[Federal Register Volume 74, Number 110 (Wednesday, June 10, 2009)]
[Rules and Regulations]
[Page 27455]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E9-13665]


-----------------------------------------------------------------------

FEDERAL COMMUNICATIONS COMMISSION

47 CFR Part 90

[WP Docket No. 07-100; FCC 09-29]


Amendment of Part 90 of the Commission's Rules; Correction

AGENCY: Federal Communications Commission.

ACTION: Final rule; correction.

-----------------------------------------------------------------------

SUMMARY: The Federal Communications Commission is correcting a final 
rule that appeared in the Federal Register of May 21, 2009, 74 FR 
23799. The document issued a measurement procedure for the maximum 
conducted output power of radio equipment used in the 4.9 GHz frequency 
band.

DATES: Effective June 22, 2009.

FOR FURTHER INFORMATION CONTACT: Thomas Eng, Policy Division, Public 
Safety and Homeland Bureau, Federal Communications Commission, 
Washington, DC 20554, at (202) 418-0019, TTY (202) 418-7233, via e-mail 
at [email protected], or via U.S. Mail at Federal Communications 
Commission, Public Safety and Homeland Security Bureau, 445 12th 
Street, SW., Washington, DC 20554.

SUPPLEMENTARY INFORMATION: The Federal Communications Commission 
published a document in the Federal Register on May 21, 2009, 74 FR 
23799, inadvertently omitting the words ``using instrumentation.'' This 
correction is necessary for clarification. In rule FR Doc. E9-11908 
published May 21, 2009, 74 FR 23799 make the following correction:


Sec.  90.1215  [Corrected]

0
On page 23803, in the third column, in Sec.  90.1215 Power Limits, in 
paragraph (c), the first sentence, ``The maximum conducted output power 
is measured as a conducted emission over any interval of continuous 
transmission calibrated in terms of an RMS-equivalent voltage.'' is 
corrected to read ``The maximum conducted output power is measured as a 
conducted emission over any interval of continuous transmission using 
instrumentation calibrated in terms of an RMS-equivalent voltage.''

Marlene H. Dortch,
Secretary.
[FR Doc. E9-13665 Filed 6-9-09; 8:45 am]
BILLING CODE 6712-01-P