[Federal Register Volume 74, Number 141 (Friday, July 24, 2009)] [Notices] [Pages 36780-36781] From the Federal Register Online via the Government Publishing Office [www.gpo.gov] [FR Doc No: E9-17689] ======================================================================= ----------------------------------------------------------------------- NUCLEAR REGULATORY COMMISSION [NRC-2009-0323] Draft Regulatory Guide: Issuance, Availability AGENCY: Nuclear Regulatory Commission. ACTION: Notice of Issuance and Availability of Draft Regulatory Guide, DG-3038. ----------------------------------------------------------------------- [[Page 36781]] FOR FURTHER INFORMATION CONTACT: Margie Kotzalas, U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001, telephone: (301) 492- 3202 or e-mail to [email protected]. SUPPLEMENTARY INFORMATION: I. Introduction The U.S. Nuclear Regulatory Commission (NRC) is issuing for public comment a draft guide in the agency's ``Regulatory Guide'' series. This series was developed to describe and make available to the public information and methods that are acceptable to the NRC staff for implementing specific parts of the NRC's regulations, techniques that the staff uses in evaluating specific problems or postulated accidents, and data that the staff needs in its review of applications for permits and licenses. The draft regulatory guide (DG), entitled, ``Standard Format and Content of License Applications for Plutonium Processing and Fuel Fabrication Facilities,'' is temporarily identified by its task number, DG-3038, which should be mentioned in all related correspondence. DG- 3038 is a proposed Revision 1 of Regulatory Guide 3.39, dated January 1976. This guide endorses the standard format and content for safety analysis reports (SARs) and integrated safety analysis (ISA) summaries described in the current version of NUREG-1718, ``Standard Review Plan for the Review of an Application for a Mixed Oxide Fuel Fabrication Facility,'' as a method that the NRC staff finds acceptable for meeting the regulatory requirements. Title 10, of the Code of Federal Regulations, Part 70, ``Domestic Licensing of Special Nuclear Material'' (10 CFR part 70), subpart H, ``Additional Requirements for Certain Licensees Authorized to Possess a Critical Mass of Special Nuclear Material'' identifies risk-informed performance requirements for plutonium processing and fuel fabrication facilities. It requires applicants to complete an ISA and submit an ISA summary and other information to the NRC for approval. II. Further Information The NRC staff is soliciting comments on DG-3038. Comments may be accompanied by relevant information or supporting data and should mention DG-3038 in the subject line. Comments submitted in writing or in electronic form will be made available to the public in their entirety through the NRC's Agencywide Documents Access and Management System (ADAMS). Because your comments will not be edited to remove any identifying or contact information, the NRC cautions you against including any information in your submission that you do not want to be publicly disclosed. The NRC requests that any party soliciting or aggregating comments received from other persons for submission to the NRC inform those persons that the NRC will not edit their comments to remove any identifying or contact information, and therefore, they should not include any information in their comments that they do not want publicly disclosed. You may submit comments by any of the following methods: 1. Mail comments to: Rulemaking and Directives Branch, Division of Administrative Services, Mail Stop: TWB-05-B01M, Office of Administration, U.S. Nuclear Regulatory Commission, Washington, DC 20555-0001. 2. Federal e-Rulemaking Portal: Go to http://www.regulations.gov and search for documents filed under Docket ID [NRC-2009-0323]. Address questions about NRC dockets to Carol Gallagher, 301-492-3668; e-mail [email protected]. 3. Fax comments to: Rulemaking and Directives Branch, Division of Administrative Services, Office of Administration, U.S. Nuclear Regulatory Commission at (301) 492-3446. Requests for technical information about DG-3038 may be directed to the NRC contact, Margie Kotzalas at (301) 492-3202 or e-mail to [email protected]. Comments would be most helpful if received by September 21, 2009. Comments received after that date will be considered if it is practical to do so, but the NRC is able to ensure consideration only for comments received on or before this date. Although a time limit is given, comments and suggestions in connection with items for inclusion in guides currently being developed or improvements in all published guides are encouraged at any time. Electronic copies of DG-3038 are available through the NRC's public Web site under Draft Regulatory Guides in the ``Regulatory Guides'' collection of the NRC's Electronic Reading Room at http://www.nrc.gov/reading-rm/doc-collections/. Electronic copies are also available in ADAMS (http://www.nrc.gov/reading-rm/adams.html), under Accession No. ML091750253. In addition, regulatory guides are available for inspection at the NRC's Public Document Room (PDR) located at 11555 Rockville Pike, Rockville, Maryland. The PDR's mailing address is USNRC PDR, Washington, DC 20555-0001. The PDR can also be reached by telephone at (301) 415-4737 or (800) 397-4205, by fax at (301) 415-3548, and by e- mail to [email protected]. Regulatory guides are not copyrighted, and Commission approval is not required to reproduce them. Dated at Rockville, Maryland, this 16th day of July, 2009. For the Nuclear Regulatory Commission. Mark P. Orr, Acting Chief, Regulatory Guide Development Branch, Division of Engineering, Office of Nuclear Regulatory Research. [FR Doc. E9-17689 Filed 7-23-09; 8:45 am] BILLING CODE 7590-01-P