[Federal Register Volume 76, Number 221 (Wednesday, November 16, 2011)]
[Notices]
[Page 70957]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2011-29619]



[[Page 70957]]

=======================================================================
-----------------------------------------------------------------------

 DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[Docket 73-2011]


Foreign-Trade Zone 277--Western Maricopa County, AZ; Application 
for Manufacturing Authority, Sub-Zero, Inc. (Refrigerators and 
Freezers), Goodyear, AZ

    An application has been submitted to the Foreign-Trade Zones Board 
(the Board) by the Greater Maricopa County Foreign Trade Zone, Inc., 
grantee of FTZ 277, requesting manufacturing authority on behalf of 
Sub-Zero, Inc. (Sub-Zero), located in Goodyear, Arizona. The 
application was submitted pursuant to the provisions of the Foreign-
Trade Zones Act, as amended (19 U.S.C. 81a-81u), and the regulations of 
the Board (15 CFR part 400). It was formally filed on November 10, 
2011.
    The Sub-Zero facility (260 employees, 10 acres, 150,000 units/year) 
is located at 4295 N. Cotton Lane within the Palm Valley 303 Industrial 
Park in Goodyear, Arizona (Site 3). The facility is used to manufacture 
refrigerators, freezers, and wine storage units for export and the 
domestic market. Components and materials sourced from abroad 
(representing 14% of the value of the finished products) include: Oils, 
greases, paints, varnishes, caulking, sealants, cleansers, glues/
adhesives, epoxies, chemical binding agents, polyethylenes, 
polystyrenes, polyvinyl acetates, polyamides, articles of plastic, 
silicones, boxes, cases, crates, pallets, ethylene bags, stoppers/lids/
caps, table utensils, articles of rubber, articles of paper, printed 
materials, slag/rock wools, safety glass, silver, fasteners, springs, 
wire, articles of steel, copper tubes/pipes/fittings/profiles, aluminum 
bars/rods/profiles/fasteners/foil/fittings, structures of aluminum, 
articles of zinc, articles of magnesium, locks, base metal mountings, 
automatic door actuators, pumps, compressors, fans, air conditioners, 
heat pumps, refrigerator parts, filters, process controllers, taps, 
valves, bearings, gears, electric motors and parts thereof, 
transformers, semiconductor devices, converters, magnets, electrical 
components, lamps, coaxial cable, insulators, regulators, thermostats, 
timers, and lighters (duty rate range: Free--10.7%; 14.8[cent]/kg + 
3.5%; 45[cent] ea. + 6.4% + 2.5[cent]/jewel).
    FTZ procedures could exempt Sub-Zero from customs duty payments on 
foreign materials and components used in export production. The company 
anticipates that some 10 percent of the plant's shipments will be 
exported. On its domestic sales, Sub-Zero would be able to choose the 
duty rate during customs entry procedures that applies to 
refrigerators, freezers, and wine storage units (duty rate--free) for 
the foreign inputs noted above. Sub-Zero would also be exempt from duty 
payments on any of the foreign inputs that become scrap or waste during 
manufacturing. FTZ designation would further allow Sub-Zero to realize 
logistical benefits through the use of weekly customs entry procedures. 
Customs duties also could possibly be deferred or reduced on foreign 
status production equipment. The application indicates that the savings 
from FTZ procedures would help improve the plant's international 
competitiveness.
    In accordance with the Board's regulations, Pierre Duy of the FTZ 
Staff is designated examiner to evaluate and analyze the facts and 
information presented in the application and case record and to report 
findings and recommendations to the Board.
    Public comment is invited from interested parties. Submissions 
(original and 3 copies) shall be addressed to the Board's Executive 
Secretary at the address below. The closing period for their receipt is 
January 17, 2012. Rebuttal comments in response to material submitted 
during the foregoing period may be submitted during the subsequent 15-
day period to January 30, 2012.
    A copy of the application will be available for public inspection 
at the Office of the Executive Secretary, Foreign-Trade Zones Board, 
Room 2111, U.S. Department of Commerce, 1401 Constitution Avenue NW., 
Washington, DC 20230-0002, and in the ``Reading Room'' section of the 
Board's Web site, which is accessible via http://www.trade.gov/ftz.
    For further information, contact Pierre Duy at [email protected] 
or (202) 482-1378.

    Dated: November 10, 2011.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2011-29619 Filed 11-15-11; 8:45 am]
BILLING CODE P