[Federal Register Volume 72, Number 16 (Thursday, January 25, 2007)]
[Notices]
[Pages 3423-3425]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E7-1070]


-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Employment and Training Administration


Notice of Determinations Regarding Eligibility To Apply for 
Worker Adjustment Assistance and Alternative Trade Adjustment 
Assistance

    In accordance with Section 223 of the Trade Act of 1974, as amended 
(19 U.S.C. 2273) the Department of Labor herein presents summaries of 
determinations regarding eligibility to apply for trade adjustment 
assistance for workers (TA-W) number and alternative trade adjustment 
assistance (ATAA) by (TA-W) number issued during the period of January 
8 through January 12, 2007.
    In order for an affirmative determination to be made for workers of 
a primary firm and a certification issued regarding eligibility to 
apply for worker adjustment assistance, each of the group eligibility 
requirements of Section 222(a) of the Act must be met.
    I. Section (a)(2)(A), all of the following must be satisfied:
    A. A significant number or proportion of the workers in such 
workers' firm, or an appropriate subdivision of the firm, have become 
totally or partially separated, or are threatened to become totally or 
partially separated;
    B. The sales or production, or both, of such firm or subdivision 
have decreased absolutely; and
    C. Increased imports of articles like or directly competitive with 
articles produced by such firm or subdivision have contributed 
importantly to such workers' separation or threat of separation and to 
the decline in sales or production of such firm or subdivision; or
    II. Section (a)(2)(B), both of the following must be satisfied:
    A. A significant number or proportion of the workers in such 
workers' firm, or an appropriate subdivision of the firm, have become 
totally or partially separated, or are threatened to become totally or 
partially separated;
    B. There has been a shift in production by such workers' firm or 
subdivision to a foreign country of articles like or directly 
competitive with articles which are produced by such firm or 
subdivision; and
    C. One of the following must be satisfied:
    1. The country to which the workers' firm has shifted production of 
the articles is a party to a free trade agreement with the United 
States;
    2. The country to which the workers' firm has shifted production of 
the articles to a beneficiary country under the Andean Trade Preference 
Act, African Growth and Opportunity Act, or the Caribbean Basin 
Economic Recovery Act; or
    3. There has been or is likely to be an increase in imports of 
articles that are like or directly competitive with articles which are 
or were produced by such firm or subdivision.
    Also, in order for an affirmative determination to be made for 
secondarily affected workers of a firm and a certification issued 
regarding eligibility to apply for worker adjustment assistance, each 
of the group eligibility requirements of Section 222(b) of the Act must 
be met.
    (1) Significant number or proportion of the workers in the workers' 
firm or an appropriate subdivision of the firm have become totally or 
partially separated, or are threatened to become totally or partially 
separated;
    (2) The workers' firm (or subdivision) is a supplier or downstream 
producer to a firm (or subdivision) that employed a group of workers 
who received a certification of eligibility to apply for trade 
adjustment assistance benefits, and such supply or production is 
related to the article that was the basis for such certification; and
    (3) Either--
    (A) The workers' firm is a supplier and the component parts it 
supplied for the firm (or subdivision) described in paragraph (2) 
accounted for at least 20

[[Page 3424]]

percent of the production or sales of the workers' firm; or
    (B) A loss of business by the workers' firm with the firm (or 
subdivision) described in paragraph (2) contributed importantly to the 
workers' separation or threat of separation.
    In order for the Division of Trade Adjustment Assistance to issue a 
certification of eligibility to apply for Alternative Trade Adjustment 
Assistance (ATAA) for older workers, the group eligibility requirements 
of Section 246(a)(3)(A)(ii) of the Trade Act must be met.
    1. Whether a significant number of workers in the workers' firm are 
50 years of age or older.
    2. Whether the workers in the workers' firm possess skills that are 
not easily transferable.
    3. The competitive conditions within the workers' industry (i.e., 
conditions within the industry are adverse).

Affirmative Determinations for Worker Adjustment Assistance

    The following certifications have been issued. The date following 
the company name and location of each determination references the 
impact date for all workers of such determination.
    The following certifications have been issued. The requirements of 
Section 222(a)(2)(A) (increased imports) of the Trade Act have been 
met.

None.

The following certifications have been issued. The requirements of 
Section 222(a)(2)(B) (shift in production) of the Trade Act have been 
met.

TA-W-60,620; Point Technologies, A Subsidiary of Angiotech 
Pharmaceuticals, Wheeling, IL: November 17, 2005.

    The following certifications have been issued. The requirements of 
Section 222(b) (supplier to a firm whose workers are certified eligible 
to apply for TAA) of the Trade Act have been met.

None.

    The following certifications have been issued. The requirements of 
Section 222(b) (downstream producer for a firm whose workers are 
certified eligible to apply for TAA based on increased imports from or 
a shift in production to Mexico or Canada) of the Trade Act have been 
met.

None.

Affirmative Determinations for Worker Adjustment Assistance and 
Alternative Trade Adjustment Assistance

    The following certifications have been issued. The date following 
the company name and location of each determination references the 
impact date for all workers of such determination.
    The following certifications have been issued. The requirements of 
Section 222(a)(2)(A) (increased imports) and Section 246(a)(3)(A)(ii) 
of the Trade Act have been met.

TA-W-60,535; Broyhill Furniture Industries, Inc., Lenoir Furniture 
Corporation, Lenoir, NC: September 11, 2006.
TA-W-60,545; Nice Systems, Inc., Public Safety Division, Shelton, CT: 
December 5, 2005.
TA-W-60,585; A.M. Todd Company, Botanical Therapeutics, Eugene, OR: 
December 11, 2005.
TA-W-60,588; Clayson Knitting Company, Inc., Star, NC: October 26, 
2006.
TA-W-60,601; Weyerhaeuser Company, Mountain Pine, AR: December 12, 
2005.
TA-W-60,605; Robetex, Inc., Lumberton, NC: October 2, 2005.
TA-W-60,645; Diamond Back, Inc., A Subsidiary of Cortland Line Co., 
Morrisville, VT: December 15, 2005.
TA-W-60,673; Manthei, Inc., Petoskey, MI: December 27, 2005.
TA-W-60,240; Georgia Pacific Corporation, Consumer Products Division, 
Camas, WA: October 10, 2005.
TA-W-60,482; Du-Co Ceramics Co., Saxonburg, PA: December 3, 2005.
TA-W-60,509; K-C Fish Company, Inc., Blaine, WA: November 29, 2005.
TA-W-60,521; P.H. Precision Products Corp., Pembroke, NH: November 28, 
2005.
TA-W-60,532; Auburn Apparel, Inc., Auburn, PA: December 6, 2005.
TA-W-60,547; Enterprise Tool and Die, Grandville, MI: November 29, 
2005.
TA-W-60,563; General Chemical Performance Products, Gibbstown, NJ: 
December 6, 2005.
TA-W-60,579; Dana Corporation, Including On-Site Leased Workers of 
Adecco, Danville, KY: November 22, 2005
TA-W-60,602; Photocircuits Corporation, Glen Cove, NY: December 2, 
2005.
TA-W-60,348; Del Monte Fresh Produce (Hawaii) Inc., Kunia, HI: October 
30, 2005.

    The following certifications have been issued. The requirements of 
Section 222(a)(2)(B) (shift in production) and Section 246(a)(3)(A)(ii) 
of the Trade Act have been met.

TA-W-60,389; Starkey Laboratories, Inc., Glencoe Division, Glencoe, MN: 
January 5, 2007.
TA-W-60,463; Cott Beverages Wyomissing, Inc., Wyomissing, PA: November 
20, 2005.
TA-W-60,543; Edscha Jackson, Inc., Leased Workers of Autotek, Bartech 
and Accountemps, Jackson, MI: December 5, 2005.
TA-W-60,553; Graftech International, A Division of UCAR Carbon Company, 
Clarksville, TN: December 7, 2005.
TA-W-60,587; Federal Mogul Corporation, Sealing Systems Division, Van 
Wert, OH: December 11, 2005.
TA-W-60,615; York Group Metal Casket Assembly (The), Matthews Casket 
Division, Marshfield, MO: December 12, 2005.
TA-W-60,632; Pfizer, Inc., Global Manufacturing Division, Holland, MI: 
December 15, 2005.
TA-W-60,643; Hutchings Automotive Products, Inc., Grand Blanc, MI: 
December 14, 2005.
TA-W-60,661; Lear Corporation, Seating Systems Division, Janesville 
Plant, Janesville, WI: December 21, 2005.
TA-W-60,708; Hooven Allison, LLC, Madison, GA: December 29, 2005.
TA-W-60,716; A.O. Smith Corporation, Electrical Products Division, 
Mebane, NC: January 4, 2006.
TA-W-60,559; ESCO Company Limited Partnership, Muskegon, MI: December 
7, 2005.
TA-W-60,593; Paul Lavitt Mills, Inc., Lincolnton, NC: December 12, 
2005.
TA-W-60,613; Stanley Furniture Company, Robbinsville Plant, 
Robbinsville, NC: December 13, 2005.
TA-W-60,666; Spaulding Composites, Inc., DeKalb, IL: December 21, 2005.
TA-W-60,692; Anaheim Manufacturing Co., A Subsidiary of Western 
Industries, Anaheim, CA: September 25, 2006.

    The following certifications have been issued. The requirements of 
Section 222(b) (supplier to a firm whose workers are certified eligible 
to apply for TAA) and Section 246(a)(3)(A)(ii) of the Trade Act have 
been met.

TA-W-60,459; Sandusky Athol International, Sandusky Limited, Sandusky, 
OH: November 20, 2005.

    The following certifications have been issued. The requirements of 
Section 222(b) (downstream producer for a firm whose workers are 
certified eligible to apply for TAA based on increased imports from or 
a shift in production to Mexico or Canada) and Section 246(a)(3)(A)(ii) 
of the Trade Act have been met.

TA-W-60,552; American Specialty Cars (ASC), Inc., Livonia 04, Livonia, 
MI: December 5, 2005.

[[Page 3425]]

Negative Determinations for Alternative Trade Adjustment Assistance

    In the following cases, it has been determined that the 
requirements of 246(a)(3)(A)(ii) have not been met for the reasons 
specified.
    The Department has determined that criterion (1) of Section 246 has 
not been met. Workers at the firm are 50 years of age or older.

None.

    The Department has determined that criterion (2) of Section 246 has 
not been met. Workers at the firm possess skills that are easily 
transferable.

TA-W-60,620; Point Technologies, a Subsidiary of Angiotech 
Pharmaceuticals, Wheeling, IL.
    The Department has determined that criterion (3) of Section 246 has 
not been met. Competition conditions within the workers' industry are 
not adverse.

None.

Negative Determinations for Worker Adjustment Assistance and 
Alternative Trade Adjustment Assistance

    In the following cases, the investigation revealed that the 
eligibility criteria for worker adjustment assistance have not been met 
for the reasons specified.
    Because the workers of the firm are not eligible to apply for TAA, 
the workers cannot be certified eligible for ATAA.
    The investigation revealed that criteria (a)(2)(A)(I.A.) and 
(a)(2)(B)(II.A.) (employment decline) have not been met.

TA-W-60,485; Lockheed Martin, Operations Manufacturing Group, Orlando, 
FL.
TA-W-60,595; Berkline Benchcraft, LLC, Blue Mountain, MS.

    The investigation revealed that criteria (a)(2)(A)(I.B.) (Sales or 
production, or both, did not decline) and (a)(2)(B)(II.B.) (shift in 
production to a foreign country) have not been met.

TA-W-60,549; Blue Holdings, Inc., Commerce, CA.
TA-W-60,693; Continental Connector Co., A Subsidiary ASC Group, Inc., 
Bloomfield, NJ.
    The investigation revealed that criteria (a)(2)(A)(I.C.) (increased 
imports) and (a)(2)(B)(II.B.) (shift in production to a foreign 
country) have not been met.

TA-W-59,974; Delphi Corporation, Automotive Holdings Group, New 
Brunswick, NJ.
TA-W-60,229; City Machine Tool and Die Co., Inc., Muncie, IN.
TA-W-60,420; Mesick Precision Co., Inc., Mesick, MI.
TA-W-60,519; Sun Chemical Corporation, Flush Department, Muskegon, MI.
TA-W-60,524; Eaton Paperboard Convertors, Booneville, MS.
TA-W-60,614; Weyerhaeuser Bardcor, CBPR Division, West Memphis, AR.
    The investigation revealed that the predominate cause of worker 
separations is unrelated to criteria (a)(2)(A)(I.C.) (increased 
imports) and (a)(2)(B)(II.C) (shift in production to a foreign country 
under a free trade agreement or a beneficiary country under a 
preferential trade agreement, or there has been or is likely to be an 
increase in imports).

None.

    The workers' firm does not produce an article as required for 
certification under Section 222 of the Trade Act of 1974.

TA-W-60,477; American Uniform Company, Headquarters Cleveland, 
Cleveland, TN.
TA-W-60,551; Haggar Clothing Company, Technical Design Division, 
Dallas, TX.
TA-W-60,558; Supervalu, Inc., Pleasant Prairie Distribution Center, 
Pleasant Prairie, WI.
TA-W-60,574; Finegood Moldings, Inc., Carson, CA.
TA-W-60,581; Jeanne Skin Care Cosmetics, Ltd., New York, NY.
    The investigation revealed that criteria of Section 222(b)(2) has 
not been met. The workers' firm (or subdivision) is not a supplier to 
or a downstream producer for a firm whose workers were certified 
eligible to apply for TAA.

None.

    I hereby certify that the aforementioned determinations were issued 
during the period of January 8 through January 12, 2007. Copies of 
these determinations are available for inspection in Room C-5311, U.S. 
Department of Labor, 200 Constitution Avenue, NW., Washington, DC 20210 
during normal business hours or will be mailed to persons who write to 
the above address.

    Dated: January 18, 2007.
Ralph Dibattista,
Director, Division of Trade Adjustment Assistance.
 [FR Doc. E7-1070 Filed 1-24-07; 8:45 am]
BILLING CODE 4510-30-P