[Federal Register Volume 75, Number 210 (Monday, November 1, 2010)]
[Notices]
[Pages 67110-67113]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2010-27515]


-----------------------------------------------------------------------

INTERNATIONAL TRADE COMMISSION

[Investigation Nos. 731-TA-639 and 640 (Third Review)]


Forged Stainless Steel Flanges From India and Taiwan

AGENCY: United States International Trade Commission.

ACTION: Institution of five-year reviews concerning the antidumping 
duty orders on forged stainless steel flanges from India and Taiwan.

-----------------------------------------------------------------------

SUMMARY: The Commission hereby gives notice that it has instituted 
reviews pursuant to section 751(c) of the Tariff Act of 1930 (19 U.S.C. 
1675(c)) (the Act) to determine whether revocation of the antidumping 
duty orders on forged stainless steel flanges from India and Taiwan 
would be likely to lead to continuation or recurrence of material 
injury. Pursuant to section 751(c)(2) of the Act, interested parties 
are requested to respond to this notice by submitting the information 
specified below to the Commission; \1\ to be assured of

[[Page 67111]]

consideration, the deadline for responses is December 1, 2010. Comments 
on the adequacy of responses may be filed with the Commission by 
January 14, 2011. For further information concerning the conduct of 
these reviews and rules of general application, consult the 
Commission's Rules of Practice and Procedure, part 201, subparts A 
through E (19 CFR part 201), and part 207, subparts A, D, E, and F (19 
CFR part 207), as most recently amended at 74 FR 2847 (January 16, 
2009).
---------------------------------------------------------------------------

    \1\ No response to this request for information is required if a 
currently valid Office of Management and Budget (OMB) number is not 
displayed; the OMB number is 3117-0016/USITC No. 11-5-230, 
expiration date June 30, 2011. Public reporting burden for the 
request is estimated to average 15 hours per response. Please send 
comments regarding the accuracy of this burden estimate to the 
Office of Investigations, U.S. International Trade Commission, 500 E 
Street, SW., Washington, DC 20436.

---------------------------------------------------------------------------
DATES: Effective Date: November 1, 2010.

FOR FURTHER INFORMATION CONTACT: Mary Messer (202-205-3193), Office of 
Investigations, U.S. International Trade Commission, 500 E Street, SW., 
Washington, DC 20436. Hearing-impaired persons can obtain information 
on this matter by contacting the Commission's TDD terminal on 202-205-
1810. Persons with mobility impairments who will need special 
assistance in gaining access to the Commission should contact the 
Office of the Secretary at 202-205-2000. General information concerning 
the Commission may also be obtained by accessing its internet server 
(http://www.usitc.gov). The public record for these reviews may be 
viewed on the Commission's electronic docket (EDIS) at http://edis.usitc.gov.

SUPPLEMENTARY INFORMATION:
    Background. On February 9, 1994, the Department of Commerce 
(``Commerce'') issued antidumping duty orders on imports of forged 
stainless steel flanges from India and Taiwan (59 FR 5994). Following 
first five-year reviews by Commerce and the Commission, effective 
August 16, 2000, Commerce issued a continuation of the antidumping duty 
orders on imports of forged stainless steel flanges from India and 
Taiwan (65 FR 49964). Following second five-year reviews by Commerce 
and the Commission, effective December 29, 2005, Commerce issued a 
continuation of the antidumping duty orders on imports of forged 
stainless steel flanges from India and Taiwan (71 FR 3457, January 23, 
2006)). The Commission is now conducting third reviews to determine 
whether revocation of the orders would be likely to lead to 
continuation or recurrence of material injury to the domestic industry 
within a reasonably foreseeable time. It will assess the adequacy of 
interested party responses to this notice of institution to determine 
whether to conduct full reviews or expedited reviews. The Commission's 
determinations in any expedited reviews will be based on the facts 
available, which may include information provided in response to this 
notice.
    Definitions. The following definitions apply to these reviews:
    (1) Subject Merchandise is the class or kind of merchandise that is 
within the scope of the five-year reviews, as defined by Commerce.
    (2) The Subject Countries in these reviews are India and Taiwan.
    (3) The Domestic Like Product is the domestically produced product 
or products which are like, or in the absence of like, most similar in 
characteristics and uses with, the Subject Merchandise. In its original 
determinations, the Commission found one Domestic Like Product: 
Stainless steel flanges, both finished and unfinished. In its expedited 
first and second five-year review determinations, the Commission 
defined the Domestic Like Product as stainless steel flanges, co-
extensive with Commerce's scope.
    (4) The Domestic Industry is the U.S. producers as a whole of the 
Domestic Like Product, or those producers whose collective output of 
the Domestic Like Product constitutes a major proportion of the total 
domestic production of the product. In its original determinations and 
its expedited first and second five-year review determinations, the 
Commission defined the Domestic Industry to include all domestic 
producers of stainless steel flanges, consisting of both integrated 
producers (forger/finishers) and converters. During the original 
investigations, the Commission excluded one domestic producer, Flow 
Components, from the Domestic Industry under the related parties 
provision. In addition, two Commissioners defined the Domestic Industry 
differently in the original investigations.
    (5) An Importer is any person or firm engaged, either directly or 
through a parent company or subsidiary, in importing the Subject 
Merchandise into the United States from a foreign manufacturer or 
through its selling agent.
    Participation in the reviews and public service list.--Persons, 
including industrial users of the Subject Merchandise and, if the 
merchandise is sold at the retail level, representative consumer 
organizations, wishing to participate in the reviews as parties must 
file an entry of appearance with the Secretary to the Commission, as 
provided in section 201.11(b)(4) of the Commission's rules, no later 
than 21 days after publication of this notice in the Federal Register. 
The Secretary will maintain a public service list containing the names 
and addresses of all persons, or their representatives, who are parties 
to the reviews.
    Former Commission employees who are seeking to appear in Commission 
five-year reviews are advised that they may appear in a review even if 
they participated personally and substantially in the corresponding 
underlying original investigation. The Commission's designated agency 
ethics official has advised that a five-year review is not considered 
the ``same particular matter'' as the corresponding underlying original 
investigation for purposes of 18 U.S.C. 207, the post employment 
statute for Federal employees, and Commission rule 201.15(b)(19 CFR 
201.15(b)), 73 FR 24609 (May 5, 2008). This advice was developed in 
consultation with the Office of Government Ethics. Consequently, former 
employees are not required to seek Commission approval to appear in a 
review under Commission rule 19 CFR 201.15, even if the corresponding 
underlying original investigation was pending when they were Commission 
employees. For further ethics advice on this matter, contact Carol 
McCue Verratti, Deputy Agency Ethics Official, at 202-205-3088.
    Limited disclosure of business proprietary information (BPI) under 
an administrative protective order (APO) and APO service list.--
Pursuant to section 207.7(a) of the Commission's rules, the Secretary 
will make BPI submitted in these reviews available to authorized 
applicants under the APO issued in the reviews, provided that the 
application is made no later than 21 days after publication of this 
notice in the Federal Register. Authorized applicants must represent 
interested parties, as defined in 19 U.S.C. 1677(9), who are parties to 
the reviews. A separate service list will be maintained by the 
Secretary for those parties authorized to receive BPI under the APO.
    Certification. Pursuant to section 207.3 of the Commission's rules, 
any person submitting information to the Commission in connection with 
these reviews must certify that the information is accurate and 
complete to the best of the submitter's knowledge. In making the 
certification, the submitter will be deemed to consent, unless

[[Page 67112]]

otherwise specified, for the Commission, its employees, and contract 
personnel to use the information provided in any other reviews or 
investigations of the same or comparable products which the Commission 
conducts under Title VII of the Act, or in internal audits and 
investigations relating to the programs and operations of the 
Commission pursuant to 5 U.S.C. Appendix 3.
    Written submissions. Pursuant to section 207.61 of the Commission's 
rules, each interested party response to this notice must provide the 
information specified below. The deadline for filing such responses is 
December 1, 2010. Pursuant to section 207.62(b) of the Commission's 
rules, eligible parties (as specified in Commission rule 207.62(b)(1)) 
may also file comments concerning the adequacy of responses to the 
notice of institution and whether the Commission should conduct 
expedited or full reviews. The deadline for filing such comments is 
January 14, 2011. All written submissions must conform with the 
provisions of sections 201.8 and 207.3 of the Commission's rules and 
any submissions that contain BPI must also conform with the 
requirements of sections 201.6 and 207.7 of the Commission's rules. The 
Commission's rules do not authorize filing of submissions with the 
Secretary by facsimile or electronic means, except to the extent 
permitted by section 201.8 of the Commission's rules, as amended, 67 FR 
68036 (November 8, 2002). Also, in accordance with sections 201.16(c) 
and 207.3 of the Commission's rules, each document filed by a party to 
the reviews must be served on all other parties to the reviews (as 
identified by either the public or APO service list as appropriate), 
and a certificate of service must accompany the document (if you are 
not a party to the reviews you do not need to serve your response).
    Inability to provide requested information. Pursuant to section 
207.61(c) of the Commission's rules, any interested party that cannot 
furnish the information requested by this notice in the requested form 
and manner shall notify the Commission at the earliest possible time, 
provide a full explanation of why it cannot provide the requested 
information, and indicate alternative forms in which it can provide 
equivalent information. If an interested party does not provide this 
notification (or the Commission finds the explanation provided in the 
notification inadequate) and fails to provide a complete response to 
this notice, the Commission may take an adverse inference against the 
party pursuant to section 776(b) of the Act in making its 
determinations in the reviews.
    Information To Be Provided in Response to this Notice of 
Institution: If you are a domestic producer, union/worker group, or 
trade/business association; import/export Subject Merchandise from more 
than one Subject Country; or produce Subject Merchandise in more than 
one Subject Country, you may file a single response. If you do so, 
please ensure that your response to each question includes the 
information requested for each pertinent Subject Country. As used 
below, the term ``firm'' includes any related firms.
    (1) The name and address of your firm or entity (including World 
Wide Web address) and name, telephone number, fax number, and E-mail 
address of the certifying official.
    (2) A statement indicating whether your firm/entity is a U.S. 
producer of the Domestic Like Product, a U.S. union or worker group, a 
U.S. importer of the Subject Merchandise, a foreign producer or 
exporter of the Subject Merchandise, a U.S. or foreign trade or 
business association, or another interested party (including an 
explanation). If you are a union/worker group or trade/business 
association, identify the firms in which your workers are employed or 
which are members of your association.
    (3) A statement indicating whether your firm/entity is willing to 
participate in these reviews by providing information requested by the 
Commission.
    (4) A statement of the likely effects of the revocation of the 
antidumping duty orders on the Domestic Industry in general and/or your 
firm/entity specifically. In your response, please discuss the various 
factors specified in section 752(a) of the Act (19 U.S.C. 1675a(a)) 
including the likely volume of subject imports, likely price effects of 
subject imports, and likely impact of imports of Subject Merchandise on 
the Domestic Industry.
    (5) A list of all known and currently operating U.S. producers of 
the Domestic Like Product. Identify any known related parties and the 
nature of the relationship as defined in section 771(4)(B) of the Act 
(19 U.S.C. 1677(4)(B)).
    (6) A list of all known and currently operating U.S. importers of 
the Subject Merchandise and producers of the Subject Merchandise in 
each Subject Country that currently export or have exported Subject 
Merchandise to the United States or other countries after 2004.
    (7) A list of 3-5 leading purchasers in the U.S. market for the 
Domestic Like Product and the Subject Merchandise (including street 
address, World Wide Web address, and the name, telephone number, fax 
number, and E-mail address of a responsible official at each firm).
    (8) A list of known sources of information on national or regional 
prices for the Domestic Like Product or the Subject Merchandise in the 
U.S. or other markets.
    (9) If you are a U.S. producer of the Domestic Like Product, 
provide the following information on your firm's operations on that 
product during calendar year 2009, except as noted (report quantity 
data in pounds and value data in U.S. dollars, f.o.b. plant). If you 
are a union/worker group or trade/business association, provide the 
information, on an aggregate basis, for the firms in which your workers 
are employed/which are members of your association.
    (a) Production (quantity) and, if known, an estimate of the 
percentage of total U.S. production of the Domestic Like Product 
accounted for by your firm's(s') production;
    (b) Capacity (quantity) of your firm to produce the Domestic Like 
Product (i.e., the level of production that your establishment(s) could 
reasonably have expected to attain during the year, assuming normal 
operating conditions (using equipment and machinery in place and ready 
to operate), normal operating levels (hours per week/weeks per year), 
time for downtime, maintenance, repair, and cleanup, and a typical or 
representative product mix);
    (c) The quantity and value of U.S. commercial shipments of the 
Domestic Like Product produced in your U.S. plant(s); and
    (d) The quantity and value of U.S. internal consumption/company 
transfers of the Domestic Like Product produced in your U.S. plant(s); 
and
    (e) The value of (i) Net sales, (ii) cost of goods sold (COGS), 
(iii) gross profit, (iv) selling, general and administrative (SG&A) 
expenses, and (v) operating income of the Domestic Like Product 
produced in your U.S. plant(s) (include both U.S. and export commercial 
sales, internal consumption, and company transfers) for your most 
recently completed fiscal year (identify the date on which your fiscal 
year ends).
    (10) If you are a U.S. importer or a trade/business association of 
U.S. importers of the Subject Merchandise from the Subject 
Country(ies), provide the following information on your firm's(s') 
operations on that product during calendar year 2009 (report quantity 
data in pounds and value data in U.S. dollars). If you are a trade/
business association, provide the information, on an aggregate basis, 
for

[[Page 67113]]

the firms which are members of your association.
    (a) The quantity and value (landed, duty-paid but not including 
antidumping duties) of U.S. imports and, if known, an estimate of the 
percentage of total U.S. imports of Subject Merchandise from each 
Subject Country accounted for by your firm's(s') imports;
    (b) The quantity and value (f.o.b. U.S. port, including antidumping 
duties) of U.S. commercial shipments of Subject Merchandise imported 
from each Subject Country; and
    (c) The quantity and value (f.o.b. U.S. port, including antidumping 
duties) of U.S. internal consumption/company transfers of Subject 
Merchandise imported from each Subject Country.
    (11) If you are a producer, an exporter, or a trade/business 
association of producers or exporters of the Subject Merchandise in the 
Subject Country(ies), provide the following information on your 
firm's(s') operations on that product during calendar year 2009 (report 
quantity data in pounds and value data in U.S. dollars, landed and 
duty-paid at the U.S. port but not including antidumping duties). If 
you are a trade/business association, provide the information, on an 
aggregate basis, for the firms which are members of your association.
    (a) Production (quantity) and, if known, an estimate of the 
percentage of total production of Subject Merchandise in each Subject 
Country accounted for by your firm's(s') production; and
    (b) Capacity (quantity) of your firm to produce the Subject 
Merchandise in each Subject Country (i.e., the level of production that 
your establishment(s) could reasonably have expected to attain during 
the year, assuming normal operating conditions (using equipment and 
machinery in place and ready to operate), normal operating levels 
(hours per week/weeks per year), time for downtime, maintenance, 
repair, and cleanup, and a typical or representative product mix); and
    (c) The quantity and value of your firm's(s') exports to the United 
States of Subject Merchandise and, if known, an estimate of the 
percentage of total exports to the United States of Subject Merchandise 
from each Subject Country accounted for by your firm's(s') exports.
    (12) Identify significant changes, if any, in the supply and demand 
conditions or business cycle for the Domestic Like Product that have 
occurred in the United States or in the market for the Subject 
Merchandise in each Subject Country after 2004, and significant 
changes, if any, that are likely to occur within a reasonably 
foreseeable time. Supply conditions to consider include technology; 
production methods; development efforts; ability to increase production 
(including the shift of production facilities used for other products 
and the use, cost, or availability of major inputs into production); 
and factors related to the ability to shift supply among different 
national markets (including barriers to importation in foreign markets 
or changes in market demand abroad). Demand conditions to consider 
include end uses and applications; the existence and availability of 
substitute products; and the level of competition among the Domestic 
Like Product produced in the United States, Subject Merchandise 
produced in each Subject Country, and such merchandise from other 
countries.
    (13) (OPTIONAL) A statement of whether you agree with the above 
definitions of the Domestic Like Product and Domestic Industry; if you 
disagree with either or both of these definitions, please explain why 
and provide alternative definitions.

    Authority: These reviews are being conducted under authority of 
title VII of the Tariff Act of 1930; this notice is published 
pursuant to section 207.61 of the Commission's rules.

    Issued: October 27, 2010.

    By order of the Commission.
Marilyn R. Abbott,
Secretary to the Commission.
[FR Doc. 2010-27515 Filed 10-29-10; 8:45 am]
BILLING CODE 7020-02-P