[Federal Register Volume 74, Number 193 (Wednesday, October 7, 2009)]
[Notices]
[Pages 51586-51592]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E9-23934]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2009-0741; FRL-8793-7]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from July 1, 2009 through August 14, 2009, consists of the PMNs
pending or expired, and the notices of commencement to manufacture a
new chemical that the Agency has received under TSCA section 5 during
this time period.
DATES: Comments identified by the specific PMN number or TME number,
[[Page 51587]]
must be received on or before November 6, 2009.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2009-0741, by one of the following methods:
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID Number EPA-HQ-OPPT-2009-0741. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the DCO's normal hours of operation, and special
arrangements should be made for deliveries of boxed information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2009-0741. EPA's policy is that all comments received will be included
in the docket without change and may be made available on-line at
http://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' system,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov,
your e-mail address will be automatically captured and included as part
of the comment that is placed in the docket and made available on the
Internet. If you submit an electronic comment, EPA recommends that you
include your name and other contact information in the body of your
comment and with any disk or CD-ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses. For additional
information about EPA's public docket, visit the EPA Docket Center
homepage at http://www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket are listed in the docket index
available in regulations.gov. To access the electronic docket, go to
http://www.regulations.gov, select ``Advanced Search,'' then ``Docket
Search.'' Insert the docket ID number where indicated and select the
``Submit'' button. Follow the instructions on the regulations.gov
website to view the docket index or access available documents.
Although listed in the index, some information is not publicly
available, e.g., CBI or other information whose disclosure is
restricted by statute. Certain other material, such as copyrighted
material, will be publicly available only in hard copy. Publicly
available docket materials are available electronically at http://www.regulations.gov, or, if only available in hard copy, at the OPPT
Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at
Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC.
The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding Federal holidays. The telephone
number of the EPA/DC Public Reading Room is (202) 566-1744, and the
telephone number for the OPPT Docket is (202) 566-0280. Docket visitors
are required to show photographic identification, pass through a metal
detector, and sign the EPA visitor log. All visitor bags are processed
through an X-ray machine and subject to search. Visitors will be
provided an EPA/DC badge that must be visible at all times in the
building and returned upon departure.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: [email protected].
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM
that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and
then identify electronically within the disk or CD-ROM the specific
information that is claimed as CBI. In addition to one complete version
of the comment that includes information claimed as CBI, a copy of the
comment that does not contain the information claimed as CBI must be
submitted for inclusion in the public docket. Information so marked
will not be disclosed except in accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at your estimate in sufficient detail to allow for it to be
reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use
of profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or
[[Page 51588]]
an application for a TME and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from July 1, 2009 through August 14, 2009, consists of the PMNs
pending or expired, and the notices of commencement to manufacture a
new chemical that the Agency has received under TSCA section 5 during
this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs pending or expired, and the
notices of commencement to manufacture a new chemical that the Agency
has received under TSCA section 5 during this time period. If you are
interested in information that is not included in the following tables,
you may contact EPA as described in Unit I. to access additional non-
CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 100 Premanufacture Notices Received From: 7/1/09 to 8/14/09
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-09-0416 06/11/09 09/08/09 CBI (G) a polymer in an (G) 3'H-cyclopropacal-
encapsulated bopolycle-
photovultaic module 3'butanoic acid. 3'-
phenyl-, methyl
ester; 3'H-
cyclopropacarbopolyc
yle-3' butanoic
acid, 3'- phenyl-,
methyl ester
P-09-0470 06/30/09 09/27/09 The Dow Chemical (G) Gas treatment (G) Sulfo-substituted
Company agent, contained use metal
heteropolycycle-
mixed sodium,
alkanolamine salt
P-09-0471 06/30/09 09/27/09 The Dow Chemical (G) Gas treatment (G) Sulfo-substituted
Company agent, contained use metal
heteropolycycle-
mixed sodium,
alkanolamine salt
P-09-0472 06/30/09 09/27/09 The Dow Chemical (G) Gas treatment (G) Sulfo-substituted
Company agent, contained use metal
heteropolycycle-
mixed sodium,
alkanolamine salt
P-09-0473 06/30/09 09/27/09 PPG Industries, Inc. (G) Component of a (G) Polyurea
coating isocyanate
P-09-0474 06/30/09 09/27/09 PPG Industries, Inc. (G) Component of a (G) Polyurea
coating isocyanate
P-09-0475 06/30/09 09/27/09 PPG Industries, Inc. (G) Component of a (G) Polyurea
coating isocyanate
P-09-0476 06/30/09 09/27/09 PPG Industries, Inc. (G) Component of a (G) Polyurea
coating isocyanate
P-09-0477 07/01/09 09/28/09 3M Company (G) Fluorinated (G) Fluoroalkyl
intermediate sulfonamide
P-09-0478 07/01/09 09/28/09 PPG Industries, Inc. (G) Component of a (G) Modified polyol
coating
P-09-0479 06/25/09 09/22/09 Lamberti USA, Inc. (S) Co-photoinitiator (S) Benzoic acid, 4-
for ultra violet- (dimethylamino)-,
curable pigmentated 1,1'-
inks; co- [(methylimino)di-2,
photoinitiator for 1-ethanedyl] ester
photoresists,
optical fibers and
printed plates; co-
photoinitiator for
ultra violet-curable
coatings; co-
photoinitiator for
ultra violet-curable
adhesives and other
coatings; non
dispersive use
P-09-0480 06/25/09 09/22/09 Lamberti USA, Inc. (S) Co-photoinitiator (S) 1-propanone, 1,1'
for ultra violet- (oxydi-4, 1-
curable pigmentated phenylene) bis [2-
inks; co- hydroxy-2-methyl-
photoinitiator for
photoresists,
optical fibers and
printed plates; co-
photoinitiator for
ultra violet-curable
coatings; co-
photoinitiator for
ultra violet-curable
adhesives and other
coatings; non
dispersive use
P-09-0481 07/01/09 09/28/09 3M Company (S) Protector for (G) Fluorinated
textile polymer
P-09-0482 07/01/09 09/28/09 CBI (S) Dispersed rosin (G) Rosin, maleic
size for sizing of anhydride, amine
paper and paperboard resin
P-09-0483 07/02/09 09/29/09 CBI (G) Additive, open, (G) Polyether
non-dispersive use modified polyamine
P-09-0484 07/02/09 09/29/09 CBI (G) Additive, open, (G) Polyether
non-dispersive use modified polyamine
P-09-0485 07/01/09 09/28/09 3M Company (G) Fluorinated (G) Fluorinated
intermediate sulfonamide alcohol
P-09-0486 07/02/09 09/29/09 CBI (G) Lubricant (G) Polyalkenyl, N,N'-
additive bistriazole
P-09-0487 07/02/09 09/29/09 CBI (G) Emulsifier (G) Organic phosphate
esters
P-09-0488 07/02/09 09/29/09 CBI (G) Component of (G) Substituted
consumer product acrylic acid maleic
anhydride copolymer
P-09-0489 07/02/09 09/29/09 Firmenich Inc. (S) Aroma for use in (S) Definition:
fragrance mixtures, Extractives and
which in turn are their physically
used in perfumes, modified
soaps, cleansers, derivatives.
etc. Periploca sepium.
P-09-0490 07/06/09 10/03/09 Firmenich Inc. (S) Aroma for use in (S) 2H-1,5-
fragrance mixtures, benzodioxepin-3 (4h)-
which in turn are one, 7-(1-
used in perfumes, methylethyl)-
soaps, cleansers,
etc.
[[Page 51589]]
P-09-0491 07/06/09 10/03/09 Forests Pacific (S) Fragrance (S) Definition:
Biochemicals ingredient Extractives and
Corporation their physically
modified
derivatives.
callitropsis
nootkatensis. Oil,
Callitropsis
nootkatensis
P-09-0492 07/08/09 10/05/09 CBI (G) Sealant; adhesive (G) Isocyanate
polymer, amine
blocked
P-09-0493 07/08/09 10/05/09 CBI (G) Sealant; adhesive (G) Isocyanate
polymer, amine
blocked
P-09-0494 07/08/09 10/05/09 CBI (G) Sealant; adhesive (G) Isocyanate
polymer, amine
blocked
P-09-0495 07/08/09 10/05/09 CBI (G) Sealant; adhesive (G) Isocyanate
polymer, amine
blocked
P-09-0496 07/08/09 10/05/09 CBI (G) Sealant; adhesive (G) Isocyanate
polymer, amine
blocked
P-09-0497 07/09/09 10/06/09 Nanocyl Corporation, (S) Additivies to (S) Short tangled
a Georgia improve electrical, multi-wall carbon
Corporation thermal and/or nanotubes obtained
mechanical by catalytical
properties of chemical vapour
thermoplastic, deposition
thermoset and
coating materials
P-09-0498 07/10/09 10/07/09 CBI (S) Part of a two- (G) Aromatic
component gravure dicarboxylic acid,
ink and overprinting polymer with
lacquer system cycloaliphatic
diamine, 2-
(chloromethyl)oxiran
e, alkyldioic acid
and an aryl diphenol
P-09-0499 07/13/09 10/10/09 CBI (S) Raw material used (G) Aromatic
in fuel cell polyether polymer
applications.
P-09-0500 07/14/09 10/11/09 CBI (S) Fluorescent (G) 1,4-
whitening agent for benzenedisulfonic
uncoated paper acid, 2,2'-[1,2-
(formulation 1). ethenediylbis[(3-
Fluorescent sulfo-4,1-
whitening agent for phenylene)imino[6-
coated paper [bis(alkanol)amino]-
(formulation 2). 1,3,5-triazine-4,2-
diyl]imino]]bis-,
hexasodium salt
P-09-0501 07/14/09 10/11/09 CBI (G) Hole injection (G)
layer in a polymeric Hetromonocyclic[3,4-
photovoltaic module. b]thiophene,
homopolymer, 2-[1-
difluoro[(1,2,2-
trifluoroethenyl)oxy
]methyl]-1,2,2,2-
tetrafluoroethoxy]-
1,1,2,2-
tetrafluoroethyoxy]-
1,1,2,2-
tetrafluoroethanesul
fonic acid-
tetrafluoroethylene
polymer-doped
P-09-0502 07/14/09 10/11/09 CBI (G) Open, non- (G) Blocked aromatic
dispersive use isocyanate
P-09-0503 07/15/09 10/12/09 CBI (G) Polymerization (G) Fluoromaleate
feedstock
P-09-0504 07/15/09 10/12/09 CBI (G) Carpet treatment (G) Fluoroalkyl
additive acrylate copolymer
P-09-0505 07/15/09 10/12/09 CBI (G) Coatings (G) Aliphatic
urethane acrylate
P-09-0506 07/14/09 10/11/09 Coim USA Inc. (S) Form insulation (S) Hexanedioic acid,
board polymer with
oxybis[propanol] and
1,2,3,-propanetriol
P-09-0507 07/15/09 10/12/09 Essential Industries (S) Raw material for (G) Aliphatic
industrial coating polyurethane
dispersion
P-09-0508 07/15/09 10/12/09 Essential Industries (S) Raw material for (G) Aliphatic
industrial coating polyurethane
dispersion
P-09-0509 07/15/09 10/12/09 Essential Industries (S) Raw material for (G) Aliphatic
industrial coating polyurethane
dispersion
P-09-0510 07/16/09 10/13/09 CBI (G) Paper treatment (G) Fluoroalkyl
additive acrylate copolymer
P-09-0511 07/16/09 10/13/09 CBI (G) Paper treatment (G) Fluoroalkyl
additive acrylate copolymer
P-09-0512 07/16/09 10/13/09 Gelest, Inc. (S) Automotive part (S) Silane,
coating; research dichlorodimethyl-,
homopolymer
P-09-0513 07/17/09 10/14/09 CBI (S) Fixative for (G) Aminoalkyl
cellulose based polymer with
substrates in paper (chloromethyl)oxiran
manufacturing e
industry
P-09-0514 07/17/09 10/14/09 Coim USA Inc. (S) Packaging (S) Hexanedioic acid,
adhesives polymer with 2-
methyl-1,3-
propanediol
P-09-0515 07/16/09 10/13/09 Kuraray America, Inc. (S) Lubricants; (S) 2,5-furandione,
dispersants; polymer with 2-
adhesives methyl-1-propene,
amide, ammonium salt
P-09-0516 07/20/09 10/17/09 CBI (S) Part of two- (G) Fatty acids,
component gravure C16 18 and C18-
inks and unsaturated, polymer
overprinting with alkyldioic
lacquers acid,
cycloalkylamine,
aromatic diol, C18-
unsaturated fatty
acid dimers,
epichlorohydrin, an
aromatic acid and
triethylenetetramine
P-09-0517 07/21/09 10/18/09 Essential Industries (S) Raw material for (G) Aliphatic
industrial coating polyurethane
dispersion
P-09-0518 07/22/09 10/19/09 CBI (G) Paper processing (G) Furandione
aid derivative
P-09-0519 07/24/09 10/21/09 CBI (G) Latent hardener (G) Aromatic bis-
curing agent for one oxalolidine
and two component
polyurethane
products
[[Page 51590]]
P-09-0520 07/24/09 10/21/09 CBI (G) Coating (G) Silane polymer
mixture
P-09-0521 07/27/09 10/24/09 CBI (G) Functional fluid, (G) Dialkyl
plasticiser, solvent imidazolium salt
P-09-0522 07/27/09 10/24/09 The Dow Chemical (G) Surfactant (G) Ethoxylated,
Company butoxylated alcohol
P-09-0523 07/27/09 10/24/09 The Dow Chemical (G) Surfactant (G) Ethoxylated,
Company butoxylated alcohol
P-09-0524 07/29/09 10/26/09 CBI (G) Chemical (G) Aromatic
intermediate polyester
P-09-0525 07/29/09 10/26/09 Huntsman Corporation (G) Coatings (G) Hydroxyamino aryl
amine
P-09-0526 07/28/09 10/25/09 Huntsman Corporation (G) Coatings (G) Hydroxyamino aryl
triamine
P-09-0527 07/28/09 10/25/09 CBI (S) Hardener for two- (G) Fatty acids,
part coating systems polymer with an
aromatic diol, C18-
unsaturated fatty
acids dimers,
epichlorohydrin and
triethylenetetramine
P-09-0528 07/30/09 10/27/09 CBI (G) Rubber additive (G) Vinylsilane
P-09-0529 07/30/09 10/27/09 CBI (G) Open, non- (G) Diacid, half
dispersive use. ester
P-09-0530 07/30/09 10/27/09 Forbo Adhesives, LLC (G) Hot melt (G) Isocyanate
polyurethane functional polyester
adhesive polyether urethane
polymer
P-09-0531 07/30/09 10/27/09 CBI (G) Acrylic pressure (G) Acrylic solution
sensitive adhesive polymer
P-09-0532 07/30/09 10/27/09 CBI (G) Sealant (G) Bisurea compound
P-09-0533 07/27/09 10/24/09 Wacker Chemical (S) Adhesion promoter (S) Siloxanes and
Corporation silicones, me
hydrogen, me 3-(2-
oxiranylmethoxy)prop
yl, ethoxy- and
methoxy-terminated
P-09-0534 07/29/09 10/26/09 CBI (G) Open, non- (G) Carbamic acid,
dispersive use (methylenedicyclohex
(water-borne anediyl)bis-mixed
coatings systems) diesters with
polyethylene glycol
and polyethylene
glycol mono ethers
P-09-0535 08/03/09 10/31/09 CBI (S) Synthetic (G) Aromatic
intermediate hydrocarbon
P-09-0536 07/29/09 10/26/09 CBI (G) Open, non- (G) Carbamic acid,
dispersive use (methylenedicyclohex
(water-borne anediyl)bis-mixed
coatings systems) diesters with
unsaturated
alcohols,
polyethylene glycol
and polyethylene
glycol mono ethers
P-09-0537 07/29/09 10/26/09 CBI (G) Open, non- (G) Polyethylene
dispersive use glycol, alpha,
(water-borne alpha', alpha''-
coatings systems) propanetrilmonoester
s with
[[[carboxyaminitrime
thylcyclohexyl]methy
l]amino]carbonyl]-
octadecenyloxy)polye
thylene glycol
P-09-0538 07/29/09 10/26/09 CBI (G) Open- non- (G) Carbamic acid,
dispersive use (methylenedicyclohex
(water-borne anediyl)bis-mixed
coatings systems) diesters with
isoalcohols,
polyethylene glycol
and polyethylene
glycol mono ethers
P-09-0539 07/29/09 10/26/09 CBI (G) Open, non- (G) Carbamic acid,
dispersive use (trimethylhexanediyl
(water-borne )bis-mixed diesters
coatings systems) with unsaturated
alcohols,
isoalcohols and
polyethylene glycol
P-09-0540 08/03/09 10/31/09 CBI (S) Synthetic (G) Halogenated
intermediate aromatic hydrocarbon
P-09-0541 08/03/09 10/31/09 CBI (S) A semiconductor (G) Aromatic
host material for heterocycle
oled devices
P-09-0542 08/03/09 10/31/09 CBI (S) Uses per FFDCA: (S) 3-nonen-1-ol, 1-
Food / flavors; acetate, (3Z)-
fragrance material
in cosmetics; Uses
per TSCA: Fragrance
uses; scented
papers, detergents,
candles, etc.
P-09-0543 08/05/09 11/02/09 CBI (G) Coatings (G) Aromatic urethane
acrylate
P-09-0544 08/04/09 11/01/09 CBI (G) Coating raw (G)
material Polyalkyleneglycol,
reaction products
with hydroxyalkyl
acrylate,
dihydroxyalkyl
alkanoic acid,
sodium-aminoalkyl-
alaninate, sodium
salt
P-09-0545 08/04/09 11/01/09 Dic International (G) Additive for (G) Fluorinated
(USA) LLC lubricating oil acrylic ester
copolymer (telomer
type)
P-09-0546 08/04/09 11/01/09 CBI (G) Intermediate (G) Formaldehyde
reaction products
with aromatic amine
[[Page 51591]]
P-09-0547 08/04/09 11/01/09 CBI (G) Lubricant (G) Formaldehyde,
additive reaction products
with aromatic amine
and alkenyl
anhydride
P-09-0548 08/07/09 11/04/09 CBI (G) Intermediate in (G) Alkyl thiol,
the production of a manufacturer of, by-
commercial product products from,
distant lights
P-09-0549 08/07/09 11/04/09 CBI (G) Intermediate in (G) Alkyl thiol,
the production of a manufacturer of, by-
commercial product products from,
distant residues
P-09-0550 08/07/09 11/04/09 CBI (G) Intermediate in (G) Alkyl thiol,
the production of a manufacturer of, by-
commercial product products from,
distant lights
P-09-0551 08/07/09 11/04/09 CBI (G) Intermediate in (G) Alkyl thiol,
the production of a manufacturer of, by-
commercial product products from,
distant residues
P-09-0552 08/10/09 11/07/09 Henkel Corporation (S) A site limited (S) Benzene, 1,3-
starting material in bis(1-chloro-1-
novel polymer methylethyl)-
synthesis reactions
P-09-0553 08/10/09 11/07/09 CBI (G) Flame retardant (G) Metal phosphinate
polymer additive
P-09-0554 08/10/09 11/07/09 Dynamic Fuels LLC c/o (S) Renewable diesel (S) Fuels, diesel C8-
Syntroleum fuel to be blended C18 alkane branched
Corporation with petroleum- and linear
derived diesel definition: A
complex combination
of hydrocarbons
obtained by the
hydrodeoxygenation
and catalytic
hydroisomerization
of animal fats and
vegetable oils
followed by
distillative
fractionation. It
consists
predominantly of
branched and linear
paraffins having
carbon numbers in
the range of C9 to
C18 and boiling in
the range of 179c to
309c (354.2f to
588.3f) fuels,
diesel, C9 18-alkane
branched and linear
P-09-0555 08/11/09 11/08/09 CBI (G) Dispersing resin (G) Acrylate, polymer
with aromatic vinyl
monomer and
acrylates
P-09-0556 08/10/09 11/07/09 CBI (G) Monomers for (G) Modified ketal
polymers and oligo
ester; additive for
cleaning products
and / or plastics
P-09-0557 08/10/09 11/07/09 CBI (G) Monomers for (G) Modified ketal
polymers and oligo
ester; additive for
cleaning products
and / or plastics
P-09-0558 08/10/09 11/07/09 CBI (G) Additive for (G) Modified ketal
cleaning products
and / or plastics
P-09-0559 08/11/09 11/08/09 CBI (G) Treating agent (G) Alkoxysilane
P-09-0560 08/11/09 11/08/09 CBI (S) Intermediate (G)
Chloroalkoxysilane
P-09-0561 08/11/09 11/08/09 CBI (S) Silane coupling (G) Alkoxysilane
agent
P-09-0562 08/12/09 11/09/09 CBI (G) Oilfield polymer (G) Polymer of
acrylamido alkyl
propane sulfonic
acid sodium salt and
two acrylic
monomers.
P-09-0563 08/12/09 11/09/09 Interfacial solutions (S) Interior building (G) Modified (poly)
materials; injection lactic acid
molded goods -
electronics
P-09-0564 08/10/09 11/07/09 CBI (G) Lamination (G) Polyurethane
adhesive prepolymer
P-09-0565 08/11/09 11/08/09 CBI (G) Chemical for use (G) Hydrophobically
in paper making modified cationic
polyamide resin
P-09-0566 08/13/09 11/10/09 CBI (G) Open, non- (G) Polysiloxane
dispersive use. epoxy polymer
P-09-0567 08/13/09 11/10/09 Angus Chemical (G) Radical scavenger (G) Hydroxylamine
Company, a derivative
subsidiary of the
Dow Chemical Company
P-09-0568 08/14/09 11/11/09 CBI (S) Aerospace (G) Formaldehyde,
structural adhesive polymer with 2-
filler / syntatic (chloromethyl)oxiran
system e, polyoxyalkane,
and phenols
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
[[Page 51592]]
II. 43 Notices of Commencement From: 7/1/09 to 8/14/09
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-05-0668 07/23/09 07/03/09 (G) Maleic anhydride,
adipic acid, propylene
glycol, polyglycol
copolymer
P-06-0325 07/22/09 06/19/09 (G) Fatty acid polymer
with aliphatic diol and
aromatic diacid
P-06-0560 07/16/09 06/23/09 (G) Fluoroalkyl
methacrylate copolymer
P-07-0015 07/29/09 03/16/09 (G) Substituted
naphthalenedisulfonic
acid, substituted amino
azo]-, sodium salt (same
generic name for both
isomers)
P-07-0016 07/06/09 06/08/09 (G) Hydrolyzed wheat
silicone copolymer
P-08-0135 07/14/09 07/06/09 (G) Silylated acrylic
resin
P-08-0137 07/28/09 06/22/09 (G) MDI polyester
prepolymer
P-08-0206 07/24/09 06/29/09 (G) Styrene/acrylate
copolymer (carboxylated)
P-08-0316 07/15/09 07/08/09 (G) Polyether
polyphosphate ester
P-08-0317 07/15/09 07/08/09 (G) Polyether polyalcohol
derivative
P-08-0393 07/30/09 07/15/09 (G) Urethane resin
P-08-0410 07/28/09 06/25/09 (G) Glycidyl methacrylate
alkyl (meth) acrylate
copolymer
P-08-0476 07/21/09 09/23/08 (G) Amine functional
acrylic polymer
P-08-0504 07/14/09 06/15/09 (G) Formaldehyde, polymer
with amine and a phenol
P-08-0505 07/08/09 06/19/09 (G) Copolymer of
substituted
propanesulfonic acid,
maleate of ethylene oxide-
propylene oxide
P-08-0546 07/20/09 06/30/09 (S) 1,3-butanediol,
manufacturer of, by-
products from, distant
residues
P-08-0682 07/15/09 03/16/09 (G) Ethoxylated maleated
triglyceride polymer
P-08-0751 07/14/09 07/04/09 (G) Ester diol
P-08-0753 07/14/09 07/04/09 (G) Organosilane
derivative
P-09-0030 07/16/09 06/16/09 (G) Polyester acrylate
P-09-0043 07/14/09 06/16/09 (G) Benzenesulfonic acid,
disodium salt
P-09-0112 07/28/09 07/06/09 (G) Bis-A-epoxy resin -
CTBN adduct
P-09-0122 07/23/09 07/19/09 (G) Silicone modified
polycarbonate
P-09-0177 07/16/09 06/21/09 (G) Aliphatic urethane
acrylate
P-09-0214 07/22/09 07/08/09 (G) Styrene-methacrylate
copolymer
P-09-0224 07/07/09 06/08/09 (G) Isocyanate terminated
urethane polymer
P-09-0284 07/08/09 06/30/09 (G) Unsaturated polyester
resin
P-09-0297 07/24/09 07/09/09 (G) Copolymer of acrylic
acid and methacrylic acid
esters, and
vinylcaprolactam
P-05-0351 08/05/09 07/23/09 (G) SMA imide polyquat
salt
P-05-0613 08/14/09 07/17/09 (G) Bisphenol S mono ester
P-06-0340 08/12/09 07/28/09 (S) Hexanedioic acid,
potassium salt
P-07-0594 08/07/09 07/18/09 (G) N,N,N-
trialkylalkylamine
chloride
P-07-0595 08/07/09 07/18/09 (G) N,N,N-
trialkylalkylamine
acetate
P-08-0089 08/04/09 07/23/09 (G) Fatty acid oils
polymer with aromatic
acid, acrylates, styrene,
polyol and conjugated
anhydrides
P-08-0115 08/05/09 07/13/09 (G) Olefin copolymer
P-09-0062 08/06/09 07/22/09 (G) Alkyl aryl ether
P-09-0132 08/12/09 07/27/09 (G) Alkyl substituted
polyamide
P-09-0170 08/04/09 07/20/09 (G) Isocyanate terminated
polyether polyurethane
P-09-0186 08/05/09 08/02/09 (S) Phenol, polymer with
formaldehyde, bu ether
P-09-0204 08/11/09 07/24/09 (G) Siloxanes and
silicones, di-me,
hydroxyalkyl me,
alkoxylated, polymers
with diisocyanatoalkane,
polyalkylene-glycol
monoallyl ether-blocked
P-09-0236 08/11/09 07/31/09 (S) Alkenes, C20 24
.alpha.-, polymers with
maleic anhydride, C16 18-
alkyl esters
P-98-0673 08/04/09 04/28/08 (G) Alkyl benzene
P-98-0679 08/04/09 04/28/08 (G) Alkyl benzenesulfonic
acid
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: September 24, 2009.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. E9-23934 Filed 10-6-09; 8:45 am]
BILLING CODE 6560-50-S