[Federal Register Volume 75, Number 46 (Wednesday, March 10, 2010)]
[Notices]
[Pages 11404-11414]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2010-5129]
[[Page 11403]]
-----------------------------------------------------------------------
Part V
Environmental Protection Agency
-----------------------------------------------------------------------
Certain New Chemicals; Receipt and Status Information; Notices
Federal Register / Vol. 75, No. 46 / Wednesday, March 10, 2010 /
Notices
[[Page 11404]]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2010-0112; FRL-8814-1]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from October 26, 2009 through January 22, 2010, consists of the
PMNs and TME, both pending or expired, and the notices of commencement
to manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before April 9, 2010.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2010-0112, by one of the following methods:
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID Number EPA-HQ-OPPT-2010-0112. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the DCO's normal hours of operation, and special
arrangements should be made for deliveries of boxed information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2010-0112. EPA's policy is that all comments received will be included
in the docket without change and may be made available on-line at
http://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' system,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov,
your e-mail address will be automatically captured and included as part
of the comment that is placed in the docket and made available on the
Internet. If you submit an electronic comment, EPA recommends that you
include your name and other contact information in the body of your
comment and with any disk or CD-ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses. For additional
information about EPA's public docket, visit the EPA Docket Center
homepage at http://www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket are listed in the docket index
available at http://www.regulations.gov. Although listed in the index,
some information is not publicly available, e.g., CBI or other
information whose disclosure is restricted by statute. Certain other
material, such as copyrighted material, will be publicly available only
in hard copy. Publicly available docket materials are available
electronically at http://www.regulations.gov, or, if only available in
hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA
Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution
Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of
operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding
Federal holidays. The telephone number of the EPA/DC Public Reading
Room is (202) 566-1744, and the telephone number for the OPPT Docket is
(202) 566-0280. Docket visitors are required to show photographic
identification, pass through a metal detector, and sign the EPA visitor
log. All visitor bags are processed through an X-ray machine and
subject to search. Visitors will be provided an EPA/DC badge that must
be visible at all times in the building and returned upon departure.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: [email protected].
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM
that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and
then identify electronically within the disk or CD-ROM the specific
information that is claimed as CBI. In addition to one complete version
of the comment that includes information claimed as CBI, a copy of the
comment that does not contain the information claimed as CBI must be
submitted for inclusion in the public docket. Information so marked
will not be disclosed except in accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
[[Page 11405]]
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at your estimate in sufficient detail to allow for it to be
reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use
of profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from October 26, 2009 through January
22, 2010, consists of the PMNs and TME, both pending or expired, and
the notices of commencement to manufacture a new chemical that the
Agency has received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs and TME, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you are interested in information that is not included in
the following tables, you may contact EPA as described in Unit I. to
access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 161 Premanufacture Notices Received From: 10/26/09 to 1/22/10
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-10-0022 10/26/09 01/23/10 H.B. Fuller (G) Industrial (G) Isocyanate-
adhesive functional
polyurethane
prepolymer
P-10-0023 10/26/09 01/23/10 CBI (S) Pigment (G) Benzenesulfonic
derivative used in acid, 4-amino, azo
ink contained in ink pigment
jet printer
cartridges
P-10-0024 10/26/09 01/23/10 CBI (G) Precursor to (G) Substituted
another chemical benzoyl chloride
substance,
destructive use
P-10-0025 10/26/09 01/23/10 CBI (G) Precursor to (G) Substituted
another chemical pyrazolone
substance,
destructive use
P-10-0026 10/26/09 01/23/10 CBI (G) Precursor to (G) Salt of
another chemical condensation product
substance, of substituted
destructive use pyrazolone
P-10-0027 10/26/09 01/23/10 CBI (G) Precursor to (G) Substituted
another chemical benzoic acid
substance,
destructive use
P-10-0028 10/26/09 01/23/10 CBI (G) Precursor to (G) Substituted
another chemical benzoic acid
substance,
destructive use
P-10-0029 10/28/09 01/25/10 CBI (S) Acrylic polymer (G) Acrylic polymer
used in the
manufacture of
adhesive tapes
P-10-0030 10/28/09 01/25/10 PPG Industries, Inc. (G) Component of a (G) Aromatic
coating polyurethane
P-10-0031 10/28/09 01/25/10 Reichhold, Inc. (G) Flexibilizing (G) Alkanediol,
resin, non- polymer with
dispersive alkyleneamine,
isocyanate and
glycol
P-10-0032 10/27/09 01/24/10 CBI (G) Dewaxing aid (G) Alkylester,
polymer with alkyl
acrylate
P-10-0033 10/27/09 01/24/10 CBI (G) Gear oil additive (G) Aromatic
hydrogenated poly
alkyldiene
containing poly
alkyl methacrylate
P-10-0034 10/27/09 01/24/10 Firmenich Inc. (S) Aroma for use in (S) 1(2H)-
fragrance mixtures, naphthalenone,
which in turn are octahydro-2,3,81-
used in perfumes, trimethyl-, (3R,
soaps, cleansers, 4AR, 8AR)-rel-
etc.
P-10-0035 10/29/09 01/26/10 CBI (G) Conditioning (G) Sodium
agent carboxylate
P-10-0036 10/30/09 01/27/10 CBI (S) Polyester (G) Substituted
filament and staple polyethylene
terephtalate
P-10-0037 10/30/09 01/27/10 CBI (S) Flame retardant (G) Substituted
in polyester propionic acid
filament and staple
P-10-0038 11/02/09 01/30/10 CBI (S) Flame retardant (G) Heterocyclic salt
for use in adhesives
and coatings
P-10-0039 11/03/09 01/31/10 Nanocomp (G) For all (S) Carbon
Technologies, Inc. applications listed
here the field is
composite structures
for aerospace
P-10-0040 11/03/09 01/31/10 Nanocomp (G) For all (S) Carbon
Technologies, Inc. applications listed
here the field is
aerospace
P-10-0041 11/03/09 01/31/10 Huntsman Corporation (G) Dispersing agent (G) Polyether
polyacid comb
polymer
[[Page 11406]]
P-10-0042 11/03/09 01/31/10 CBI (S) Laminating (G) Polyester
adhesive polyurethane
P-10-0043 11/03/09 01/31/10 CBI (S) Coatings (G) Silicone modified
application alkyd resin
P-10-0044 11/04/09 02/01/10 Green Era Solutions (S) Fragrance (S) Extractives and
ingredient their physically
modified
derivatives.
Callitropsis
nootkatensis. Oil,
callitropsis
nootkatensis
P-10-0045 11/04/09 02/01/10 CBI (G) Adhesives (G) Solvent free
adhesives
P-10-0046 11/04/09 02/01/10 Coim USA Inc. (S) Foam insulation (S) 1,4-
benzenedicarboxylic
acid, polymer with
2,2-
bis(hydroxymethyl)-
1,3-propanediol,
hexanedioic acid,
.alpha.-hydro-
.omega.-
hydroxypoly(oxy-1,2-
ethanediyl), 1,3-
isobenzofurandione
and 2,2'-
oxybis[ethanol],
benzoate
P-10-0047 11/05/09 02/02/10 CBI (S) Curing agent for (G) Alkenoic acid, 2-
epoxy resin in methyl-, 2-
protective coatings oxiranylmethyl
ester, reaction
products with 4,4'-
methylenebis
(cyclohexanamine)
P-10-0048 11/05/09 02/02/10 CBI (G) Pigment (G) Sulfonated SMA
dispersant; drilling
fluid dispersant
P-10-0049 11/06/09 02/03/10 CBI (S) Resin for (G) Polyester
coatings for metal polyurethane
P-10-0050 11/09/09 02/06/10 CBI (G) Component in (G) Amine salts of
corrosion inhibitor fatty acids
formulation for oil
field use
P-10-0051 11/09/09 02/06/10 Cognis Corporation (S) Performance (S) Starch, 2-
additive for hard carboxyethyl 2-
surface cleaners methyl-3-oxo-3-[[3-
(trimethylammonio)pr
opyl]amino]propyl
ether, chloride
P-10-0052 11/09/09 02/06/10 CBI (G) Fuel additive (G) Aryl polyolefin
intermediate
P-10-0053 11/10/09 02/07/10 CBI (S) Reactant for the (G) Halogenated
manufacture of a aromatic amine
pesticide
P-10-0054 11/10/09 02/07/10 DIC International (G) Additive for (G) Fluorinated
(USA) LLC lubricating oil acrylic acid ester
copolymer (telomer
type)
P-10-0055 11/09/09 02/06/10 CBI (S) Ingredient in (S) Butanoic acid, 3-
fragrance compound hydroxy-, 5-methyl-2-
(1-
methylethyl)cyclohex
yl ester
P-10-0056 11/09/09 02/06/10 CBI (S) Ingredient in (S) Butanoic acid, 3-
fragrance compound mercapo-2-methyl-,
ethyl ester
P-10-0057 11/09/09 02/06/10 CBI (G) Fuel additive (G) Polyolefin aryl
amine
P-10-0058 11/12/09 02/09/10 CBI (G) Intermediate (G) Partially
fluorinated alcohol
substituted glycol
P-10-0059 11/12/09 02/09/10 CBI (G) Intermediate (G) Partially
fluorinated alcohol
substituted glycol
P-10-0060 11/12/09 02/09/10 CBI (G) Surface active (G) Partially
agent fluorinated alcohol
substituted glycol
P-10-0061 11/13/09 02/10/10 CBI (G) Chemical (G) Alkyl thiol,
intermediate - manufacture of, by-
destructive use products from,
distant lights
P-10-0062 11/13/09 02/10/10 CBI (G) Chemical (G) Alkyl thiol,
intermediate - manufacture of, by-
destructive use products from,
distant residues
P-10-0063 11/12/09 02/09/10 Mitsui Chemicals (S) Binder for toner (G) Aromatic
America, Inc. discarboxylic acid,
polymer with 1,3-
diisocyanatomethylbe
nzene, .alpha.,
.alpha'.-[(1-
methylethylidene)di-
4,1-
phenylene]bis[.omega
.-
hydroxypoly[oxy(meth
yl-1-2,
ethanediyl)]] and
2,2'-
oxybis[etehanol]
P-10-0064 11/16/09 02/13/10 CBI (G) Curing aid (G) Amidosilane
P-10-0065 11/16/09 02/13/10 CBI (G) Additive, open, (G) Polyether
non-dispersive use modified polyurea
P-10-0066 11/16/09 02/13/10 CBI (G) Ethoxylation (G) Partially
initiator fluorinated ortho-
ester
P-10-0067 11/16/09 02/13/10 CBI (G) Used in the (G) Organotin
manufacture of compound
polyurethane foam
P-10-0068 11/17/09 02/14/10 CBI (S) Additive for (G) Sulfur silane
rubber articles
[[Page 11407]]
P-10-0069 11/17/09 02/14/10 CBI (G) Used in adhesive (G) alkyl acrylate,
products polymer with
aliphatic acid vinyl
ester, vinyl
monomer, acrylate
and hydroxyalkyl
acrylate
P-10-0070 11/17/09 02/14/10 CBI (G) Used in adhesive (G) acrylate, polymer
products with aliphatic acid
vinyl ester, vinyl
monomer and
hydroxyalkyl
acrylate
P-10-0071 11/17/09 02/14/10 CBI (G) Used in adhesive (G) alkyl acrylate,
products polymer with
aliphatic acid vinyl
ester, acrylate
hydroxyalkyl
acrylate,
alkanenitrile and
acrylate
P-10-0072 11/13/09 02/10/10 The Dow Chemical (S) Monomer inhibitor (G) Substituted
Company oxidized piperidinyl
derivative
P-10-0073 11/17/09 02/14/10 CBI (G) Hardener for (G) Blocked
industrial coatings polyisocyanate
P-10-0074 11/17/09 02/14/10 Alberdingk Boley, (S) For special metal (G) Butanoic acid, 3-
Inc. coatings oxo-, 2-[(2-methyl-1-
oxo-2-propen -1-
yl)oxy]ethyl ester,
polymer with butyl 2-
methyl-2-propenoate,
ethenylbenzene, 2-
ethylhexyl 2-
propenoate, methyl 2-
methyl-2-propenoate,
phosphoric acid, di-
ester with hydroxy
ethyl methacrylate
and 2-(phosphonooxy)
ethyl 2-methyl-2-
propenoate
P-10-0075 11/18/09 02/15/10 CBI (G) Resin for use in (G) Brominated
manufacture of aromatic polyether
reinforced composite polyester
products
P-10-0076 11/18/09 02/15/10 CBI (S) Raw material used (S) Benzene, 4-bromo-
for production of 1,2-dimethyl-
1,1-biphenyl,
3,3',4,4'-
tetramethyl
P-10-0077 11/18/09 02/15/10 CBI (G) Automotive (G) Linear hydroxy
coatings funtional polyester
P-10-0078 11/18/09 02/15/10 Dow Chemical Company (G) Adhesive (G) Capped
component polyurethane adduct
P-10-0079 11/18/09 02/15/10 CBI (G) Colorant (G) Substituted
naphthalene mixed
salt
P-10-0080 11/19/09 02/16/10 CBI (G) Adhesive (G) Mdi modified
polyester resin
P-10-0081 11/18/09 02/15/10 CBI (S) Curing agent for (G) Phenol, polymer
epoxy resin in with formaldehyde,
protective coatings glycidyl ether,
reaction products
with 5-amino-1,3,3-
trialkylcycloalkanem
ethanamine
P-10-0082 11/18/09 02/15/10 CBI (G) Multi-purpose (S) 1,2,3-
additive propanetriol,
homopolymer,
hexadecanoate
octadecanoate
P-10-0083 11/05/09 02/02/10 CBI (G) Resin component (G) Hydroxy-aryl,
polymer with
substituted benzene,
cyanate
P-10-0084 11/20/09 02/17/10 CBI (G) Dispersion (G) Carbazole violet
additive for sulfonamide derivate
printing ink
P-10-0085 11/23/09 02/20/10 CBI (G) Non-dispersive (G) Bismuth salt of
use lactic acid
P-10-0086 11/23/09 02/20/10 CBI (G) Laminate resin (G) Epoxidized
viscosity modifier benzoxazine
P-10-0087 11/23/09 02/20/10 CBI (G) Destructive use (G) Octylated phenyl-
alpha-naphthylamine
P-10-0088 11/24/09 02/21/10 Frx Polymers, Inc. (G) Frx co-polymers (G) Polyphosphonate-
are non-halogenated co-polycarbonate
polyphosphonate-co-
polycarbonate flame
retardant polymers
that address the
need to replace the
current commercial
bromine-containing
flame retardants
that are being
phased out due to
environmental
regulation. Flame
retardants are
required to meet
fire safety
standards in order
to reduce
flammability of
combustible
materials. Use
sectors are:
consumer electronics
as well as building
and construction
lighting.
P-10-0089 11/25/09 02/22/10 CBI (G) Solvent / curing (G) Dialkyl
agent imidazolium salt
[[Page 11408]]
P-10-0090 11/24/09 02/21/10 CBI (G) Polymer additive (S) Fatty acids, C18-
laundry care unsaturated, dimers,
products hydrogenated,
polymers with 1,6-
diisocyanatohexane,
polypropylene glycol
diamine and
polypropylene glycol
mono(2-
aminomethylethyl)
ether ether with
trimethylolpropane
(3:1)
P-10-0091 11/24/09 02/21/10 CBI (G) Polymer additive (S) Fatty acids, C18-
laundry care unsaturated, dimers,
products hydrogenated,
polymers with 4-
aminobenzoic acid,
1,6-
diisocyanatohexane,
polypropylene glycol
diamine and
polypropylene glycol
mono(2-
aminomethylethyl)
ether ether with
trimethylolpropane
(3:1)
P-10-0092 11/24/09 02/21/10 CBI (G) Polymer additive (S) Fatty acids, C18-
laundry care unsaturated, dimers,
products hydrogenated,
polymers with
polymethylenepolyphe
nylene isocyanate,
polypropylene glycol
diamine and
polypropylene glycol
mono(2-
aminomethylethyl)
ether ether with
trimethylolpropane
(3:1)
P-10-0093 11/24/09 02/21/10 CBI (G) Polymer additive (S) Fatty acids, C18-
laundry care unsaturated, dimers,
products hydrogenated,
polymers with 4-
aminobenzoic acid,
polymethylenepolyphe
nylene isocyanate,
polypropylene glycol
diamine and
polypropylene glycol
mono(2-
aminomethylethyl)
ether ether with
trimethylolpropane
(3:1)
P-10-0094 11/24/09 02/21/10 CBI (G) Polymer additive (S) Fatty acids, C18-
laundry care unsaturated, dimers,
products polymers with 4-
aminobenzoic acid,
1,6-
diisocyanatohexane,
polypropylene glycol
diamine and
polypropylene glycol
mono(2-
aminomethylethyl)
ether ether with
trimethylolpropane
(3:1)
P-10-0095 11/24/09 02/21/10 CBI (G) Polymer additive (S) Fatty acids, C18-
laundry care unsaturated, dimers,
products polymers with 4-
aminobenzoic acid,
polymethylenepolyphe
nylene isocyanate,
polypropylene glycol
diamine and
polypropylene glycol
mono(2-
aminomethylethyl)
ether ether with
trimethylolpropane
(3:1)
P-10-0096 11/30/09 02/27/10 CBI (G) Industrial (G) Aminated epoxy
coating binder salts
P-10-0097 11/30/09 02/27/10 CBI (G) Industrial (G) Aminated epoxy
coating additive for salt
electrocoat
P-10-0098 11/25/09 02/22/10 CBI (G) Additive for (G) 2-propenoic acid,
pigment ink 2-methyl-, polymer
with substituted
esters with acrylic
acid and 2-propenoic
acid
P-10-0099 12/02/09 03/01/10 CBI (G) Modifier for (S) Phosphonic acid,
polymers p-octyl-,
lanthanum(3+) salt
(2:1)
P-10-0100 12/03/09 03/02/10 CBI (G) Additive, open, (G) Polyester amine
non-dispersive use compound
P-10-0101 12/03/09 03/02/10 CBI (G) Chemical (G) Aromatic
intermediate polyester
P-10-0102 12/03/09 03/02/10 Robertet, Inc. (S) As an odoriferous (S) Definition:
component of Extractives and
fragrance compounds their physically
modified derivatives
jasminum sambac.
P-10-0102 12/03/09 03/02/10 Robertet, Inc. (S) As an odoriferous (S) Oils, jasmine,
component of jasminum sambac
fragrance compounds
[[Page 11409]]
P-10-0103 12/04/09 03/03/10 CBI (G) Resin for ultra (S) Fatty acids, C18-
violet curable unsaturated, di-me
adhesives esters,
hydrogenated,
polymers with
diethylene glycol,
1,6-diisocyanato-
2,2,4-
trimethylhexane, 1,6-
diisocyanato-2,4,4-
trimethylhexane, 2-
heptyl-3,4-bis(9-
isocyanatononyl)-1-
pentylcyclohexane,
1,1'-methylenebis[4-
isocyanatobenzene],
2-oxepanone and
tricyclodecanedimeth
anol, 2-hydroxyethyl
acrylate-blocked
P-10-0104 12/08/09 03/07/10 Henkel Corporation (S) Fragrance for (S) Silicic acid, 1-
fabric softener ethenylhexyl ethyl
ester
P-10-0105 12/09/09 03/08/10 CBI (S) Plasticizer for (S) 1,2-cyclohexane
use with pvc and dicarboxylic acid
rubber bis (2-ethylhexyl)
ester
P-10-0106 12/10/09 03/09/10 Instrumental Polymer (G) Resin for (G) Hydroxyl -
Technologies, LLC coatings terminated aliphatic
polycarbonate
P-10-0107 12/10/09 03/09/10 CBI (G) (1) Polymer (S) Multiwall carbon
composites : Open, nanotubes
non-dispersive use;
(2) Liquid
dispersions : Open,
non-dispersive use;
(3) Liquid
dispersion :
Contained use
P-10-0108 12/10/09 03/09/10 CBI (S) Antioxidant for (G) Thioether
plastic articles antioxidant
P-10-0109 12/08/09 03/07/10 CBI (G) Coating additive (G) Urethane acrylate
oligomer
P-10-0110 12/11/09 03/10/10 CBI (G) Detergent (G) Polyester
P-10-0111 12/10/09 03/09/10 The Dow Chemical (S) Component rigid (G) Benzene
Company polyurethane foams dicarboxylic acid,
for construction polyester with
panels; component glycol and
rigid polyurethane polyethylene glycol
foam for appliances;
component rigid foam
spray applications
P-10-0112 12/10/09 03/09/10 The Dow Chemical (S) Component rigid (G) Benzene
Company polyurethane foams dicarboxylic acid,
for construction polyester with
panels; component glycol and
rigid polyurethane polyethylene glycol
foam for appliances;
component rigid foam
spray applications
P-10-0113 12/10/09 03/09/10 The Dow chemical (S) Component rigid (G) Benzene
Company polyurethane foams dicarboxylic acid,
for construction polyester with
panels; component glycol and
rigid polyurethane polyethylene glycol
foam for appliances;
component rigid foam
spray applications
P-10-0114 12/10/09 03/09/10 The Dow Chemical (S) Component rigid (G) Benzene
Company polyurethane foams dicarboxylic acid,
for construction polyester with
panels; component glycol and
rigid polyurethane polyethylene glycol
foam for appliances;
component rigid foam
spray applications
P-10-0115 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type:
conductivity PR-19 (nanofiber
additive for grade: XT-PS
composites;
mechanical
reinforcement for
composites; additive
for battery
electrodes
P-10-0116 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type:
conductivity PR-19 (nanofiber
additive for grade: XT-LHT)
composites;
mechanical
reinforcement for
composites; additive
for battery
electrodes
P-10-0117 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type:
conductivity PR-19 (nanofiber
additive for grade: XT-HHT)
composites;
mechanical
reinforcement for
composites; additive
for battery
electrodes
P-10-0118 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type:
conductivity PR-24 (nanofiber
additive for grade: XT-PS)
composites;
mechanical
reinforcement for
composites; additive
for battery
electrodes
P-10-0119 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type:
conductivity PR-24 (nanofiber
additive for grade: XT-LHT)
composites;
mechanical
reinforcement for
composites; additive
for battery
electrodes
P-10-0120 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type:
conductivity PR-24 (nanofiber
additive for grade: XT-HHT)
composites;
mechanical
reinforcement for
composites; additive
for battery
electrodes
[[Page 11410]]
P-10-0121 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type:
conductivity PR-19 (nanofiber
additive for grade: XT-PS-AM)
composites;
mechanical
reinforcement for
composites; additive
for battery
electrodes
P-10-0122 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type:
conductivity PR-19 (nanofiber
additive for grade: XT-LHT-AM)
composites;
mechanical
reinforcement for
composites; additive
for battery
electrodes
P-10-0123 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type:
conductivity PR-19 (nanofiber
additive for grade: XT-HHT-AM)
composites;
mechanical
reinforcement for
composites; additive
for battery
electrodes
P-10-0124 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type:
conductivity PR-24 (nanofiber
additive for grade: XT-PS-AM)
composites;
mechanical
reinforcement for
composites; additive
for battery
electrodes
P-10-0125 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type:
conductivity PR-24 (nanofiber
additive for grade: XT-LHT-AM)
composites;
mechanical
reinforcement for
composites; additive
for battery
electrodes
P-10-0126 12/11/09 03/10/10 CBI (S) Electrical (S) Nanofiber type:
conductivity PR-24 (nanofiber
additive for grade: XT-HHT-AM)
composites;
mechanical
reinforcement for
composites; additive
for battery
electrodes
P-10-0127 12/14/09 03/13/10 CBI (G) Industrial (G) Blocked
coating binder isocyanate
crosslinker
P-10-0128 12/14/09 03/13/10 CBI (G) Filling material (S) Siloxanes and
silicones, di-me, 3-
hydroxypropyl group-
terminated,
ethoxylated,
polymers with 1,6-
diisocyanato-2,2,4-
trimethylhexane, 1,6-
diisocyanato-2,4,4-
trimethylhexane,
polypropylene glycol
ether with glycerol
(3:1) and
polypropylene glycol
ether with
pentaerythritol
(4:1), polypropylene
glycol mono-bu ether-
blocked
P-10-0129 12/16/09 03/15/10 Henkel Corporation (S) A polymerizable (S) Benzene, 1,3-
component of bis(1-chloro-1-
industrial adhesive methylethyl)-,
and sealant reaction products
with
polyisobtutylene and
trimethyl-2-propen-1-
ylsilane
P-10-0130 12/16/09 03/15/10 Alberdingk Boley, (S) Polyurethane (G) Linseed oil,
Inc. coating for wood ester with
pentaerythritol,
polymer with .alpha.-
hydro-.omega.-
hydroxypoly(oxy-1,4-
butanediyl), 3-
hydroxy-2-
(hydroxymethyl) 2-
methylpropanoic acid
and 5-isocyanato-1-
(isocyanatomethyl)-
alkylcyclohexane,
compounds with
triethylamine
P-10-0131 12/16/09 03/15/10 CBI (G) Rheological (G) Polyester salt of
additive for paints hydrogenated dimer
of fatty acids and
glycerol.
P-10-0132 12/16/09 03/15/10 CBI (S) Catalyst (G) Aromatic
complexing agent hydrocarbon
P-10-0133 12/17/09 03/16/10 CBI (G) Chemical (G) Alkyl sulfide,
intermediate - manufacture of, by-
destructive use products from,
distant lights
P-10-0134 12/17/09 03/16/10 CBI (G) Chemical (G) Alkyl sulfide,
intermediate - manufacture of, by-
destructive use products from,
distant lights
P-10-0135 12/17/09 03/16/10 3M Company (G) Heat transfer (G) Fluoroketone
fluid
P-10-0136 12/17/09 03/16/10 CBI (G) Monomer for (G) Polythiol
industrial paints,
coatings, ink and
adhesives
P-10-0137 12/18/09 03/17/10 CBI (G) Coating agent (G) Substituted
polyethyleneimine
P-10-0138 12/18/09 03/17/10 CBI (G) Perfoemance (G) Long chain
chemical for alkylacrylate,
oilfield homopolymers
applications
P-10-0139 12/18/09 03/17/10 CBI (G) Perfoemance (G) Long chain
chemical for alkylacrylate,
oilfield homopolymers
applications
P-10-0140 12/18/09 03/17/10 CBI (G) Adhesive for car (G) Urethane modified
epoxy resin
P-10-0141 12/18/09 03/17/10 CBI (G) Adhesive (G) Carbohydrate
component
P-10-0142 12/22/09 03/21/10 CBI (G) Component of (G) Furan, 2-(1,1-
fragrance mixture dimethylethyl)-2, 5-
for highly- dihydro-alkyl
dispersive substituted
applications
P-10-0143 12/22/09 03/21/10 Instrumental Polymer (G) Resin for (G) Hydroxyl-
Technologies, LLC coatings terminated aliphatic
polycarbonate
[[Page 11411]]
P-10-0144 12/22/09 03/21/10 Wacker Chemical (S) Additive for (G) Methyl-phenyl
Corporation paper and foil silicone resin with
coatings and bonding alkoxy groups
agents
P-10-0145 12/23/09 03/22/10 Henkel Corporation (S) Fragrance for (S) Silicic acid, 9-
fabric softener decen-1-yl ethyl
ester
P-10-0146 12/23/09 03/22/10 CBI (G) Processing aid (G) Alkyl substituted
polyamide
P-10-0147 12/23/09 03/22/10 Huntsman Corporation (G) Intermediate (G) Alkoxylated
amine alkylamine
P-10-0148 12/23/09 03/22/10 CBI (G) Ethoxylation (G) Partially
initiator fluorinated borate
ester
P-10-0149 12/23/09 03/22/10 Huntsman Corporation (G) Grinding aid (G) Alkoxylated
alkylamine salt
P-10-0150 12/24/09 03/23/10 Instrumental polymer (G) Resin for (G) Hydroxy -
technologies, LLC coatings terminated;
aliphatic
polycarbonate
P-10-0151 12/23/09 03/22/10 Henkel Corporation (S) Cure accelerator (S) 1,2-propanediol,
in industrial 3-(3,4-dihydro-1(2H)-
adhesive quinolinyl)-
formulations
P-10-0152 12/24/09 03/23/10 CBI (G) Filler dispersant (G) Phosphated
polyalkoxylate
P-10-0153 12/24/09 03/23/10 Sachem, Inc. (G) Chemical (S) 1H-imidazole, 1-
intermediate (1-methylethyl)-
P-10-0154 12/23/09 03/22/10 Henkel Corporation (S) Cure modifier in (S) Quinoline, 1-
industrial adhesive butyl-1,2,3,4-
formulations tetrahydro-
P-10-0155 12/24/09 03/23/10 CBI (G) Open, non- (G) Acid-functional
dispersive use. oligomer
P-10-0156 12/23/09 03/22/10 Huntsman (S) Disperse dye for (G) Substituted
International, LLC polyester fabrics phenyl azo
substituted phenyl
alkyl substituted
indole
P-10-0157 12/28/09 03/27/10 Henkel Corporation (S) A polymerizable (S) 2-propenoic acid,
component in novel 2-methyl-, octahydro-
adhesive and sealant 4, 7-methano-1h-
formulations inden-5-yl ester
P-10-0158 12/28/09 03/27/10 Henkel Corporation (S) A polymerizable (S) Disiloxane,
component in 1,1,3,3-tetramethyl-
industrial adhesive , polymer with 1,7-
formulations octadiene
P-10-0159 12/29/09 03/28/10 CBI (G) Coatings additive (G) Polycyclic
polyamine diester
organometallic
compound
P-10-0160 01/04/10 04/03/10 CBI (G) Lithographic inks (G) Polyester
acrylate
P-10-0161 01/04/10 04/03/10 Gelest, Inc. (S) Conversion to (S) Silane,
isopropyldimethylchl dimethyl(1-
orosilane; Research methylethyl)-
P-10-0162 01/04/10 04/03/10 Gelest, Inc. (S) Conversion to (3- (S) Silane,
isopropyldimethylsil chlorodimethyl(1-
oxy)prop-1-yl methylethyl)-
chloride; Research
P-10-0163 01/04/10 04/03/10 Gelest, Inc. (S) Conversion to (S) Silane, (3-
lithium reagent; chloropropoxy)dimeth
Research yl(1-methylethyl)-
P-10-0164 01/05/10 04/04/10 Worwag Coatings LLC (S) Automotive part (G) Aliphatic
paint additive diisocyanates,
modified dimer fatty
acid,
polyesterpolyol,
bishydroxymethylprop
ionic acid polymer
P-10-0165 01/06/10 04/05/10 CBI (G) Printing additive (G) Polyester resin
P-10-0166 01/07/10 04/06/10 CBI (G) Adhesive (G) 1,1'-
component methylenebis[isocyan
atobenzene], polymer
with polyester
polyols and a
polyether polyol
P-10-0167 01/08/10 04/07/10 CBI (G) Flame retardant (G) Brominated
aromatic oligomer
P-10-0168 01/11/10 04/10/10 CBI (S) Resin for (G) Polyester
coatings for metal polyurethane
P-10-0169 01/11/10 04/10/10 CBI (G) Chemical (G) Alkyl thiols,
intermediate - manufacturer of, by-
destructive use products from,
distant heavies
P-10-0170 01/12/10 04/11/10 CBI (G) Coatings (G) Urethane acrylate
P-10-0171 01/13/10 04/12/10 Sachem, Inc. (G) Chemical (S) 1H-imidazolium,
intermediate 1,3-bis(1-
methylethyl)-,
bromide
P-10-0172 01/13/10 04/12/10 Sachem, Inc. (G) Destructive use (S) 1H-imidazolin,
catalyst 1,3-bis(1-
methylethyl)-,
hydroxide
P-10-0173 01/14/10 04/13/10 The Shepherd Chemical (G) Automotive (G) Vinylimidazole
Company additive (VIMA) grafted poly
alpha olefin (PAO)
complexed with
diisopropoxy
titanium bis-
acetylacetonate
P-10-0174 01/14/10 04/13/10 The Shepherd Chemical (G) Automotive (G) Vinylimidazole
Company additive (VIMA) grafted poly
alpha olefin (PAO)
complexed with
molybdenum borate
neodecanoate
P-10-0175 01/14/10 04/13/10 CBI (G) Open (G) Aliphatic
nondispersive hydroxyfunctional
(component in polyester-
polyurethane polyurethane
coating) dispersion
[[Page 11412]]
P-10-0176 01/15/10 04/14/10 CBI (G) Electrographic (G) Aliphatic
toner polycarboxylic acid,
polymer with
aromatic
polycarboxylic acid
and aliphatic polyol
P-10-0177 01/19/10 04/18/10 Umicore Precious (S) Inhibited curing (G) PT carbonyl
Metals NJ, LLC agent cyclosiloxane
P-10-0178 01/19/10 04/18/10 Hitachi Chemical Co. (S) Adhesive for (S) 2-propenoic acid,
America, Ltd. semiconductor 2-methyl-, 2-
packages oxiranylmethyl
ester, polymer with
butyl 2-propenoate,
ethyl 2-propenoate
and 2-propenenitrile
P-10-0179 01/19/10 04/18/10 CBI (G) Industrial liquid (G) Polymer of tall
coatings oil fatty acid,
aliphatic diols,
aliphatic polyols,
and aromatic acids
P-10-0180 01/19/10 04/18/10 CBI (S) Curing agent or (G) Alkanediamines
accelerator for polymer with 1,6-
epoxy resin diisocyanatohexane,
1H-imidazole-1-
propanamine -blocked
P-10-0181 01/19/10 04/18/10 The Dow Chemical (G) Component of (G) Phenyl glycidyl
Company electrical laminates ether derivative
P-10-0182 01/19/10 04/18/10 CBI (G) Coated particles (G) Aromatic
for support isocyanate reaction
product with sand
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the TME
received:
II. 1 Test Marketing Exemption Notices Received From: 10/26/09 to 1/22/10
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-10-0001 10/28/09 12/11/09 PPG Industries, Inc. (G) Component of a (G) Aromatic
coating polyurethane
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table III of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
III. 117 Notices of Commencement From: 10/26/09 to 1/22/10
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-04-0179 11/17/09 11/10/09 (G) Tertiary amine
carboxylic acid compound
P-04-0426 12/01/09 10/27/09 (G) Dithiophosphate alkyl
ester
P-04-0456 11/04/09 10/23/09 (G) Neutralized acrylic
polymer
P-05-0080 12/28/09 12/08/09 (G) Chemical 1: Paraffinic
light base oil
P-05-0081 12/28/09 12/08/09 (G) Paraffinic heavy base
oil
P-05-0082 12/28/09 12/08/09 (G) Hydrotreated middle
distillate
P-05-0083 12/28/09 12/08/09 (G) Light catalytic
cracked distillate
P-05-0084 12/28/09 12/08/09 (G) Hydrocracked light
distillate
P-05-0085 12/28/09 12/08/09 (G) Hydrotreated light
distillate
P-05-0086 12/28/09 12/08/09 (G) Hydrocracked heavy
distillate
P-05-0088 11/16/09 10/24/09 (G) Branched and linear
hydrocarbons
P-05-0090 12/28/09 12/08/09 (G) Chemical 1: Heavy
naphtha
P-05-0091 12/28/09 12/08/09 (G) Chemical 2:
Hydrocracked heavy
naphtha
P-05-0092 12/28/09 12/08/09 (G) Hydrodesulfurized
heavy naphtha
P-05-0093 12/28/09 12/08/09 (G) Neutralized light
naphtha
P-05-0094 12/28/09 12/08/09 (G) Hydrotreated heavy
naphtha
P-05-0095 12/28/09 12/08/09 (G) Catalytic cracked
heavy naphtha
P-05-0096 12/28/09 12/08/09 (G) Chemical 1: Light
naphtha
P-05-0097 12/28/09 12/08/09 (G) Chemical 2:
Hydrocracked light
naphtha
P-05-0098 12/28/09 12/08/09 (G) Hydrodesulfurized
light naphtha
P-05-0099 12/28/09 12/08/09 (G) Neutralized light
naphtha
P-05-0100 12/28/09 12/08/09 (G) Catalytic cracked
light naphtha
P-05-0101 12/28/09 12/08/09 (G) Hydrotreated light
naphtha
P-07-0013 01/06/10 12/07/09 (G) Alkylphenol novolak
modified with amine and
epoxy
P-07-0356 12/23/09 12/14/09 (G) Polymer with aliphatic
diisocyanates,
polycarbonatediol and
bishydroxymethylproionic
acid
[[Page 11413]]
P-07-0358 01/06/10 12/18/09 (G) Hexitol, anhydro-,
bis[[(1-oxo-2-
propenyl)oxy]benzoate],
polymer with phenylene
bis[[(1-oxo-2-
propenyl)oxy]alkyl(C1-
C10)oxy benzoate]
P-07-0418 10/28/09 09/16/09 (G) Hydrogenated
polyalphaolefins
P-07-0435 12/23/09 12/14/09 (G) Copolymer of acrylic
acrylates, methacrylates
and acid
P-07-0586 11/10/09 10/30/09 (G) Polydimethysaline
P-07-0622 11/02/09 10/23/09 (G) Alkanoldioic acid,
dialkyl ester
P-08-0046 11/30/09 11/20/09 (G) Mixed metal oxide
complex
P-08-0047 11/30/09 11/11/09 (G) Metal oxide complex
P-08-0069 12/07/09 11/18/09 (G) Alkenyl succinimide
P-08-0179 12/15/09 12/03/09 (G) 1,2,3-
propanetricarboxamide
derivative
P-08-0219 12/30/09 12/28/09 (S) 1,3-cyclopentadiene, 5-
butyl-
P-08-0238 11/02/09 10/12/09 (G) Water-borne silicone
grafted (meth)acrylic
copolymer
P-08-0508 10/26/09 10/05/09 (G) Perfluorinated
aliphatic carboxylic acid
P-08-0631 11/16/09 11/04/09 (G) Alkenoic acid polymer
with (poly)hydroxy
substituted alkane, ester
with acryloylcarbamic
acid
P-08-0669 11/10/09 11/03/09 (G) Urethane acrylate
P-08-0670 12/11/09 11/03/09 (G) Urethane acrylate
P-08-0707 11/19/09 11/01/09 (S) 2H-2,4A-
methanonaphthalen-1(5H)-
one, hexahydro-5,5-
dimethyl-
P-09-0048 10/28/09 10/06/09 (G) Surface modified
ceramic particles
P-09-0061 12/11/09 12/08/09 (G) Hydroxy-chloro-
cyclopropyl-
heteromonocycliccarboxyli
c acid
P-09-0075 11/03/09 10/09/09 (G) Aliphatic, aromatic
unsaturated bicyclic
derivative
P-09-0076 12/08/09 11/26/09 (G) Diamino - (substituted
phenylazo) - benzene
sulfonic acid, salt
P-09-0115 11/02/09 10/07/09 (G) Alkanedioic acid,
polymer with N-
(aminoalkyl)-
alkyldiamine,
(chloromethyl)oxirane and
alkylpolyol, acid salt
P-09-0120 01/05/10 12/14/09 (G) Epoxidized siloxane
P-09-0127 01/11/10 12/19/09 (G) Aliphatic polyurethane
resin aqueous dispersion
P-09-0141 01/19/10 12/18/09 (G) 1,3-ethyl,
methylimidazolium
undecafluoro substituted
ionic methalic species
P-09-0160 12/07/09 11/26/09 (G) 2-propenoic acid,
polymer with butyl 2-
propenoate, (2,3,4,5,6-
pentabromophenyl) methyl
2-propenoate and
substitute acrylates
P-09-0165 11/03/09 07/07/09 (G) Modified, saturated
polyester resin
P-09-0166 11/16/09 11/10/09 (G) Butylated melamine
P-09-0172 12/15/09 12/04/09 (G) Substituted carboxylic
acid reaction product
with substituted amine
and amide, acetates
P-09-0174 12/09/09 11/13/09 (G)
Perfluoroalkylethylmethac
rylate copolymer
P-09-0200 01/14/10 11/15/09 (G) Alkanoic acid,
potassium salt
P-09-0210 12/08/09 11/23/09 (G) Furandione polymer
with ethenylbenzene,
alkyl ester
P-09-0245 12/16/09 12/14/09 (G) Partially fluorinated
alcohol, reaction
products with phosphorus
oxide (P2O5), ammonium
salts
P-09-0246 12/29/09 12/22/09 (G) Partially fluorinated
alcohol, reaction
products with phosphorus
oxide (P2O5)
P-09-0247 12/28/09 12/05/09 (G) Acrylamide-based
copolymer
P-09-0253 12/11/09 11/27/09 (G) Polyether polyester
copolymer phosphate
P-09-0254 11/06/09 11/02/09 (G) Polyacrylate, modified
with siloxanes
P-09-0257 11/24/09 10/18/09 (S) Multi-wall carbon
nanotube
P-09-0271 11/27/09 11/17/09 (G) Aryl alkylphosphonate
P-09-0279 11/02/09 10/29/09 (G) Styrene-maleic
anhydride copolymer,
reaction product with
amino compounds
P-09-0286 11/06/09 10/28/09 (G) Poly(oxyalkylenediyl),
a-substituted
carbomonocycle-.omega.-
substituted
carbomonocycle
P-09-0289 10/27/09 08/05/09 (G) Solid epoxy resin
P-09-0308 11/16/09 11/05/09 (G) Amine modified
polyester acrylate
P-09-0347 11/05/09 10/09/09 (G) Alkyl diphenyl ether
P-09-0374 11/23/09 10/30/09 (G) Fatty acids, polymers
with adipic acid, 1,6-
hexandiol, 3-hydroxy-2-
(hydroxymethyl)-2-
methylpropanoic acid and
1,1'-methylenebis[4-
isocyanatocyclohexane],
compounds with
triethylamine
P-09-0379 11/03/09 09/15/09 (G) High molecular weight
polyester
P-09-0386 11/09/09 10/14/09 (G) Alkenyl succinic
anhydride
P-09-0409 10/27/09 10/16/09 (G) Urethane acrylate
P-09-0414 12/01/09 11/04/09 (G) Polyester resin
P-09-0427 11/03/09 10/28/09 (G) Phenol, 4,4'-(1-
methylethylidene)bis-,
polymer with 2-
(chloromethyl)oxirane,
reaction products with
dithiol
P-09-0428 12/17/09 12/10/09 (G) Mixed metal oxide
complex
P-09-0435 11/10/09 11/02/09 (S) 6,8-dimethyl-7-nonenal
P-09-0451 12/22/09 12/09/09 (G) Butanamide, N-
[substituted phenyl]-
[(alkoxynitrophenyl)diaze
nyl]-3-oxo-
P-09-0453 11/04/09 10/27/09 (G) Urethane prepolymer
P-09-0454 01/05/10 11/16/09 (G) Polyurethane
P-09-0477 11/12/09 11/06/09 (G) Fluoroalkyl
sulfonamide
P-09-0478 12/23/09 12/10/09 (G) Modified polyol
P-09-0481 12/22/09 12/02/09 (G) Fluorinated polymer
P-09-0485 11/13/09 11/07/09 (G) Fluorinated
sulfonamide alcohol
P-09-0490 12/09/09 11/18/09 (S) 2H-1,5-benzodioxepin-3
(4H)-one, 7-(1-
methylethyl)-
[[Page 11414]]
P-09-0498 12/14/09 12/07/09 (G) Aromatic dicarboxylic
acid, polymer with
cycloaliphatic diamine, 2-
(chloromethyl)oxirane,
alkyldioic acid and an
aryl diphenol
P-09-0499 12/30/09 10/21/09 (G) Aromatic polyether
polymer
P-09-0511 12/08/09 12/03/09 (G) Fluoroalkyl acrylate
copolymer
P-09-0531 11/30/09 11/12/09 (G) Acrylic solution
polymer
P-09-0534 01/05/10 11/16/09 (G) Carbamic acid,
(methylenedicyclohexanedi
yl)bis-mixed diesters
with polyethylene glycol
and polyethylene glycol
mono ethers
P-09-0536 01/05/10 11/16/09 (G) Carbamic acid,
(methylenedicyclohexanedi
yl)bis-mixed diesters
with unsaturated
alcohols, polyethylene
glycol and polyethylene
glycol mono ethers
P-09-0537 01/05/10 11/16/09 (G) Polyethylene glycol,
alpha, alpha', alpha''-
propanetrilmonoesters
with
[[[carboxyaminitrimethylc
yclohexyl]methyl]amino]ca
rbonyl]-
octadecenyloxy)polyethyle
ne glycol
P-09-0538 01/05/10 11/16/09 (G) Carbamic acid,
(methylenedicyclohexanedi
yl)bis-mixed diesters
with isoalcohols,
polyethylene glycol and
polyethylene glycol mono
ethers
P-09-0539 01/05/10 11/16/09 (G) Carbamic acid,
(trimethylhexanediyl)bis-
mixed diesters with
unsaturated alcohols,
isoalcohols and
polyethylene glycol
P-09-0544 12/10/09 12/01/09 (G) Polyalkyleneglycol,
reaction products with
hydroxyalkyl acrylate,
dihydroxyalkyl alkanoic
acid, sodium-aminoalkyl-
alaninate, sodium salt
P-09-0555 11/30/09 11/18/09 (G) Acrylate, polymer with
aromatic vinyl monomer
and acrylates
P-09-0564 12/07/09 11/20/09 (G) Polyurethane
prepolymer
P-09-0570 12/28/09 12/04/09 (G) Alkyl thiol,
manufacturer of, by-
products from, distant
heavies
P-09-0572 12/23/09 12/10/09 (G) Alkyl thiol,
manufacturer of, by-
products from, distant
heavies
P-09-0573 12/23/09 12/04/09 (G) Alkyl thiol,
manufacturer of, by-
products from, distant
residues heavies
P-09-0575 12/18/09 12/13/09 (G) Naphthalenesulfonic
acid, [(chloro-methyl-
sulfophenyl)diazenyl]-
hydroxy-metal salt
P-09-0578 12/18/09 12/13/09 (G) Naphthalenesulfonic
acid, [(methyl-
sulfophenyl)diazenyl]-
hydroxy-metal salt
P-09-0581 12/30/09 12/16/09 (G) Styrenyl surface
treated manganese ferrite
P-09-0582 12/30/09 12/16/09 (G) Acrylate polymer
stabilized manganese
ferrite
P-09-0583 01/14/10 12/16/09 (G) Anthraquinone acid dye
salt
P-09-0584 01/14/10 12/16/09 (G) Copper phthalocyanine
direct dye salt
P-09-0585 12/07/09 11/20/09 (G) Polymer of aliphatic
cyclic methacrylic acid
and aliphatic methacrylic
acid ester
P-09-0587 12/08/09 11/24/09 (S) Butanedioic acid, 2-
methylene-,
monoisooctadecyl ester
P-09-0588 12/08/09 11/25/09 (S) Butanedioic acid, 2-
methylene-,
monoisooctadecyl ester,
palladium(2+) salt (2:1)
P-09-0592 01/13/10 12/22/09 (G) Aqueous polyurethane
resin dispersion
P-09-0598 12/18/09 12/07/09 (G) Alkyl acrylic acid,
polymer with alkyl
acrylate alkyl ester and
alkyldiyl diacrylate
P-09-0600 12/30/09 11/29/09 (G) Alkyl thiol,
manufacturer of, by-
products from, distant
lights
P-09-0612 12/07/09 11/30/09 (G) Silane treated glass
P-09-0615 01/19/10 01/07/10 (S) Alkenes, C26-30
.alpha.-, polyoumd.
P-10-0003 01/19/10 01/12/10 (G) Alkyl thiol,
manufacturer of by-
products from, distant
lights
P-10-0004 01/19/10 01/12/10 (G) Alkyl thiol,
manufacturer of by-
products from, distant
residues
P-97-1011 12/14/09 06/05/98 (S) Oxirane, 2,2'-
(methylenebis ((2,6-
dimethyl-4,1phenylene)
oxymethylene))bis-
P-98-0543 01/13/10 12/31/09 (G) Polyurethane with
carboxy functions
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: March 1, 2010.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 2010-5129 Filed 3-9-10; 8:45 am]
BILLING CODE 6560-50-S