[Federal Register Volume 75, Number 249 (Wednesday, December 29, 2010)]
[Proposed Rules]
[Pages 81943-81948]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2010-32577]


=======================================================================
-----------------------------------------------------------------------

FEDERAL TRADE COMMISSION

16 CFR Part 305

RIN 3084-AB03


Appliance Labeling Rule

AGENCY: Federal Trade Commission (FTC or Commission).

ACTION: Proposed rule; request for comment.

-----------------------------------------------------------------------

SUMMARY: The Commission proposes changing the effective date for its 
new light bulb labeling requirements (published on July 19, 2010, 75 FR 
41696) to January 1, 2012, to provide manufacturers with additional 
time to incorporate the new label on their packaging. The Commission 
also proposes not requiring the new label for incandescent bulbs (e.g., 
75 watt bulbs) that, as of 2013, will not meet federal energy 
efficiency standards.

DATES: Written comments must be received on or before January 28, 2011.

ADDRESSES: Interested parties are invited to submit written comments 
electronically or in paper form by following the instructions in 
section III of the SUPPLEMENTARY INFORMATION section below. Comments in 
electronic form should be submitted using the following weblink: 
https://ftcpublic.commentworks.com/ftc/lightbulblabel (and following 
the instructions on the Web-based form). Comments filed in paper form 
should be mailed or delivered to the following address: Federal Trade 
Commission, Office of the Secretary, Room H-113 (Annex N), 600 
Pennsylvania Avenue, NW., Washington, DC 20580, in the manner detailed 
in the SUPPLEMENTARY INFORMATION section below.

FOR FURTHER INFORMATION CONTACT: Hampton Newsome, Attorney, Division of 
Enforcement, Bureau of Consumer Protection, Federal Trade Commission, 
600 Pennsylvania Avenue, NW., Washington, DC 20580, (202) 326-2889.

SUPPLEMENTARY INFORMATION: 

I. Background

    The Energy Independence and Security Act of 2007 (Pub. L. 110-140) 
(EISA) directed the Commission to consider the effectiveness of its 
current labeling requirements for ``lamps,'' commonly referred to as 
light bulbs, and alternative labeling approaches.\1\ Pursuant to this 
mandate, on July 19, 2010 (75 FR 41696), the Commission published 
amendments to the Appliance Labeling Rule (Rule) creating new labeling 
requirements for general service lamps (i.e., medium screw base 
incandescent, compact fluorescent (CFL), and light-emitting diode (LED) 
products). These requirements become effective on July 19, 2011. The 
new requirements feature a ``Lighting Facts'' label that will provide 
consumers with information on a bulb's brightness, annual energy cost, 
life, color appearance, and energy use.
---------------------------------------------------------------------------

    \1\ This document uses the terms lamp, light bulb, and bulb 
interchangeably.

---------------------------------------------------------------------------

[[Page 81944]]

II. NEMA Petition and the Commission's Proposed Amendments

    On October 27, 2010, the National Electrical Manufacturers 
Association (NEMA) submitted a Petition asking for changes to the new 
requirements.\2\ NEMA is a trade association for the electrical 
manufacturing industry. NEMA's lamp manufacturers make and sell a 
substantial majority of the general service lamps affected by the 
revised Rule. Specifically, citing burdens that it failed to raise 
prior to the issuance of the revised Rule, NEMA asks the Commission to 
make four changes to the labeling requirements: (1) Extend the 
effective date for new labeling for all covered bulbs, except CFLs, to 
January 1, 2012; (2) extend the effective date for CFLs until January 
1, 2013; (3) exempt all incandescent bulbs that will be phased out by 
2014 due to revised federal energy efficiency standards; and (4) make 
certain changes to the label formatting requirements, particularly for 
smaller packages.\3\
---------------------------------------------------------------------------

    \2\ NEMA's Petition is available on the Commission's Web site at 
http://www.ftc.gov/os/2010/10/101027nemapetition.pdf.
    \3\ As discussed in detail below, the Commission received 
letters in response to NEMA's Petition from Earthjustice and the 
Natural Resources Defense Council (NRDC). Earthjustice's November 
15, 2010 letter, submitted on behalf of Public Citizen and the 
Sierra Club, is available at http://www.ftc.gov/os/2010/11/101115earthjusticelightlabeling.pdf. NRDC's letter, which is also 
signed by representatives of the American Council for Energy 
Efficient Economy, Appliance Standards Awareness Project, and the 
Alliance to Save Energy, is available at http://www.ftc.gov/os/2010/11/101110advocatenema.pdf.
---------------------------------------------------------------------------

    In response, the Commission proposes to extend the Rule's effective 
date for all covered bulbs to January 1, 2012, but does not propose 
extending the effective date further for CFLs. The Commission also 
proposes exempting incandescent bulbs subject to federal efficiency 
standards in place by 2013, but not bulbs that will continue to be 
manufactured until 2014. In addition, the Commission does not propose 
any changes to the Rule's format requirements. The Commission seeks 
comment on these proposals.

A. Effective Date Extension For All Covered Bulbs

    NEMA's Request: In its Petition, NEMA states that the current 
effective date of July 19, 2011, which provides manufacturers one year 
to comply with the revised Rule, is inadequate for several reasons not 
detailed in its earlier comments.\4\ First, NEMA asserts that 
manufacturers now produce many more models than when the Commission 
last made comprehensive changes to its labeling requirements in 1994, 
which provided manufacturers with one year to comply.\5\ This 
substantial increase--from as many as 1,500 packaging styles per full-
line bulb manufacturer in 1994 to as many as 3,500 packaging styles 
today--greatly increases the burden on manufacturers, and, thus, 
requires more time to implement. Second, the supply chain to U.S. 
retail shelves is much longer and more complex than in 1994 because a 
large number of packages impacted by the Rule, including almost all 
CFLs, are now manufactured and packaged in Asia. NEMA asserts that 
these extended supply chains make implementation of labeling changes 
much more logistically challenging. NEMA also states that, as a 
practical matter, the fact that most bulbs are now imported makes 
timely compliance with the Rule more difficult because manufacturers 
must not only package their bulbs with the new label, but do so prior 
to shipping and importing them into the United States.\6\ Third, NEMA 
contends that the new content requirements are much more extensive than 
those issued in 1994, and, thus, will require many more packages to be 
completely redesigned.\7\ Fourth, NEMA explains that manufacturers need 
additional time to work with retail stores to ensure that their revised 
packages are compatible with existing retail displays.
---------------------------------------------------------------------------

    \4\ In its earlier comments, NEMA requested a one to two year 
period to comply with the new labeling requirements.
    \5\ 59 FR 25176 (May 13, 1994).
    \6\ Pursuant to the revised rule, after the effective date, 
bulbs cannot be manufactured or imported without the new label. 
Thus, in order to import bulbs made outside the United States by the 
effective date, they must be manufactured with the new label some 
time earlier.
    \7\ The 1994 label requires only lumens, watts, and life 
disclosures on the package front, while the new label requires 
information on the front and back package panels, and includes 
brightness, energy cost, life, light appearance, energy use, and 
mercury disclosures.
---------------------------------------------------------------------------

    Responses to NEMA's Request: The Natural Resources Defense Council 
(NRDC) opposes an extension for all covered products. It asserts that 
the new label is required ``as soon as possible'' to help consumers 
make decisions in an increasingly complex marketplace. NRDC also states 
that the new ``mandatory rules for calculating operating costs and 
savings claims'' will help combat misleading claims that may harm 
consumer confidence in these new products. However, as discussed 
further in subsection B, NRDC supports an extension of the effective 
date for CFLs.
    Earthjustice argues against any extension because, in its view, 
NEMA's Petition provides no new evidence justifying a delay and because 
the new label is needed to help consumers make informed decisions when 
purchasing bulbs. Also, Earthjustice notes that manufacturers can meet 
the current effective date for at least some products, as evidenced by 
NEMA's Petition, which states that manufacturers are ready to label LED 
and halogen products with no exceptions or delays.
    Commission Response: The Commission proposes to extend the 
effective date for all covered bulbs to January 1, 2012. The Commission 
set the present one year compliance period because it was consistent 
with the compliance period for its 1994 label changes and within the 
one to two year compliance period requested by NEMA. Indeed, as NEMA 
concedes, it failed to raise the implementation concerns highlighted in 
its Petition prior to issuance of the revised Rule. The Petition does, 
however, detail significant new concerns about the effective date. 
Specifically, the much larger number of packaging styles involved than 
in 1994, the difficulties posed by overseas manufacturing and 
packaging, and the extensive nature of the label changes required for 
each package weigh in favor of providing manufacturers with additional 
time to comply.
    In consideration of these issues, as well as Earthjustice's 
opposition to any extension and NRDC's opposition to an extension for 
non-CFLs, an extension of approximately six months to January 1, 2012, 
is appropriate. Importantly, this date coincides with the effective 
date for heightened Federal efficiency standards that will begin to 
phase out traditional incandescent bulbs in favor of more efficient 
alternatives. Thus, even with the extension, consumers will have the 
new label to help them with this transition. Moreover, NEMA's Petition 
states that bulb manufacturers are prepared to fully comply with the 
new labeling rules for all LED and new halogen bulbs without exceptions 
or delays. Therefore, the Commission expects that consumers will have 
the benefit of the new label on many such bulbs introduced to the 
market prior to the proposed effective date.

B. Effective Date for CFLs

    NEMA's Request: NEMA also seeks a further extension of the 
effective date for labeling CFLs to January 1, 2013. First, it explains 
that putting the new label on CFL packages presents unique challenges 
because these packages often have multiple shapes and unusual 
configurations, such as extended side panels and blister packs, and 
because their small size makes it particularly difficult to incorporate 
the new label. Second, NEMA asserts that the sheer

[[Page 81945]]

number of CFL packaging styles affected by the new label--as many as 
1,800 to 2,000 per manufacturer--creates an undue burden absent an 
extension. Third, NEMA argues that because no company has the internal 
resources necessary to change so many packages, manufacturers will have 
to outsource a substantial portion of the work, presumably at greater 
cost. Fourth, as discussed above, the long supply chain for CFLs poses 
logistical challenges for label changes. Finally, NEMA notes 
manufacturers plan to replace many current CFLs within 12 to 18 months 
with new models that contain less mercury and have enhanced features 
(e.g., dimming). Thus, some CFL models would bear the new label for 
only a short time period.
    Responses to NEMA's Request: NRDC supports NEMA's proposal to 
extend the effective date for CFLs to January 1, 2013. In its view, 
this extension will allow manufacturers to focus on labeling new energy 
saving bulbs, as well as their remaining incandescent bulbs. 
Earthjustice, however, opposes any extension. It argues that the large 
number of CFLs in the market underscores the need for the new label, 
particularly given the Commission's conclusion that the current label, 
with its focus on wattage, is not effective for communicating the 
brightness of high efficiency bulbs.
    Commission Response: The Commission does not propose further 
extending the effective date for CFLs to January 1, 2013. As NEMA 
explains, CFLs are the predominant high efficiency bulb on the market 
and will remain so for some time. The proposed delay would deprive 
consumers of the benefits of the new label for these bulbs, including 
preventing them from using the new label to readily compare CFLs to 
halogens and LEDs as those technologies become more available. 
Moreover, further delaying the new label for the most prevalent high 
efficiency bulbs on the market would hamper the Commission and the 
Department of Energy's (DOE's) efforts to educate consumers about the 
new label and high efficiency bulbs. In addition, the proposed 
extension of the effective date for all covered bulbs to January 1, 
2012, along with the exemption of certain incandescent bulbs as 
discussed below in Section C, should help alleviate the burdens 
associated with labeling CFLs. Finally, the proposal would not require 
the new label for CFLs that will be discontinued before January 1, 
2012, because manufacturers will cease production of those CFLs before 
the new label becomes effective.

C. Incandescent Bulbs Subject to New Federal Efficiency Standards

    NEMA's Request: NEMA also urges the Commission to exempt from the 
new label incandescent bulbs that will not meet heightened federal 
efficiency standards. Specifically, NEMA seeks to exempt 75-watt 
incandescent bulbs that will be eliminated by new EISA efficiency 
standards effective January 1, 2013, as well as 60 and 40-watt 
incandescent bulbs that will not meet EISA standards effective January 
1, 2014.\8\ In addition, NEMA seeks to exempt certain inefficient 
incandescent reflector products that DOE efficiency regulations will 
eliminate on July 14, 2012.\9\ According to NEMA, together, these 
incandescent bulbs comprise 25% of the bulbs covered by the new 
labeling rule.
---------------------------------------------------------------------------

    \8\ See 42 U.S.C. 6295(I).
    \9\ 74 FR 34080 (July 14, 2009).
---------------------------------------------------------------------------

    NEMA explains that manufacturers are no longer investing in these 
bulbs given their impending obsolescence.\10\ As a result, NEMA opposes 
requiring manufacturers to reinvest in them by creating new packaging 
when they will be manufactured for no more than 17 months (for 75-watt 
incandescents) and 29 months (for 60 and 40-watt incandescents), 
thereby wasting industry resources better directed to more efficient 
lighting technologies. In addition, NEMA asserts that EISA's labeling 
provisions focus on new, high efficiency products and were not intended 
to require label changes for soon-to-be-obsolete bulbs. NEMA further 
states that bulb manufacturers simply do not have the resources to 
change these product packages before the deadline given the many 
challenges they face to label CFL and other high efficiency bulbs. 
Finally, NEMA argues that any harm caused by not labeling these 
incandescent bulbs is minimal because their packages would continue to 
display the FTC's current label, which provides lumens, watts, and life 
disclosures. The current FTC label will enable consumers to compare 
products for the short period these bulbs remain on store shelves.
---------------------------------------------------------------------------

    \10\ NEMA notes that efficiency requirements in the European 
Union, Canada, and Mexico also have hastened disinvestment in these 
bulbs.
---------------------------------------------------------------------------

    Responses to NEMA's Request: NRDC disagrees. In its view, the new 
label--particularly its energy cost disclosure--is essential for 
incandescent bulbs to show consumers that they have much higher 
operating costs than more efficient alternatives. Because approximately 
50% of these incandescents will continue to be manufactured until 
January 1, 2014, NRDC argues labeling them will help consumers achieve 
substantial energy savings. However, as a compromise, NRDC recommends 
that the Commission only require manufacturers to include the front 
label (lumens and energy cost) on incandescent packages, exempting 
these bulbs from the Lighting Facts label. In NRDC's view, this 
approach would give consumers energy cost information, while only 
requiring manufacturers to make ``minor'' package modifications.
    Earthjustice also disagrees with NEMA's proposal, noting that the 
FTC has already concluded that the new label is important for 
incandescents because these bulbs will remain on the market more than a 
year after the current Rule's effective date and because they are 
particularly inefficient. Moreover, Earthjustice opposes NRDC's 
suggestion to require the front label only for these bulbs because it 
would deprive consumers of important information on the Lighting Facts 
label that will help them compare incandescents to higher efficiency 
bulbs.
    Commission Response: Based on this record, the Commission proposes 
to exempt both incandescent bulbs that do not meet the 2013 EISA 
efficiency standards (i.e., 75 watt bulbs) and reflector bulbs that do 
not meet DOE's July 14, 2012, standards from the new labeling 
requirements.\11\ The Commission would continue to require the existing 
label (lumens, watts, and life) for these products. However, the 
Commission does not propose to exempt products that do not meet the 
2014 standards (i.e., 60 and 40 watt bulbs) from the new label.
---------------------------------------------------------------------------

    \11\ 10 CFR 430.32(n)(5).
---------------------------------------------------------------------------

    When it revised the Rule, the Commission determined the new label 
was appropriate for traditional incandescent bulbs that would remain in 
production for more than a year after the Rule's effective date. The 
Commission included these bulbs because Congress had identified them as 
inefficient and the new labeling requirements would provide benefits to 
consumers that outweighed additional costs to industry. At the same 
time, the Commission exempted 100-watt incandescent bulbs because new 
efficiency standards will halt production of those bulbs by January 1, 
2012, less than six months after the effective date. The Commission 
reasoned that the benefits of labeling these bulbs for such a short 
period did not justify the costs to manufacturers. Having considered 
NEMA's newly raised concerns, the Commission now proposes to exempt 75 
watt

[[Page 81946]]

incandescent bulbs and incandescent reflector bulbs. The proposed 
January 1, 2012 effective date would shorten to a year the time 75 watt 
incandescents can be manufactured after the new labeling requirements 
become effective. This shorter period shifts the cost benefit analysis 
in favor of exempting these bulbs. Moreover, exempting 75 watt 
incandescent bulbs should free resources to label other bulbs, such as 
CFLs, in a timely manner.
    The case for requiring the new label on 60 and 40 watt bulbs is 
more compelling. These bulbs, which according to NRDC account for more 
than 50% of the incandescent market, will continue to be manufactured 
for two years after the proposed effective date. Because consumers will 
see 60 and 40 watt bulbs on store shelves for a much longer time and in 
greater numbers than 75 watt bulbs, an increased need exists for the 
new label to help consumers compare alternatives.\12\
---------------------------------------------------------------------------

    \12\ Although NEMA argues that Congress did not intend to change 
the labeling of traditional incandescent bulbs, nothing in EISA 
exempts these bulbs from the FTC's mandate to consider alternative 
labeling approaches to assist consumers.
---------------------------------------------------------------------------

    Finally, the Commission declines to propose that only the front 
label (lumens and energy cost) be required for incandescent bulbs as 
suggested by NRDC. First, the front label no longer provides wattage 
information. This information helps consumers ensure that they do not 
exceed the wattage limitation for their fixtures. Second, the front 
label does not provide consumers the utility rate and daily usage 
assumptions (i.e., 11 cents per kWh and three hours per day) underlying 
the energy cost disclosure, rendering the energy cost disclosure less 
useful. Third, it is unclear whether this approach actually decreases 
manufacturer's labeling costs because they still would have to change 
each incandescent package. Finally, as noted by Earthjustice, the 
Lighting Facts label contains other information such as light 
appearance that will help consumers compare incandescent bulbs to 
higher efficiency alternatives.

D. Formatting Requirements for Smaller Packages

    NEMA's Request: NEMA's Petition seeks certain changes and 
clarifications concerning the Rule's formatting requirements for small 
packages. In particular, NEMA suggests the Commission allow the linear 
(small, text-only) format on packages up to 48 square inches instead of 
the 24 square inches specified in the Rule.\13\ NEMA also asks the 
Commission to allow smaller label dimensions, smaller font sizes, and 
the placement of language on more than one line (e.g., presumably the 
placement of ``brightness'' and ``lumens'' on separate lines).\14\ 
Finally, NEMA seeks clarification on whether manufacturers should 
include the bulb area on blister packs, space devoted to warnings, and 
space occupied by graphics in calculating whether a package is less 
than 24 square inches.
---------------------------------------------------------------------------

    \13\ The amendments announced in the July 19, 2010 Notice allow 
manufacturers to use a smaller, linear, text-only Lightings Facts 
label, if: (1) The package's total surface area available for 
labeling is less than 24 square inches; and (2) the package shape or 
size cannot accommodate any of three standard formats (in English) 
on the rear or side panel. See 16 CFR 305.15(b)(5). This linear 
label criteria is similar to the FDA requirements for its Nutrition 
Facts programs. 75 FR at 41700.
    \14\ Earthjustice and NRDC's letters do not address NEMA's 
recommendations on this issue.
---------------------------------------------------------------------------

    Commission Response: The Commission does not propose to change the 
Rule's formatting requirements as requested by NEMA. Specifically, the 
standard label should fit on packages larger than 24 inches because the 
criteria used to set this threshold are consistent with those used by 
the Food and Drug Administration in its well-established food labeling 
program.\15\ A larger threshold would encourage use of the smaller, 
less helpful, linear label. Additionally, while the Rule does not 
dictate the label's dimensions, it does specify minimum font, leading, 
and line thicknesses.\16\ The Commission is not proposing any changes 
to the required font sizes because smaller sizes likely would decrease 
the label's effectiveness. Manufacturers should note that they may 
contact FTC staff for guidance if they have specific problems fitting 
the required label on particular packages. Finally, in calculating the 
surface area available for labeling on their packages, manufacturers 
should not include blister pack surfaces covering the bulb. However, 
they should include space used for any non-FTC mandated warnings, 
graphics, or other printed information.
---------------------------------------------------------------------------

    \15\ See 75 FR at 41700, n. 31.
    \16\ See Id., n. 29.
---------------------------------------------------------------------------

III. Request for Comment

    The Commission invites interested persons to submit written 
comments on any issue of fact, law, or policy that may bear upon the 
proposals under consideration. Please include explanations for any 
answers provided, as well as supporting evidence where appropriate. 
After examining the comments, the Commission will determine whether to 
issue specific amendments.
    Interested parties are invited to submit written comments 
electronically or in paper form. All comments should be filed as 
prescribed below, and must be received on or before January 28, 2011. 
Comments should state ``Lamp Labeling--Effective Date Extension, P-
114200'' in the text and, if applicable, on the envelope. The FTC will 
place your comment--including your name and your state--on the public 
record of this proceeding, and to the extent practicable, will make it 
available to the public on the FTC Web site at http://www.ftc.gov/os/publiccomments.shtm. As a matter of discretion, the Commission 
endeavors to remove individuals' home contact information from the 
comments before placing them on its Web site. Because comments will be 
made public, they should not include: (1) Any sensitive personal 
information, such as any individual's Social Security number, date of 
birth, driver's license number or other state identification number or 
foreign country equivalent, passport number, financial account number, 
or credit or debit card number; (2) any sensitive health information, 
such as medical records or other individually identifiable health 
information; or (3) any trade secret or any commercial or financial 
information which is privileged or confidential, as provided in Section 
6(f) of the FTC Act, 15 U.S.C. 46(f), and FTC Rule 4.10(a)(2), 16 CFR 
4.10(a)(2). Comments containing material for which confidential 
treatment is requested must be filed in paper form, must be clearly 
labeled ``Confidential,'' and must comply with FTC Rule 4.9(c), 16 CFR 
4.9(c).\17\
---------------------------------------------------------------------------

    \17\ The comment must be accompanied by an explicit request for 
confidential treatment, including the factual and legal basis for 
the request, and must identify the specific portions of the comment 
to be withheld from the public record. The FTC's General Counsel 
will grant or deny the request consistent with applicable law and 
the public interest. See FTC Rule 4.9(c), 16 CFR 4.9(c).
---------------------------------------------------------------------------

    Because postal mail addressed to the FTC is subject to delay due to 
heightened security screening, if possible, please submit your comments 
in electronic form or send them by courier or overnight service. To 
ensure that the Commission considers an electronic comment, you must 
file it at https://ftcpublic.commentworks.com/ftc/lightbulblabel by 
following the instructions on the web-based form. If this Notice 
appears at http://www.regulations.gov/search/Regs/home.html#home, you 
may also file a comment through that Web site. The Commission will 
consider all comments that regulations.gov forwards to it. You

[[Page 81947]]

may also visit the FTC Web site at http://www.ftc.gov to read the 
Notice and the news release describing it.
    A comment filed in paper form should include the reference ``Lamp 
Labeling--Effective Date Extension, P-114200'' in the text of the 
comment and, if applicable, on the envelope, and should be mailed or 
delivered to the following address: Federal Trade Commission, Office of 
the Secretary, Room H-113 (Annex N), 600 Pennsylvania Avenue, NW., 
Washington, DC 20580.
    The FTC Act and other laws the Commission administers permit the 
collection of public comments to consider and use in this proceeding as 
appropriate. The Commission will consider all timely and responsive 
comments it receives. More information, including routine uses 
permitted by the Privacy Act, may be found in the FTC's privacy policy 
at http://www.ftc.gov/ftc/privacy.shtm.
    Under the Freedom of Information Act (FOIA) or other laws, we may 
be required to disclose to outside organizations the information you 
provide. For additional information, including routine uses permitted 
by the Privacy Act, see the Commission's Privacy Policy at http://www.ftc.gov/ftc/privacy.shtm. The FTC Act and other laws the Commission 
administers permit the collection of this contact information to 
consider and use for the above purposes.
    Because written comments appear adequate to present the views of 
all interested parties, the Commission has not scheduled an oral 
hearing regarding these proposed amendments. Interested parties may 
request an opportunity to present views orally. If such a request is 
made, the Commission will publish a document in the Federal Register 
stating the time and place for such oral presentation(s) and describing 
the procedures that will be followed. Interested parties who wish to 
present oral views must submit a hearing request, on or before January 
18, 2011, in the form of a written comment that describes the issues on 
which the party wishes to speak. If there is no oral hearing, the 
Commission will base its decision on the written rulemaking record.

IV. Paperwork Reduction Act

    The current Rule contains recordkeeping, disclosure, testing, and 
reporting requirements that constitute ``information collection 
requirements'' as defined by 5 CFR 1320.7(c), the regulation that 
implements the Paperwork Reduction Act (PRA).\18\ OMB has approved the 
Rule's existing information collection requirements through May 31, 
2011 (OMB Control No. 3084-0069). The proposed amendments in this 
document will not increase and, in fact, will likely somewhat reduce 
previously estimated burden for the lamp labeling amendments.
---------------------------------------------------------------------------

    \18\ 44 U.S.C. 3501-3521.
---------------------------------------------------------------------------

V. Regulatory Flexibility Act

    The Regulatory Flexibility Act (RFA), 5 U.S.C. 601-612, requires 
that the Commission provide an Initial Regulatory Flexibility Analysis 
(IRFA) with a proposed rule and a Final Regulatory Flexibility Analysis 
(FRFA), if any, with the final rule, unless the Commission certifies 
that the rule will not have a significant economic impact on a 
substantial number of small entities. See 5 U.S.C. 603-605.
    The Commission does not anticipate that the proposed rule will have 
a significant economic impact on a substantial number of small 
entities. The Commission recognizes that some of the affected 
manufacturers may qualify as small businesses under the relevant 
thresholds. However, the Commission does not expect that the economic 
impact of the proposed amendments will be significant. In fact, the 
changes under consideration are likely to decrease the Rule's burden on 
affected entities.
    In its July 19, 2010 Notice (75 FR at 41711), the Commission 
estimated that the new labeling requirements will apply to about 50 
product manufacturers and an additional 150 online and paper catalog 
sellers of covered products. The Commission expects that approximately 
150 qualify as small businesses.
    Accordingly, this document serves as notice to the Small Business 
Administration of the FTC's certification of no effect. To ensure the 
accuracy of this certification, however, the Commission requests 
comment on whether the proposed rule will have a significant impact on 
a substantial number of small entities, including specific information 
on the number of entities that would be covered by the proposed rule, 
the number of these companies that are ``small entities,'' and the 
average annual burden for each entity. Although the Commission 
certifies under the RFA that the rule proposed in this notice would 
not, if promulgated, have a significant impact on a substantial number 
of small entities, the Commission has determined, nonetheless, that it 
is appropriate to publish an IRFA in order to inquire into the impact 
of the proposed rule on small entities. Therefore, the Commission has 
prepared the following analysis:

A. Description of the Reasons That Action by the Agency Is Being Taken

    Section 321(b) of the Energy Independence and Security Act of 2007 
(Pub. L. 110-140) requires the Commission to conduct a rulemaking to 
consider the effectiveness of the lamp labeling and to consider 
alternative labeling approaches. The Commission is considering an 
extension to the rule's effective date to provide industry members with 
additional compliance time.

B. Statement of the Objectives of, and Legal Basis for, the Proposed 
Rule

    The objective of the rule is to improve the effectiveness of the 
current lamp labeling program. EISA directs the Commission to consider 
whether alternative labeling approaches would help consumers better 
understand new high-efficiency lamp products and help them choose lamps 
that meet their needs. The particular changes currently under 
consideration would extend the rule's effective date to provide 
additional time for compliance.

C. Small Entities to Which the Proposed Rule Will Apply

    Under the Small Business Size Standards issued by the Small 
Business Administration, lamp manufacturers qualify as small businesses 
if they have fewer than 1,000 employees (for other household appliances 
the figure is 500 employees). Lamp catalog sellers qualify as small 
businesses if their sales are less than $8.0 million annually. The 
Commission estimates that there are approximately 150 entities subject 
to the proposed rule's requirements qualify as small businesses.\19\ 
The Commission seeks comment and information with regard to the 
estimated number or nature of small business entities for which the 
proposed rule would have a significant economic impact.
---------------------------------------------------------------------------

    \19\ See 75 FR at 41712.
---------------------------------------------------------------------------

D. Projected Reporting, Recordkeeping and Other Compliance Requirements

    The changes under consideration would not increase any reporting, 
recordkeeping, or other compliance requirements associated with the 
Commission's labeling rules (75 FR 41696). The proposed amendments will 
only extend the effective date for complying with the new light bulb 
labeling requirements previously issued at 75 FR 41696. The proposed 
rule

[[Page 81948]]

amendments would also exempt incandescent bulbs that fail to meet 
federal energy efficiency standards by 2013 (e.g., 75 watt bulbs) from 
those requirements. The Commission invites comment and information on 
these issues.

E. Duplicative, Overlapping, or Conflicting Federal Rules

    The Commission has not identified any other federal statutes, 
rules, or policies that would duplicate, overlap, or conflict with the 
proposed rule. The Commission invites comment and information on this 
issue.

F. Significant Alternatives to the Proposed Rule

    The Commission seeks comment and information on the need, if any, 
for alternative compliance methods that, consistent with the statutory 
requirements, would reduce the economic impact of the rule on small 
entities. For example, in proposing to extend the effective date for 
the new labeling requirements and to exempt certain bulbs from those 
requirements, the Commission is currently unaware of the need to adopt 
any special provision for small entities to be able to take advantage 
of the proposed extension or exemption, where applicable. The 
Commission, as previously explained, expects that the proposed 
amendments will postpone or reduce, rather than increase, the economic 
impact of the rule's requirements for all entities, including small 
entities. Nonetheless, if the comments filed in response to this notice 
identify small entities that are affected by the rule, as well as 
alternative methods of compliance that would reduce the economic impact 
of the rule on such entities, the Commission will consider the 
feasibility of such alternatives and determine whether they should be 
incorporated into the final rule.

VI. Communications by Outside Parties to the Commissioners or Their 
Advisors

    Written communications and summaries or transcripts of oral 
communications respecting the merits of this proceeding, from any 
outside party to any Commissioner or Commissioner's advisor, will be 
placed on the public record. See 16 CFR 1.26(b)(5).

VII. Final Rule

List of Subjects in 16 CFR Part 305

    Advertising, Energy conservation, Household appliances, Labeling, 
Reporting and recordkeeping requirements.

    For the reasons discussed above, the Commission proposes to change 
the effective date of FR Doc 2010-16895 published on July 19, 2010 (75 
FR 41696) to January 1, 2012 and to further amend part 305 of title 16, 
Code of Federal Regulations, as follows:

PART 305--RULE CONCERNING DISCLOSURES REGARDING ENERGY CONSUMPTION 
AND WATER USE OF CERTAIN HOME APPLIANCES AND OTHER PRODUCTS 
REQUIRED UNDER THE ENERGY POLICY AND CONSERVATION ACT (``APPLIANCE 
LABELING RULE'')

    1. The authority citation for part 305 continues to read as 
follows:

    Authority:  42 U.S.C. 6294.

    2. In Sec.  305.15, paragraph (c)(1) is revised to read as follows:


Sec.  305.15  Labeling for lighting products.

* * * * *
    (c)(1) Any covered incandescent lamp that is subject to and does 
not comply with the January 1, 2012 or January 1, 2013 efficiency 
standards specified in 42 U.S.C. 6295 or the DOE standards at 10 CFR 
430.32(n)(5) effective July 14, 2012 shall be labeled clearly and 
conspicuously on the principal display panel of product package with 
the following information in lieu of the labeling requirements 
specified in paragraph (b):
* * * * *

    By direction of the Commission.
Donald S. Clark,
Secretary.
[FR Doc. 2010-32577 Filed 12-28-10; 8:45 am]
BILLING CODE 6750-01-P