[Federal Register Volume 77, Number 9 (Friday, January 13, 2012)]
[Notices]
[Page 2090]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2012-588]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Office of the Secretary


Agency Information Collection Activities; Submission for OMB 
Review; Comment Request; Servicing Multi-Piece and Single Piece Rim 
Wheels Standard

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Department of Labor (DOL) is submitting the Occupational 
Safety and Health Administration sponsored information collection 
request (ICR) titled, ``Servicing Multi-Piece and Single Piece Rim 
Wheels Standard,'' to the Office of Management and Budget (OMB) for 
review and approval for continued use in accordance with the Paperwork 
Reduction Act (PRA) of 1995 (44 U.S.C. 3501 et seq.).

DATES: Submit comments on or before February 13, 2012.

ADDRESSES: A copy of this ICR with applicable supporting documentation; 
including a description of the likely respondents, proposed frequency 
of response, and estimated total burden may be obtained from the 
RegInfo.gov Web site, http://www.reginfo.gov/public/do/PRAMain, on the 
day following publication of this notice or by contacting Michel Smyth 
by telephone at (202) 693-4129 (this is not a toll-free number) or 
sending an email to [email protected].
    Submit comments about this request to the Office of Information and 
Regulatory Affairs, Attn: OMB Desk Officer for the Department of Labor, 
Occupational Safety and Health Administration, Office of Management and 
Budget, Room 10235, Washington, DC 20503, Telephone: (202) 395-6929/
Fax: (202) 395-6881 (these are not toll-free numbers), email: [email protected].

FOR FURTHER INFORMATION CONTACT: Contact Michel Smyth by telephone at 
(202) 693-4129 (this is not a toll-free number) or by email at [email protected].

SUPPLEMENTARY INFORMATION: The provisions of the Servicing Multi-Piece 
and Single Piece Rim Wheels Standard include a requirement that the 
manufacturer or a Registered Professional Engineer certify that 
repaired restraining devices and barriers meet the strength 
requirements specified in the Standard, and a requirement that 
defective wheels and wheel components be marked or tagged. The purpose 
of the requirement is to reduce workers' risk of death or serious 
injury by ensuring that restraining devices used by them during the 
servicing of multi-piece rim wheels are in safe operating condition.
    This information collection is subject to the PRA. A Federal agency 
generally cannot conduct or sponsor a collection of information, and 
the public is generally not required to respond to an information 
collection, unless it is approved by the OMB under the PRA and displays 
a currently valid OMB Control Number. In addition, notwithstanding any 
other provisions of law, no person shall generally be subject to 
penalty for failing to comply with a collection of information if the 
collection of information does not display a valid OMB Control Number. 
See 5 CFR 1320.5(a) and 1320.6. The DOL obtains OMB approval for this 
information collection under OMB Control Number 1218-0219. The current 
OMB approval is scheduled to expire on January 31, 2012; however, it 
should be noted that existing information collection requirements 
submitted to the OMB receive a month-to-month extension while they 
undergo review. For additional information, see the related notice 
published in the Federal Register on September 8, 2011 (76 FR 55708).
    Interested parties are encouraged to send comments to the OMB, 
Office of Information and Regulatory Affairs at the address shown in 
the ADDRESSES section within 30 days of publication of this notice in 
the Federal Register. In order to help ensure appropriate 
consideration, comments should reference OMB Control Number 1218-0219. 
The OMB is particularly interested in comments that:
     Evaluate whether the proposed collection of information is 
necessary for the proper performance of the functions of the agency, 
including whether the information will have practical utility;
     Evaluate the accuracy of the agency's estimate of the 
burden of the proposed collection of information, including the 
validity of the methodology and assumptions used;
     Enhance the quality, utility, and clarity of the 
information to be collected; and
     Minimize the burden of the collection of information on 
those who are to respond, including through the use of appropriate 
automated, electronic, mechanical, or other technological collection 
techniques or other forms of information technology, e.g., permitting 
electronic submission of responses.
    Agency: Occupational Safety and Health Administration.
    Title of Collection: Servicing Multi-Piece and Single Piece Rim 
Wheels Standard.
    OMB Control Number: 1218-0219.
    Affected Public: Private Sector--Businesses or other for-profits.
    Total Estimated Number of Respondents: 8.
    Total Estimated Number of Responses: 8.
    Total Estimated Annual Burden Hours: 1.
    Total Estimated Annual Other Costs Burden: $0.

    Dated: January 9, 2012.
Michel Smyth,
Departmental Clearance Officer.
[FR Doc. 2012-588 Filed 1-12-12; 8:45 am]
BILLING CODE 4510-26-P