See 19 CFR 351.310(c). Requests should 
contain the party's name, address, and telephone number, the number of 
participants, and a list of the issues to be discussed. If a request 
for a hearing is made, we will inform parties of the scheduled date for 
the hearing which will be held at the U.S. Department of Commerce, 14th 
Street and Constitution Avenue NW., Washington, DC 20230, at a time and 
location to be determined. See 19 CFR 351.310. Parties should confirm 
by telephone the date, time, and location of the hearing.
    Interested parties are invited to comment on the preliminary 
results of this review. The Department will consider case briefs filed 
by interested parties within 30 days after the date of publication of 
this notice in the Federal Register. Interested parties may file 
rebuttal briefs, limited to issues raised in the case briefs. The 
Department will consider rebuttal briefs filed not later than five days 
after the time limit for filing case briefs. Parties who submit 
arguments are requested to submit with each argument a statement of the 
issue,

[[Page 2036]]

a brief summary of the argument, and a table of authorities cited. 
Further, we request that parties submitting written comments provide 
the Department with a diskette containing an electronic copy of the 
public version of such comments.
    We intend to issue the final results of this administrative review, 
including the results of our analysis of issues raised in the written 
comments, within 120 days of publication of these preliminary results 
in the Federal Register.
Assessment Rates
    The Department shall determine, and CBP shall assess, antidumping 
duties on all appropriate entries. In accordance with 19 CFR 
351.212(b)(1), we calculated an importer-specific assessment rate for 
these preliminary results of review. We divided the total dumping 
margins for the reviewed sales by the total entered value of those 
reviewed sales for the importer. We will instruct CBP to assess the 
importer-specific rate uniformly, as appropriate, on all entries of 
subject merchandise made by the relevant importer during the POR. See 
19 CFR 351.212(b). The Department intends to issue instructions to CBP 
15 days after the publication of the final results of review.
    The Department clarified its ``automatic assessment'' regulation on 
May 6, 2003. See Antidumping and Countervailing Duty Proceedings: 
Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003) (Assessment 
of Antidumping Duties). This clarification will apply to entries of 
subject merchandise during the POR produced by DSM for which DSM did 
not know its merchandise was destined for the United States. In such 
instances, we will instruct CBP to liquidate unreviewed entries of DSM-
produced merchandise at the all-others rate if there is no rate for the 
intermediate company(ies) involved in the transaction. See Assessment 
of Antidumping Duties for a full discussion of this clarification.
Cash-Deposit Requirements
    The following deposit requirements will be effective upon 
publication of the notice of final results of administrative review for 
all shipments of steel plate from Korea entered, or withdrawn from 
warehouse, for consumption on or after the date of publication, as 
provided by section 751(a)(2)(C) of the Act: (1) The cash-deposit rate 
for DSM will be the rate established in the final results of this 
review; (2) for previously reviewed or investigated companies not 
listed above, the cash-deposit rate will continue to be the company-
specific rate published for the most recent period; (3) if the exporter 
is not a firm covered in this review, a prior review, or the less-than-
fair-value investigation but the manufacturer is, the cash-deposit rate 
will be the rate established for the most recent period for the 
manufacturer of the merchandise; (4) if neither the exporter nor the 
manufacturer has its own rate, the cash-deposit rate will be 0.98 
percent,\1\ the all-others rate established in the less-than-fair-value 
investigation, adjusted for the export-subsidy rate in the companion 
countervailing duty investigation. This deposit requirement, when 
imposed, shall remain in effect until further notice.
---------------------------------------------------------------------------

    \1\ See 2007-08 Final, 74 FR at 19048.
---------------------------------------------------------------------------

Notification to Importers
    This notice also serves as a preliminary reminder to importers of 
their responsibility under 19 CFR 351.402(f) to file a certificate 
regarding the reimbursement of antidumping duties prior to liquidation 
of the relevant entries during this review period. Failure to comply 
with this requirement could result in the Department's presumption that 
reimbursement of antidumping duties occurred and the subsequent 
assessment of doubled antidumping duties.
    These preliminary results of administrative review are issued and 
published in accordance with sections 751(a)(1) and 777(i)(1) of the 
Act.

     Dated: January 9, 2012.
Paul Piquado,
Assistant Secretary for Import Administration.
[FR Doc. 2012-613 Filed 1-12-12; 8:45 am]
BILLING CODE 3510-DS-P