[Federal Register Volume 73, Number 43 (Tuesday, March 4, 2008)]
[Notices]
[Pages 11632-11636]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E8-4103]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2008-0127; FRL-8353-6]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from January 1, 2008 through January 31, 2008, consists of the
PMNs and TMEs, both pending or expired, and the notices of commencement
to manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before April 3, 2008.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2008-0127, by one of the following methods:
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of
Pollution Prevention and Toxics (OPPT), Environmental Protection
Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID Number EPA-HQ-OPPT-2007-1193. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the DCO's normal hours of operation, and special
arrangements should be made for deliveries of boxed information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2008-0127. EPA's policy is that all comments received will be included
in the docket without change and may be made available on-line at
http://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' system,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov,
your e-mail address will be automatically captured and included as part
of the comment that is placed in the docket and made available on the
Internet. If you submit an electronic comment, EPA recommends that you
include your name and other contact information in the body of your
comment and with any disk or CD-ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses. For additional
information about EPA's public docket, visit the EPA Docket Center
homepage at http://www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket are listed in the docket index
available in regulations.gov. To access the electronic docket, go to
http://www.regulations.gov, select ``Advanced Search,'' then ``Docket
Search.'' Insert the docket ID number where indicated and select the
``Submit'' button. Follow the instructions on the regulations.gov
website to view the docket index or
[[Page 11633]]
access available documents. Although listed in the index, some
information is not publicly available, e.g., CBI or other information
whose disclosure is restricted by statute. Certain other material, such
as copyrighted material, will be publicly available only in hard copy.
Publicly available docket materials are available electronically at
http://www.regulations.gov, or, if only available in hard copy, at the
OPPT Docket. The OPPT Docket is located in the EPA Docket Center (EPA/
DC) at Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW.,
Washington, DC. The EPA/DC Public Reading Room hours of operation are
8:30 a.m. to 4:30 p.m., Monday through Friday, excluding Federal
holidays. The telephone number of the EPA/DC Public Reading Room is
(202) 566-1744, and the telephone number for the OPPT Docket is (202)
566-0280. Docket visitors are required to show photographic
identification, pass through a metal detector, and sign the EPA visitor
log. All visitor bags are processed through an X-ray machine and
subject to search. Visitors will be provided an EPA/DC badge that must
be visible at all times in the building and returned upon departure.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: [email protected].
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM
that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and
then identify electronically within the disk or CD-ROM the specific
information that is claimed as CBI. In addition to one complete version
of the comment that includes information claimed as CBI, a copy of the
comment that does not contain the information claimed as CBI must be
submitted for inclusion in the public docket. Information so marked
will not be disclosed except in accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at your estimate in sufficient detail to allow for it to be
reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from January 1, 2008 through January
31, 2008, consists of the PMNs and TMEs, both pending or expired, and
the notices of commencement to manufacture a new chemical that the
Agency has received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs and TMEs, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you are interested in information that is not included in
the following tables, you may contact EPA as described in Unit II. to
access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 51 Premanufacture Notices Received From: 01/01/08 to 01/31/08
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-08-0158 01/02/08 03/31/08 CBI (G) Corrosion (G) Fatty acid amine
inhibitor derivative
P-08-0159 01/02/08 03/31/08 CBI (G) Corrosion (G) Fatty acid amine
inhibitor derivative
P-08-0160 01/03/08 04/01/08 3M (G) Intermediate (G) Aryloxyalcohol
P-08-0161 01/03/08 04/01/08 3M (G) Monomer (G) Aryloxyacrylate
P-08-0162 01/02/08 03/31/08 CBI (S) Intermediate (G) Fatty acid
derivative
P-08-0164 01/08/08 04/06/08 Esstech, Inc. (S) Cross-linking (S) 1,2,4,5-
agent; metal benzenetetra
adhesive carboxylic acid; 1,4-
bis(2-((2-methyl-1-
oxo-2-
propenyl)oxy)ethyl)e
ster
[[Page 11634]]
P-08-0165 01/09/08 04/07/08 CBI (S) Deodorizer for (G) Extract of tea
consumer products
P-08-0166 01/11/08 04/09/08 PPG Industries, Inc. (G) Component of (G) Trimethoxysilane
coating with open
use
P-08-0167 01/11/08 04/09/08 Mitsubishi Chemical (S) Molding material (G) Alkanedioic acid,
Performance for agriculture; polymer with 1,4-
Polymers, Inc. molding material for butanediol
food package;
material for fiber,
monofilament;
molding material for
construction;
material for sheet,
film
P-08-0168 01/11/08 04/09/08 CBI (G) Specialty (G) Potassium humate,
additive polymer with acrylic
monomers
P-08-0169 01/14/08 04/12/08 CBI (G) Crosslinking (G) Aromatic
agent for coatings polyisocyanate,
glycol ethers-
blocked
P-08-0170 01/14/08 04/12/08 CBI (G) Crosslinking (G) Aromatic
agent for coatings polyisocyanate,
glycol ether and
aliphatic alcohol-
blocked
P-08-0171 01/14/08 04/12/08 CBI (G) Crosslinking (G) Aromatic
agent for coatings polyisocyanate,
aliphatic diol,
glycol ether-blocked
P-08-0172 01/14/08 04/12/08 CBI (G) Crosslinking (G) Aromatic
agent for coatings polyisocyanate,
aliphatic diol,
glycol ether-blocked
P-08-0173 01/14/08 04/12/08 CBI (G) Crosslinking (G) Aromatic
agent for coatings polyisocyanate,
glycol ethers-
blocked
P-08-0174 01/14/08 04/12/08 CBI (G) Crosslinking (G) Aromatic
agent for coatings polyisocyanate,
aliphatic polyol,
glycol ethers-
blocked
P-08-0175 01/14/08 04/12/08 CBI (G) Open non- (G) Polyurethane
dispersive elastomer
(elastomer)
P-08-0176 01/15/08 04/13/08 Ineos Olefine and (S) Catalyst for (S) Magnesium, bu
Polymers USA LLC polyolefins alc. chloro titanium
polymerization complexes
P-08-0177 01/14/08 04/12/08 CBI (G) (1) Property (S) Multi-walled
modifier in carbon nanotubes
electronic
applications,
contained use; (2)
Property modifier in
polymer composites,
contained use
P-08-0178 01/14/08 04/12/08 CBI (G) Chemical (G) Substituted
intermediate that is benzoyl chloride
chemically
transformed in use
P-08-0179 01/14/08 04/12/08 CBI (G) Nucleator for (G) 1,2,3-
polymers propanetricarboxamid
e derivative
P-08-0180 01/14/08 04/12/08 CBI (G) Precursor to (G) Salt of
another chemical condensation product
substance, of cyclic diketone
destructive use
P-08-0181 01/14/08 04/12/08 CBI (G) Precursor to (G) Substituted
another chemical benzoic acid
substance,
destructive use
P-08-0182 01/15/08 04/13/08 CBI (G) Reactant (G) Acid modified
alumina
P-08-0183 01/16/08 04/14/08 CIBA Corporation (S) High mw pigment (G) Polyethylene
dispersant in paints gylcol/polyacrylate/
and coatings vinylpyridine block
polymer
P-08-0184 01/16/08 04/14/08 CIBA Corporation (S) High MW pigment (G) Polyacrylate/
dispersant in paints vinylpyridine block
and coatings copolymer
P-08-0185 01/08/08 04/06/08 Advanced Polymer, (S) Adhesion promoter (S) 1-butene, polymer
Inc. for polypropylene with ethene and 1-
propene, maleated
P-08-0186 01/18/08 04/16/08 Colonial Chemical, (S) Surfactant for (S) D-glucopyranose,
Inc. carpet cleaning; oligomeric, decyl
surfactant for octyl glycosides, 3-
antifog coating; (dodecyldimethylammo
wetting agent for nio)-2-hydroxypropyl
fiber treatment ethers, chlorides
P-08-0187 01/18/08 04/16/08 Colonial Chemical, (S) Surfactant for (S) D-glucopyranose,
Inc. carpet cleaning; oligomeric, C10 16-
surfactant for alkyl glycosides, 3-
antifog coating; (dodecyldimethylammo
wetting agent for nio)-2-hydroxypropyl
fiber treatment ethers, chlorides
P-08-0188 01/18/08 04/16/08 Colonial Chemical, (S) Surfactant for (S) D-glucopyranose,
Inc. carpet cleaning; oligomeric, decyl
surfactant for octyl glycosides, 3-
antifog coating; (dimethyloctadecylam
wetting agent for monio)-2-
fiber treatment hydroxypropyl
ethers, chlorides
P-08-0189 01/18/08 04/16/08 Colonial Chemical, (S) Surfactant for (S) D-glucopyranose,
Inc. carpet cleaning; oligomeric, C10 16-
surfactant for alkyl glycosides, 3-
antifog coating; (dimethyloctadecylam
wetting agent for monio)-2-
fiber treatment hydroxypropyl
ethers, chlorides
P-08-0190 01/18/08 04/16/08 Colonial Chemical, (S) Surfactant for (S) D-glucopyranose,
Inc. carpet cleaning; oligomeric, C10 16-
surfactant for alkyl decyl octyl
antifog coating; glycosides, 2-
wetting agent for hydroxy-3-
fiber treatment (trimethylammonio)pr
opyl ethers,
chlorides
P-08-0191 01/18/08 04/16/08 Cytec Industries Inc. (G) Antiscalant (G) Modified
polyamine
P-08-0192 01/18/08 04/16/08 Cytec Industries Inc. (G) Antiscalant (G) Modified
polyamine
P-08-0193 01/18/08 04/16/08 Cytec Industries Inc. (G) Antiscalant (G) Modified
polyamine
[[Page 11635]]
P-08-0194 01/22/08 04/20/08 Cytec Industries Inc. (G) Ink additive (G) Fatty acids,
dimers, polymers
with alkenoic acid,
polyoxyalkylene and
alkyl substituted
triol
P-08-0195 01/22/08 04/20/08 Cytec Industries Inc. (G) Coatings resin (G) Acrylated
aliphatic
polyurethane
P-08-0196 01/22/08 04/20/08 CBI (S) Polyester raw (G) Polyester
material used in the
manufacture of
industrial coatings
for automotive or
metal finishing
P-08-0197 01/22/08 04/20/08 CBI (S) Polyester raw (G) Epoxy modified
material used in the polyester
manufacture of
industrial coatings
for automotive or
metal finishing
P-08-0198 01/23/08 04/21/08 Incorez Corporation (S) Curing agent for (G) Aromatic
epoxy based coatings polyepoxide-
polyamine copolymer
P-08-0199 01/23/08 04/21/08 CBI (S) Additive/filler (G) Carbon
for polymer
composites; support
media for industrial
catalysts
P-08-0200 01/24/08 04/22/08 CBI (G) (Product 1) (G) Partially
Additive for open, fluorinated
non-dispersive use; amphiphilic
(Product 2) Coating condensation polymer
for open, non-
dispersive use
P-08-0201 01/24/08 04/22/08 Supresta U.S. LLC (S) Flame retardant (G) Aryl phosphoric
for engineering acid ester
resins
P-08-0202 01/25/08 04/23/08 3M (G) Prepolymer (G) Polyetheramine
diisocyanate
prepolymer
P-08-0203 01/25/08 04/23/08 CBI (G) Moisture curing (G) Isocyanate
polyurethane terminated urethane
adhesive polymer
P-08-0204 01/23/08 04/21/08 CBI (G) Dispersant for (G) Methacrylate
inorganic materials copolymer
P-08-0205 01/30/08 04/28/08 CBI (G) Auxiliary / (G) Acrylic acid
finishing agent for polymer with alkyl
leather products acrylate, alkenyl
benzene and acryl
amide, ammonium salt
P-08-0206 01/30/08 04/28/08 CBI (G) Interior and (G) Styrene/acrylate
exterior coatings copolymer
(carboxylated)
P-08-0207 01/30/08 04/28/08 CBI (G) Raw material for (G) Substituted
oil field styrene copolymer
applications
P-8-0208 01/30/08 04/28/08 CBI (G) Component of (G) Acrylic styrene
paints polymer
P-08-0209 01/31/08 04/29/08 CIBA Corporation (S) Antioxidant for (G) Poly(oxy-1,2-
polymers ethanediyl), .alpha.-
bis alkyl
substituted
hydroxyphenyl ester-
.omega.-bis alkyl
substituted
hydroxyphenyl ester
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the TMEs
received:
II. 5 Test Marketing Exemption Notices Received From: 01/01/08 to 01/31/08
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-08-0002 01/18/08 03/02/08 Cytec Industries Inc. (G) Antiscalant (G) Modified
polyamine
T-08-0003 01/18/08 03/02/08 Cytec Industries Inc. (G) Antiscalant (G) Modified
polyamine
T-08-0004 01/18/08 03/02/08 Cytec Industries Inc. (G) Antiscalant (G) Modified
polyamine
T-08-0005 01/22/08 03/06/08 Cytec Industries Inc. (G) Ink additive (G) Fatty acids,
dimers, polymers
with alkenoic acid,
polyoxyalkylene and
alkyl substituted
triol
T-08-0006 01/22/08 03/06/08 Cytec Industries Inc. (G) Coatings resin (G) Acrylated
aliphatic
polyurethane
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table III of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
[[Page 11636]]
III. 31 Notices of Commencement From: 01/01/08 to 01/31/08
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-00-1188 01/30/08 12/27/07 (G) Poly(oxyalkylene)bis(2-
maleimidoacetate)
P-04-0009 01/08/08 12/06/07 (G) Alkylbenzene sulfonic
acid
P-05-0186 01/14/08 12/31/07 (G) There are 5 chemical
substances in this PMN of
which 3 are Class I
substances and the other
2 are Class II
substances. The generic
name for each of the 5
chemical susbstances are
given below. Class I
substances: 1. Reaction
product of polyether
amine and methyl isobutyl
ketone; 2. Reaction
product of aminopropyl
morpholine and methyl
isobutyl ketone; 3.
Rreaction product of
fatty acids, ethylene
amine and methyl isobutyl
ketone. Class II
substances: 1. Reaction
product of formaldehyde,
1,3-benzenedimethanamine,
phenol, and methyl
isobutyl ketone; 2.
Reaction product of fatty
acids, butoxymethyl
oxirane, formaldehyde-
phenol polymer glycidyl
ether, aminopropyl
morpholine, polyether
amine, ethylene amine and
methyl isobutyl ketone.
P-05-0193 01/30/08 01/04/08 (G) Polyester acrylate
oligomer
P-06-0646 01/15/08 12/15/07 (G) Fatty acids, alkyl-
unsatd., dimers, reaction
products with bisphenol a-
bisphenol a diglycidyl
ether polymer and
polyethylenepolyamines
P-07-0060 01/28/08 01/24/08 (G) Aliphatic acrylate
P-07-0095 01/08/08 12/27/07 (G) Substituted pyridone
P-07-0110 01/02/08 11/26/07 (G) Calixarene
P-07-0112 01/07/08 12/18/07 (G) Substituted catechol
P-07-0113 01/07/08 12/18/07 (G) Chloroalkyl
substituted catechol
P-07-0116 01/07/08 12/17/07 (G) Alkyl glycidyl ether
P-07-0285 01/09/08 01/03/08 (G) Polyurethane
derivative
P-07-0291 01/14/08 12/27/07 (G) Cobalt zinc complex
derivative
P-07-0338 01/09/08 01/02/08 (G) Aliphatic polyurethane
resin
P-07-0373 01/14/08 12/24/07 (G) Counterion of
sulfonated CI pigment
yellow 138
P-07-0386 01/30/08 01/21/08 (G) Heteropolycycle alkyl
ether sulfate salt
P-07-0394 01/25/08 01/12/08 (G) Alkoxy siloxane
P-07-0423 01/09/08 12/20/07 (G) Acrylic polymer with
styrene and polyethylene
glycol methyl ether
methacrylate
P-07-0453 01/28/08 01/11/08 (G) Halide salt of an
alkylamine
P-07-0481 01/08/08 12/04/07 (G) Phosphonium, teraaryl-
, tetrakis(aryl)borate(1-
)
P-07-0508 01/09/08 12/17/07 (G) Ethene-vinyl acetate-
acrylate-aldehyde
modified polymer
P-07-0515 01/08/08 12/20/07 (G) Acrylic latex
P-07-0530 01/15/08 12/20/07 (G) Diol initiated polymer
with fatty acids methyl
esters hydroformylation
products, hydrogenated
P-07-0571 01/30/08 12/25/07 (G)
[[[[(methoxyphenyl)amino]
carbonyl]-
oxopropyl]diazenyl]-
benzoic acid
P-07-0573 01/23/08 01/16/08 (S) D-glucopyranose,
oligomeric, decyl octyl
glycosides, 2-hydroxy-3-
sulfopropyl ethers,
sodium salts
P-07-0574 01/23/08 01/16/08 (S) D-glucopyranose,
oligomeric, C10 16-alkyl
glycosides, 2-hydroxy-3-
sulfopropyl ethers,
sodium salts
P-07-0596 01/14/08 12/18/07 (S) A complex combination
of alkanes produced from
tallow by a hydrocracking
process. It consists of
alkanes having carbon
numbers predominantly in
the range of C9 through
C20 and boiling in the
range of approximately
163 degrees celcius to
357 degrees celcius (325
degrees fahrenheit to 675
degrees fahrenheit)
Distillates, hydrocracked
tallow, 9-20.
P-07-0609 01/18/08 01/03/08 (G) Sulfurized fatty acid
derivative
P-07-0640 01/28/08 01/17/08 (G) Isocyanate functional
polyester polyether
urethane polymer
P-07-0655 01/23/08 12/13/07 (G) Waterborne
polyurethane
P-07-0695 01/11/08 12/23/07 (G) Sorbitan, alkanoate
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: February 25, 2008.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. E8-4103 Filed 3-3-08; 8:45 am]
BILLING CODE 6560-50-S