[Federal Register Volume 75, Number 25 (Monday, February 8, 2010)]
[Notices]
[Pages 6169-6173]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2010-2693]
=======================================================================
-----------------------------------------------------------------------
COMMITTEE FOR THE IMPLEMENTATION OF TEXTILE AGREEMENTS
Request for Public Comment on a Commercial Availability Request
Under the U.S.-Singapore Free Trade Agreement
February 2, 2010.
AGENCY: Committee for the Implementation of Textile Agreements (CITA).
ACTION: Request for public comments concerning a request for
modification of the U.S.-Singapore Free Trade Agreement (USSFTA) rules
of origin for certain apparel articles
-----------------------------------------------------------------------
SUMMARY: On October 29, 2008, the Government of the United States
received a request from the Government of Singapore for consultations
under Article 3.18.4(a)(i) of the USSFTA. Singapore is seeking
agreement to revise the rules of origin for certain apparel articles to
address availability of supply of certain fabrics in the territories of
the Parties. The President may proclaim a modification to the USSFTA
rules of origin for textile and apparel products after reaching an
agreement with the Government of Singapore on the modification. CITA
hereby solicits public comments on this request, in particular with
regard to whether certain fabrics can be supplied by the domestic
industry in commercial quantities in a timely manner. Comments must be
submitted by March 10, 2010 to the Chairman, Committee for the
Implementation of Textile Agreements, Room 3001, United States
Department of Commerce, Washington, DC 20230.
FOR FURTHER INFORMATION CONTACT: Jim Bennett, Office of Textiles and
Apparel, U.S. Department of Commerce, (202) 482-4058.
SUPPLEMENTARY INFORMATION:
Authority: Section 202(o)(2) of the United States--Singapore
Free Trade Agreement Implementation Act (19 U.S.C. 3805 note)
(USSFTA Implementation Act); Executive Order 11651 of March 3, 1972,
as amended.
Background
Under the USSFTA, the Parties are required to progressively
eliminate customs duties on originating goods. See Article 2.2. The
USSFTA provides that, after consultations, the Parties may agree to
revise the rules of origin for textile and apparel products to address
issues of availability of supply of fibers, yarns, or fabrics in the
free trade area. See Article 3.18.4. In the consultations, each Party
must consider data presented by the other party showing substantial
production in its territory of the particular good. Substantial
production has been shown if domestic producers are capable of
supplying commercial quantities of the good in a timely manner. See
Article 3.18.4.
The USSFTA Implementation Act provides the President with the
authority to proclaim modifications to the USSFTA rules of origin as
are necessary to implement the Agreement after complying with the
consultation and layover requirements of Section 103 of the USSFTA
Implementation Act. See Section 202(o)(2). Executive Order 11651
established CITA to supervise the implementation of textile trade
agreements and authorizes the Chairman of CITA to take actions or
recommend that the United States take actions necessary to implement
textile trade agreements. 37 FR 4699 (March 4, 1972).
On October 29, 2008, the Government of the United States received a
request from the Government of Singapore,
[[Page 6170]]
requesting that the United States consider whether the USSFTA rule of
origin for apparel articles should be modified to allow for the use of
certain non-U.S. and non-Singapore fabrics. The products covered by
this request are:
Specifications
(1) Certain knit fabrics of rayon yarn made from bamboo, of the
specifications detailed below, classified in the indicated subheadings
of the Harmonized Tariff Schedule of the United States (HTS), for use
in apparel articles:
Fabric 1
HTS Subheading: 6004.10.00.
Fiber Content: 57% rayon made from bamboo/36% cotton/7%
elastomeric.
Yarn Number: 51/1 metric (30/1) rayon made from bamboo and cotton;
225 metric (40 denier) spandex.
Machine Gauge: 24.
Weight: 250 g/m2 (7.4 oz/square yard).
Width: 132 centimeters (52 inches).
Finish: (Piece) dyed.
Fabric 2
HTS Subheading: 6004.10.00.
Fiber Content: 35% rayon made from bamboo/35% cotton/24% polyester/
6% spandex.
Yarn Number: 40/1 metric (24/1) rayon made from bamboo and cotton;
180 metric/72 filaments (50 denier/72 filaments) polyester; 300 metric
(30 denier) spandex.
Machine Gauge: 24.
Weight: 300 g/m2 (8.85 oz/square yard).
Width: 147.32 centimeters (58 inches).
Finish: (Piece) dyed.
Fabric 3
HTS Subheading: 6001.22.00.
Fiber Content: 79% rayon made from bamboo/15% polyester/6% spandex.
Yarn Number: 40/1 metric (24/1) rayon made from bamboo; 300 metric
(30 denier) spandex.
Machine Gauge: 24.
Weight: 295 g/m2 (8.7 oz/square yard).
Width: 132 centimeters (52 inches).
Finish: (Piece) dyed.
(2) Certain knit fabrics of polyester fiber, of the specifications
detailed below, classified in the indicated subheadings of the HTS, for
use in apparel articles:
Fabric 1
HTS Subheading: 6001.22.00.
Fiber Content: 93% polyester/7% spandex.
Yarn Number: 120 metric/72 filaments (75 denier/72 filaments)
polyester; 300 metric (30 denier) spandex.
Machine Gauge: 24.
Weight: 255 g/m2 (7.52 oz/square yard).
Width: 139.7 centimeters (55 inches).
Finish: (Piece) dyed.
Fabric 2
HTS Subheading: 6004.10.00.
Fiber Content: 92% polyester \1\/8% spandex.
---------------------------------------------------------------------------
\1\ Singapore's request specifies recycled polyester.
---------------------------------------------------------------------------
Yarn Number: 72/2 metric to 75/2 metric (125/2 to 120/2) polyester;
67.7/4 metric (40/4) spandex.
Machine Gauge: 24.
Weight: 300 g/m2 (8.85 oz/square yard).
Width: 152.4 centimeters (60 inches).
Finish: (Piece) dyed.
Fabric 3
HTS Subheading: 6006.32.00.
Fiber Content: 100% polyester.\1\
Yarn Number: 72/2 metric to 75/2 metric (125/2 to 120/2).
Machine Gauge: 24.
Weight: 305 g/m2 (9 oz/square yard).
Width: 152.4 centimeters (60 inches).
Finish: (Piece) dyed.
Fabric 4
HTS Subheading: 6001.22.00.
Fiber Content: 92% polyester \1\/8% spandex.
Yarn Number: 120 metric/144 filament (75 denier/144 filament)
polyester and 72 metric to 75 metric (125 to 120); 273 metric (33
denier) spandex.
Machine Gauge: Not specified.
Weight: 270 g/m2 (7.97 oz/square yard).
Width: 152.4 centimeters (60 inches).
Finish: (Piece) dyed.
Fabric 5
HTS Subheading: 6004.10.00.
Fiber Content: 90% polyester \1\/10% spandex.
Yarn Number: 120 metric/72 filaments (75 denier/72 filaments).
Machine Gauge: 28.
Weight: 255 g/m2 (7.52 oz/square yard).
Width: 152.4 centimeters (60 inches).
Finish: (Piece) dyed.
Fabric 6
HTS Subheading: 6004.10.10.
Fiber Content: 90% polyester \1\/10% spandex.
Yarn Number: 120 metric/72 filaments (75 denier/72 filaments).
Machine Gauge: 26.
Weight: 310 g/m2 (9.15 oz/square yard).
Width: 152.4 centimeters (60 inches).
Finish: (Piece) dyed.
Fabric 7
HTS Subheading: 6006.32.00.
Fiber Content: 100% polyester.\1\
Yarn Number: 120 metric/72 filaments (75 denier/72 filaments).
Machine Gauge: 32.
Weight: 255 g/m2 (7.52 oz/square yard).
Width: 152.4 centimeters (60 inches).
Finish: (Piece) dyed.
Fabric 8
HTS Subheading: 6006.32.00.
Fiber Content: 100% polyester.\1\
Yarn Number: 120 metric/72 filaments (60 denier/72 filaments).
Machine Gauge: 28.
Weight: 310 g/m2 (9.15 oz/square yard).
Width: 152.4 centimeters (60 inches).
Finish: (Piece) dyed.
(3) Certain knit fabrics containing fibers made from soya bean, of
the specifications detailed below, classified in the indicated
subheadings of the HTS, for use in apparel articles:
Fabric 1
HTS Subheading: 6006.22.90.
Fiber Content: 60% cotton/40% soya bean.
Yarn Number: Not specified.
Machine Gauge: Not specified.
Weight: 330 g/m2 (9.74 oz/square yard).
Width: 152.4 centimeters (60 inches).
Finish: (Piece) dyed.
Fabric 2
HTS Subheading: 6004.10.00.
Fiber Content: 60% soya bean/35% cotton/5% spandex.
Yarn Number: 30/1 metric (18/1) soya bean and cotton; 225 metric
(40 denier) spandex.
Machine Gauge: 24.
Weight: 210 g/m2 (6.2 oz/square yard).
Width: 157.5 centimeters (62 inches).
Finish: (Piece) dyed.
(4) Fabric fancy polyester filament fabric, of the specifications
detailed below, classified in the indicated subheadings of the HTS, for
use in apparel articles:
HTS Subheadings: 5407.53.20.20 and 5407.53.20.60.
Fiber Content: 100% polyester.
Width: 58/60 inches.
Construction: Plain, twill and satin weaves, in combinations of 75
denier, 100 denier, 150 denier, and 300 denier yarn sizes, with mixes
of 25% cationic/75% disperse, 50% cationic/50% disperse, and 100%
cationic.
Finish: Containing at least three different yarns, each of which is
dyed a different color.
[[Page 6171]]
(5) Certain woven 100% cotton flannel fabrics, of the
specifications detailed below, classified in the indicated subheading
of the HTS, for use in apparel articles:
HTS Subheading: 5208.43.00.
Fiber Content: 100% cotton.
Yarn Number: 84 to 86 metric warp and filling (49 to 51 English).
Thread Count: 39 to 66 warp ends per centimeter x 27 to 39 filling
picks per centimeter (99 to 168 warp ends per inch x 68 to 99 filling
picks per inch).
Weave Type: 3 or 4 thread twill.
Weight: 98 to 150 g/m2 (2.9 to 4.4 ounces per sq. yard).
Finish: Of yarns of different colors, yarns are dyed with fiber
reactive dyes, plaids, checks and stripes, napped on both sides, pre-
shrunk.
(6) Certain 2-way stretch woven fabrics, of the specifications
detailed below, classified in the indicated subheading of the HTS, for
use in apparel articles:
HTS Subheading: 5515.11.00.
Fiber Content: 60% to 75% polyester/20% to 35% viscose rayon/3% to
6% spandex.
Fiber Length: 51 to 70 millimeter staple (2 to 2.75 inches).
Yarn Number: Warp and filling: 50/2 to 68/2 metric wrapped around
225 metric spandex (30/2 to 40/2 wrapped around 40-denier spandex).
Thread Count: 30 to 32 warp ends x 24 to 26 filling picks per
square centimeter (76 to 81 warp ends x 60 to 66 filling picks per
square inch).
Weave Type: Various.
Weight: 220 to 250 g/m2 (6.5 to 7.4 oz/square yard).
Width: 142 to 148 centimeters (56 to 59 inches).
Finish: Dyed, of yarns of different colors.
(7) Certain woven two-way stretch fabrics, of the specifications
detailed below, classified in the indicated subheading of the HTS, for
use in apparel articles:
HTS Subheading: 5515.11.00.
Fiber Content: 60% to 75% polyester/20% to 35% viscose rayon/3% to
6% spandex.
Staple Length: 44 to 70 mm (1.75 to 2.75 inches).
Yarn Number: 40/2 to 84/2 metric wrapped.
Warp and Filling: Around 225 to 118 metric spandex (24/2 to 40/2
English wrapped around 40 to 70 denier spandex).
Thread Count: 24 to 44 warp ends x 16 to 32 filling picks per
square centimeter.
Weave Type: Various.
Weight: 200 to 300 g/m2 (5.9 to 8.9 oz/square yard).
Width: 127 to 152 centimeters (50 to 60 inches).
Finish: (Piece) dyed and of yarns of different colors.
(8) Cotton/polyester three-thread circular knit fleece fabric, of
the specifications detailed below, classified in the indicated
subheading of the HTS, for use in apparel articles:
HTS Subheading: 6001.21.
Fiber Content: 80% cotton/20% polyester.
Yarn Number: 1. Face yarn--100% combed cotton ring spun, 49/1 to
54/1 metric.
(29/1 to 32/1), in each of the following configurations:*
(a) 100% bleached or dyed cotton.
(b) 95% undyed cotton/5% dyed cotton.
(c) 90% undyed cotton/10% dyed cotton.
(d) 80% undyed cotton/20% dyed cotton.
(e) 70% undyed cotton/30% dyed cotton.
(f) 60% undyed cotton/40% dyed cotton.
(g) 50% undyed cotton/50% dyed cotton.
(h) 40% undyed cotton/60% dyed cotton.
(i) 30% undyed cotton/70% dyed cotton.
(j) 25% undyed cotton/75% dyed cotton.
(k) 20% undyed cotton/80% dyed cotton.
*The percentages stated above may vary by up to two percentage
points.
2. Tie yarn--183 to 188/48 filament metric filament polyester (49
to 51/48 filament denier).
3. Fleece yarn--70% carded cotton/30% 3600 metric polyester staple,
26/1 to 30/1 metric ring spun (70% cotton/30% 4.0 denier polyester
staple, 15.5/1 to 18/1 ring spun).
Machine Gauge: 21.
Weight: 247 to 258 g/m2 (7.3 to 7.5 oz/square yard).
Width: Not less than 152 centimeters cuttable (not less than 60
inches cuttable).
Finish: Napped on technical back; bleached; dyed; of yarns of
different colors.
Performance Criteria: Not more than 5% vertical and horizontal
shrinkage; not more than 4% vertical torque.
(9) Certain polyester/rayon/spandex two-way stretch woven fabrics,
of the specifications detailed below, classified in the indicated
subheadings of the HTS, for use in apparel articles:
HTS Subheadings: 5407.92.20 and 5407.93.20.
Fiber Content: 70% to 75% polyester/20% to 25% viscose rayon/3% to
6% spandex.
Yarn Number: Warp: 40/2 to 85/2 metric 60% to 75% polyester staple/
20% to 35% viscose rayon staple wrapped around 225 to 126 metric
spandex (24/2 to 50/2 wrapped around 40 to 70 denier spandex).
Filling: 90 to 45 metric filament polyester wrapped around 225 to
126 metric spandex (100 to 200 denier wrapped around 40 to 70 denier
spandex).
*The stated size of the spandex yarns is in the condition as
delivered to the yarn spinner. Variance may occur in the final fabric.
Length of Staple in Warp: 1.75 to 2.75 inches.
Thread Count: 152 to 285 warp ends per centimeter x 101 to 209
filling picks per centimeter (60 to 112 warp ends per inch x 40 to 82
filling picks per inch).
Weave Type: Various.
Weight: 200 to 302 g/m2 (5.9 to 8.9 oz/square yard).
Width: 129 to 152 centimeters (50 to 60 inches).
Finish: (Piece) dyed; of yarns of different colors.
(10) Certain circular knit three-end fleece, of the specifications
detailed below, classified in the indicated subheading of the HTS, for
use in apparel articles:
HTS Subheading: 6001.21.
Fiber Content: 70% cotton/30% polyester.
Yarn Number: 1. Face yarn--100% combed cotton; 50/1 to 57/1 metric
(30/1 to 34/1).
2. Tie yarn--100% filament polyester, 179 metric/48 filaments (50
denier/48 filaments).
3. Fleece yarn--60% combed cotton/40% polyester; 18/1 to 20/1
metric (9/1 to 12/1).
Gauge: 19.
Weight: 271 to 300 g/m2 (8.0 to 8.85 oz/square yard).
Width: 152 to 183 centimeters (60 to 72 inches).
Finish: (Piece) dyed; printed.
In addition, technical back must be heavily napped to produce a
fabric thickness of not less than 4.5 millimeters, including the napped
pile. Additionally, a portion of the fabric is brushed on the technical
face to produce a sueded hand and appearance and a portion is treated
with a stain release finish. Finally, the following performance
criteria must be satisfied:
--Vertical and horizontal shrinkage must be less than 5%.
--Torque may not exceed 4%.
--All fabrics must have a Class 1 flammability rating.
--For optimum fabric integrity and stitch definition, this fabric must
be
[[Page 6172]]
knit on machines whose number of yarn feeds is a multiple of 3.
(11) Certain circular knit three-end fleece, of the specifications
detailed below, classified in the indicated subheading of the HTS, for
use in apparel articles:
HTS Subheading: 6001.21.
Fiber Content: 70% cotton/30% polyester.
Yarn Number: 1. Face yarn--100% combed cotton; 50/1 to 57/1 metric
(30/1 to 34/1).
2. Tie yarn--100% filament polyester; 179 metric/48 filaments (50
denier/48 filaments).
3. Fleece yarn--60% combed cotton/40% polyester; 18/1 to 20/1
metric (9/1 to 12/1).
Gauge: 21.
Weight: 271 to 300 g/m2 (8.0 to 8.85 oz/square yard).
Width: 152 to 183 centimeters (60 to 72 inches).
Finish: (Piece) dyed; printed.
In addition, the technical back must be heavily napped to produce a
fabric thickness of not less than 4.5 millimeters, including the napped
pile. Additionally, a portion of the fabric is brushed on the technical
face to produce a sueded hand and appearance and a portion is treated
with a stain release finish. Finally, the following performance
criteria must be satisfied:
--Vertical and horizontal shrinkage must be less than 5%.
--Torque may not exceed 4%.
--All fabrics must have a Class 1 flammability rating.
--For optimum fabric integrity and stitch definition, this fabric must
be knit on machines whose number of yarn feeds is a multiple of 3.
(12) Certain circular knit three-end fleece, of the specifications
detailed below, classified in the indicated subheading of the HTS, for
use in apparel articles:
HTS Subheading: 6001.21.
Fiber Content: 70% cotton/30% polyester.
Yarn Number: 1. Face yarn--100% combed cotton; 47/1 to 57/1 metric
(28/1 to 34/1).
2. Tie yarn--100% filament polyester; 120 metric/48 filaments (75
denier/36 filaments).
3. Fleece yarn--60% combed cotton/40% polyester; 17/1 to 24/1
metric (10/1 to 14/1).
Gauge: 18.
Weight: 271 to 300 g/m2 (8.0 to 8.85 oz/square yard).
Width: 152 to 183 centimeters (60 to 72 inches).
Finish: (Piece) dyed; printed.
In addition, the technical back must be heavily napped to produce a
fabric thickness of not less than 4.5 millimeters, including the napped
pile. Additionally, a portion of the fabric is brushed on the technical
face to produce a sueded hand and appearance and a portion is treated
with a stain release finish. Finally, the following performance
criteria must be satisfied:
--Vertical and horizontal shrinkage must be less than 5%.
--Torque may not exceed 4%.
--All fabrics must have a Class 1 flammability rating.
--For optimum fabric integrity and stitch definition, this fabric must
be knit on machines whose number of yarn feeds is a multiple of 3.
(13) Certain circular knit three end fleece, of the specifications
detailed below, classified in the indicated subheading of the HTS, for
use in apparel articles:
HTS Subheading: 6001.21.
Fiber Content: 70% cotton/30% polyester.
Yarn Number: 1. Face yarn--100% combed cotton; 47/1 to 57/1 metric
(28/1 to 34/1).
2. Tie yarn--100% filament polyester; 120 metric/48 filaments (75
denier/36 filaments).
3. Fleece yarn--60% combed cotton/40% polyester; 17/1 to 24/1
metric (10/1 to 14/1).
Gauge: 20.
Weight: 271 to 300 g/m2 (8.0 to 8.85 oz/square yard).
Width: 152 to 183 centimeters (60 to 72 inches).
Finish: (Piece) dyed; printed.
In addition, the technical back must be heavily napped to produce a
fabric thickness of not less than 4.5 millimeters, including the napped
pile. Additionally, a portion of the fabric is brushed on the technical
face to produce a sueded hand and appearance and a portion is treated
with a stain release finish. Finally, the following performance
criteria must be satisfied:
--Vertical and horizontal shrinkage must be less than 5%.
--Torque may not exceed 4%.
--All fabrics must have a Class 1 flammability rating.
--For optimum fabric integrity and stitch definition, this fabric must
be knit on machines whose number of yarn feeds is a multiple of 3.
(14) Certain raschel knit open work crepe fabric, of the
specifications detailed below, classified in the indicated subheadings
of the HTS, for use in apparel articles:
HTS Subheadings: 6005.42.00.10 and 6005.44.00.10.
Fiber Content: 73% viscose rayon/4% nylon/3% spandex.
Yarn Number: (1) 32/2 to 36/2 metric (18.9/2 to 21.2/2 English)
spun viscose rayon.
(2) 163.7 to152.4 metric (55 to 59 denier)/10 filament nylon.
(3) 43.3 to 42.9 metric (208 to 210 denier) spandex wrapped around
132 to 125 metric (68 to 72 denier) nylon.
Machine Gauge: 18.
Number of Bars: 16.
Weight: 0.23 kg/m2 (0.659 linear yards/lb), plus or minus 5%.
Width: Not less than 137 centimeters (54 inches) cuttable for piece
dyed goods; not less than 147.32 centimeters (58 inches) for printed
goods.
Finish: (Piece) dyed; printed.
Note: This fabric has a unique ``blistered'' face requiring each
of the constituent yarns to be fed separately, with small, regular
open-work interstices, representing about 15% of the total surface
area.
(15) Certain cotton/nylon woven fabric, of the specifications
detailed below, classified in the indicated subheading of the HTS, for
use in apparel articles:
HTS Subheadings: 5211.31.0020.
Fiber Content: 75% cotton/25% nylon.
Yarn Number: Warp yarn size: 35.5/1 metric cotton; filling yarn
size: 35.5/1 metric (slub yarn of cotton alternating with a 45 metric
filament nylon) 41 warp ends/cm; 22 filling picks/cm.
Weight: 223 g/m2.
Width: 147 centimeters.
Weave Type: Plain.
Finish: (Piece) dyed.
(Variance allowance of up to three percent for yarn size, thread
count, fabric weight, and fabric width for the above fabric.)
(16) Certain polyester/nylon woven corduroy fabric, of the
specifications detailed below, classified in the indicated subheading
of the HTS, for use in apparel articles:
HTS Subheading: 5801.32.
Fiber Content: 86% polyester/14% nylon.
Yarn Number: Warp yarn size: 60 metric filament polyester; filling
yarn size: 60 metric filament polyester and a 56 metric filament nylon;
28 warp ends/cm; 63 filling picks/cm.
Weight: 250 g/m2.
Width: 150 centimeters.
Weave Type: Corduroy--3 wales/centimeter.
Finish: (Piece) dyed.
(Variance allowance of up to three percent for yarn size, thread
count, fabric weight, and fabric width for the above fabric.)
(17) Certain 2-way stretch woven polyester, rayon, spandex fabric,
of the specifications detailed below, classified
[[Page 6173]]
in the indicated subheading of the HTS, for use in apparel articles:
HTS Subheading: 5515.11.00.
Fiber Content: 50% to 77% polyester/18% to 47% rayon/3% to 8%
spandex (for fabrics comprising single yarns in the warp, the polyester
content may be higher).
Staple Length: 4.44 to 6.99 centimeters (1.75 to 2.75 inches).
Yarn Number: (1) Warp and filling: plied polyester/rayon staple of
various yarn sizes, combined with spandex filament of various deniers.
(2) Warp and filling: 34/1 (English 20/1) or finer polyester/rayon
staple, combined with spandex filament of various deniers.
(3) Warp: 34/1 (English 20/1) or finer polyester/rayon staple, or
plied polyester/rayon staple of various yarn sizes, combined with
spandex filament of various deniers.
Filling: Singles or plied polyester filament of various yarn sizes,
combined with spandex filament of various deniers.
Note: The designation ``34/1 (English 20/1) or finer'' describes
a range of yarn specifications for yarn in its greige condition
before dyeing and finishing of the yarn (if applicable) and before
weaving, dyeing and finishing of the fabric. It is intended as a
specification to be followed by the mill in sourcing yarn used to
produce the fabric. Dyeing, finishing and weaving can alter the
characteristic of the yarn as it appears in the finished fabric.
This specification therefore includes yarns appearing in the
finished fabric as coarser than 34/1 (English 20/1) provided that
the coarser appearance occurs solely as the result of such
processes.
Thread Count: 23 to 51 warp ends by 16 to 39 filling picks per
centimeter (60 to 130 warp ends by 40 to 100 filling picks per inch).
Weave Type: Various (including plain and twill).
Weight: Fabrics comprising single yarns in the warp, 200 to 290 g/
m2 (5.9 to 8.6 oz/square yard).
--Fabrics comprising plied yarns in the warp, 200 to 310 g/m2 (5.9 to
9.1 oz/square yard).
Width: 121 to 165 centimeters (English 48 to 65 inches).
Finish: Dyed and of yarns of different colors.
(18) Certain herringbone stretch woven fabrics of polyester, rayon
and spandex yarns, of the specifications detailed below, classified in
the indicated subheading of the HTS, for use in apparel articles:
HTS Subheading: 5515.11.0040.
Fiber Content: 61% to 67% polyester/30% to 36% rayon/1% to 6%
spandex.
Staple Length (where applicable): 3.18 to 4.44 centimeters (1.25 to
1.75 inches).
Yarn Number: Warp: Plied polyester/rayon staple of any yarn size;
filling: plied polyester/rayon staple of any yarn size combined with
spandex filament of any denier.
Thread Count: 36 to 40 warp ends by 22 to 28 filling picks per
centimeter (English 91 to 102 warp ends by 56 to 70 filling picks per
inch).
Weave Type: Twill.
Weight: 225 to 250 g/m2 (English 6 to 7.4 oz/square yard).
Width: 144 to 155 centimeters (English 54 to 58 inches).
Finish: (Piece) dyed.
(19) Certain 100% cotton woven indigo dyed fabrics (fabric
1), of the specifications detailed below, classified in the
indicated subheadings of the HTS, for use in apparel articles:
HTS Subheadings: 5208.39.6090 and 5208.39.8090.
Fiber Content: 100% combed cotton.
Yarn Number: Metric: 64/2 + 64/2 x 64/2 + 64/2 to 71/2 + 71/2 x 71/
2 + 71/2 (English: 38/2 + 38/2 x 38/2 + 38/2 to 42/2 + 42/2 x 42/2 +
42/2).
Construction: Woven with a dobby attachment.
Weight: 150-166 g/m2 (4.4-4.9 oz/square yard).
Width: Metric: 130-144 centimeters (51-57 inches).
Finish: (Piece) dyed with synthetic indigo, color index no: 73000.
(20) Certain 100% cotton woven indigo dyed fabrics (fabric
2), of the specifications detailed below, classified in the
indicated subheading of the HTS, for use in apparel articles:
HTS Subheading: 5208.39.8090.
Fiber Content: 100% combed cotton.
Yarn Number: Metric: 97/2 x 64/1 to 107/2 x + 71/1 (English: 57/2 x
38/1 to 63/2 x 42/1).
Construction: Woven with a dobby attachment.
Weight: 124-137 g/m2 (3.7-4.0 oz/square yard).
Width: 135-149 centimeters (53-59 inches).
Finish: (Piece) dyed with synthetic indigo, color index no: 73000.
(21) Certain 100% cotton woven indigo dyed fabrics (fabric
3), of the specifications detailed below, classified in the
indicated subheadings of the HTS, for use in apparel articles:
HTS Subheadings: 5208.39.6090 and 5208.39.8090.
Fiber Content: 100% combed cotton.
Yarn Number: Metric: 64/2 + 64/1 x 64/1 to 71/2 + 71/1 x 71/2
(English: 38/2 + 38/1 x 38/1 to 42/2 + 42/1 x 42/1).
Construction: Woven with a dobby attachment.
Weight: 135-149 g/m2 (4.0-4.4 oz/square yard).
Width: 135-149 centimeters (53-59 inches).
Finish: (Piece) dyed with synthetic indigo, color index no: 73000.
CITA is soliciting public comments regarding this request,
particularly with respect to whether the fabrics described above can be
supplied by the domestic industry in commercial quantities in a timely
manner. Comments must be received no later than March 10, 2010.
Interested persons are invited to submit six copies of such comments or
information to the Chairman, Committee for the Implementation of
Textile Agreements, Room 3001, U.S. Department of Commerce, 14th and
Constitution Avenue, NW., Washington, DC 20230.
CITA will protect any business confidential information that is
marked business confidential from disclosure to the full extent
permitted by law. CITA will make available to the public non-
confidential versions of the request and non-confidential versions of
any public comments received with respect to a request in Room 3001 in
the Herbert Hoover Building, 14th and Constitution Avenue, NW.,
Washington, DC 20230. Persons submitting comments on a request are
encouraged to include a non-confidential version and a non-confidential
summary.
Kim Glas,
Chairman, Committee for the Implementation of Textile Agreements.
[FR Doc. 2010-2693 Filed 2-5-10; 8:45 am]
BILLING CODE 3510-DS-P