[Federal Register Volume 72, Number 243 (Wednesday, December 19, 2007)]
[Notices]
[Pages 71877-71879]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E7-24626]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[C-580-835]


Stainless Steel Sheet and Strip in Coils from the Republic of 
Korea: Rescission of Countervailing Duty Administrative Review

AGENCY: Import Administration, International Trade Administration, 
Department of Commerce.
SUMMARY: In response to a request from Dai Yang Metal Co., Ltd. (DMC), 
the Department of Commerce (the Department) initiated an administrative 
review of the countervailing duty (CVD) order on stainless steel sheet 
and strip in coils from the Republic of Korea (Korea). This review 
covers imports of subject merchandise from DMC, for the period of 
review (POR) January 1, 2006, through December 31, 2006. On November 2, 
2007, DMC withdrew its request for an administrative review. No other 
parties requested a review. The Department is now rescinding this 
administrative review.

EFFECTIVE DATE: December 19, 2007.

FOR FURTHER INFORMATION CONTACT: Preeti Tolani, AD/CVD Operations, 
Office 3, Import Administration, International Trade Administration, 
U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, 
Washington, DC 20230; telephone: 202-482-0395.

SUPPLEMENTARY INFORMATION:

Background

    On August 6, 1999, the Department published in the Federal Register 
the CVD order on stainless steel sheet and strip in coils from Korea. 
See Amended Final Determination: Stainless Steel Sheet and Strip in 
Coils from the Republic of Korea; and Notice of Countervailing Duty 
Orders: Stainless Steel Sheet and Strip from France, Italy and the 
Republic of Korea, 64 FR 42923 (August 6, 1999). On August 2, 2007, the 
Department published in the Federal Register a notice of opportunity to 
request an administrative review of the CVD order on stainless steel 
sheet and strip in coils from Korea. See 72 FR 42383. On August 31, 
2007, DMC, a producer of the subject merchandise, requested an 
administrative review of the CVD order referenced above. On September 
25, 2007, the Department published in the Federal Register the 
initiation of this CVD administrative review. See Initiation of 
Antidumping and Countervailing Duty Administrative Reviews and Requests 
for Revocation in Part, 72 FR 54428 (September 25, 2007).

Scope of Order

    The merchandise covered by this order is stainless steel sheet and 
strip in coils from Korea. Stainless steel is an alloy steel 
containing, by weight, 1.2 percent or less of carbon and 10.5 percent 
or more of chromium, with or without other elements. The subject sheet 
and strip is a flat-rolled product in coils that is greater than 9.5 mm 
in width and less than 4.75 mm in thickness, and that is annealed or 
otherwise heat treated and pickled or otherwise descaled. The subject 
sheet and strip may also be further processed (e.g., cold-rolled, 
polished, aluminized, coated, etc.) provided that it maintains the 
specific dimensions of sheet and strip following such processing.
    The merchandise subject to this order is classified in the 
Harmonized Tariff Schedule of the United States (HTS) at subheadings: 
7219.13.00.30, 7219.13.00.50, 7219.13.00.70, 7219.13.00.80, 
7219.14.00.30, 7219.14.00.65, 7219.14.00.90, 7219.32.00.05, 
7219.32.00.20, 7219.32.00.25, 7219.32.00.35, 7219.32.00.36, 
7219.32.00.38, 7219.32.00.42, 7219.32.00.44, 7219.33.00.05, 
7219.33.00.20, 7219.33.00.25, 7219.33.00.35, 7219.33.00.36, 
7219.33.00.38, 7219.33.00.42, 7219.33.00.44, 7219.34.00.05, 
7219.34.00.20, 7219.34.00.25, 7219.34.00.30, 7219.34.00.35, 
7219.35.00.05, 7219.35.00.15, 7219.35.00.30, 7219.35.00.35, 
7219.90.00.10, 7219.90.00.20, 7219.90.00.25, 7219.90.00.60, 
7219.90.00.80, 7220.12.10.00, 7220.12.50.00, 7220.20.10.10, 
7220.20.10.15, 7220.20.10.60, 7220.20.10.80, 7220.20.60.05, 
7220.20.60.10, 7220.20.60.15, 7220.20.60.60, 7220.20.60.80, 
7220.20.70.05, 7220.20.70.10, 7220.20.70.15, 7220.20.70.60, 
7220.20.70.80, 7220.20.80.00, 7220.20.90.30, 7220.20.90.60, 
7220.90.00.10, 7220.90.00.15, 7220.90.00.60, and 7220.90.00.80. 
Although the HTS subheadings are provided for convenience and customs 
purposes, the Department's written description of the merchandise 
subject to this order is dispositive.
    Excluded from the scope of this order are the following: (1) sheet 
and strip that is not annealed or otherwise heat treated and pickled or 
otherwise descaled, (2) sheet and strip that is cut to length, (3) 
plate (i.e., flat-rolled stainless steel products of a thickness of 
4.75 mm or more), (4) flat wire (i.e., cold-rolled sections, with a 
prepared edge, rectangular in shape, of a width of not more than 9.5 
mm), and (5) razor blade steel. Razor blade steel is a flat-rolled 
product of stainless steel, not further worked than cold-rolled (cold-
reduced), in coils, of a width of not more than 23 mm and a thickness 
of 0.266 mm or less, containing, by weight, 12.5 to 14.5 percent 
chromium, and certified at the time of entry to be used in the 
manufacture of razor blades. See Chapter 72 of the HTS, ``Additional 
U.S. Note'' 1(d).
    In response to comments by interested parties, the Department has 
determined that certain specialty stainless steel products are also 
excluded from the scope of this order. These excluded products are 
described below.
    Flapper valve steel is defined as stainless steel strip in coils 
containing, by weight, between 0.37 and 0.43 percent carbon, between 
1.15 and 1.35 percent molybdenum, and between 0.20 and 0.80 percent 
manganese. This steel also contains, by weight, phosphorus of 0.025 
percent or less, silicon of between 0.20 and 0.50 percent, and sulfur 
of 0.020 percent or less. The product is manufactured by means of 
vacuum arc

[[Page 71878]]

remelting, with inclusion controls for sulphide of no more than 0.04 
percent and for oxide of no more than 0.05 percent. Flapper valve steel 
has a tensile strength of between 210 and 300 ksi, yield strength of 
between 170 and 270 ksi, plus or minus 8 ksi, and a hardness (Hv) of 
between 460 and 590. Flapper valve steel is most commonly used to 
produce specialty flapper valves in compressors.
    Also excluded is a product referred to as suspension foil, a 
specialty steel product used in the manufacture of suspension 
assemblies for computer disk drives. Suspension foil is described as 
302/304 grade or 202 grade stainless steel of a thickness between 14 
and 127 microns, with a thickness tolerance of plus-or-minus 2.01 
microns, and surface glossiness of 200 to 700 percent Gs. Suspension 
foil must be supplied in coil widths of not more than 407 mm, and with 
a mass of 225 kg or less. Roll marks may only be visible on one side, 
with no scratches of measurable depth. The material must exhibit 
residual stresses of 2 mm maximum deflection, and flatness of 1.6 mm 
over 685 mm length.
    Certain stainless steel foil for automotive catalytic converters is 
also excluded from the scope of this order. This stainless steel strip 
in coils is a specialty foil with a thickness of between 20 and 110 
microns used to produce a metallic substrate with a honeycomb structure 
for use in automotive catalytic converters. The steel contains, by 
weight, carbon of no more than 0.030 percent, silicon of no more than 
1.0 percent, manganese of no more than 1.0 percent, chromium of between 
19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of 
no more than 0.045 percent, sulfur of no more than 0.03 percent, 
lanthanum of less than 0.002 or greater than 0.05 percent, and total 
rare earth elements of more than 0.06 percent, with the balance iron.
    Permanent magnet iron-chromium-cobalt alloy stainless strip is also 
excluded from the scope of this order. This ductile stainless steel 
strip contains, by weight, 26 to 30 percent chromium, and 7 to 10 
percent cobalt, with the remainder of iron, in widths 228.6 mm or less, 
and a thickness between 0.127 and 1.270 mm. It exhibits magnetic 
remanence between 9,000 and 12,000 gauss, and a coercivity of between 
50 and 300 oersteds. This product is most commonly used in electronic 
sensors and is currently available under proprietary trade names such 
as ``Arnokrome III.''\1\
---------------------------------------------------------------------------

    \1\ ``Arnokrome III'' is a trademark of the Arnold Engineering 
Company.
---------------------------------------------------------------------------

    Certain electrical resistance alloy steel is also excluded from the 
scope of this order. This product is defined as a non-magnetic 
stainless steel manufactured to American Society of Testing and 
Materials (ASTM) specification B344 and containing, by weight, 36 
percent nickel, 18 percent chromium, and 46 percent iron, and is most 
notable for its resistance to high temperature corrosion. It has a 
melting point of 1390 degrees Celsius and displays a creep rupture 
limit of 4 kilograms per square millimeter at 1000 degrees Celsius. 
This steel is most commonly used in the production of heating ribbons 
for circuit breakers and industrial furnaces, and in rheostats for 
railway locomotives. The product is currently available under 
proprietary trade names such as ``Gilphy 36.''\2\
---------------------------------------------------------------------------

    \2\ ``Gilphy 36'' is a trademark of Imphy, S.A.
---------------------------------------------------------------------------

    Certain martensitic precipitation-hardenable stainless steel is 
also excluded from the scope of this order. This high-strength, ductile 
stainless steel product is designated under the Unified Numbering 
System (UNS) as S45500-grade steel, and contains, by weight, 11 to 13 
percent chromium, and 7 to 10 percent nickel. Carbon, manganese, 
silicon and molybdenum each comprise, by weight, 0.05 percent or less, 
with phosphorus and sulfur each comprising, by weight, 0.03 percent or 
less. This steel has copper, niobium, and titanium added to achieve 
aging, and will exhibit yield strengths as high as 1700 Mpa and 
ultimate tensile strengths as high as 1750 Mpa after aging, with 
elongation percentages of 3 percent or less in 50 mm. It is generally 
provided in thicknesses between 0.635 and 0.787 mm, and in widths of 
25.4 mm. This product is most commonly used in the manufacture of 
television tubes and is currently available under proprietary trade 
names such as ``Durphynox 17.''\3\
---------------------------------------------------------------------------

    \3\ ``Durphynox 17'' is a trademark of Imphy, S.A.
---------------------------------------------------------------------------

    Finally, three specialty stainless steels typically used in certain 
industrial blades and surgical and medical instruments are also 
excluded from the scope of this order. These include stainless steel 
strip in coils used in the production of textile cutting tools (e.g., 
carpet knives).\4\ This steel is similar to AISI grade 420 but 
containing, by weight, 0.5 to 0.7 percent of molybdenum. The steel also 
contains, by weight, carbon of between 1.0 and 1.1 percent, sulfur of 
0.020 percent or less, and includes between 0.20 and 0.30 percent 
copper and between 0.20 and 0.50 percent cobalt. This steel is sold 
under proprietary names such as ``GIN4 Mo.'' The second excluded 
stainless steel strip in coils is similar to AISI 420-J2 and contains, 
by weight, carbon of between 0.62 and 0.70 percent, silicon of between 
0.20 and 0.50 percent, manganese of between 0.45 and 0.80 percent, 
phosphorus of no more than 0.025 percent and sulfur of no more than 
0.020 percent. This steel has a carbide density on average of 100 
carbide particles per 100 square microns. An example of this product is 
``GIN5'' steel. The third specialty steel has a chemical composition 
similar to AISI 420 F, with carbon of between 0.37 and 0.43 percent, 
molybdenum of between 1.15 and 1.35 percent, but lower manganese of 
between 0.20 and 0.80 percent, phosphorus of no more than 0.025 
percent, silicon of between 0.20 and 0.50 percent, and sulfur of no 
more than 0.020 percent. This product is supplied with a hardness of 
more than Hv 500 guaranteed after customer processing, and is supplied 
as, for example, ``GIN6''.\5\
---------------------------------------------------------------------------

    \4\ This list of uses is illustrative and provided for 
descriptive purposes only.
    \5\ ``GIN4 Mo,'' ``GIN5'' and ``GIN6'' are the proprietary 
grades of Hitachi Metals America, Ltd.
---------------------------------------------------------------------------

Rescission of Review

    A party that requests an administrative review may withdraw the 
request within 90 days after the date of publication of the notice of 
initiation of the requested administrative review. See 19 CFR 
351.213(d)(1). On November 2, 2007, DMC timely withdrew its request for 
an administrative review. Therefore, the Department is rescinding the 
administrative review of the CVD order on stainless steel sheet and 
strip in coils from Korea covering the period January 1, 2006, through 
December 31, 2006. The Department will issue appropriate assessment 
instructions directly to U.S. Customs and Border Protection 15 days 
after the date of publication of this notice.
    This notice serves as a reminder to parties subject to 
administrative protective order (APO) of their responsibility 
concerning the disposition of proprietary information disclosed under 
APO in accordance with section 351.305(a)(3) of the Department's 
regulations. Timely written notification of the return/destruction of 
APO materials or conversion to judicial protective order is hereby 
requested. Failure to comply with the regulations and the terms of an 
APO is a sanctionable violation.

[[Page 71879]]

    This notice is issued and published in accordance with section 
777(i)(1) of the Tariff Act of 1930, as amended, and 19 CFR 
351.213(d)(4).

    Dated: December 12, 2007.
Stephen J. Claeys,
Deputy Assistant Secretaryfor Import Administration.
[FR Doc. E7-24626 Filed 12-18-07; 8:45 am]
BILLING CODE 3510-DS-S