[Federal Register Volume 76, Number 59 (Monday, March 28, 2011)]
[Notices]
[Pages 17135-17136]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2011-7211]


-----------------------------------------------------------------------

DEPARTMENT OF HEALTH AND HUMAN SERVICES

Food and Drug Administration

[Docket No. FDA-2011-N-0148]


Clarifying Edits to Existing Special Controls Guidance Documents; 
Availability

AGENCY: Food and Drug Administration, HHS.

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: The Food and Drug Administration (FDA) is announcing the 
availability of updated special controls guidance documents for class 
II devices, which contain edits that reflect the Agency's effort to 
clarify questions and confusion regarding its position on the binding 
nature of special controls guidance documents. The revised language 
does not change the Agency's position or view, but rather is intended 
to clarify its position and remedy any possible confusion or 
misunderstanding.

DATES: Submit either electronic or written comments on this document at 
any time. General comments on Agency guidance documents are welcome at 
any time.

ADDRESSES: See the SUPPLEMENTARY INFORMATION section for electronic 
access to affected documents.
    Submit electronic comments on this document to http://www.regulations.gov. Submit written comments to the Division of Dockets 
Management (HFA-305), Food and Drug Administration, 5630 Fishers Lane, 
rm. 1061, Rockville, MD 20852. Identify comments with the docket number 
found in brackets in the heading of this document.

FOR FURTHER INFORMATION CONTACT: Philip Desjardins, Center for Devices 
and Radiological Health, Food and Drug Administration, 10903 New 
Hampshire Ave., Bldg. 66, rm. 5452, Silver Spring, MD 20993-0002, 301-
796-5678; or Stephen Ripley, Center for Biologics Evaluation and 
Research (HFM-17), Food and Drug Administration, 1401 Rockville Pike, 
suite 200N, Rockville, MD 20852, 301-827-6210.

SUPPLEMENTARY INFORMATION:

I. Background

    In December 2008, FDA revised the cover sheet and standard language 
in newly issued special controls guidance documents to clarify the 
effect of a guidance that has been established as a special control 
(``special controls guidance''). In order to comply with the special 
controls guidance, manufacturers must address each identified risk to 
health presented in the guidance for the class II device by either 
meeting the recommendations of the guidance or by some other means that 
provides equivalent assurances of safety and effectiveness.
    FDA is now updating all pre-December 2008 special controls guidance 
documents with the revised standard language. Revisions to the special 
controls guidance documents include clarifying the statement of the 
special controls guidance document's effect by replacing the standard 
language with the following statement: ``The firm must show that its 
device addresses the issues of safety and effectiveness identified in 
this guidance, either by meeting the recommendations of this guidance 
or by some other means that provides equivalent assurances of safety 
and effectiveness.''
    Special controls guidance documents on the following topics have 
been affected: \1\
---------------------------------------------------------------------------

    \1\ All guidance titles throughout this document reflect the 
style of the published versions.
---------------------------------------------------------------------------

    1. Acute Upper Airway Obstruction Devices,
    2. Clitoral Engorgement Devices,
    3. Anti-Saccharomyces cerevisiae (S. cerevisiae) Antibody (ASCA) 
Premarket Notifications,
    4. Shoulder Joint Metal/Polymer/Metal Nonconstrained or Semi-
Constrained Porous-Coated Uncemented Prosthesis,
    5. B-Type Natriuretic Peptide Premarket Notifications,
    6. Home Uterine Activity Monitors,
    7. Pharmacy Compounding Systems,
    8. Tissue Culture Media for Human ex vivo Tissue and Cell Culture 
Processing Applications,
    9. Indwelling Blood Gas Analyzers,
    10. Ingestible Telemetric Gastrointestinal Capsule Imaging System,
    11. Premarket Notifications for Automated Differential Cell Counter 
for Immature or Abnormal Blood Cells,
    12. Medical Washers and Medical Washer-Disinfectors,

[[Page 17136]]

    13. Endolymphatic Shunt Tube with Valve,
    14. Hip Joint Metal/Polymer Constrained Cemented or Uncemented 
Prosthesis,
    15. Apnea Monitors,
    16. Polymethylmethacrylate (PMMA) Bone Cement,
    17. Cyclosporine and Tacrolimus Assays,
    18. Transcutaneous Air Conduction Hearing Aid System (TACHAS),
    19. Intraoral Devices for Snoring and/or Obstructive Sleep Apnea,
    20. Cutaneous Carbon Dioxide and Oxygen Monitors,
    21. Knee Joint Patellofemorotibial and Femorotibial Metal/Polymer 
Porous-Coated Uncemented Prostheses,
    22. Optical Impression Systems for Computer Assisted Design and 
Manufacturing (CAD/CAM) of Dental Restorations,
    23. Resorbable Calcium Salt Bone Void Filler Device,
    24. Surgical Sutures,
    25. Breath Nitric Oxide Test,
    26. Breast Lesion Documentation System,
    27. Arrhythmia Detector and Alarm,
    28. Serological Reagents for the Laboratory Diagnosis of West Nile 
Virus,
    29. Endotoxin Assay,
    30. Dental Sonography and Jaw Tracking Devices,
    31. Human Dura Mater (applicable to dura mater recovered before May 
25, 2005),
    32. Hepatitis A Virus Serological Assays,
    33. Factor V Leiden DNA Mutation Detection Systems,
    34. Immunomagnetic Circulating Cancer Cell Selection and 
Enumeration System,
    35. Root-form Dental Implants and Endosseous Dental Implant 
Abutments,
    36. Dental Base Metal Alloys,
    37. Dental Noble Metal Alloys,
    38. Serological Assays for the Detection of Beta-Glucan,
    39. Sirolimus Test Systems,
    40. Newborn Screening Test Systems for Amino Acids, Free Carnitine, 
and Acylcarnitines Using Tandem Mass Spectrometry,
    41. Implantable Radiofrequency Transponder System for Patient 
Identification and Health Information,
    42. External Penile Rigidity Devices,
    43. Assisted Reproduction Laser Systems,
    44. Vascular and Neurovascular Embolization Devices,
    45. Drug Metabolizing Enzyme Genotyping System,
    46. Instrumentation for Clinical Multiplex Test Systems,
    47. Automated Fluorescence in situ Hybridization (FISH) Enumeration 
Systems,
    48. Dental Bone Grafting Material Devices,
    49. RNA Preanalytical Systems (RNA Collection, Stabilization and 
Purification Systems for RT-PCR used in Molecular Diagnostic Testing),
    50. Oral Rinse to Reduce the Adhesion of Dental Plaque,
    51. AFP-L3% Immunological Test Systems,
    52. CFTR Gene Mutation Detection System,
    53. Low Energy Ultrasound Wound Cleaner,
    54. Tinnitus Masker Devices,
    55. Labeling for Male Condoms Made of Natural Rubber Latex,
    56. Implantable Intra-Aneurysm Pressure Measurement System,
    57. Reagents for Detection of Specific Novel Influenza A Viruses,
    58. Topical Oxygen Chamber for Extremities,
    59. Olfactory Test Device,
    60. Fecal Calprotectin Immunological Test Systems,
    61. Absorbable Hemostatic Device,
    62. Quality Control Material for Cystic Fibrosis Nucleic Acid 
Assays,
    63. Oxygen Pressure Regulators and Oxygen Conserving Devices,
    64. Herpes Simplex Virus Types 1 and 2 Serological Assays,
    65. Computerized Labor Monitoring Systems,
    66. Gene Expression Profiling Test System for Breast Cancer 
Prognosis,
    67. Intervertebral Body Fusion Device,
    68. Filtering Facepiece Respirator for Use by the General Public in 
Public Health Medical Emergencies,
    69. Absorbable Poly(hydroxybutyrate) Surgical Suture Produced by 
Recombinant DNA Technology,
    70. In Vitro Human Immunodeficiency Virus (HIV) Drug Resistance 
Genotype Assay,
    71. Electrocardiograph Electrodes,
    72. Remote Medication Management System,
    73. Automated Blood Cell Separator Device Operating by Centrifugal 
or Filtration Separation Principle,
    74. Plasmodium Species Antigen Detection Assays,
    75. Full Field Digital Mammography System,
    76. Certain Percutaneous Transluminal Coronary Angioplasty (PTCA) 
Catheters,
    77. Tissue Adhesive for the Topical Approximation of Skin,
    78. Bone Sonometers,
    79. Tissue Expander,
    80. Cord Blood Processing System and Storage Container.

II. Electronic Access

    Persons interested in obtaining a copy of any revised special 
controls guidance document may do so by using the Internet. A search 
capability for all CDRH guidance documents is available at http://www.fda.gov/MedicalDevices/DeviceRegulationandGuidance/GuidanceDocuments/default.htm. To receive any affected CDRH guidance 
you may either send an email request to [email protected] to receive 
an electronic copy of the document or send a fax request to 301-847-
8149 to receive a hard copy.
    For CBER guidances, you may send a request to the Office of 
Communication, Outreach and Development (HFM-40), Center for Biologics 
Evaluation and Research (CBER), Food and Drug Administration, 1401 
Rockville Pike, suite 200N, Rockville, MD 20852-1448. The guidance may 
also be obtained by mail by calling CBER at 1-800-835-4709 or 301-827-
1800. In addition, CBER guidance documents are available at http://www.fda.gov/BiologicsBloodVaccines/GuidanceComplianceRegulatoryInformation/default.htm.

III. Comments

    Interested persons may submit to the Division of Dockets Management 
(see ADDRESSES) either electronic or written comments regarding this 
document. It is only necessary to send one set of comments. It is no 
longer necessary to send two copies of mailed comments. Identify 
comments with the docket number found in brackets in the heading of 
this document. Received comments may be seen in the Division of Dockets 
Management between 9 a.m. and 4 p.m., Monday through Friday.

    Authority:  21 U.S.C. 371(h).

    Dated: March 23, 2011.
David Dorsey,
Acting Deputy Commissioner for Policy, Planning and Budget.
[FR Doc. 2011-7211 Filed 3-25-11; 8:45 am]
BILLING CODE 4160-01-P