[Federal Register Volume 73, Number 231 (Monday, December 1, 2008)]
[Notices]
[Pages 72846-72848]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E8-28351]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Employment and Training Administration
Notice of Determinations Regarding Eligibility To Apply for
Worker Adjustment Assistance and Alternative Trade Adjustment
Assistance
In accordance with Section 223 of the Trade Act of 1974, as amended
(19 U.S.C. 2273) the Department of Labor herein presents summaries of
determinations regarding eligibility to apply for trade adjustment
assistance for workers (TA-W) number and alternative trade adjustment
assistance (ATAA) by (TA-W) number issued during the period of November
10 through November 14, 2008.
In order for an affirmative determination to be made for workers of
a primary firm and a certification issued regarding eligibility to
apply for worker adjustment assistance, each of the group eligibility
requirements of Section 222(a) of the Act must be met.
I. Section (a)(2)(A) all of the following must be satisfied:
A. A significant number or proportion of the workers in such
workers' firm, or an appropriate subdivision of the firm, have become
totally or partially separated, or are threatened to become totally or
partially separated;
B. The sales or production, or both, of such firm or subdivision
have decreased absolutely; and
C. Increased imports of articles like or directly competitive with
articles produced by such firm or subdivision have contributed
importantly to such workers' separation or threat of separation and to
the decline in sales or production of such firm or subdivision; or
II. Section (a)(2)(B) both of the following must be satisfied:
A. A significant number or proportion of the workers in such
workers' firm, or an appropriate subdivision of the firm, have become
totally or partially separated, or are threatened to become totally or
partially separated;
B. There has been a shift in production by such workers' firm or
subdivision to a foreign country of articles like or directly
competitive with articles which are produced by such firm or
subdivision; and
C. One of the following must be satisfied:
1. The country to which the workers' firm has shifted production of
the articles is a party to a free trade agreement with the United
States;
2. The country to which the workers' firm has shifted production of
the articles to a beneficiary country under the Andean Trade Preference
Act, African Growth and Opportunity Act, or the Caribbean Basin
Economic Recovery Act; or
3. There has been or is likely to be an increase in imports of
articles that are like or directly competitive with articles which are
or were produced by such firm or subdivision.
Also, in order for an affirmative determination to be made for
secondarily affected workers of a firm and a certification issued
regarding eligibility to apply for worker adjustment assistance, each
of the group eligibility requirements of Section 222(b) of the Act must
be met.
(1) Significant number or proportion of the workers in the workers'
firm or an appropriate subdivision of the firm have become totally or
partially separated, or are threatened to become totally or partially
separated;
(2) The workers' firm (or subdivision) is a supplier or downstream
producer to a firm (or subdivision) that employed a group of workers
who received a certification of eligibility to apply for trade
adjustment assistance benefits and such supply or production is related
to the article that was the basis for such certification; and
(3) Either--
(A) The workers' firm is a supplier and the component parts it
supplied for the firm (or subdivision) described in paragraph (2)
accounted for at least 20 percent of the production or sales of the
workers' firm; or
(B) A loss or business by the workers' firm with the firm (or
subdivision) described in paragraph (2) contributed importantly to the
workers' separation or threat of separation.
In order for the Division of Trade Adjustment Assistance to issue a
certification of eligibility to apply for Alternative Trade Adjustment
Assistance (ATAA) for older workers, the group eligibility requirements
of Section 246(a)(3)(A)(ii) of the Trade Act must be met.
1. Whether a significant number of workers in the workers' firm are
50 years of age or older.
2. Whether the workers in the workers' firm possess skills that are
not easily transferable.
3. The competitive conditions within the workers' industry (i.e. ,
conditions within the industry are adverse).
Affirmative Determinations for Worker Adjustment Assistance
The following certifications have been issued. The date following
the company name and location of each determination references the
impact date for all workers of such determination.
The following certifications have been issued. The requirements of
Section 222(a)(2)(A) (increased imports) of the Trade Act have been
met.
TA-W-64,211; Tarkett Alabama, Inc., NAFCO Div., Florence, AL: October
10, 2007.
The following certifications have been issued. The requirements of
Section 222(a)(2)(B) (shift in production) of the Trade Act have been
met.
None.
The following certifications have been issued. The requirements of
Section 222(b) (supplier to a firm whose workers are certified eligible
to apply for TAA) of the Trade Act have been met.
None.
The following certifications have been issued. The requirements of
Section 222(b) (downstream producer for a firm whose workers are
certified eligible to apply for TAA based on increased imports from or
a shift in production to Mexico or Canada) of the Trade Act have been
met.
None.
[[Page 72847]]
Affirmative Determinations for Worker Adjustment Assistance and
Alternative Trade Adjustment Assistance
The following certifications have been issued. The date following
the company name and location of each determination references the
impact date for all workers of such determination.
The following certifications have been issued. The requirements of
Section 222(a)(2)(A) (increased imports) and Section 246(a)(3)(A)(ii)
of the Trade Act have been met.
TA-W-64,078; Tyco Electronics Corporation, Global Application Tooling
Division, Harrisburg, PA: September 18, 2007.
TA-W-64,177; Louis Hornick and Company, Inc., Haverstraw, NY: September
26, 2007.
TA-W-63,399; Kik Custom Products, Inc., On-Site Wkrs from Qualified
Resource International, Cumberland, RI: May 12, 2007.
TA-W-64,062; Valspar Coatings, General Industrial Division, Jackson,
TN: August 29, 2007.
TA-W-64,066; Mid South Electronics, Inc., East Gadsden, AL: August 22,
2007.
TA-W-64,102; Wellman, Inc., Palmetto Plant,Darlington, SC: May 4, 2008.
TA-W-64,247; Guilford Performance Textiles, GMI Holding Corp, Fuquay-
Varina, NC: October 17, 2007.
The following certifications have been issued. The requirements of
Section 222(a)(2)(B) (shift in production) and Section 246(a)(3)(A)(ii)
of the Trade Act have been met.
TA-W-64,010A; Blue Water Automotive Systems, Inc., St. Clair, MI:
September 8, 2007.
TA-W-64,010B; Blue Water Automotive Systems, Inc., St. Clair, MI:
September 8, 2007.
TA-W-64,010C; Blue Water Automotive Systems, Inc., Port Huron, MI:
September 8, 2007.
TA-W-64,010D; Blue Water Automotive Systems, Inc., St. Clair, MI:
September 8, 2007.
TA-W-64,010E; Blue Water Automotive Systems, Inc., Caro, MI: September
8, 2007.
TA-W-64,010; Blue Water Automotive Systems, Inc., Marysville, MI:
September 8, 2007.
TA-W-64,031; Gates Corporation, North American Power Transmission
Division, Jefferson, NC: September 5, 2007.
TA-W-64,197; Avid Medical Products, Formerly Known as Horizon Medical,
Flextronics Medical, Santa Ana, CA: October 9, 2007.
TA-W-64,268; Eagle Ottawa LLC, Waterloo, IA: October 22, 2007.
TA-W-64,300; U.S. Marine Bayliner, Brunswick Boat Division, Pipestone,
MN: October 28, 2007
TA-W-64,351; Dura Automotive Systems, Inc., HCN Cable Division,
Hannibal, MO: October 18, 2008.
TA-W-63,952; Intel Corporation, Fab 11, Rio Rancho, NM: August 20,
2007.
TA-W-63,985; Cooper Standard Automotive, Noise, Vibration and Harshness
Div., Auburn, IN: October 7, 2008.
TA-W-64,125; GE Healthcare Bioscience BioProess Corp., Biopharma
Instruments, Aerotek, Connections, etc, Somerset, NJ: September 26,
2007.
TA-W-64,152; McClatchy Newspapers, Inc., dba The Sacramento Bee, AD
Central Department, Sacramento, CA: September 22, 2007.
TA-W-64,236; Shop Vac Endicott, Endicott, NY: October 16, 2007.
TA-W-64,248; Freudenberg Nonwovens, Industrial and Interlining
Division, Durham, NC: October 17, 2007.
TA-W-64,371; SMI Bell Manufacturing, dba SML Bekk,
The following certifications have been issued. The requirements of
Section 222(b) (supplier to a firm whose workers are certified eligible
to apply for TAA) and Section 246(a)(3)(A)(ii) of the Trade Act have
been met.
TA-W-64,156; Boise Cascade, LLC, Kettle Falls, WA: October 1, 2007.
TA-W-64,323; Hoover Universal, dba Johnson Controls, Inc., Jefferson
City, MO: October 29, 2007.
TA-W-64,325; Yorozu Automotive Mississippi, Inc., Vicksburg, MS:
October 31, 2007.
TA-W-63,892; Display Pack, Inc., Leased Wkrs Staffing, Inc., Formerly
known as Axios, Inc., Grand Rapids, MI: August 12, 2007.
The following certifications have been issued. The requirements of
Section 222(b) (downstream producer for a firm whose workers are
certified eligible to apply for TAA based on increased imports from or
a shift in production to Mexico or Canada) and Section 246(a)(3)(A)(ii)
of the Trade Act have been met.
None.
Negative Determinations for Alternative Trade Adjustment Assistance
In the following cases, it has been determined that the
requirements of 246(a)(3)(A)(ii) have not been met for the reasons
specified. The Department has determined that criterion (1) of Section
246 has not been met. The firm does not have a significant number of
workers 50 years of age or older.
None.
The Department has determined that criterion (2) of Section 246 has
not been met. Workers at the firm possess skills that are easily
transferable.
TA-W-64,211; Tarkett Alabama, Inc., NAFCO Div., Florence, AL.
The Department has determined that criterion (3) of Section 246 has
not been met. Competition conditions within the workers' industry are
not adverse.
None.
Negative Determinations for Worker Adjustment Assistance and
Alternative Trade Adjustment Assistance
In the following cases, the investigation revealed that the
eligibility criteria for worker adjustment assistance have not been met
for the reasons specified.
Because the workers of the firm are not eligible to apply for TAA,
the workers cannot be certified eligible for ATAA.
The investigation revealed that criteria (a)(2)(A)(I.A.) and
(a)(2)(B)(II.A.) (employment decline) have not been met.
None.
The investigation revealed that criteria (a)(2)(A)(I.B.) (Sales or
production, or both, did not decline) and (a)(2)(B)(II.B.) (shift in
production to a foreign country) have not been met.
None.
The investigation revealed that criteria (a)(2)(A)(I.C.) (increased
imports) and (a)(2)(B)(II.B.) (shift in production to a foreign
country) have not been met.
TAW-63,582; Power Packer Automotive, A Division of Actuant Corporation,
Glendale, WI.
TAW-63,922; Kongsberg Automotive, Inc., Selmer,TN.
TAW-64,097; EcoWater Systems LLC, A Subsidiary of the Marmon Group,
Woodbury, MN.
The workers' firm does not produce an article as required for
certification under Section 222 of the Trade Act of 1974.
None.
The investigation revealed that criteria of Section 222(b)(2) has
not been met. The workers' firm (or subdivision) is not a supplier to
or a downstream producer for a firm whose workers were certified
eligible to apply for TAA.
None.
I hereby certify that the aforementioned determinations were
issued during the period of November 10 through November 14, 2008.
Copies of these determinations are available for inspection in Room
C-5311, U.S.
[[Page 72848]]
Department of Labor, 200 Constitution Avenue, NW., Washington, DC
20210 during normal business hours or will be mailed to persons who
write to the above address.
Dated: November 21, 2008.
Linda G. Poole,
Certifying Officer, Division of Trade Adjustment Assistance.
[FR Doc. E8-28351 Filed 11-28-08; 8:45 am]
BILLING CODE 4510-FN-P