[Federal Register Volume 73, Number 15 (Wednesday, January 23, 2008)]
[Notices]
[Pages 3958-3964]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E8-1003]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[EPA-HQ-OPPT-2007-1193; FRL-8348-9]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from October 2, 2007 through November 30, 2007, consists of the
PMNs and TMEs, both pending or expired, and the notices of commencement
to manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before February 22, 2008.
ADDRESSES: Submit your comments, identified by docket identification
(ID) number EPA-HQ-OPPT-2007-1193, by one of the following methods:
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO), EPA
East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID Number EPA-HQ-OPPT-2007-1193. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the DCO's normal hours of operation, and special
arrangements should be made for deliveries of boxed information.
Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-
2007-1193. EPA's policy is that all comments received will be included
in the docket without change and may be made available on-line at
http://www.regulations.gov, including any personal information
provided, unless the comment includes information claimed to be
Confidential Business Information (CBI) or other information whose
disclosure is restricted by statute. Do not submit information that you
consider to be CBI or otherwise protected through regulations.gov or e-
mail. The regulations.gov website is an ``anonymous access'' system,
which means EPA will not know your identity or contact information
unless you provide it in the body of your comment. If you send an e-
mail comment directly to EPA without going through regulations.gov,
your e-mail address will be automatically captured and included as part
of the comment that is placed in the docket and made available on the
Internet. If you submit an electronic comment, EPA recommends that you
include your name and other contact information in the body of your
comment and with any disk or CD-ROM you submit. If EPA cannot read your
comment due to technical difficulties and cannot contact you for
clarification, EPA may not be able to consider your comment. Electronic
files should avoid the use of special characters, any form of
encryption, and be free of any defects or viruses. For additional
information about EPA's public docket, visit the EPA Docket Center
homepage at http://www.epa.gov/epahome/dockets.htm.
Docket: All documents in the docket are listed in the docket index
available in regulations.gov. To access the electronic docket, go to
http://www.regulations.gov, select ``Advanced Search,'' then ``Docket
Search.'' Insert the docket ID number where indicated and select the
``Submit'' button. Follow the instructions on the regulations.gov
website to view the docket index or access available documents.
Although listed in the index, some information is not publicly
available, e.g., CBI or other information whose disclosure is
restricted by statute. Certain other material, such as copyrighted
material, will be publicly available only in hard copy. Publicly
available docket materials are available electronically at http://www.regulations.gov, or, if only available in hard copy, at the OPPT
Docket. The OPPT Docket is located in the EPA Docket Center (EPA/DC) at
Rm. 3334, EPA West Bldg., 1301 Constitution Ave., NW., Washington, DC.
The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30
p.m., Monday through Friday, excluding Federal holidays. The telephone
number of the EPA/DC Public Reading Room is (202) 566-1744, and the
telephone number for the OPPT Docket is (202) 566-0280. Docket visitors
are required to show photographic identification, pass through a metal
detector, and sign the EPA visitor log. All visitor bags are processed
through an X-ray machine and subject to search. Visitors will be
provided an EPA/DC badge that must be visible at all times in the
building and returned upon departure.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404;
e-mail address: [email protected].
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
[[Page 3959]]
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM
that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and
then identify electronically within the disk or CD-ROM the specific
information that is claimed as CBI. In addition to one complete version
of the comment that includes information claimed as CBI, a copy of the
comment that does not contain the information claimed as CBI must be
submitted for inclusion in the public docket. Information so marked
will not be disclosed except in accordance with procedures set forth in
40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket ID number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions. The Agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at your estimate in sufficient detail to allow for it to be
reproduced.
vi. Provide specific examples to illustrate your concerns and
suggest alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from October 2, 2007 through November
30, 2007, consists of the PMNs and TMEs, both pending or expired, and
the notices of commencement to manufacture a new chemical that the
Agency has received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs and TMEs, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you are interested in information that is not included in
the following tables, you may contact EPA as described in Unit II. to
access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 111 Premanufacture Notices Received From: 10/01/07 to 11/30/07
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-08-0001 10/01/07 12/29/07 CBI (G) Esterified (G) Esterified
polyamic acid polyamic acid
polymer for polymer
coatings, open, non-
dispersive use
P-08-0002 10/01/07 12/29/07 Genencor, (Danisco, (S) Textile chemical (S) Benzonitrile, 4-
USA) formulation (TCF) of hydroxy-3,5-
denim bleaching dimethoxy-
products; laundry (syringonitrile)
denim bleaching and/
or modification of
the cast of denim
P-08-0003 10/01/07 12/29/07 CBI (S) Intermediate for (G) Methacrylate
paint binder monomer
P-08-0004 10/01/07 12/29/07 CBI (S) Topcoat for (G) Aliphatic
leather; topcoat for polycarbonate diol
plastics and epdn polyurethane
rubber
P-08-0005 10/01/07 12/29/07 CBI (S) Topcoat for (G) Aliphatic
leather; topcoat for polycarbonate diol
plastics and epon polyurethane
rubber
P-08-0006 10/03/07 12/31/07 CBI (G) Resin for (G) Acrylic polyester
coatings microgel polymer
P-08-0007 10/03/07 12/31/07 CBI (G) Resin for (G) Polyester polymer
coatings
P-08-0008 10/03/07 12/31/07 CBI (G) Resin for (G) Acrylic polymer
coatings
P-08-0009 10/03/07 12/31/07 CBI (G) Resin for (G) Acrylic polymer
coatings
P-08-0010 10/03/07 12/31/07 CBI (G) Resin for (G) Acrylic polymer
coatings
P-08-0011 10/04/07 01/01/08 CBI (S) Paint binder (G) Octyl acrylates
(whichever of the
two PMN substance is
produced will be
used as a paint
binder)
P-08-0012 10/04/07 01/01/08 CBI (S) Paint binder (G) Octyl acrylates
(whichever of the
two PMN substance is
produced will be
used as a paint
binder)
P-08-0013 10/03/07 12/31/07 Incorez Corporation (S) Curing agent for (G) Emulsified
epoxy based coatings polyamine hardener
P-08-0014 10/03/07 12/31/07 CBI (G) Resin for (G) Acrylic polymer
coatings
P-08-0015 10/03/07 12/31/07 CBI (G) Resin for (G) Acrylic polymer
coatings
P-08-0016 10/09/07 01/06/08 CBI (S) Chemical (G) Hydroxymercapto
Intermediate substituted benzene
[[Page 3960]]
P-08-0017 10/09/07 01/06/08 The Dow Chemical (G) Component of (G) Phosphorated
Company electrical laminates phenolic novolac
P-08-0018 10/10/07 01/07/08 CBI (G) Oilfield (G) Modified olefins
applications
P-08-0019 10/10/07 01/07/08 CBI (G) Component of (G) Benzene, 1,4-
manufactured bis(aralkoxy)-
consumer article -
contained use
P-08-0020 10/10/07 01/07/08 CBI (G) Chemical (S) Propanol, 1 (or
intermediate in the 2)-(methyl-2-
manufacture of other phenoxyethoxy)-
industrial
chemicals, and
additive in
formulated coating
products
P-08-0021 10/11/07 01/08/08 Robertet, Inc. (S) As an odoriferous (S) Alcoholic
component of beverages, rum, ext.
fragrance compounds
P-08-0022 10/11/07 01/08/08 Mitsubishi Chemical (S) Molding material (G) Alkanedioic acid,
Performance for agriculture; polymer with
Polymers, Inc. molding material for butanedioic acid,
food package; 1,4-butanediol and 2-
material for fiber, hydroxypropanoic
monofilament; acid
molding material for
construction;
material for sheet,
film
P-08-0023 10/11/07 01/08/08 Mitsubishi Chemical (S) Molding material (G) Alkanedioic acid,
Performance for agriculture; polymer with 1,4-
Polymers, Inc. molding material for butanediol and 2-
food package; hydroxypropanoic
material for fiber, acid
monofilament;
molding material for
construction;
material for sheet,
film
P-08-0024 10/10/07 01/07/08 CBI (G) Crosslinking (S) 1,3-dioxolane-4-
agent to be butanol,2-ethenyl-
ultimately used in
the manufacture of
automotive and
aircraft coating
materials
P-08-0025 10/12/07 01/09/08 CBI (G) Papermaking (S) Formamide, N-
chemical ethenyl-,
homopolymer,
hydrolyzed, N-(3-
carboxy-1-oxopropyl)
N-[2-hydroxy-3-
(trimethylammonio)pr
opyl] derivs.,
chlorides
P-08-0026 10/15/07 01/12/08 CBI (S) Melt processing (S) Methanone, 1,1'-
e.g. injection (1,4-phenylene)bis[1-
moulding to produce (4-fluorophenyl)-,
finished articles polymer with bis(4-
hydroxyphenyl)methan
one
P-08-0027 10/15/07 01/12/08 CBI (G) Silicone (G) Dimethyl siloxane
intermediate polyglycol
P-08-0028 10/15/07 01/12/08 CBI (S) Textile treating (G) Dimethyl siloxane
agent polyethylene glycol
P-08-0029 10/17/07 01/14/08 CBI (G) Destructive use (G) Hindered phenolic
ester
P-08-0030 10/18/07 01/15/08 CBI (G) A. Synthetic (G) 1,1 Geminal
lubricant base fluid disubstituted
(major); B. Reactive ethylene
intermediate (minor)
P-08-0031 10/18/07 01/15/08 CBI (G) A. Synthetic (G) 1,1 Geminal
lubricant base fluid disubstituted
(major); B. Reactive ethylene
intermediate (minor)
P-08-0032 10/18/07 01/15/08 CBI (G) A. Synthetic (G) 1,1 Geminal
lubricant base fluid disubstituted
(major); B. Reactive ethylene
intermediate (minor)
P-08-0033 10/19/07 01/16/08 CBI (G) Chemical (G) Chloro fluoro
intermediate alkane
P-08-0034 10/22/07 01/19/08 Hydbrid Plastics, (S) Epoxy resin for (S) Oxirane, 2-[[3-
Inc. high temperature (trimethoxysilyl)pro
aerospace composites poxy]methyl]-,
hydrolyzed
P-08-0035 10/19/07 01/16/08 CBI (G) Fabric treatment (S) 6H-
agent dibenz[c,e][1,2]oxap
hosphorium,6-
(phenylmethyl)-,6-
oxide
P-08-0036 10/23/07 01/20/08 Fujifilm Hunt (S) Intermediated for (S)
Chemicals U.S.A., production of PMN Benzenecarboximidami
Inc. substance P-06-444 de, n-hydroxy-4-
nitro-
P-08-0037 10/24/07 01/21/08 Forbo Adhesives, LLC (G) Hot melt (G) Isocyanate
polyurethane functional polyester
adhesive polyether urethane
polymer
P-08-0038 10/25/07 01/22/08 CBI (S) Aliphatic (G) Tertiary amine
acrylate polymer acrylate
used in the
manufacture of
Ultraviolet curable
inks and coatings
P-08-0039 10/25/07 01/22/08 CBI (G) Hardening agent (G) Mixed amino
diaryl sulfone
isomers
P-08-0040 10/25/07 01/22/08 CBI (G) Sealant (G) Polyurethane
hybrid
[[Page 3961]]
P-08-0041 10/25/07 01/22/08 CBI (G) Paint (G) Neodecanoic acid,
oxiranyl ester
modified alkyl
acrylate,polymer
with alkyl
acrylates, styrene
and hydroxyalkyl
acrylates, peroxide-
initiated
P-08-0042 10/23/07 01/20/08 CBI (G) Foam additive (G) Treated silica
P-08-0043 10/26/07 01/23/08 CBI (G) Jacketing of (G) Fluoropolymer
wires and data-
cables
P-08-0044 10/26/07 01/23/08 CBI (G) Non-dispersive (G) Animated epoxy
use resin
P-08-0045 10/29/07 01/26/08 Rahn USA Corp. (S) Ultra violet / (G) Aliphatic
electron beam urethane acrylate
reactive oligomer
formulations
P-08-0046 10/29/07 01/26/08 CBI (G) Coating additive (G) Mixed metal oxide
complex
P-08-0047 10/29/07 01/26/08 CBI (G) Raw material (G) Metal oxide
complex
P-08-0048 10/31/07 01/28/08 CBI (G) Colourant (G) Acrylic polymer
dispersant
P-08-0049 10/30/07 01/27/08 CBI (G) Ink additive (G) 2-propenoic acid,
2-methyl-, polymer
with alkyl 2-
propenoate,
ethenylbenzene and 2-
propenoic acid,
metal salt,
peroxycompound-
initiated
P-08-0050 10/31/07 01/28/08 CBI (G) Metalworking (G) Amide polymer
fluid component
P-08-0051 10/31/07 01/28/08 3M Company (G) Adhesive (G) Substituted
acrylate polymer
P-08-0052 11/01/07 01/29/08 BAE Systems , (G) For use as a high (S) Nitrotriazolone 3-
ordnance systems explosive in nitro-1,2,4-triazol-
Inc. explosives 5-one
formulatons for DOD
P-08-0053 11/01/07 01/29/08 Reichhold, Inc. (S) Topcoats for (G) Urethane modified
industrial equipment vegetable oil,
epoxidized polymer
P-08-0054 11/01/07 01/29/08 CBI (G) Semiconductor (G) Poly (arylene
coating ether)
P-08-0055 11/01/07 01/29/08 CBI (G) Open non- (G) Aqueous hydroxyl-
dispersive functional polyester
(coatings) polyacrylate
dispersion
P-08-0056 11/01/07 01/29/08 CBI (G) Functional fluid (G) Polyalphaolefins;
paos
P-08-0057 11/01/07 01/29/08 CBI (G) Functional fluid (G) Polyalphaolefins;
paos
P-08-0058 11/01/07 01/29/08 CBI (G) Functional fluid (G) Polyalphaolefins;
paos
P-08-0059 11/01/07 01/29/08 CBI (G) Functional fluid (G) Polyalphaolefins;
paos
P-08-0060 11/01/07 01/29/08 CBI (G) Functional fluid (G) Polyalphaolefins;
paos
P-08-0061 10/31/07 01/28/08 CBI (G) Reactive (G) Alcohol, reaction
emulsifier for products with
emulsion alkylene oxide,
polymerization alkenyl glycidyl
ether sulfate
P-08-0062 11/01/07 01/29/08 Reichhold, Inc. (S) Topcoats for (G) Urethane modified
industrial equipment vegetable oil,
epoxidized polymer
P-08-0063 11/01/07 01/29/08 CBI (S) Extrusion of (G) Polyamide based
tubing systems; on alkanedioic acid,
injection molding of alkyl lactam and
special applications polyoxyalkylene
P-08-0064 11/02/07 01/30/08 CBI (G) An open non- (G) Rosin modified
dispersive use phenolic resin
P-08-0065 11/01/07 01/29/08 CBI (G) Rheology additive (G) Urethane-urea
P-08-0066 11/01/07 01/29/08 CBI (G) Rheology additive (G) Urethane-urea
P-08-0067 11/05/07 02/02/08 CIBA Corporation (S) Pigment for (G) 1',1'''-[1,4-
printing ink used in phenylenebis(methyle
time-temperature ne)]bis[1',3'-
indicator labeling dihydro-8-methoxy-
3'3,'-dimethyl-6-
nitro- aromatic
substituted indole
P-08-0068 11/05/07 02/02/08 Firmenich Inc. (S) Aroma for use in (S) Definition:
fragrance mixtures, Extractives and
which in turn are their physically
used in perfumes, modified
soaps, cleansers, derivatives. Schinus
etc. Terebinthifolius.
P-08-0068 11/05/07 02/02/08 Firmenich Inc. (S) Aroma for use in (S) Oils, schinus
fragrance mixtures, terebinthifolius
which in turn are
used in perfumes,
soaps, cleansers,
etc.
P-08-0069 11/05/07 02/02/08 CBI (G) Fuel additive- (G) Alkenyl
destructive use succinimide
P-08-0070 11/05/07 02/02/08 CBI (G) Coating (G) Fluorosilicone
P-08-0071 11/05/07 02/02/08 CBI (G) Coating (G) Fluorosilicone
P-08-0072 11/05/07 02/02/08 CBI (G) Thickener for (G) Poly
inorganic materials (methacryloyloxyalky
l trialkylammonium
salt)
P-08-0073 11/06/07 02/03/08 CBI (S) Crosslinker for (G) Aliphatic
coatings and polyisocyanate, C16-
adhesives alcohol and
polyalkylene glycol-
blocked
P-08-0074 11/06/07 02/03/08 CBI (S) Crosslinker for (G) Aliphatic
coatings and polyisocyanate, C16-
adhesives alcohol and
polyalkylene glycol-
blocked
P-08-0075 11/06/07 02/03/08 CBI (G) Paint (G) Polyisocyanate
resin
P-08-0076 11/07/07 02/04/08 CBI (G) For application (G) Disubstituted
to cellulosic phenylazo
substrates naphthalenstrisulfon
ic acid, salt
[[Page 3962]]
P-08-0077 11/13/07 02/10/08 Orient Corporation of (S) Charge stabilizer (S) Ferrate(1-),
America for electro-photo bis[4-[2-[5-(1,1-
copy toner dimethylethyl)-2-
(hydroxy-
.kappa.o)phenyl]diaz
enyl]-.kappa.n1]-3-
(hydroxy-.kappa.o]-n-
phenyl-2-
naphthalenecarboxami
dato(2-)], hydrogen
(1:1)
P-08-0078 11/13/07 02/10/08 CBI (S) PMN material in (G) Plant oil
fragrance products
P-08-0079 11/13/07 02/10/08 Reichhold, Inc. (S) Resin for paints/ (G) Amine salt of
coatings polyester polyol,
hydroxy substituted
carboxylic acid,
cycloaliphatic
glycol, aliphatic
diisocyanate and
hydroxy substituted
alkylamines.
P-08-0080 11/13/07 02/10/08 Reichhold, Inc. (S) Resin for paints/ (G) Amine salt of
coatings polyester polyol,
cycloaliphatic
glycol, hydroxy
substituted
carboxylic acid,
alkyldiamine and
aliphatic
diisocyanate
P-08-0081 11/13/07 02/10/08 Lubrizol Metalworking (S) Metalworking (S) Soybean oil,
Additives fluid component maleated, ester with
polyethylene glycol
mono-C12 16-alkyl
ethers
P-08-0082 11/13/07 02/10/08 Lubrizol Metalworking (S) Metalworking (S) Soybean oil,
Additives fluid component maleated, ester with
polyethylene glycol
mono-C12 16-alkyl
ethers, potassium
salts
P-08-0083 11/13/07 02/10/08 Lubrizol Metalworking (S) Metalworking (S) Soybean oil,
Additives fluid component maleated, ester with
polyethylene glycol
mono-C12 16-alkyl
ethers, compound
with ethanolamine
P-08-0084 11/13/07 02/10/08 Lubrizol Metalworking (S) Metalworking (S) Soybean oil,
Additives fluid component maleated, ester with
polyethylene glycol
mono-C12 16-alkyl
ethers, compound
with triethanolamine
P-08-0085 11/13/07 02/10/08 Lubrizol Metalworking (S) Metalworking (S) Soybean oil,
Additives fluid component maleated, ester with
polyethylene glycol
mono-C12 16-alkyl
ethers, compound
with branched 3-
(tridecyloxy)-1-
propanamine
P-08-0086 11/13/07 02/10/08 Lubrizol Metalworking (S) Metalworking (S) Amines, C12 14-
Additives fluid component tert-alkyl,
compounds with
maleated soybean oil
ester with
polyethylene glycol
mono-C12 16-alkyl
ethers
P-08-0087 11/14/07 02/11/08 CBI (G) Lubricant (G) Alkyl acid
additive open, non- reaction products
dispersive use with metal salt of
alkyl alcohol
P-08-0088 11/14/07 02/11/08 CBI (G) Emulsifier (G)
Perfluorodioxyalkoni
cacid salt
P-08-0089 11/15/07 02/12/08 CBI (G) Component of (G) Fatty acid oils
paint polymer with
aromatic acid,
acrylates, styrene,
polyol and
conjugated
anhydrides
P-08-0090 11/01/07 01/29/08 CBI (G) Modifier for (G) Epoxy liquid
epoxy formulations polysulfide
P-08-0091 11/13/07 02/10/08 Sasol North America (S) Polymer (S) Oxirane, 2-[[3-
Inc. performance additive (trimethoxysilyl)pro
poxy]methyl]-,
reaction products
with boehmite
(al(oh)o)
P-08-0092 11/13/07 02/10/08 Sasol North America (S) Polymer (S) Oxirane, 2-[[3-
Inc. performance additive (trimethoxysilyl)pro
poxy]methyl]-,
reaction products
with boehmite
(al(oh)o)
P-08-0093 11/16/07 02/13/08 CBI (G) Binder in foundry (G) Aromatic
applications polyester polyol
P-08-0094 11/19/07 02/16/08 CBI (G) Lubricant (G) Alkyl
Additive methacrylate esters
telomers with 1-
dodecanethiol, tert-
bu 2-
ethylhexaneperoxoate-
initiated
P-08-0095 11/19/07 02/16/08 Cytec Industries Inc. (S) Process chemical (S) Phosphonium,
for sulfur removal methyltris (2-
from diesel fuel methylpropyl)-, salt
with 4-
methylbenzenesulfoni
c acid (1:1)
P-08-0096 11/26/07 02/23/08 CBI (G) Binder (G) Polymer of
styrene-butadiene,
polybutadiene,
ethoxylated nonyl
pheneol acrylate and
1,6-hexanediol
diacrylate
[[Page 3963]]
P-08-0097 11/26/07 02/23/08 CBI (G) Binder (G) Polymer of
styrene-butadiene,
polybutanediene,
ethoxylated nonyl
pheneol acrylate and
1,6-hexanediol
diacrylate
P-08-0098 11/26/07 02/23/08 CBI (G) Binder (G) Polymer of
styrene-butadiene,
polybutanediene,
ethoxylated nonyl
pheneol acrylate and
1,6-hexanediol
diacrylate
P-08-0099 11/21/07 02/18/08 AOC LLC (S) Polyester (S) 1,4-
component for benzenedicarboxylic
pultrusion of acid, polymer with
fiberglass 1,2-ethanediol, 2,5-
reinforced plastic furandione, 2,2'-
parts oxybis [ethanol] and
1,2-propanediol
P-08-0100 11/26/07 02/23/08 CBI (G) Metalworking (G) Polypropylene
fluid glycol succinate
P-08-0101 11/26/07 02/23/08 Cytec Industries Inc. (G) Coating resin (S) Phosphinic acid,
additive p,p-diphenyl-
P-08-0102 11/26/07 02/23/08 CBI (G) Industrial liquid (G) Caprolactam-
coatings blocked aliphatic
isocyanate polymer
P-08-0103 11/26/07 02/23/08 CBI (G) Intermediate (G)
Dialkylmonoheterocyc
ledione,
homopolymer, ester
with 1,2,3-
propanetriol
P-08-0104 11/28/07 02/25/08 CBI (G) Open, non- (G) Gallium,
dispersive use phthalocyanine
(additive to coating complex
layer)
P-08-0105 11/28/07 02/25/08 CBI (G) Open, non- (G) Azo compound
dispersive use
(additive to coating
layer)
P-08-0106 11/28/07 02/25/08 CBI (S) Binder for (S) 2-propenoic acid,
coatings for wood 2-methyl-, polymer
with butyl 2-methyl-
2-propenoate, butyl
2-propenoate, n-(1,1-
dimethyl-3-oxobutyl)-
2-propenamide,
ethenylbenzene and
methyl 2-methyl-2-
propenoate
P-08-0107 11/28/07 02/25/08 CBI (G) Rubber additive (G) Alkoxy silane
P-08-0108 11/28/07 02/25/08 CBI (G) Marker for liquid (G) Alkylphthalein
petroleum fuels ester
P-08-0109 11/29/07 02/26/08 CBI (G) Polyester (G) Disubstituted
substrate auxiliary methoxyacetanilide
P-08-0110 11/29/07 02/26/08 CBI (G) Raw material (G) Mixed metal
halide
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the TMEs
received:
II. 1 Test Marketing Exemption Notices Received From: 10/01/07 to 11/30/07
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-08-0001 11/19/07 01/02/08 Cytec industries Inc. (S) Process chemical (S) Phosphonium,
for sulfur removal methyltris (2-
from diesel fuel methylpropyl)-, salt
with 4-
methylbenzenesulfoni
c acid (1:1)
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table III of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
III. 41 Notices of Commencement From: 10/01/07 to 11/30/07
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-02-0748 11/05/07 10/10/07 (S)
Heptacyclo[11.11.1.13,11.
15,21.17,19.19,17.115,23]
dodecasiloxane,
dodecaphenyl-
P-02-0750 11/05/07 10/10/07 (S)
Pentacyclo[9.5.1.13,9.15,
15.17,13]octasiloxane,
octamethyl-
P-02-0751 11/05/07 10/10/07 (S)
Pentacyclo[9.5.1.13,9.15,
15.17,13]octasiloxane,
octaphenyl-
P-02-0778 11/07/07 10/10/07 (G) Dialkyl
dithiocarbamate ester
P-02-0860 11/14/07 10/16/07 (G) Silicoaluminophosphate
with template
P-05-0079 11/06/07 10/12/07 (G) Potassium salt of
substituted arylazo
butanamide
P-05-0138 11/29/07 11/20/07 (G) Multifunctional
acrylate oligomer resin
P-05-0420 11/21/07 11/01/07 (S) Hexanoic acid,
6,6',6''-(1,3,5-triazine-
2,4,6-triyltriimino)tris-
, compound with 1-amino-2-
propanol
[[Page 3964]]
P-05-0423 11/21/07 11/01/07 (S) Hexanoic acid,
6,6',6''-(1,3,5-triazine-
2,4,6-triyltriimino)tris-
, compound with 2-(2-
aminoethoxy) ethanol
P-06-0489 11/29/07 11/16/07 (G) Fluoroalkyl
methacrylate copolymer
P-06-0546 11/27/07 11/19/07 (G) Substituted
carbomonocycle, polymer
with isocyanate
substituted alkyl
carbomonocycle,
substituted alkenoates,
substituted
heteromonocycle,
alkanedioic acid, alkane
diol, reaction products
with substituted
alkylamine, compounds
with substituted alkanol
P-06-0563 11/29/07 11/21/07 (G) Fluoroalkyl
methacrylate copolymer
P-06-0820 11/20/07 11/12/07 (G) Trisubstituted
triazine
P-07-0048 11/23/07 08/21/07 (G) Salt of amine with
aliphatic acid
P-07-0049 11/23/07 10/30/07 (G) Aliphatic polyamide
P-07-0132 11/23/07 11/05/07 (G) Polyurethane
prepolymer; polyurethane
hot melt adhesive
P-07-0156 11/21/07 10/10/07 (G) Aminomercapto siloxane
P-07-0216 11/13/07 11/08/07 (G) Substituted phenyl
amino alkyl sulfonyl
reaction product with
substituted
naphthalenesulfonic acid
amino compound
P-07-0250 11/14/07 10/25/07 (G) Fatty acid modified
polyester resin
P-07-0300 11/02/07 10/29/07 (G) Acrylic polymer on the
basis of isobutyl
methacrylate
P-07-0318 11/15/07 10/16/07 (G) Organic lithium
compound
P-07-0352 11/14/07 10/29/07 (G) Modified polymer of
substituted acrylate and
alkyl methacrylates
P-07-0361 11/06/07 10/23/07 (G) Linseed oil, ester
with pentaerythritol,
polymer with hydrazine, 3-
hydroxy-2-
(hydroxymethyl)2-
methylpropanoic acid, 5-
isocyanato-1-
(isocyanatomethyl)-
alkylcyclohexane, 1,1'-
methylenebis[4.isocyanato
cyclohexane] and
polypropylene glycol,
compounds with
triethylamine
P-07-0392 11/05/07 10/08/07 (G) Modified epoxy resin
P-07-0402 11/21/07 11/05/07 (G) Alkylphenoxy
naphthalic acid amide, n-
alkylphenyl-
P-07-0408 11/05/07 10/16/07 (G) Epoxy phenolic resin
P-07-0439 11/21/07 10/25/07 (G) Polycarboxylate,
modified sodium salt
P-07-0448 10/29/07 10/16/07 (G) Secondary amine adduct
P-07-0495 11/09/07 10/19/07 (G) Amino substituted
benzoic acid
P-07-0498 11/26/07 11/06/07 (S) 2-propenoic acid, 2-
methyl-, butyl ester,
polymer with 2-ethylhexyl
2-propenoate, 2-
methylpropyl 2-methyl-2-
propenoate and 1,2-
propanediol mono(2-methyl-
2-propenoate), tert-bu
3,5,5-
trimethylhexaneperoxoate-
initiated
P-07-0519 11/01/07 10/05/07 (G) Aminobenzene
P-07-0525 11/05/07 10/21/07 (G) Fatty acids,
hydrogenated, reaction
products with
tetraethylenepentamine,
aliphatic carboxylate
P-07-0529 10/31/07 10/18/07 (G) 2-propenoic acid, 2-
methyl-, telomer with 1-
alkylthiol, alkyl 2-
propenoate and alkyl 2-
methyl-2-propenoate,
ammonium salt
P-07-0539 11/20/07 11/15/07 (G) Epoxy acrylic resin
P-07-0560 10/29/07 10/19/07 (G) Acrylate modified
acrylonitrile, butadiene,
styrene polymer
P-07-0561 11/06/07 10/23/07 (G) Metal salt of styrene
acrylic copolymer
P-07-0569 11/26/07 10/29/07 (S) Siloxanes and
silicones, di-me, me [(2-
methyl-1-oxo-2-propen-1-
yl)oxy]methyl,
[(methoxymethyl[[(2-
methyl-1-oxo-2-propen-1-
yl)oxy]methyl)silyl]oxy]-
terminated
P-07-0630 11/30/07 11/27/07 (G) Polyester polyether
urethane block copolymer
P-99-0303 11/30/07 11/27/07 (G) N-butyl, 2-ethylhexyl
acrylate copolymer
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: January 14, 2008.
Chandler Sirmons,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. E8-1003 Filed 1-22-08; 8:45 am]
BILLING CODE 6560-50-S