[Federal Register Volume 75, Number 46 (Wednesday, March 10, 2010)]
[Notices]
[Pages 11414-11418]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2010-5131]


-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

[EPA-HQ-OPPT-2010-0171; FRL-8814-8]


Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

-----------------------------------------------------------------------

SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires 
any person who intends to manufacture (defined by statute to include 
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to 
notify EPA and comply with the statutory provisions pertaining to the 
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of 
TSCA, EPA is required to publish a notice of receipt of a 
premanufacture notice (PMN) or an application for a test marketing 
exemption (TME), and to publish periodic status reports on the 
chemicals under review and the receipt of notices of commencement to 
manufacture those chemicals. This status report, which covers the 
period from January 25, 2010 through February 12, 2010, consists of the 
PMNs pending or expired, and the notices of commencement tomanufacture 
a new chemical that the Agency has received under TSCA section 5 during 
this time period.

DATES: Comments identified by the specific PMN number or TME number, 
must be received on or before April 9, 2010.

[[Page 11415]]


ADDRESSES: Submit your comments, identified by docket identification 
(ID) number EPA-HQ-OPPT-2010-0171, by one of the following methods:
     Federal eRulemaking Portal: http://www.regulations.gov. 
Follow the on-line instructions for submitting comments.
     Mail: Document Control Office (7407M), Office of Pollution 
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 
Pennsylvania Ave., NW., Washington, DC 20460-0001.
     Hand Delivery: OPPT Document Control Office (DCO), EPA 
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. 
Attention: Docket ID Number EPA-HQ-OPPT-2010-0171. The DCO is open from 
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The 
telephone number for the DCO is (202) 564-8930. Such deliveries are 
only accepted during the DCO's normal hours of operation, and special 
arrangements should be made for deliveries of boxed information.
    Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2010-0171. EPA's policy is that all comments received will be included 
in the docket without change and may be made available on-line at 
http://www.regulations.gov, including any personal information 
provided, unless the comment includes information claimed to be 
Confidential Business Information (CBI) or other information whose 
disclosure is restricted by statute. Do not submit information that you 
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' system, 
which means EPA will not know your identity or contact information 
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov, 
your e-mail address will be automatically captured and included as part 
of the comment that is placed in the docket and made available on the 
Internet. If you submit an electronic comment, EPA recommends that you 
include your name and other contact information in the body of your 
comment and with any disk or CD-ROM you submit. If EPA cannot read your 
comment due to technical difficulties and cannot contact you for 
clarification, EPA may not be able to consider your comment. Electronic 
files should avoid the use of special characters, any form of 
encryption, and be free of any defects or viruses. For additional 
information about EPA's public docket, visit the EPA Docket Center 
homepage at http://www.epa.gov/epahome/dockets.htm.
    Docket: All documents in the docket are listed in the docket index 
available at http://www.regulations.gov. Although listed in the index, 
some information is not publicly available, e.g., CBI or other 
information whose disclosure is restricted by statute. Certain other 
material, such as copyrighted material, will be publicly available only 
in hard copy. Publicly available docket materials are available 
electronically at http://www.regulations.gov, or, if only available in 
hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA 
Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution 
Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of 
operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding 
Federal holidays. The telephone number of the EPA/DC Public Reading 
Room is (202) 566-1744, and the telephone number for the OPPT Docket is 
(202) 566-0280. Docket visitors are required to show photographic 
identification, pass through a metal detector, and sign the EPA visitor 
log. All visitor bags are processed through an X-ray machine and 
subject to search. Visitors will be provided an EPA/DC badge that must 
be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator, 
Environmental Assistance Division, Office of Pollution Prevention and 
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania 
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; 
e-mail address: [email protected].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

    This action is directed to the public in general. As such, the 
Agency has not attempted to describe the specific entities that this 
action may apply to. Although others may be affected, this action 
applies directly to the submitter of the premanufacture notices 
addressed in the action. If you have any questions regarding the 
applicability of this action to a particular entity, consult the person 
listed under FOR FURTHER INFORMATION CONTACT.

B. What Should I Consider as I Prepare My Comments for EPA?

     1. Submitting CBI. Do not submit this information to EPA through 
regulations.gov or e-mail. Clearly mark the part or all of the 
information that you claim to be CBI. For CBI information in a disk or 
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM 
that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and 
then identify electronically within the disk or CD-ROM the specific 
information that is claimed as CBI. In addition to one complete version 
of the comment that includes information claimed as CBI, a copy of the 
comment that does not contain the information claimed as CBI must be 
submitted for inclusion in the public docket. Information so marked 
will not be disclosed except in accordance with procedures set forth in 
40 CFR part 2.
     2. Tips for preparing your comments. When submitting comments, 
remember to:
     i. Identify the document by docket ID number and other identifying 
information (subject heading, Federal Register date and page number).
     ii. Follow directions. The Agency may ask you to respond to 
specific questions or organize comments by referencing a Code of 
Federal Regulations (CFR) part or section number.
     iii. Explain why you agree or disagree; suggest alternatives and 
substitute language for your requested changes.
     iv. Describe any assumptions and provide any technical information 
and/or data that you used.
     v. If you estimate potential costs or burdens, explain how you 
arrived at your estimate in sufficient detail to allow for it to be 
reproduced.
     vi. Provide specific examples to illustrate your concerns and 
suggest alternatives.
     vii. Explain your views as clearly as possible, avoiding the use 
of profanity or personal threats.
     viii. Make sure to submit your comments by the comment period 
deadline identified.

II. Why is EPA Taking this Action?

    Section 5 of TSCA requires any person who intends to manufacture 
(defined by statute to include import) a new chemical (i.e., a chemical 
not on the TSCA Inventory to notify EPA and comply with the statutory 
provisions pertaining to the manufacture of new chemicals. Under 
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a 
notice of receipt of a PMN or an application for a TME and to publish 
periodic status reports on the chemicals under review and the receipt 
of notices of commencement to manufacture those chemicals. This status 
report, which covers the period from January 25, 2010 through February 
12, 2010, consists of the PMNs pending or expired, and the notices of 
commencement to manufacture a new chemical that the

[[Page 11416]]

Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

    This status report identifies the PMNs, pending or expired, and the 
notices of commencement to manufacture a new chemical that the Agency 
has received under TSCA section 5 during this time period. If you are 
interested in information that is not included in the following tables, 
you may contact EPA as described in Unit I. to access additional non-
CBI information that may be available.
    In Table I of this unit, EPA provides the following information (to 
the extent that such information is not claimed as CBI) on the PMNs 
received by EPA during this period: the EPA case number assigned to the 
PMN; the date the PMN was received by EPA; the projected end date for 
EPA's review of the PMN; the submitting manufacturer; the potential 
uses identified by the manufacturer in the PMN; and the chemical 
identity.

                                             I. 34 Premanufacture Notices Received From: 1/25/10 to 2/12/10
--------------------------------------------------------------------------------------------------------------------------------------------------------
                                                              Projected Notice End
              Case No.                    Received Date               Date           Manufacturer/Importer           Use                  Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-10-0189                            01/25/10                04/24/10                CBI                    (G) Lubricant          (G) Molybdenum
                                                                                                             additive               alkoxyalkyl-
                                                                                                                                    alkyldithiocarbamate
P-10-0190                            01/25/10                04/24/10                CBI                    (S) Tackifier in the   (G) Rosin, polymer
                                                                                                             rubber / tires         with phenols and
                                                                                                             industry               formaldehyde
P-10-0191                            01/25/10                04/24/10                CBI                    (S) Tackifier in the   (G) Rosin, polymer
                                                                                                             rubber / tires         with phenols and
                                                                                                             industry               formaldehyde
P-10-0192                            01/25/10                04/24/10                CBI                    (S) Tackifier in the   (G) Rosin, polymer
                                                                                                             rubber / tires         with phenols and
                                                                                                             industry               formaldehyde
P-10-0193                            01/25/10                04/24/10                CBI                    (S) Tackifier in the   (G) Rosin, polymer
                                                                                                             rubber / tires         with phenols and
                                                                                                             industry               formaldehyde
P-10-0194                            01/25/10                04/24/10                CBI                    (S) Tackifier in the   (G) Rosin, polymer
                                                                                                             rubber / tires         with phenols and
                                                                                                             industry               formaldehyde
P-10-0195                            01/25/10                04/24/10                CBI                    (S) Tackifier in the   (G) Rosin, polymer
                                                                                                             rubber / tires         with phenols and
                                                                                                             industry               formaldehyde
P-10-0196                            01/25/10                04/24/10                Kemira Chemicals,      (S) Scale inhibition   (G) Polycarboxylic
                                                                                      Inc.                   for crude oil and      acid derivative
                                                                                                             gas production
P-10-0197                            01/28/10                04/27/10                CBI                    (G) Adhesives          (G) MDI modified
                                                                                                                                    polyester resin
P-10-0198                            01/26/10                04/25/10                CBI                    (G) Component of foam  (G) Fatty acid
                                                                                                                                    polymer with
                                                                                                                                    aliphatic diol and
                                                                                                                                    aromatic diacid
P-10-0199                            01/26/10                04/25/10                Cognis corporation     (S) Leather cleaner    (S) Isononanoic acid,
                                                                                                             formulation            C16	18 alkyl esters
P-10-0200                            01/26/10                04/25/10                CBI                    (G) Oilfield polymer   (G) Hydroxypropyl
                                                                                                                                    methacrylate,
                                                                                                                                    reaction products
                                                                                                                                    with propylene oxide
                                                                                                                                    and ethylene oxide,
                                                                                                                                    copolymer with N-
                                                                                                                                    vinyl caprolactam
P-10-0201                            01/27/10                04/26/10                CBI                    (S) Polymer for floor  (G) Polyether
                                                                                                             coatings               polyurethane
P-10-0202                            01/27/10                04/26/10                CBI                    (S) Light stabilizer   (G) Substituted
                                                                                                             for plastic articles   piperidinol,
                                                                                                                                    alkanoate
P-10-0203                            01/29/10                04/28/10                CBI                    (G) Polyurethane       (G) Aqueous,
                                                                                                             dispersion for         aliphatic
                                                                                                             coatings               polyurethane
                                                                                                                                    dispersion
P-10-0204                            01/29/10                04/28/10                CBI                    (S) Resin for          (G) Acrylate capped
                                                                                                             ultraviolet or         polyurethane
                                                                                                             electron beam          oligomer
                                                                                                             radiation curable
                                                                                                             coatings for wood
P-10-0205                            01/29/10                04/28/10                CBI                    (S) (1) Compound for   (G) Poly(aryl ether)
                                                                                                             use in producing       polymers
                                                                                                             films that will be
                                                                                                             applied to plastic
                                                                                                             substrates (open /
                                                                                                             non-dipersive use);
                                                                                                             (2) Compound for use
                                                                                                             in producing
                                                                                                             reinforced plastic
                                                                                                             parts (open / non-
                                                                                                             dispersive use)
P-10-0206                            01/29/10                04/28/10                CBI                    (S) (1) Compound for   (G) Poly(aryl ether)
                                                                                                             use in producing       polymers
                                                                                                             films that will be
                                                                                                             applied to plastic
                                                                                                             substrates (open /
                                                                                                             non-dipersive use);
                                                                                                             (2) Compound for use
                                                                                                             in producing
                                                                                                             reinforced plastic
                                                                                                             parts (open / non-
                                                                                                             dispersive use)
P-10-0207                            01/29/10                04/28/10                CBI                    (S) (1) Compound for   (G) Poly(aryl ether)
                                                                                                             use in producing       polymers
                                                                                                             films that will be
                                                                                                             applied to plastic
                                                                                                             substrates (open /
                                                                                                             non-dipersive use);
                                                                                                             (2) Compound for use
                                                                                                             in producing
                                                                                                             reinforced plastic
                                                                                                             parts (open / non-
                                                                                                             dispersive use)
P-10-0208                            01/29/10                04/28/10                CBI                    (G) Formulated         (G) Coal gasification
                                                                                                             agricultural product   products
                                                                                                             for export
P-10-0209                            02/02/10                05/02/10                CBI                    (S) Reactive hotmelt   (G) Polyurethane
                                                                                                             adhesive               resin
P-10-0210                            02/02/10                05/02/10                CBI                    (S) Reactive hotmelt   (G) Polyurethane
                                                                                                             adhesive               resin
P-10-0211                            02/02/10                05/02/10                CBI                    (S) Reactive hotmelt   (G) Polyurethane
                                                                                                             adhesive               resin
P-10-0212                            02/02/10                05/02/10                CBI                    (S) Reactive hotmelt   (G) Polyurethane
                                                                                                             adhesive               resin
P-10-0213                            02/02/10                05/02/10                CBI                    (S) Reactive hotmelt   (G) Polyurethane
                                                                                                             adhesive               resin

[[Page 11417]]

 
P-10-0214                            02/03/10                05/03/10                Best Sanitizers, Inc.  (S) Surfactant         (S) Palm oil, mixed D-
                                                                                                                                    glucose and oleic
                                                                                                                                    acid, candida
                                                                                                                                    bombicola-fermented
P-10-0215                            02/03/10                05/03/10                CBI                    (G) 1. Sealant for     (G) Silane modified
                                                                                                             construction           polymer
                                                                                                             industry; 2.
                                                                                                             Adhesive for graphic
                                                                                                             art application
P-10-0216                            02/04/10                05/04/10                Coim usa inc.          (S) Packaging          (S) 1,3-
                                                                                                             adhesives              benzenedicarboxylic
                                                                                                                                    acid, polymer with
                                                                                                                                    hexanedioic acid,
                                                                                                                                    .alpha.-hydro-
                                                                                                                                    .omega.-
                                                                                                                                    hydroxypoly[oxy(meth
                                                                                                                                    yl-1,2-ethanediyl)],
                                                                                                                                    1,3-
                                                                                                                                    isobenzofurandione
                                                                                                                                    and 2,2'-
                                                                                                                                    oxybis[ethanol]
P-10-0217                            02/04/10                05/04/10                Loba-Wakol LLC         (S) Wood floor         (G) Fatty acid
                                                                                                             treatment, finisher    trimetllitate alkyld
                                                                                                                                    polymer
P-10-0218                            02/04/10                05/04/10                Loba-Wakol LLC         (S) Wood floor         (G) Aliphatic
                                                                                                             treatment, finisher    diisocyanate,
                                                                                                                                    polycarbonate,
                                                                                                                                    polyesterpolyol
                                                                                                                                    polymer
P-10-0219                            02/04/10                05/04/10                Loba-Wakol LLC         (S) Wood floor         (G) Aliphatic
                                                                                                             treatment, finisher    diisocyanate,
                                                                                                                                    polyesterpolyol,
                                                                                                                                    bishydroxymethylalka
                                                                                                                                    noic acid polymer
P-10-0220                            02/04/10                05/04/10                Solvay Fluorides, LLC  (G) Raw material       (S) 3-buten-2-one, 4-
                                                                                      - A subsidiary of                             ethoxy-1,1,1-
                                                                                      Solvay Chemicals,                             trifluoro-, (3E)-
                                                                                      Inc.
P-10-0221                            02/05/10                05/05/10                Coim USA Inc.          (S) Packaging          (S) 1,3-
                                                                                                             adhesives              benzenedicarboxylic
                                                                                                                                    acid, polymer with
                                                                                                                                    hexanedioic acid,
                                                                                                                                    .alpha.-hydro-
                                                                                                                                    .omega.-
                                                                                                                                    hydroxypoly[oxy(meth
                                                                                                                                    yl-1,2-ethanediyl)],
                                                                                                                                    1,3-
                                                                                                                                    isobenzofurandione
                                                                                                                                    and 2,2'-
                                                                                                                                    oxybis[ethanol], N-
                                                                                                                                    [[(isocyanatophenyl)
                                                                                                                                    methyl]phenyl]carbam
                                                                                                                                    ate
P-10-0222                            02/05/10                05/05/10                CBI                    (G) Alkylating agent   (G) Alkyltin halide
--------------------------------------------------------------------------------------------------------------------------------------------------------

    In Table II of this unit, EPA provides the following information 
(to the extent that such information is not claimed as CBI) on the 
Notices of Commencement to manufacture received:

                             II. 16 Notices of Commencement From: 1/25/10 to 2/12/10
----------------------------------------------------------------------------------------------------------------
                                                                Commencement Notice
              Case No.                     Received Date             End Date                  Chemical
----------------------------------------------------------------------------------------------------------------
P-02-0988                             01/26/10                01/13/10                (G) Urethane modified
                                                                                       acyrlate
P-08-0556                             02/02/10                01/19/10                (G) Aromatic prepolymer
                                                                                       based on tdi
P-08-0611                             02/01/10                01/13/10                (G) Isocyanate polymer
P-09-0004                             02/01/10                01/14/10                (G) Isocyanate polymer
P-09-0037                             01/27/10                01/20/10                (G) Fluoroalkyl
                                                                                       methacrylate copolymer
P-09-0071                             01/22/10                01/13/10                (G) N,N-dialkylamine
P-09-0239                             02/01/10                01/15/10                (G) Siloxanes and
                                                                                       silicones, di-me,
                                                                                       polymers with
                                                                                       (chloromethylsilyl)-
                                                                                       functional alkane, vinyl-
                                                                                       group terminated
P-09-0241                             01/28/10                01/25/10                (S) 1,2-ethanediol,
                                                                                       reaction products with
                                                                                       epichlorohydrin
P-09-0281                             01/22/10                01/15/10                (G) Styrene-maleic
                                                                                       anhydride copolymer,
                                                                                       reaction product with
                                                                                       amino compounds
P-09-0285                             01/25/10                09/23/09                (G) Unsaturated polyester
                                                                                       resin
P-09-0350                             02/03/10                01/22/10                (S) Oils, Evodia
                                                                                       Rutaecarpa
P-09-0440                             01/27/10                11/06/09                (G) Unsaturated polyester
                                                                                       resin
P-09-0489                             02/03/10                01/22/10                (S) Definition:
                                                                                       Extractives and their
                                                                                       physically modified
                                                                                       derivatives. Periploca
                                                                                       Sepium
P-09-0489                             02/03/10                01/22/10                (S) Oils, Periploca Sepium
P-09-0630                             01/25/10                01/19/10                (G) Silane derivative
P-10-0006                             01/28/10                01/20/10                (G) Aliphatic alcohol,
                                                                                       polymer with 1,3-
                                                                                       diisocyanatomethylbenzene
                                                                                       and .alpha.-hydro-.omega.-
                                                                                       hydroxypoly (oxy-1,4-
                                                                                       butanediyl), 2-
                                                                                       hydroxypropyl
                                                                                       methacrylate-blocked

[[Page 11418]]

 
P-10-0009                             02/01/10                01/26/10                (G) Diglycidylaniline
----------------------------------------------------------------------------------------------------------------


List of Subjects

    Environmental protection, Chemicals, Premanufacturer notices.

    Dated: March 1, 2010.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution 
Prevention and Toxics.

[FR Doc. 2010-5131 Filed 3-9-10; 8:45 am]
BILLING CODE 6560-50-S