[Federal Register Volume 74, Number 201 (Tuesday, October 20, 2009)]
[Notices]
[Pages 53763-53764]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E9-25154]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Employment and Training Administration

[TA-W-61,554]


Semitool, Incorporated Including On-Leased Employees From LC 
Staffing, Express Personnel and Workplace, Inc. Kalispell, MT; 
Including Employees in Support of Semitool, Incorporated, Kalispell, MT 
Working at Various Locations in the Following States: TA-W-61,554C 
Arizona et al.; Amended Certification Regarding Eligibility To Apply 
for Worker Adjustment Assistance and Alternative Trade Adjustment 
Assistance

[[Page 53764]]



TA-W-61,554C Arizona............................  TA-W-63,996D
                                                   California.
TA-W-61,554E Florida............................  TA-W-61,554F Maine.
TA-W-61,554G North Carolina.....................  TA-W-61,554H New
                                                   Jersey.
TA-W-61,554I New York...........................  TA-W-61,554J Oregon.
TA-W-61,554K Pennsylvania.......................  TA-W-61,554L Texas.
TA-W-61,554M Utah...............................  TA-W-61,554N Virginia.
TA-W-61,554O Washington.........................  TA-W-61,554P
                                                   Wisconsin.
And TA-W-61,554Q Minnesota......................
 

    In accordance with Section 223 of the Trade Act of 1974 (19 U.S.C. 
2273), and Section 246 of the Trade Act of 1974 (26 U.S.C. 2813), as 
amended, the Department of Labor issued a Certification of Eligibility 
to Apply for Worker Adjustment Assistance and Alternative Trade 
Adjustment Assistance on July 16, 2007, applicable to workers of 
Semitool, Incorporated, including on-site leased workers from LC 
Staffing, Express Personnel, and Workplace, Incorporated, Kalispell, 
Montana. The notice was published in the Federal Register on August 2, 
2007 (72 FR 42435). The notice was amended on March 26, 2009 to include 
employees of the subject firm working at various locations at the above 
mentioned states. The notice was published in the Federal Register on 
April 7, 2009 (74 FR 15753).
    At the request of the State agency, the Department reviewed the 
certification for workers of the subject firm. The workers are engaged 
in the production of semiconductor processing equipment.
    New information shows that a worker separation has occurred 
involving an employee, (John Polinski) who provided various services 
supporting the Kalispell, Montana location of Semitool, Incorporated 
working out of the state of Minnesota.
    Based on these findings, the Department is amending this 
certification to include an employee of the Kalispell, Montana facility 
of Semitool, Incorporated working out of the state of Minnesota.
    The intent of the Department's certification is to include all 
workers of Semitool, Incorporated, Kalispell, Montana who were 
adversely affected by increased imports of semiconductor processing 
equipment.
    The amended notice applicable to TA-W-61,554 is hereby issued as 
follows:

    All workers of Semitool, Incorporated, including on-site leased 
workers from LC Staffing, Express Personnel and Workplace, 
Incorporated, Kalispell, Montana, including employees in support of 
Semitool, Incorporated, Kalispell, Montana working at various 
locations in the following states: Arizona (TA-W-61,554C), 
California (TA-W-61,554D), Florida (TA-W-61,554E), Maine (TA-W-
61,554F), North Carolina (TA-W-61,554G), New Jersey (TA-W-61,554H), 
New York (TA-W-61,554I), Oregon (TA-W-61,554J), Pennsylvania (TA-W-
61,554K), Texas (TA-W-61,554L), Utah (TA-W-61,554M, Virginia (TA-W-
61,554N), Washington (TA-W-61,554O), Wisconsin (TA-W-61,554P) and 
Minnesota (TA-W-61,554Q), who became totally or partially separated 
from employment on or after May 18, 2006, through July 16, 2009, are 
eligible to apply for adjustment assistance under Section 223 of the 
Trade Act of 1974, and are also eligible to apply for alternative 
trade adjustment assistance under Section 246 of the Trade Act of 
1974.

    Signed at Washington, DC, this 6th day of October 2009.
Elliott S. Kushner,
Certifying Officer, Division of Trade Adjustment Assistance.
[FR Doc. E9-25154 Filed 10-19-09; 8:45 am]
BILLING CODE 4510-FN-P