[Federal Register Volume 75, Number 34 (Monday, February 22, 2010)]
[Rules and Regulations]
[Pages 7550-7551]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2010-3297]


=======================================================================
-----------------------------------------------------------------------

CONSUMER PRODUCT SAFETY COMMISSION

16 CFR Part 1130


Requirements for Consumer Registration of Durable Infant or 
Toddler Products; Correction

AGENCY: Consumer Product Safety Commission.

ACTION: Final rule; correction.

-----------------------------------------------------------------------

SUMMARY: The Consumer Product Safety Commission (``Commission'') is 
correcting a final rule that appeared in the Federal Register of 
December 29, 2009 (74 FR 68668). The document issued a final rule under 
section 104(d) of the Consumer Product Safety Improvement Act of 2008 
(``CPSIA'') requiring manufacturers of durable infant or toddler 
products to establish and maintain a system for consumers to register 
their products with the manufacturer.

DATES: The correction will become effective on June 28, 2010.

FOR FURTHER INFORMATION CONTACT: Marc Schoem, Deputy Director, Office 
of

[[Page 7551]]

Compliance and Field Operations, Consumer Product Safety Commission, 
4330 East-West Highway, Bethesda, MD 20814; telephone (301) 504-7520; 
[email protected].

SUPPLEMENTARY INFORMATION: In FR Doc. E9-30485 appearing on page 68668 
in the Federal Register of Tuesday, December 29, 2009, there was a 
discrepancy between the text describing the registration form and the 
figures illustrating the form. The regulatory text reversed the 
location of information on the bottom of the form. To address this, the 
following corrections are made:


Sec.  1130.6  [Corrected]

    1. On page 68677, in the first and second columns, in Sec.  1130.6, 
in paragraph (b)(3), ``The bottom front panel shall have blocks for the 
consumer to provide his/her contact information as required in Sec.  
1130.7(c).'' is corrected to read ``The bottom back panel of the form 
shall have blocks for the consumer to provide his/her contact 
information as required in Sec.  1130.7(c).''
    2. On page 68677, in the second column, in Sec.  1130.6, in 
paragraph (b)(3), ``The back of the bottom portion of the form shall be 
pre-addressed and postage-paid with the manufacturer's name and mailing 
address where registration information is to be collected.'' is 
corrected to read ``The front of the bottom portion of the form shall 
be pre-addressed and postage-paid with the manufacturer's name and 
mailing address where registration information is to be collected.''

    Dated: February 16, 2010.
Todd Stevenson,
Secretary, U.S. Consumer Product Safety Commission.
[FR Doc. 2010-3297 Filed 2-19-10; 8:45 am]
BILLING CODE 6355-01-P