[Federal Register Volume 72, Number 25 (Wednesday, February 7, 2007)]
[Rules and Regulations]
[Page 5632]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E7-1993]


-----------------------------------------------------------------------

FEDERAL COMMUNICATIONS COMMISSION

47 CFR Part 15

[ET Docket No. 03-201; FCC 04-165]


Unlicensed Devices and Equipment Approval

AGENCY: Federal Communications Commission.

ACTION: Correcting amendment.

-----------------------------------------------------------------------

SUMMARY: On September 7, 2004, the Commission released a Report and 
Order in the matter of ``Unlicensed Devices and Equipment Approval.'' 
This document contains corrections to the final regulations that 
appeared in the Federal Register of September 7, 2004 (69 FR 54027).

DATES: Effective October 7, 2004.

FOR FURTHER INFORMATION CONTACT: Nancy J. Brooks, Office of Engineering 
and Technology, (202) 418-2454.

SUPPLEMENTARY INFORMATION: 

Background

    The final regulations that are the subject of this correction 
relate to ``Unlicensed Devices and Equipment Approval'' under Sec.  
15.247 of the rules.

Need for Correction

    As published, the final regulations contain an error, which 
requires immediate correction.

List of Subjects in 47 CFR Part 15

    Communications equipment.

0
Accordingly, 47 CFR part 15 is corrected by making the following 
correcting amendments:

PART 15--RADIO FREQUENCY DEVICES

0
1. The authority citation for part 15 continues to read as follows

    Authority: 47 U.S.C. 154, 302a, 303, 304, 307, 336, and 544A.


Sec.  15.247  [Amended]

0
2. Section 15.247 is amended by removing paragraph (b)(5) and by 
revising paragraph (e) and by adding paragraph (i) to read as follows:
* * * * *
    (e) For digitally modulated systems, the power spectral density 
conducted from the intentional radiator to the antenna shall not be 
greater than 8 dBm in any 3 kHz band during any time interval of 
continuous transmission. This power spectral density shall be 
determined in accordance with the provisions of paragraph (b) of this 
section. The same method of determining the conducted output power 
shall be used to determine the power spectral density.
* * * * *
    (i) Systems operating under the provisions of this section shall be 
operated in a manner that ensures that the public is not exposed to 
radio frequency energy levels in excess of the Commission's guidelines. 
See Sec.  1.1307(b)(1) of this chapter.
* * * * *

Federal Communications Commission.
Marlene H. Dortch,
Secretary.
 [FR Doc. E7-1993 Filed 2-6-07; 8:45 am]
BILLING CODE 6712-01-P