[Federal Register Volume 72, Number 203 (Monday, October 22, 2007)]
[Notices]
[Pages 59588-59589]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E7-20775]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

National Highway Traffic Safety Administration

[Docket No. NHTSA-2007-0005]


Notice of Receipt of Petition for Decision That Nonconforming 
2004-2005 Vespa LX and PX Model Motorcycles Are Eligible for 
Importation

AGENCY: National Highway Traffic Safety Administration, DOT.

ACTION: Notice of receipt of petition for decision that nonconforming 
2004-2005 Vespa LX and PX model motorcycles are eligible for 
importation.

-----------------------------------------------------------------------

SUMMARY: This document announces receipt by the National Highway 
Traffic Safety Administration (NHTSA) of a petition for a decision that 
2004-2005 Vespa LX and PX model motorcycles that were not originally 
manufactured to comply with all applicable Federal motor vehicle safety 
standards (FMVSS) are eligible for importation into the United States 
because (1) they are substantially similar to vehicles that were 
originally manufactured for sale in the United States and that were 
certified by their manufacturer as complying with the safety standards, 
and (2) they are capable of being readily altered to conform to the 
standards.

DATES: The closing date for comments on the petition is November 21, 
2007.

ADDRESSES: Comments should refer to the docket and notice numbers above 
and be submitted by any of the following methods:
     Federal eRulemaking Portal: Go to http://www.regulations.gov. Follow the online instructions for submitting 
comments.
     Mail: Docket Management Facility: U.S. Department of 
Transportation, 1200 New Jersey Avenue, SE., West Building Ground 
Floor, Room W12-140, Washington, DC 20590-0001.
     Hand Delivery or Courier: West Building Ground Floor, Room 
W12-140, 1200 New Jersey Avenue, SE., between 9 a.m. and 5 p.m. ET, 
Monday through Friday, except Federal holidays.
     Fax: 202-493-2251.
    Instructions: Comments must be written in the English language, and 
be no greater than 15 pages in length, although there is no limit to 
the length of necessary attachments to the comments. If comments are 
submitted in hard copy form, please ensure that two copies are 
provided. If you wish to receive confirmation that your comments were 
received, please enclose a stamped, self-addressed postcard with the 
comments. Note that all comments received will be posted without change 
to http://www.regulations.gov, including any personal information 
provided. Please see the Privacy Act heading below.
    Privacy Act: Anyone is able to search the electronic form of all 
comments received into any of our dockets by the name of the individual 
submitting the comment (or signing the comment, if submitted on behalf 
of an association, business, labor union, etc.). You may review DOT's 
complete Privacy Act Statement in the Federal Register published on 
April 11, 2000 (65 FR 19477-78) or you may visit http://DocketInfo.dot.gov.
    How to Read Comments submitted to the Docket: You may read the 
comments received by Docket Management at the address and times given 
above. You may also see the comments on the Internet. To read the 
comments on the Internet, take the following steps:
    (1) Go to the Federal Docket Management System (FDMS) Web page 
http://www.regulations.gov.
    (2) On that page, click on ``search for dockets.''
    (3) On the next page (http://www.regulations.gov/fdmspublic/component/main), select NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION 
from the drop-down menu in the Agency field, enter the Docket ID number 
and title shown at the heading of this document, and select 
``Nonrulemaking'' from the drop-down menu in the Type field and 
``Vehicle Import Eligibility'' in the drop-down menu in the Sub-Type 
field.
    (4) After entering that information, click on ``submit.''
    (5) The next page contains docket summary information for the 
docket you selected. Click on the comments you wish to see. You may 
download the comments. Although the comments are imaged documents, 
instead of the word processing documents, the ``pdf'' versions of the 
documents are word searchable. Please note that even after the comment 
closing date, we will continue to file relevant information in the 
Docket as it becomes available. Further, some people may submit late 
comments. Accordingly, we recommend that you periodically search the 
Docket for new material.

FOR FURTHER INFORMATION CONTACT: Coleman Sachs, Office of Vehicle 
Safety Compliance, NHTSA (202-366-3151).

SUPPLEMENTARY INFORMATION:

Background

    Under 49 U.S.C. 30141(a)(1)(A), a motor vehicle that was not 
originally manufactured to conform to all applicable FMVSS shall be 
refused admission into the United States unless NHTSA has decided that 
the motor vehicle is substantially similar to a motor vehicle 
originally manufactured for sale in the United States, certified under 
49 U.S.C. 30115, and of the same model year as the model of the motor 
vehicle to be compared, and is capable of being readily altered to 
conform to all applicable FMVSS.
    Petitions for eligibility decisions may be submitted by either 
manufacturers or importers who have registered with NHTSA pursuant to 
49 CFR part 592. As specified in 49 CFR 593.7, NHTSA publishes notice 
in the Federal Register of each petition that it receives, and affords 
interested persons an opportunity to comment on the petition. At the 
close of the comment period, NHTSA decides, on the basis of the 
petition and any comments that it has received, whether the vehicle is 
eligible for importation. The agency then publishes this decision in 
the Federal Register.
    J.K. Technologies, LLC, of Baltimore, Maryland (``J.K.'') 
(Registered Importer 90-006) has petitioned NHTSA to decide whether 
non-U.S. certified 2004-

[[Page 59589]]

2005 Vespa LX and PX model motorcycles are eligible for importation 
into the United States. The vehicles that J.K. believes are 
substantially similar are 2004-2005 Vespa LX and PX model motorcycles 
that were manufactured for sale in the United States and certified by 
their manufacturer as conforming to all applicable FMVSS.
    The petitioner claims that it carefully compared non-U.S. certified 
2004-2005 Vespa LX and PX model motorcycles to their U.S. certified 
counterparts, and found the vehicles to be substantially similar with 
respect to compliance with most FMVSS.
    J.K. submitted information with its petition intended to 
demonstrate that non-U.S. certified 2004-2005 Vespa LX and PX model 
motorcycles, as originally manufactured, conform to many FMVSS in the 
same manner as their U.S. certified counterparts, or are capable of 
being readily altered to conform to those standards.
    Specifically, the petitioner claims that non-U.S. certified 2004-
2005 Vespa LX and PX model motorcycles are identical to their U.S. 
certified counterparts with respect to compliance with Standard Nos. 
106 Brake Hoses, 116 Brake Fluid, 119 New Pneumatic Tires for Vehicles 
other than Passenger Cars, 120 Tire Selection and Rims for Vehicles 
other than Passenger Cars, and 122 Motorcycle Brake Systems.
    The petitioner further contends that the vehicles are capable of 
being readily altered to meet the following standards, in the manner 
indicated below:
    Standard No. 108 Lamps, Reflective Devices and Associated 
Equipment: Installation of the following U.S.-certified components on 
vehicles not already so equipped: (a) Headlamps; (b) front and rear 
side-mounted reflex reflectors; and (c) rear-mounted reflex reflector.
    Standard No. 111 Rearview Mirrors: Inspection of all vehicles, and 
installation of U.S.-model rearview mirrors on vehicles that are not 
already so equipped.
    Standard No. 123 Motorcycle Controls and Displays: Installation of 
a U.S.-model instrument cluster to meet the requirements of this 
standard.
    Standard No. 205 Glazing Materials: Inspection of all vehicles, and 
removal of noncompliant glazing or replacement of the glazing with 
U.S.-certified components on vehicles that are not already so equipped.
    All comments received before the close of business on the closing 
date indicated above will be considered, and will be available for 
examination in the docket at the above address both before and after 
that date. To the extent possible, comments filed after the closing 
date will also be considered. Notice of final action on the petition 
will be published in the Federal Register pursuant to the authority 
indicated below.

    Authority: 49 U.S.C. 30141(a)(1)(A) and (b)(1); 49 CFR 593.8; 
delegations of authority at 49 CFR 1.50 and 501.8.

    Issued on: October 16, 2007.
Claude H. Harris,
Director, Office of Vehicle Safety Compliance.
[FR Doc. E7-20775 Filed 10-19-07; 8:45 am]
BILLING CODE 4910-59-P