[Federal Register Volume 76, Number 118 (Monday, June 20, 2011)]
[Notices]
[Pages 35886-35891]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2011-15251]


=======================================================================
-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2011-0505; FRL-8877-3]


Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires 
any person who intends to manufacture (defined by statute to include 
import) a new chemical (i.e., a chemical not on the TSCA Chemical 
Substances Inventory (TSCA Inventory)) to notify EPA and comply with 
the statutory provisions pertaining to the manufacture of new 
chemicals. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to 
publish in the Federal Register a notice of receipt of a premanufacture 
notice (PMN) or an

[[Page 35887]]

application for a test marketing exemption (TME), and to publish in the 
Federal Register periodic status reports on the new chemicals under 
review and the receipt of notices of commencement (NOC) to manufacture 
those chemicals. This document, which covers the period from April 25, 
2011 to May 20, 2011, and provides the required notice and status 
report, consists of the PMNs and TMEs, both pending or expired, and the 
NOC to manufacture a new chemical that the Agency has received under 
TSCA section 5 during this time period.

DATES: Comments identified by the specific PMN number or TME number, 
must be received on or before July 20, 2011.

ADDRESSES: Submit your comments, identified by docket identification 
(ID) number EPA-HQ-OPPT-2011-0505, and the specific PMN number or TME 
number for the chemical related to your comment, by one of the 
following methods:
     Federal eRulemaking Portal: http://www.regulations.gov. 
Follow the on-line instructions for submitting comments.
     Mail: Document Control Office (7407M), Office of Pollution 
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 
Pennsylvania Ave., NW., Washington, DC 20460-0001.
     Hand Delivery: OPPT Document Control Office (DCO), EPA 
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. The 
DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding 
legal holidays. The telephone number for the DCO is (202) 564-8930. 
Such deliveries are only accepted during the DCO's normal hours of 
operation, and special arrangements should be made for deliveries of 
boxed information.
    Instructions: EPA's policy is that all comments received will be 
included in the docket without change and may be made available on-line 
at http://www.regulations.gov, including any personal information 
provided, unless the comment includes information claimed to be 
Confidential Business Information (CBI) or other information whose 
disclosure is restricted by statute. Do not submit information that you 
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' system, 
which means EPA will not know your identity or contact information 
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov, 
your e-mail address will be automatically captured and included as part 
of the comment that is placed in the docket and made available on the 
Internet. If you submit an electronic comment, EPA recommends that you 
include your name and other contact information in the body of your 
comment and with any disk or CD-ROM you submit. If EPA cannot read your 
comment due to technical difficulties and cannot contact you for 
clarification, EPA may not be able to consider your comment. Electronic 
files should avoid the use of special characters, any form of 
encryption, and be free of any defects or viruses.
    Docket: All documents in the docket are listed in the docket index 
available at http://www.regulations.gov. Although listed in the index, 
some information is not publicly available, e.g., CBI or other 
information whose disclosure is restricted by statute. Certain other 
material, such as copyrighted material, will be publicly available only 
in hard copy. Publicly available docket materials are available 
electronically at http://www.regulations.gov, or, if only available in 
hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA 
Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution 
Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of 
operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding 
legal holidays. The telephone number of the EPA/DC Public Reading Room 
is (202) 566-1744, and the telephone number for the OPPT Docket is 
(202) 566-0280. Docket visitors are required to show photographic 
identification, pass through a metal detector, and sign the EPA visitor 
log. All visitor bags are processed through an X-ray machine and 
subject to search. Visitors will be provided an EPA/DC badge that must 
be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT: For technical information contact: 
Bernice Mudd, Information Management Division (7407M), Office of 
Pollution Prevention and Toxics, Environmental Protection Agency, 1200 
Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: 
(202) 564-8951; fax number: (202) 564-8955; e-mail address: 
[email protected].
    For general information contact: The TSCA-Hotline, ABVI-Goodwill, 
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 
554-1404; e-mail address: [email protected].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this action apply to me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitter of the PMNs addressed in this action. 
If you have any questions regarding the applicability of this action to 
a particular entity, consult the person listed under FOR FURTHER 
INFORMATION CONTACT.

B. What should I consider as I prepare my comments for EPA?

    1. Submitting CBI. Do not submit this information to EPA through 
regulations.gov or e-mail. Clearly mark the part or all of the 
information that you claim to be CBI. For CBI information in a disk or 
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as 
CBI and then identify electronically within the disk or CD-ROM the 
specific information that is claimed as CBI. In addition to one 
complete version of the comment that includes information claimed as 
CBI, a copy of the comment that does not contain the information 
claimed as CBI must be submitted for inclusion in the public docket. 
Information so marked will not be disclosed except in accordance with 
procedures set forth in 40 CFR Part 2.
    2. Tips for preparing your comments. When submitting comments, 
remember to:
    i. Identify the document by docket ID number and other identifying 
information (subject heading, Federal Register date and page number).
    ii. Follow directions. The Agency may ask you to respond to 
specific questions or organize comments by referencing a Code of 
Federal Regulations (CFR) part or section number.
    iii. Explain why you agree or disagree; suggest alternatives and 
substitute language for your requested changes.
    iv. Describe any assumptions and provide any technical information 
and/or data that you used.
    v. If you estimate potential costs or burdens, explain how you 
arrived at your estimate in sufficient detail to allow for it to be 
reproduced.
    vi. Provide specific examples to illustrate your concerns and 
suggest alternatives.
    vii. Explain your views as clearly as possible, avoiding the use of 
profanity or personal threats.
    viii. Make sure to submit your comments by the comment period 
deadline identified.

[[Page 35888]]

II. Why is EPA taking this action?

    EPA classifies a chemical substance as either an ``existing'' 
chemical or a ``new'' chemical. Any chemical substance that is not on 
EPA's TSCA Inventory is classified as a ``new chemical,'' while those 
that are on the TSCA Inventory are classified as an ``existing 
chemical.'' For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to 
manufacture or import a new chemical substance for a non-exempt 
commercial purpose is required by TSCA section 5 to provide EPA with a 
PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes 
EPA to allow persons, upon application, to manufacture (includes 
import) or process a new chemical substance, or a chemical substance 
subject to a significant new use rule (SNUR) issued under TSCA section 
5(a), for ``test marketing'' purposes, which is referred to as a test 
marketing exemption, or TME. For more information about the 
requirements applicable to a new chemical go to: http://ww.epa.gov/opt/newchems.
    Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish 
in the Federal Register a notice of receipt of a PMN or an application 
for a TME and to publish in the Federal Register periodic status 
reports on the new chemicals under review and the receipt of NOCs to 
manufacture those chemicals. This status report, which covers the 
period from April 25, 2011 to May 20, 2011, consists of the PMNs and 
TMEs, both pending or expired, and the NOCs to manufacture a new 
chemical that the Agency has received under TSCA section 5 during this 
time period.

III. Receipt and Status Reports

    In Table I of this unit, EPA provides the following information (to 
the extent that such information is not claimed as CBI) on the PMNs 
received by EPA during this period: The EPA case number assigned to the 
PMN, the date the PMN was received by EPA, the projected end date for 
EPA's review of the PMN, the submitting manufacturer/importer, the 
potential uses identified by the manufacturer/importer in the PMN, and 
the chemical identity.

                                              Table I--49 PMNs Received From April 25, 2011 to May 20, 2011
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                      Projected
              Case No.                  Received     notice  end   Manufacturer/ importer              Use                          Chemical
                                          date          date
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-11-0341...........................     4/25/2011     7/23/2011  CBI....................  (S) One resin component for  (G) Resin polyester.
                                                                                            2k automotive coatings.
P-11-0342...........................     4/25/2011     7/23/2011  CBI....................  (G) Ink, coating, adhesive.  (G) Polyacrylate oligomer.
P-11-0343...........................     4/25/2011     7/23/2011  CBI....................  (G) Base oil for lubricant.  (G) Fatty acid esters.
P-11-0344...........................     4/25/2011     7/23/2011  CBI....................  (G) PMN substance is an      (G) Polyaromatic heterocycle
                                                                                            intermediate used to make    precursor.
                                                                                            various ligands for organo-
                                                                                            metallic catalysts and
                                                                                            potentially other
                                                                                            substances.
P-11-0345...........................     4/25/2011     7/23/2011  CBI....................  (G) An organic chemical      (G) Heterocyclic organic
                                                                                            intermediate for use to      intermediate.
                                                                                            make various other
                                                                                            chemicals for the
                                                                                            synthesis of organo-
                                                                                            metallic catalysts and
                                                                                            potentially other
                                                                                            materials.
P-11-0346...........................     4/25/2011     7/23/2011  CBI....................  (G) Intermediate precursor   (G) Halogenated aromatic
                                                                                            to organometallic catalyst   heterocyclic intermediate.
                                                                                            synthesis.
P-11-0347...........................     4/27/2011     7/25/2011  Henkel Corporation.....  (G) Adhesive...............  (S) N,N-dimethyl-p-toluidine-n-
                                                                                                                         oxide or benzeneamine, N,N, 4-
                                                                                                                         trimethyl, n-oxide.
P-11-0348...........................     4/22/2011     7/20/2011  CBI....................  (G) Battery component        (G) Sodium melt electrolyte.
                                                                                            manufacturing.
P-11-0349...........................     4/27/2011     7/25/2011  Nanotech Industries,     (S) Flooring; paints; top    (S) Carbamic acid, N,N'-
                                                                   Inc..                    coating.                     (trymethyl-1,6hehanedyl)bis-
                                                                                                                         ,ester with 1,2-propanediol
                                                                                                                         (1:2).
P-11-0350...........................     4/28/2011     7/26/2011  CBI....................  (G) Epoxy curative.........  (S) Phenol, 4,4'-sulfonylbis-,
                                                                                                                         bis(mixed acetates and
                                                                                                                         propionates).
P-11-0351...........................     4/28/2011     7/26/2011  CBI....................  (G) Ink binder.............  (G) Polyurethane.
P-11-0352...........................     4/28/2011     7/26/2011  Sasol North America....  (S) Anti-graying agent in    (S) 1,4-benzenedicarboxylic
                                                                                            fabric washes.               acid, 1,4-dimethyl ester,
                                                                                                                         polymer with 1,2-ethanediol and
                                                                                                                         1,2,3-propanetriol, ester with
                                                                                                                         methyl--hydroxypoly(oxy-1,2-
                                                                                                                         ethandiyl).
P-11-0353...........................     4/28/2011     7/27/2011  Sasol North America....  (S) Anti-graying agent in    (S) 1,4-benzenedicarboxylic
                                                                                            fabric washes.               acid, 1,4-dimethyl ester,
                                                                                                                         polymer with 1,2-propanediol,
                                                                                                                         ester with -methyl--
                                                                                                                         hydroxypoly(oxy-1,2-
                                                                                                                         ethanediyl).
P-11-0354...........................     4/29/2011     7/27/2011  CBI....................  (G) Coating................  (G) Polycarbonate type urethane
                                                                                                                         resin.
P-11-0355...........................      5/3/2011     7/31/2011  Hybrid Plastics, Inc...  (G) Thermoplastics and       (S)
                                                                                            coatings additive;           Tricyclo[7.3.3.15,11]heptasilox
                                                                                            elastomer additive.          ane-3,7,14-
                                                                                                                         triol,1,3,5,7,9,11,14-
                                                                                                                         heptaisooctyl-, stereoisomer.
P-11-0356...........................      5/2/2011     7/30/2011  3M Company.............  (S) Prepolymer for           (G) Alkoxysilyl polyether
                                                                                            sprayable adhesive/          prepolymer.
                                                                                            sealant; prepolymer for
                                                                                            high viscosity adhesive/
                                                                                            sealant.
P-11-0357...........................      5/4/2011      8/1/2011  CBI....................  (G) Coating................  (G) Polycarbonate type urethane
                                                                                                                         resin.
P-11-0358...........................      5/4/2011      8/1/2011  CBI....................  (G) Polyurethane surfactant  (G) Trisiloxane copolymer.

[[Page 35889]]

 
P-11-0359...........................      5/6/2011      8/3/2011  Cytec Industries Inc...  (S) Binder for printing      (G) Fatty acids polymers with
                                                                                            inks.                        alkanoic acid, substituted
                                                                                                                         alkyl diol and substituted
                                                                                                                         carbomoncycle.
P-11-0360...........................      5/4/2011      8/1/2011  CBI....................  (S) As a surface active      (G) Quaternized
                                                                                            agent in the preparation     polyvinylimidazole.
                                                                                            of printed circuit boards;
                                                                                            as a brightener for the
                                                                                            electroplating industry.
P-11-0361...........................      5/4/2011      8/1/2011  CBI....................  (S) As a surface active      (G) Quaternized
                                                                                            agent in the preparation     polyvinylimidazole.
                                                                                            of printed circuit boards;
                                                                                            as a brightener for the
                                                                                            electroplating industry.
P-11-0362...........................     5/10/2011      8/7/2011  CBI....................  (G) Flame retardant........  (G) Phosphonium-substituted
                                                                                                                         heteroaromatic sulfate salt.
P-11-0363...........................      5/9/2011      8/6/2011  CBI....................  (G) Specialty additive.....  (G) Sodiium humate, polymer with
                                                                                                                         acrylic monomers.
P-11-0364...........................     5/12/2011      8/9/2011  CBI....................  (G) Prepolymer for casting   (G) Alkanediol, polymer with
                                                                                            transparencies.              1,1'-methylenebis[4-
                                                                                                                         isocyanatocyclohexane].
P-11-0365...........................     5/12/2011      8/9/2011  CBI....................  (G) Dispersant.............  (G) Tall oil acids, reaction
                                                                                                                         products with dialkyleneamine
                                                                                                                         and acid anhydride, compounds
                                                                                                                         with polyalkylene glycol
                                                                                                                         hydrogen maleate alkyl ethers.
P-11-0366...........................     5/12/2011      8/9/2011  CBI....................  (G) Raw material for the     (G) 1-propanone, 2-hydroxy-2-
                                                                                            manufacturing of release     methyl-, 1-(4-alkylaryl)
                                                                                            coatings.                    derivates.
P-11-0367...........................     5/11/2011      8/8/2011  CBI....................  (G) Resin is used for        (G) Elastomer polyurethane.
                                                                                            production of synthetic
                                                                                            leather.
P-11-0368...........................     5/11/2011      8/8/2011  CBI....................  (G) Lamination adhesive....  (G) IPDI modified polyester
                                                                                                                         resin.
P-11-0369...........................     5/12/2011      8/9/2011  Matteson-Ridolfi         (G) Polymeric flow and foam  (G) Alkyl polyester--acrylic
                                                                   Incorporated.            control additive for         copolymer.
                                                                                            industrial coatings.
P-11-0370...........................     5/12/2011      8/9/2011  Matteson-Ridolfi         (G) Polymeric flow and foam  (G) Alkyl polyester--acrylic
                                                                   Incorporated.            control additive for         copolymer.
                                                                                            industrial coatings.
P-11-0371...........................     5/13/2011     8/10/2011  CBI....................  (G) Binder.................  (G) Polyurethane.
P-11-0372...........................     5/13/2011     8/10/2011  CBI....................  (G) Adhesives for open non-  (G) Polyesterurethane.
                                                                                            descriptive use.
P-11-0373...........................     5/17/2011     8/14/2011  CBI....................  (G) Coating component......  (G) 1,1'-
                                                                                                                         methylenebis[isocyanatobenzene]
                                                                                                                         , polymer with polyester
                                                                                                                         polyols and polypropylene
                                                                                                                         glycol.
P-11-0374...........................     5/17/2011     8/14/2011  CBI....................  (G) Polymerization process   (G) Alcanoic acid, 2, 2'-
                                                                                            additive destructive use.    [carbonothioylbis(thio)]bis-,
                                                                                                                         disodium salt.
P-11-0375...........................     5/18/2011     8/15/2011  CBI....................  (S) Laminate adhesive......  (G) Solvent free aromatic
                                                                                                                         adhesive.
P-11-0376...........................     5/18/2011     8/15/2011  CBI....................  (G) An open non-dispersive   (G) Aliphatic alcohol type
                                                                                            use in ink.                  polyester.
P-11-0377...........................     5/16/2011     8/13/2011  CBI....................  (G) Lubricants.............  (G) Highly branched
                                                                                                                         isoparaffinic hydrocarbons.
P-11-0378...........................     5/18/2011     8/15/2011  CBI....................  (S) As a surface active      (G) Quaternized
                                                                                            agent in the preparation     polyvinylimidazole.
                                                                                            of printed; as a
                                                                                            brightener for the
                                                                                            electroplating industry.
P-11-0379...........................     5/18/2011     8/15/2011  CBI....................  (S) As a surface active      (G) Quaternized
                                                                                            agent in the preparation     polyvinylimidazole.
                                                                                            of printed; as a
                                                                                            brightener for the
                                                                                            electroplating industry.
P-11-0380...........................     5/18/2011     8/15/2011  CBI....................  (G) Contained use in energy  (G) Tertiary amine salt.
                                                                                            production.
P-11-0381...........................     5/18/2011     8/15/2011  CBI....................  (G) Contained use in energy  (G) Tertiary amine salt.
                                                                                            production.
P-11-0382...........................     5/18/2011     8/15/2011  CBI....................  (G) Contained use in energy  (G) Tertiary amine salt.
                                                                                            production.
P-11-0383...........................     5/18/2011     8/15/2011  CBI....................  (G) Lubricant additive.....  (G) Calcium alkyl salicylate.
P-11-0384...........................     5/18/2011     8/15/2011  3M Company.............  (G) Protective treatment...  (G) Fluorinated
                                                                                                                         alkylsulfonamidol urethane
                                                                                                                         polymer.
P-11-0385...........................     5/19/2011     8/16/2011  CBI....................  (G) Pigment formulation      (G) Oxirane, 2-alkyl, polymer
                                                                                            additive.                    with oxirane, mono(dihydrogen
                                                                                                                         phosphate), nutshell liquid
                                                                                                                         ethers, dipotassium salts.

[[Page 35890]]

 
P-11-0386...........................     5/20/2011     8/17/2011  Emery Oleochemicals LLC  (S) Wetting agent..........  (S) Nonanoic acid, ammonium
                                                                                                                         salt.
P-11-0387...........................     5/19/2011     8/16/2011  CBI....................  (G) Prepolymers for          (G) Polycarbonate TDI
                                                                                            manufacturing polyurethane   prepolymer.
                                                                                            rubber elastomer for
                                                                                            tires, wheels, rolls,
                                                                                            screens, belts and other
                                                                                            specialty urethane
                                                                                            articles.
P-11-0388...........................     5/18/2011     8/15/2011  CBI....................  (G) Contained use in energy  (G) Tertiary amine salt.
                                                                                            production.
P-11-0389...........................     5/18/2011     8/15/2011  CBI....................  (G) Contained use in energy  (G) Tertiary amine salt.
                                                                                            production..
--------------------------------------------------------------------------------------------------------------------------------------------------------

    In Table II of this unit EPA provides the following information (to 
the extent that such information is not claimed as CBI) on the TMEs 
received by EPA during this period: The EPA case number assigned to the 
TME, the date the TME was received by EPA, the projected end date for 
EPA's review of the TME, the submitting manufacturer/importer, the 
potential uses identified by the manufacturer/importer in the TME, and 
the chemical identity.

                                              Table II--1 TME Received From April 25, 2011 to May 20, 2011
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                       Projected
               Case No.                  Received     review end     Manufacturer/importer                Use                         Chemical
                                           date          date
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-11-0009............................      5/6/2011     6/19/2011  Cytec Industries Inc....  (S) Binder for printing inks.  (G) Fatty acids polymers
                                                                                                                             with alkanoic acid,
                                                                                                                             substituted alkyl diol and
                                                                                                                             substituted carbomoncycle.
--------------------------------------------------------------------------------------------------------------------------------------------------------

    In Table III of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the NOCs 
received by EPA during this period: The EPA case number assigned to the 
NOC, the date the NOC was received by EPA, the projected end date for 
EPA's review of the NOC, and chemical identity.

                         Table III--41 NOCs Received From April 25, 2011 to May 20, 2011
----------------------------------------------------------------------------------------------------------------
                                                             Commencement
                   Case No.                      Received     notice end                  Chemical
                                                   date          date
----------------------------------------------------------------------------------------------------------------
P-06-0332....................................     5/13/2011      5/5/2011  (G) Phosphine oxide.
P-06-0380....................................      5/5/2011     4/13/2011  (G) Alkyl substituted carbobicycle
                                                                            acid anhydride.
P-07-0471....................................     5/10/2011     4/25/2011  (G) Carbomonocyclic dicarboxylic acid
                                                                            polymer containing trimethyl
                                                                            substituted alkane diol and 1,6-
                                                                            hexanediol.
P-08-0274....................................      5/3/2011     4/12/2011  (G) Alkanedioic acid, polymer with
                                                                            alkanediol, alkanediamine,
                                                                            alkanediol, hydroxy-(hydroxyalkyl)-
                                                                            alkyl-, trialkylamine, carbocycle-
                                                                            isocyanato-(isocyanatoalkyl)-
                                                                            trialkyl-, trialkylcyclohexane and
                                                                            alkylimino alcohol, salt.
P-09-0486....................................      5/5/2011      5/2/2011  (G) Polyalkenyl, N,N'-bistriazole.
P-09-0546....................................     4/27/2011     4/15/2011  (G) Formaldehyde reaction products
                                                                            with aromatic amine.
P-09-0552....................................     5/17/2011      5/6/2011  (S) Benzene, 1,3-bis(1-chloro-1-
                                                                            methylethyl).
P-09-0642....................................     4/27/2011     4/20/2011  (G) Acrylate.
P-09-0644....................................     5/18/2011     5/16/2011  (G) Substituted alkyl phosphate
                                                                            ester.
P-09-0646....................................     4/29/2011      4/7/2011  (G) Aromatic dicarboxylic acid,
                                                                            polymer with aliphatic diols and
                                                                            aliphatic dicarboxylic acid.
P-10-0072....................................     5/20/2011      4/8/2011  (G) Substituted oxidized piperidinyl
                                                                            derivative.
P-10-0247....................................      5/2/2011     2/28/2011  (G) Benzyl isononyl cyclohexane-1,2-
                                                                            dicarboxylate (provisional).
P-10-0266....................................      5/3/2011      4/6/2011  (G) Propanoic acid, alkylthio, (1,1-
                                                                            dimethylethyl)--[[alkyl-4-hydroxy-2-
                                                                            alkylphenyl]thio]alkylphenyl ester.
P-10-0333....................................     4/27/2011      4/1/2011  (G) 1,4:3,6-dianhydrohexitol-,
                                                                            reaction products with chloro-
                                                                            oxopropoxy-benzoic acid and hydroxy-
                                                                            methoxybenzoic acid.
P-10-0334....................................     4/27/2011      4/1/2011  (G) Benzoic acid, (acryloxy)alkoxy-,
                                                                            1,1'-(methylphenylene) ester.
P-10-0379....................................     4/29/2011     4/20/2011  (G) Vegetable oil, ester, polymd.,
                                                                            oxidized.
P-10-0422....................................     4/25/2011     4/12/2011  (S) Propane, 1,1,1,2,3,-pentafluoro-
                                                                            *.
P-10-0440....................................     5/17/2011     4/28/2011  (G) Polyester.
P-10-0476....................................      5/6/2011     4/28/2011  (G) Brominated styrene butadiene
                                                                            polymer.
P-10-0505....................................     4/27/2011     4/14/2011  (G) Alkoxylated alkyl alcohol, ester
                                                                            with alknoenedioic acid, alkali
                                                                            metal salt.

[[Page 35891]]

 
P-10-0515....................................     5/11/2011     3/18/2011  (S) 2-propenoic acid, 2-methyl-,
                                                                            methyl ester, polymer with butyl 2-
                                                                            propenoate and N-(1,1-dimethyl-3-
                                                                            oxobutyl)-2-propenamide*.
P-10-0550....................................     4/29/2011      4/8/2011  (G) Vegetable oil, modified products,
                                                                            esters.
P-10-0551....................................     4/29/2011     4/11/2011  (G) Olefins.
P-10-0552....................................     4/29/2011     4/11/2011  (G) Olefins.
P-10-0553....................................     4/29/2011     4/11/2011  (G) Olefins.
P-10-0554....................................     5/16/2011     5/13/2011  (G) Esters.
P-10-0555....................................     5/16/2011     5/13/2011  (G) Esters.
P-10-0563....................................     4/27/2011     4/22/2011  (G) Cycloalkylamine.
P-10-0564....................................     4/25/2011     4/16/2011  (G) Maleated fatty oil, substituted
                                                                            alkanoic acid ester, ester with
                                                                            polyethylene glycol, compounds with
                                                                            alkyl alkanol amine.
P-11-0055....................................     5/11/2011     4/27/2011  (G) Polyester urethane polymer.
P-11-0109....................................     4/25/2011     4/22/2011  (G) Substituted alkyl homopolymer,
                                                                            substituted alkylacrylate and
                                                                            heteromonocyclic homopolymer
                                                                            monoester with substituted
                                                                            alkylacrylate.
P-11-0116....................................     5/18/2011     4/27/2011  (G) Carboxylic acid, alkanoate
                                                                            polymer with ethenylbenzene and 2-
                                                                            propenoic acid, di-me 2,2'-(1,2-
                                                                            diazenediyl)bis[2-methylpropanoate]-
                                                                            initiatied, compds. with 2-
                                                                            (dimethylamino)ethanol.
P-11-0117....................................     4/29/2011      4/8/2011  (G) Polyamine-polymer graft polymer.
P-11-0131....................................      5/3/2011     4/11/2011  (G) Isocyanate-terminated prepolymer.
P-11-0136....................................      5/9/2011     3/30/2011  (G) Polyether polyester polyurethane
                                                                            adhesive.
P-11-0145....................................     4/25/2011     4/16/2011  (G) Acrylic polymer.
P-11-0149....................................     5/11/2011     4/23/2011  (G) Isocyanate function polyester
                                                                            urethane polymer.
P-11-0152....................................     4/29/2011     4/21/2011  (G) Polyester type polyurethane
                                                                            resin.
P-11-0164....................................      5/9/2011      5/5/2011  (G) 2-propenoic acid, 2-methyl-,
                                                                            aminoalkyl ester, polymer with et
                                                                            acrylate, 2-hydroxyethyl
                                                                            methacrylate, polyethylene glycol
                                                                            methacrylate alkyl ether and
                                                                            polyethylene-polypropylene glycol
                                                                            alkyl ether.
P-11-0166....................................     4/27/2011     4/26/2011  (G) Fatty acids, esters with
                                                                            polyalkylene glycol mono alkyl
                                                                            ether.
P-11-0173....................................     5/19/2011     5/17/2011  (G) Polyurethane dispersion in water.
----------------------------------------------------------------------------------------------------------------

    If you are interested in information that is not included in these 
tables, you may contact EPA as described in Unit II. to access 
additional non-CBI information that may be available.

List of Subjects

    Environmental protection, Chemicals, Hazardous substances, Imports, 
Notice of commencement, Premanufacturer, Reporting and recordkeeping 
requirements, Test marketing exemptions.

    Dated: June 8, 2011.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.
[FR Doc. 2011-15251 Filed 6-17-11; 8:45 am]
BILLING CODE 6560-50-P