[Federal Register Volume 76, Number 107 (Friday, June 3, 2011)]
[Notices]
[Pages 32188-32196]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2011-13672]
=======================================================================
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2011-0314; FRL-8873-7]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Chemical
Substances Inventory (TSCA Inventory)) to notify EPA and comply with
the statutory provisions pertaining to the manufacture of new
chemicals. Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to
publish in the Federal Register a notice of receipt of a premanufacture
notice (PMN) or an application for a test marketing exemption (TME),
and to publish in the Federal Register periodic status reports on the
new chemicals under review and the receipt of notices of commencement
(NOC) to manufacture those chemicals. This document, which covers the
period from December 3, 2010 to January 31, 2011, and provides the
required notice and status report, consists of the PMNs pending or
expired, and the NOC to manufacture a new chemical that the Agency has
received under TSCA section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before July 5, 2011.
ADDRESSES: Submit your comments, identified by docket identification
(ID)
[[Page 32189]]
number EPA-HQ-OPPT-2011-0314, and the specific PMN number or TME number
for the chemical related to your comment, by one of the following
methods:
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. The
DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding
legal holidays. The telephone number for the DCO is (202) 564-8930.
Such deliveries are only accepted during the DCO's normal hours of
operation, and special arrangements should be made for deliveries of
boxed information.
Instructions: EPA's policy is that all comments received will be
included in the docket without change and may be made available on-line
at http://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov Web site is an ``anonymous access'' system,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov,
your e-mail address will be automatically captured and included as part
of the comment that is placed in the docket and made available on the
Internet. If you submit an electronic comment, EPA recommends that you
include your name and other contact information in the body of your
comment and with any disk or CD-ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses.
Docket: All documents in the docket are listed in the docket index
available at http://www.regulations.gov. Although listed in the index,
some information is not publicly available, e.g., CBI or other
information whose disclosure is restricted by statute. Certain other
material, such as copyrighted material, will be publicly available only
in hard copy. Publicly available docket materials are available
electronically at http://www.regulations.gov, or, if only available in
hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA
Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution
Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of
operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding
legal holidays. The telephone number of the EPA/DC Public Reading Room
is (202) 566-1744, and the telephone number for the OPPT Docket is
(202) 566-0280. Docket visitors are required to show photographic
identification, pass through a metal detector, and sign the EPA visitor
log. All visitor bags are processed through an X-ray machine and
subject to search. Visitors will be provided an EPA/DC badge that must
be visible at all times in the building and returned upon departure.
FOR FURTHER INFORMATION CONTACT: For technical information contact:
Bernice Mudd, Information Management Division (7407M), Office of
Pollution Prevention and Toxics, Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number:
(202) 564-8951; fax number: (202) 564-8955; e-mail address:
[email protected].
For general information contact: The TSCA-Hotline, ABVI-Goodwill,
422 South Clinton Ave., Rochester, NY 14620; telephone number: (202)
554-1404; e-mail address: [email protected].
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the PMNs addressed in this action.
If you have any questions regarding the applicability of this action to
a particular entity, consult the person listed under FOR FURTHER
INFORMATION CONTACT.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as
CBI and then identify electronically within the disk or CD-ROM the
specific information that is claimed as CBI. In addition to one
complete version of the comment that includes information claimed as
CBI, a copy of the comment that does not contain the information
claimed as CBI must be submitted for inclusion in the public docket.
Information so marked will not be disclosed except in accordance with
procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at your estimate in sufficient detail to allow for it to be
reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA taking this action?
EPA classifies a chemical substance as either an ``existing''
chemical or a ``new'' chemical. Any chemical substance that is not on
EPA's TSCA Inventory is classified as a ``new chemical,'' while those
that are on the TSCA Inventory are classified as an ``existing
chemical.'' For more information about the TSCA Inventory go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm. Anyone who plans to
manufacture or import a new chemical substance for a non-exempt
commercial purpose is required by TSCA section 5 to provide EPA with a
PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes
EPA to allow persons, upon application, to manufacture (includes
import) or process a new chemical substance, or a chemical substance
subject to a significant new use rule (SNUR) issued under TSCA
[[Page 32190]]
section 5(a), for ``test marketing'' purposes, which is referred to as
a test marketing exemption, or TME. For more information about the
requirements applicable to a new chemical go to: http://ww.epa.gov/opt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish
in the Federal Register a notice of receipt of a PMN or an application
for a TME and to publish in the Federal Register periodic status
reports on the new chemicals under review and the receipt of NOCs to
manufacture those chemicals. This status report, which covers the
period from December 3, 2010 to January 31, 2011, consists of the PMNs
pending or expired, and the NOCs to manufacture a new chemical that the
Agency has received under TSCA section 5 during this time period.
III. Receipt and Status Reports
In Table I. of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: The EPA case number assigned to the
PMN, the date the PMN was received by EPA, the projected end date for
EPA's review of the PMN, the submitting manufacturer/importer, the
potential uses identified by the manufacturer/importer in the PMN, and
the chemical identity.
Table I--99 PMNs Received From December 3, 2010 to January 31, 2010
----------------------------------------------------------------------------------------------------------------
Projected
Case No. Received date notice end Manufacturer/ Use Chemical
date importer
----------------------------------------------------------------------------------------------------------------
P-11-0091.............. 12/03/10 03/02/11 CBI.............. (G) Oil and water (G) Fluorinated
repellant and acrylic
release agent. alkylamino
copolymer.
P-11-0092.............. 12/03/10 03/02/11 CBI.............. (G) Oil and water (G) Fluorinated
repellant and acrylic
release agent. alkylamino
copolymer.
P-11-0093.............. 12/03/10 03/02/11 CBI.............. (G) Oil and water (G) Fluorinated
repellant and acrylic
release agent. alkylamino
copolymer.
P-11-0094.............. 12/07/10 03/06/11 CBI.............. (G) Dispersion (G) 2-
additive. naphthalenecarbo
xylic acid,
substituted
diazenyl calcium
salt.
P-11-0095.............. 12/08/10 03/07/11 Hybrid Plastics, (G) 1. (S)
Inc.. Thermoplastics Tricyclo[7.3.3.1
and coatings 5,11]heptasiloxa
additive; 2. ne-3,7,14-triol,
Elastomer 1,3,5,7,9,11,14-
additive. heptaphenyl.
P-11-0096.............. 12/08/10 03/07/11 AOC LLC.......... (S) Polymer (S) 1,4-
component for benzenedicarboxy
laminating of lic acid, 1,4-
fiberglass dimethyl ester,
reinforced polymer with 1,4-
plastic parts. cyclohexanedimet
hanol and
2,2,4,4-
tetramethyl-1,3-
cyclobutanediol,
manuf. of, by-
products from,
reaction
products with
ethylene glycol,
polymers with
1,4-
cyclohexanedimet
hanol,
diethylene
glycol, ethylene
glycol, maleic
anhydride and
phthalic
anhydride,
3a,4,5,6,7,7a-
hexahydro-4,7-
methano-1h-inden-
5(or 6)-yl
esters.
P-11-0097.............. 12/09/10 03/08/11 Reichhold, Inc... (S) Carrier resin (G) Amine salt of
for paints and vegetable oils,
coatings. polymer with
alkanedioic
acid, amino
substituted
alcohol, hydroxy
substituted
carboxylic acid,
alkanediol,
isocyanates,
hydroxy
substituted
alkane and tetra
hydroxy alkane.
P-11-0098.............. 12/09/10 03/08/11 CBI.............. (G) Epoxy (S) Phenol, 2-[1-
catalyst. [[3-(1h-imidazol-
1-
yl)propyl]imino]
ethyl]-
P-11-0099.............. 12/13/10 03/12/11 Huntsman Textile (S) Exhaust (G) Condensation
Effects. dyeing of cotton sodium/potassium
fabrics. salt reaction
product of
substituted
naphthalene
sulfonic acid
azo substituted
phenyl amino
substituted
triazine and
alkylsulfonyl
benzenesulfonic
acid azo
substituted
phenylamino
substituted
triazine.
P-11-0100.............. 12/10/10 03/09/11 CBI.............. (G) Scale (G)
inhibitor for Organicsulfonic
subterranean acid, sodium
oilfield brines. salt, polymer
with 2,5-
furandione, 2-
methyl-2-
propenoic acid
and 2-propenoic
acid, sodium
salt, hydrogen
peroxide- and
peroxydisulfuric
acid
([(ho)s(o)2o2
sodium salt
(1:2)-initiated.
P-11-0101.............. 12/10/10 03/09/11 CBI.............. (G) Scale (G)
inhibitor for Organicsulfonic
subterranean acid, sodium
oilfield brines. salt, polymer
with 2,5-
furandione, 2-
methyl-2-
propenoic acid
and 2-propenoic
acid, ammonium
salt, hydrogen
peroxide- and
peroxydisulfuric
acid
([(ho)s(o)2]2o2)
sodium salt
(1:2)-initiated.
[[Page 32191]]
P-11-0102.............. 12/10/10 03/09/11 CBI.............. (G) Scale (G)
inhibitor for Organicsulfonic
subterranean acid, sodium
oilfield brines. salt, polymer
with 2,5-
furandione,
methyl 2-methyl-
2-propenoate, 2-
methyl-2-
propenoic acid,
2-propenoic
acid, sodium 4-
ethylbenzene
sulfonate (1:1)
and sodium 2-
methyl-2-[(1-oxo-
2-propen-1-
yl)amino]-1-
propanesulfoate
(1:1), sodium
salt, hydrogen
peroxide- and
peroxydisulfuric
acid
([(ho)s(o)2]2o2)
sodium salt
(1:2)-initiated.
P-11-0103.............. 12/10/10 03/09/11 CBI.............. (G) Scale (G)
inhibitor for Organicsulfonic
subterranean acid, sodium
oilfield brines. salt, polymer
with 2,5-
furandione,
methyl 2-methyl-
2-propenoate, 2-
methyl-2-
propenoic acid,
2-propenoic
acid, sodium 4-
ethenylbenzene
sulfonate (1:1)
and sodium 2-
methyl-2-[(1-oxo-
2-propen-1-
yl)amino]-1-
propanesulfonate
(1:1)ammonium
salt, hydrogen
peroxide- and
peroxydisulfuric
acid
([(ho)s(o)2]2o2)
sodium salt
(1:2)-initiated.
P-11-0104.............. 12/10/10 03/09/11 CBI.............. (G) Scale (G)
inhibitor for Organicsulfonic
subterranean acid, sodium
oilfield brines. salt, polymer
with 1-methyl
hydrogen (2z)-2-
butenedioate, 2-
methyl-2-
propenoic acid,
1,2-propanedoil
mono(2-methyl-2-
propenoate) and
2-propenoic
acid, sodium
salt, tert-bu
hydroperoxide-
and hydrogen
peroxide-
initiated.
P-11-0105.............. 12/10/10 03/09/11 CBI.............. (G) Scale (G)
inhibitor for Organicsulfonic
subterranean acid, sodium
oilfield brines. salt, polymer
with 1-methyl
hydrogen (2z)-2-
butenedioate, 2-
methyl-2-
propenoic acid,
1,2-propanedoil
mono(2-methyl-2-
propenoate) and
2-propenoic
acid, ammonium
salt, tert-bu
hydroperoxide-
and hydrogen
peroxide-
initiated.
P-11-0106.............. 12/13/10 03/12/11 CBI.............. (S) Surfactant in (G) Unsaturated
asphalt emulsion. fatty acids,
amides with
polyethylenepoly
amine.
P-11-0107.............. 12/13/10 03/12/11 CBI.............. (S) Anti- (G) Fatty acids,
stripping agent amides with
in asphalt. triethylenetetra
mine.
P-11-0108.............. 12/13/10 03/12/11 Cytec Industries (S) Dispersing (G) Substituted
Inc.. additive for alkanoic acid,
organic and polymer with
inorganic alkanoic acid
pigments and alkyl esters,
extenders. with substituted
polyglycol-
initiated.
P-11-0109.............. 12/13/10 03/12/11 Cytec Industries (G) Coatings (G) Substituted
Inc.. resin. alkyl
homopolymer,
substituted
alkylacrylate
and
heteromonocyclic
homopolymer
monoester with
substituted
alkylacrylate.
P-11-0110.............. 12/13/10 03/12/11 CBI.............. (G) Inhibitor for (G) Tertiary
oil field ammonium
applications. compound.
P-11-0111.............. 12/03/10 03/02/11 CBI.............. (G) Urethane (G) Alkoxylated
component. triol polymer
with alkyl
anhydride.
P-11-0112.............. 12/14/10 03/13/11 Cytec Industries (G) Binder resin. (G) Modified
Inc.. epoxy resin.
P-11-0113.............. 12/14/10 03/13/11 CBI.............. (G) Ink additive (G)
used to assure Heteromonocyclo,
the ink binds to 4-methyl-,
the print media. oxide,
methanesulfonate
salt.
P-11-0114.............. 12/16/10 03/15/11 Mane, U.S.A...... (G) Perfumery (S) 2(3h)-
ingredient. furanone, 3-
ethyldihydro-5,5-
dimethyl-.
P-11-0115.............. 12/16/10 03/15/11 CBI.............. (G) Adhesive..... (G) MDI modified
polyester resin.
P-11-0116.............. 12/16/10 03/15/11 CBI.............. (G) Inkjet ink... (G) Carboxylic
acid, alkanoate
polymer with
ethenylbenzene
and 2-propenoic
acid, di-me 2,2'-
(1,2-
diazenediyl)bis[
2-
methylpropanoate
]-initiatied,
compds. with 2-
(dimethylamino)e
thanol.
P-11-0117.............. 12/16/10 03/15/11 CBI.............. (G) Dispersant... (G) Polyamine-
polymer graft
polymer.
P-11-0118.............. 12/16/10 03/15/11 CBI.............. (G) Component of (G) Methyl alkene
fragrance ester of benzoic
mixture for acid.
highly
dispersive
applications.
P-11-0119.............. 12/16/10 03/15/11 Dow Chemical (G) Component of (S) Oxirane, 2,2'-
Company. adhesive. (phenylene)bis-.
[[Page 32192]]
P-11-0120.............. 12/16/10 03/15/11 Dow Chemical (G) Component of (S) Oxirane, 2-
Company. adhesive. (ethylphenyl).
P-11-0121.............. 12/17/10 03/16/11 CBI.............. (G) Open, non- (G) Epoxidized
dispersive use. acrylic polymer.
P-11-0122.............. 12/20/10 03/19/11 CBI.............. (G) Additive, (G) Polyalkylene
open, non- glycol methyl-2-
dispersive use. propenoate,
polymer with
alkyl-
substituted 2-
propenoate.
P-11-0123.............. 12/20/10 03/19/11 CBI.............. (G) Additive, (G) Hydroxyalkyl
open, non- methacrylate,
dispersive use. reaction product
with cyclic
ether and cyclic
carbonic acid
anhydride.
P-11-0124.............. 12/20/10 03/19/11 CBI.............. (G) Additive, (G) Polyether
open, non- urethane block
dispersive use. copolymer.
P-11-0125.............. 12/20/10 03/19/11 CBI.............. (G) Plastics (G) Carbocyclic
additive. diesters.
P-11-0126.............. 12/20/10 03/19/11 AOC LLC.......... (S) Polymer (S) 1,3-
component for benzenedicarboxy
laminating of lic acid,
fiber reinforced polymers with by-
plastic products from
composites. manuf. of 1,4-
cyclohexanedimet
hanol-di-me
terephthalate-
2,2,4,4-
tetramethyl-1,3-
cyclobutanediol
polymer-ethylene
glycol reaction
products, 1,4-
cyclohexanedimet
hanol,
diethylene
glycol, ethylene
glycol, maleic
anhyride and
triethylene
glycol.
P-11-0127.............. 12/08/10 03/07/11 CBI.............. (G) Polymer for (G) Epoxidized
industrial fatty acids,
coatings. unsatd, me
esters, polymers
with
trimethylolpropa
ne.
P-11-0128.............. 12/21/10 03/20/11 Eastman Kodak (G) Contained use (S) 3h-indolium,
Company. in an article. 2-[2-[3-[2-(1,3-
Export. dihydro-1,3,3-
trimethyl-2h-
indol-2-
ylidene)ethylide
ne]-2-[(1-phenyl-
1h-tetrazol-5-
yl)thio]-1-
cyclohexen-1-
yl]ethenyl]-
1,3,3-trimethyl-
, chloride
(1:1).
P-11-0129.............. 12/22/10 03/21/11 CBI.............. (G) Additive, (G) Potassium
open, non- polyallylpolyeth
dispersive use. er maleate.
P-11-0130.............. 12/22/10 03/21/11 Eastman Kodak (S) Starting (S) 1-butanol, 4-
Company. material. amino-.
P-11-0131.............. 12/23/10 03/22/11 CBI.............. (G) Urethane (G) Isocyanate-
adhesive. terminated
prepolymer.
P-11-0132.............. 12/23/10 03/22/11 CBI.............. (G) Additive, (G) Polyether
open, non- urethane.
dispersive use.
P-11-0133.............. 12/23/10 03/22/11 CBI.............. (G) Engine oil (G) Alkyl
additive. alkenoate,
polymer with
alkyl alkenoate,
alkyl alkenoate,
alkyl
alkenoates,
(dialkylamino)al
kyl alkenoate
and
heteromonocyclic
alkyl alkenoate.
P-11-0134.............. 12/23/10 03/22/11 CBI.............. (G) Gear oil (G)
additive. Carbomonocyclic
alkene polymer
with alkyl
alkenoate, alkyl
alkenoate, alkyl
alkenoate, alkyl
alkenoate,
polyalkylidiene
alkenoate and
heteromonocyclic
alkene.
P-11-0135.............. 12/23/10 03/22/11 CBI.............. (G) Cleaning (G) Acid ester.
enhancer
additive for
laundry and auto
dish-washing
products.
P-11-0136.............. 12/29/10 03/28/11 CBI.............. (G) Flexible (G) Polyether
packaging polyester
adhesive. polyurethane
adhesive.
P-11-0137.............. 12/29/10 03/28/11 CBI.............. (G) Component of (G) Formaldehyde,
polyurethane reaction product
foam. with alkylphenol
and
dialkanolamine,
alkoxy
alkylated.
P-11-0138.............. 12/29/10 03/28/11 CBI.............. (S) Component of (G) Propylene
rigid oxide adduct of
polyurethane polyhydric
foam insulation. alcohol.
P-11-0139.............. 12/29/10 03/28/11 AGC Chemicals (S) Component of (G) Alkylene
Americas, Inc. rigid oxide adduct
polyurethane with glycerin.
insulation.
P-11-0140.............. 12/29/10 03/28/11 CBI.............. (G) Catalyst (G) Metal
intermediate. alkoxide.
P-11-0141.............. 12/30/10 03/29/11 CBI.............. (G) Colourant (G) Acrylic
dispersant. polymer.
P-11-0142.............. 12/30/10 03/29/11 CBI.............. (G) Colourant (G) Acrylic
dispersant. polymer.
P-11-0143.............. 12/30/10 03/29/11 CBI.............. (G) Colourant (G) Acrylic
dispersant. polymer.
P-11-0144.............. 01/03/11 04/02/11 CBI.............. (G) Colourant (G) Acrylic
dispersant. polymer.
P-11-0145.............. 01/03/11 04/02/11 CBI.............. (G) Colourant (G) Acrylic
dispersant. polymer.
P-11-0146.............. 01/03/11 04/02/11 CBI.............. (S) Coating for (G) Styrene-
metals. acrylic
copolymer.
P-11-0147.............. 01/03/11 04/02/11 CBI.............. (S) Ultra-violet (G) Uv-
(Uv)-curable curablepolyester
polymer for polyurethane
kitchen cabinet acrylate.
and office
furniture
finishes.
[[Page 32193]]
P-11-0148.............. 01/03/11 04/02/11 Ineos Oligomers.. (G) Industrial (S) Hydrocarbons,
applications. C4, 1,3-
butadiene-free,
polymd.,
triisobutylene
fraction,
hydrogenated.
P-11-0149.............. 01/04/11 04/03/11 Forbo Adhesives, (G) Hot melt (G) Isocyanate
LLC. adhesive. function
polyester
urethane
polymer.
P-11-0150.............. 01/04/11 04/03/11 CBI.............. (G) Battery (G) Alkali
materials. transition metal
oxide.
P-11-0151.............. 01/04/11 04/03/11 CBI.............. (G) Polymer (G) N-sulfoalkyl-
admixture for aminocarbonylalk
cements. enyl, polymer
modified with
N,N-dialkyl-
aminocarbonylalk
enyl, sodium
salt.
P-11-0152.............. 01/07/11 04/06/11 CBI.............. (G) Resin (open, (G) Polyester
non dispersive type
use). polyurethane
resin.
P-11-0153.............. 01/10/11 04/09/11 Steward Advanced (S) Adsorbent for (S) 1-
Materials. treating propanethiol, 3-
industrial (trimethoxysilyl
wastewater; )-, reaction
adsorbent for products with
removing silica.
catalysts in
pharmaceutical
production;
adsorbent for
removing
precious metals
in mining
operations;
adsorbent for
removing
contaminants
from water in
remediation
situations.
P-11-0154.............. 01/10/11 04/09/11 Huntsman Textile (S) Exhaust (G) Dioxy difuran
Effects. dyeing of phenyl ethoxy
polyester ester compound.
fabrics.
P-11-0155.............. 12/02/10 03/01/11 CBI.............. (G) Colorant for (G) Polymer
cleaners and substituted
detergents. anthraquinone
derivative.
P-11-0156.............. 01/10/11 04/09/11 Nanotech (S) Flooring; (S) Carbamic
Industries, Inc. paints; top acid, N,N'-
coating. (trimethyl-1,6-
hexanediyl)bis-,
ester with 1,2-
propanediol
(1:2).
P-11-0157.............. 01/10/11 04/09/11 Gellner (S) Acrylic (S) 2-propenoic
Industrial, LLC. polymer for acid, 2-methyl-,
concrete 2-
coatings, stain (dimethylamino)e
blocking sealer. thyl ester,
polymer with
ethyl 2-
propenoate, 2-
hydroxyethyl 2-
propenoate and
methyl 2-methyl-
2-propenoate
(9cl).
P-11-0158.............. 01/11/11 04/10/11 CBI.............. (G) Inhibitor for (G) Tertiary
oil field ammonium
applications. compound.
P-11-0159.............. 01/11/11 04/10/11 Apollo Chemical.. (S) Flame (S) Guanidine
retardant for phosphate.
synthetic and
cellulosic
fabrics.
P-11-0160.............. 01/12/11 04/11/11 CBI.............. (G) Open, non- (G) Acrylated
dispersive fatty acid
(resin). glycerides.
P-11-0161.............. 01/12/11 04/11/11 CBI.............. (G) Open, non (G) Polyurethane
dispersive acrylate resin.
coating.
P-11-0162.............. 01/13/11 04/12/11 Esstech, Inc..... (S) Adhesive (S) 5-
monomer. isobenzofurancar
boxylic acid,
1,3-dihydro-1,3-
dioxo-,2-[(2-
methyl-1-oxo-2-
propen-1-
yl)oxy]ethyl
ester.
P-11-0163.............. 01/18/11 04/17/11 CBI.............. (G) Open, non- (G) Epoxidized
dispersive use. acrylic polymer.
P-11-0164.............. 01/19/11 04/18/11 CBI.............. (G) Rheology (G) 2-propenoic
control agent. acid, 2-methyl-,
aminoalkyl
ester, polymer
with et
acrylate, 2-
hydroxyethyl
methacrylate,
polyethylene
glycol
methacrylate
alkyl ether and
polyethylene-
polypropylene
glycol alkyl
ether.
P-11-0165.............. 01/20/11 04/19/11 CBI.............. (G) Automotive (G) Isocyanate
coatings. homopolymer,
alkoxysilyl
amine blocked.
P-11-0166.............. 01/20/11 04/19/11 CBI.............. (G) Surfactant... (G) Fatty acids,
esters with
polyalkylene
glycol mono
alkyl ether.
P-11-0167.............. 01/21/11 04/20/11 CBI.............. (G) Polyurethane (G) Aromatic
component. isocyanate
polymer with
alkyldioic acid,
polyol, and
unsaturated
alkyl acid.
P-11-0168.............. 01/24/11 04/23/11 CBI.............. (S) Reinforcing (G) Silanized
filler for the amorphous
production of silica.
rubber goods.
P-11-0169.............. 01/20/11 04/19/11 CBI.............. (G) Uv absorber (G) Alkyl aryl
for coatings. substituted
pyrrolo
benzotriazole
dione.
[[Page 32194]]
P-11-0170.............. 01/21/11 04/20/11 CBI.............. (S) Reactive (G) Methacrylated
dilluent and lauric acid;
toughening agent methacrylate
for polyester fatty acid;
and vinyl mlau.
composites made
via molding;
auto, marine,
windmill and
other structural
composite repair
putty.
P-11-0171.............. 01/21/11 04/20/11 CBI.............. (S) Reactive (G) Methacrylated
dilluent and caprylic acid;
toughening agent methacrylate
for polyester fatty acid;
and vinyl mcap.
composites made
via molding;
auto, marine,
windmill and
other structural
composite repair
putty.
P-11-0172.............. 01/21/11 04/20/11 CBI.............. (S) Reactive (G) Methacrylated
dilluent and C8-18 fatty
toughening agent acids;
for polyester methacrylate
and vinyl fatty acids;
composites made mc818.
via molding;
auto, marine,
windmill and
other structural
composite repair
putty.
P-11-0173.............. 01/26/11 04/25/11 CBI.............. (G) Coatings for (G) Polyurethane
wooden floors. dispersion in
water.
P-11-0174.............. 01/26/11 04/25/11 CBI.............. (G) Coatings for (G) Polyurethane
textile. dispersion in
water.
P-11-0175.............. 01/25/11 04/24/11 CBI.............. (G) Flow improver (G) Polyglycerol
fatty acid
ester.
P-11-0176.............. 01/26/11 04/25/11 CBI.............. (G) Coatings for (G) Polyurethane
wooden floors. dispersion in
water.
P-11-0177.............. 01/26/11 04/25/11 CBI.............. (G) Coatings for (G) Polyurethane
paper. dispersion in
water.
P-11-0178.............. 01/26/11 04/25/11 CBI.............. (G) Cross-linker (G) Blocked
for industrial isocyanate in
coating organic solvent.
application.
P-11-0179.............. 01/26/11 04/25/11 CBI.............. (G) Crosslinking (G) Water
product for use dispersed
in industrial blocked
coatings. isocyanate.
P-11-0180.............. 01/28/11 04/27/11 CBI.............. (G) Modifier for (S) Phosphonic
polymers. acid, p-octyl-,
zinc salt (1:1).
P-11-0181.............. 01/31/11 04/30/11 Raindance (G) Surfactant (G)
Technologies, for laboratory Fluorosurfactant
Inc.. use fluid. .
P-11-0182.............. 01/31/11 04/30/11 CBI.............. (G) Component of (S) Poly(oxy-1,4-
a one part heat butanediyl),
cured, high .alpha.-hydroxy-
structural, .omega.-hydroxy-
impact modified , polymers with
adhesive for hydroxy-
metal assembly. terminated
polybutadiene
and 5-isocyanato-
1-
(isocyanatomethy
l)-1,3,3-
trimethylcyclohe
xane, 4-
methoxyphenol-
blocked.
P-11-0183.............. 01/27/11 04/26/11 CBI.............. (G) Automotive (G) Acid alkyl
coatings. monoester,
heterocyclic
compd.; acid
alkyl diester,
heterocyclic
compd.; acid
alkyl monoester,
heterocyclic
compound; acid
alkyl diester,
heterocyclic
compound.
P-11-0184.............. 01/27/11 04/26/11 CBI.............. (G) Automotive (G) Acid alkyl
coatings. monoester,
compd. with
alkyl amine;
acid alkyl
diester, compd.
with alkyl
amine; acid
alkyl monoester,
compd. with
alkyl amine;
acid alkyl
diester, compd.
with alkyl
amine.
P-11-0185.............. 01/31/11 04/30/11 CBI.............. (G) Hydrocarbon (G) Oil derived
feed stock for from the
fuel.. pyrolysis of
rubber tire
shreds.
P-11-0186.............. 01/31/11 04/30/11 CBI.............. (G) Provide (G) Infused
multifunctional carbon
performance nanostructures
attributes to (CNS).
reinforcements
used in
composites.
P-11-0187.............. 01/31/11 04/30/11 CBI.............. (G) Provide (G) Infused
multifunctional carbon
performance nanostructures
attributes to (CNS).
reinforcements
used in
composites.
P-11-0188.............. 01/31/11 04/30/11 CBI.............. (G) Provide (G) Infused
multifunctional carbon
performance nanostructures
attributes to (CNS).
reinforcements
used in
composites.
[[Page 32195]]
P-11-0189.............. 01/13/11 04/12/11 Evans Chemetics (G) Coating (S) Acetic acid,
LP. applied to metal 2,2'-dithiobis-'
substrates. diammonium salt.
----------------------------------------------------------------------------------------------------------------
In Table II. of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the NOCs
received by EPA during this period: The EPA case number assigned to the
NOC, the date the NOC was received by EPA, the projected end date for
EPA's review of the NOC, and chemical identity.
Table II--77 NOCs Received From December 3, 2010 to January 31, 2011
------------------------------------------------------------------------
Commencement
Case No. Received date notice end date Chemical
------------------------------------------------------------------------
P-09-0554............ 11/18/10 10/24/10 (S) Fuels,
diesel, C9 18-
alkane
branched and
linear.
P-09-0565............ 11/24/10 11/15/10 (G)
Hydrophobicall
y modified
cationic
polyamide
resin.
P-09-0574............ 11/10/10 10/11/10 (G) Acrylic
based
copolymer.
P-09-0589............ 10/13/10 10/06/10 (G)
Oximosilane.
P-09-0590............ 12/02/10 10/06/10 (G)
Oximosilane.
P-09-0632............ 12/07/10 12/02/10 (G)
Polyphosphonat
e.
P-09-0633............ 12/07/10 11/22/10 (G) Isocyanate
functional
polyester
urethane
polymer.
P-10-0005............ 12/30/10 12/01/10 (S) Single-wall
carbon
nanotube.
P-10-0008............ 12/01/10 11/15/10 (G) Distillates
(petroleum),
light thermal
cracked,
reaction
products with
phenol,
carboxylated,
metal salts.
P-10-0024............ 11/30/10 05/10/10 (G) Substituted
benzoyl
chloride.
P-10-0026............ 11/30/10 05/15/10 (G) Salt of
condensation
product of
substituted
pyrazolone.
P-10-0060............ 10/28/10 10/17/10 (G) Partially
fluorinated
alcohol
substituted
glycol.
P-10-0096............ 12/22/10 11/17/10 (G) Aminated
epoxy salts.
P-10-0097............ 12/22/10 11/19/10 (G) Aminated
epoxy salt.
P-10-0099............ 12/07/10 11/24/10 (S) Phosphonic
acid, p-octyl-
, lanthanum
(3+) salt
(2:1)*.
P-10-0105............ 11/22/10 10/12/10 (S) 1,2-
cyclohexane
dicarboxylic
acid bis (2-
ethylhexyl)
ester*.
P-10-0127............ 12/22/10 11/23/10 (G) Blocked
isocyanate
crosslinker.
P-10-0136............ 12/01/10 11/10/10 (G) Polythiol.
P-10-0148............ 11/16/10 10/22/10 (G) Partially
fluorinated
borate ester.
P-10-0168............ 11/04/10 10/22/10 (G) Polyester
polyurethane.
P-10-0173............ 11/10/10 11/09/10 (G)
Vinylimidazole
(vima) grafted
poly alpha
olefin (pao)
complexed with
diisopropoxy
titanium bis-
acetylacetonat
e.
P-10-0215............ 10/14/10 09/21/10 (G) Silane
modified
polymer.
P-10-0224............ 12/29/10 12/11/10 (G) 4,4'-
bipridinium, 1-
(phosphonoalky
l)-1'-
substituted-,
salt with
anion (1:2).
P-10-0225............ 10/25/10 10/06/10 (G) Aromatic
isocyanate
prepolymer.
P-10-0249............ 01/18/11 12/28/10 (G) Methyl
methacrylate
butylmethylacr
ylate styrene
divinylbenzene
copolymer.
P-10-0282............ 01/31/11 01/12/11 (G) Maleated
nylon graft
copolymer.
P-10-0283............ 01/20/11 12/17/10 (G) Maleated
nylon graft
copolymer.
P-10-0294............ 11/29/10 11/20/10 (G) Unsaturated
urethane
acrylate.
P-10-0302............ 12/07/10 11/24/10 (G) Fatty acid
amine salt.
P-10-0303............ 12/29/10 12/11/10 (G)
Heterocycle,
disubstituted,
salt with
anion (1:1).
P-10-0317............ 10/18/10 10/07/10 (G) Fluoroalkyl
acrylate
copolymer.
P-10-0324............ 12/03/10 11/09/10 (G) Urea, N,N'-
(methyl-1,3-
phenylene)bis[
N',N'-bis[3-
(polyalkylenea
mino]-,
compound with
formaldehyde
polymer with
phenol.
P-10-0325............ 10/07/10 09/20/10 (G) Neodymium
ziegler-natta
catalyst.
P-10-0329............ 11/24/10 11/11/10 (S)
Hexadecanamide
, N-[3-
(hexadecyloxy)-
2-
hydroxypropyl]-
N-(2-
hydroxyethyl)-
*.
P-10-0332............ 12/09/10 11/09/10 (G) Amino
alcohol
substituted
phenol.
P-10-0335............ 10/15/10 10/05/10 (G) Polyester
type urethane
resin.
P-10-0355............ 12/29/10 12/15/10 (S)
Cyclohexanecar
boxylic acid,
3-methyl-,
methyl ester,
(1R, 3R)-rel-
*.
P-10-0359............ 12/15/10 11/18/10 (G)
Heterocyclic
salt.
P-10-0371............ 10/21/10 10/03/10 (G)
Alkoxysilane.
P-10-0373............ 11/09/10 11/04/10 (G) Adipic acid
polyester.
P-10-0375............ 11/04/10 10/15/10 (G) Dimer fatty
acid based
polyester
polyurethane.
P-10-0388............ 10/06/10 08/23/10 (G) 2-propenoic
acid, 2-methyl-
, polymer with
alkyl 2-
propenoates,
ethenyl
acetate and
methyl-2-
methyl-2-
propenoate.
P-10-0389............ 10/04/10 09/08/10 (G) Amino acid,
N-(2-
aminoalkyl)-,
salt (1:1),
polymers with
cycloaliphatic
diamine,
alkyldiisocyan
ate, alpha-
hydro-omega-
hydroxy(alkyld
iyl) and
polyalkyl
glycol mono
alkyl ether
blocked,
alkyldiisocyan
ate-aromatic
diisocyanate,
polyalkyl
glycol mono
alkyl ether
blocked.
P-10-0394............ 10/07/10 09/28/10 (G) Aromatic
carboxylic
acid.
P-10-0395............ 10/07/10 10/01/10 (G) Organic
carboxylic
acid.
P-10-0396............ 10/25/10 10/03/10 (G)
Heteroaromatic
compound.
P-10-0397............ 10/25/10 10/21/10 (G) Organic
antioxidant.
P-10-0409............ 12/03/10 11/11/10 (G) Haloalkyl
substituted
pyridine
sulfide.
[[Page 32196]]
P-10-0412............ 10/14/10 09/17/10 (G) Acrylic
polymer.
P-10-0418............ 01/14/11 12/15/10 (G) Aromatic
dicarboxylic
acid, polymer
with
cycloaliphatic
diamine,
aliphatic
diisocyanate,
aliphatic
dicarboxylic
acid,
aliphatic
diol,
polyether
diol, and
dihydroxy
aliphatic
carboxylic
acid compound
compound with
aliphatic
triamine.
P-10-0430............ 10/06/10 09/28/10 (G) Urethane
acrylate.
P-10-0431............ 10/28/10 10/08/10 (G) Soybean oil
polyol.
P-10-0432............ 12/14/10 12/13/10 (G) Acrylated
aliphatic
polyurethane.
P-10-0434............ 01/05/11 12/09/10 (G)
Polyurethane
dispersion.
P-10-0436............ 12/13/10 11/02/10 (G) Unsaturated
polyester
resin.
P-10-0443............ 10/28/10 10/22/10 (G)
Carbomonocycli
c dicarboxylic
acid, polymer
with 1,2-
ethanediol, 2-
ethyl-2-
(hydrooxymethy
l)-1,3-propane
derivatives,
4,4'-(1-
methylethylide
ne)bis[cyclohe
xanol] and
1,2,3-
propanetriol.
P-10-0446............ 11/03/10 10/29/10 (S) Terpenes
and
terpenoids,
mint, metha
arvensis-oil,
acetylated*.
P-10-0448............ 11/16/10 10/26/10 (S) 1,4-
benzenedicarbo
xylic acid,
1,4-dimethyl
ester, polymer
with 1,4-
cyclohexanedim
ethanol and
2,2,4,4-
tetramethyl-
1,3-
cyclobutanedio
l, manuf. of,
by-products
from, reaction
products with
ethylene
glycol*.
P-10-0461............ 01/07/11 12/28/10 (G)
Polyalkylene
carbonatediol.
P-10-0473............ 12/23/10 11/29/10 (G)
Polycarbonate
and polyester-
type
polyurethane.
P-10-0477............ 12/01/10 11/03/10 (G) Inorganic
carbonate
reaction
products with
substituted
alkyl ether.
P-10-0488............ 11/17/10 11/10/10 (G)
Poly(urethane
urea).
P-10-0490............ 11/18/10 11/07/10 (G) Dimer fatty
acid, polymer
with tall-oil
fatty acid,
alkyl diacid
and
alkyldiamines.
P-10-0491............ 01/06/11 12/15/10 (G) Amphoteric
acrylic
polymer.
P-10-0493............ 12/23/10 11/12/10 (G) Bisphenol A
epoxy hema
phthalate.
P-10-0498............ 01/05/11 12/06/10 (S) Dodecanoic
acid, 3-[[3-
[[[2,2-
dimethyl-3-[(1-
oxododecyl)oxy
]propylidene]a
mino]methyl]-
3,5,5-
trimethylcyclo
hexyl]imino]-
2,2-
dimethylpropyl
ester*.
P-10-0516............ 01/28/11 01/21/11 (G) Alkanoic
acid ester,
polymers with
alkanolamine
and
substituted
acrylate-
blocked
substituted
polyalkylene-
urethane
polymer.
P-10-0522............ 01/19/11 01/15/11 (G) Polymer
with aromatic
polycarboxylic
acid,
aliphatic
polycarboxylic
acid and
aliphatic
polyol.
P-10-0526............ 01/14/11 01/13/11 (G)
Methacrylate
co-polymer.
P-10-0528............ 01/18/11 01/12/11 (G) Urethane
acrylate.
P-10-0586............ 01/31/11 01/05/11 (G) Isocyanate
terminated
urethane
polymer.
P-10-0587............ 01/31/11 01/06/11 (G) Isocyanate
terminated
urethane
polymer.
P-10-0590............ 01/20/11 01/17/11 (G) Modified
ketal ester.
P-11-0015............ 01/27/11 01/26/11 (S)
Cyclohexanepen
tanol, -methyl-
*.
P-98-0687............ 11/15/10 10/14/10 (G) Polyolefin
phenol
ethoxylate.
P-99-1008............ 10/12/10 09/15/10 (G) Polyimide
precursor
solution.
------------------------------------------------------------------------
If you are interested in information that is not included in these
tables, you may contact EPA as described in Unit II. to access
additional non-CBI information that may be available.
List of Subjects
Environmental protection, Chemicals, Hazardous substances, Imports,
Notice of commencement, Premanufacturer, Reporting and recordkeeping
requirements, Test marketing exemptions.
Dated: May 23, 2011.
Matthew Leopard,
Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2011-13672 Filed 6-2-11; 8:45 am]
BILLING CODE 6560-50-P