[Federal Register Volume 72, Number 1 (Wednesday, January 3, 2007)]
[Notices]
[Pages 120-122]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E6-22494]


-----------------------------------------------------------------------

DEPARTMENT OF COMMERCE

International Trade Administration

[C-580-835]


Final Results of Countervailing Duty Administrative Review: 
Stainless Steel Sheet and Strip in Coils from the Republic of Korea

AGENCY: Import Administration, International Trade Administration, 
Department of Commerce.

Background:

    On August 28, 2006, the Department of Commerce (``the Department'') 
published in the Federal Register its preliminary results of 
administrative review of the countervailing duty (``CVD'') order on 
stainless steel sheet and strip in coils from the Republic of Korea 
(``Korea'') for the period January 1, 2004, through December 31, 2004. 
See Preliminary Results of Countervailing Duty Administrative Review: 
Stainless Steel Sheet and Strip in Coils from the Republic of Korea, 71 
FR 50866 (August 28, 2006) (``Preliminary Results''). The Department 
preliminarily found that Dai Yang Metal Co., Ltd. (``DMC''), the 
producer/exporter of subject merchandise covered by this review, had a 
de minimis net subsidy rate during the period of review (``POR''). We 
did not receive any comments on our preliminary results and have made 
no revisions to those results.

EFFECTIVE DATE: January 3, 2007.

FOR FURTHER INFORMATION CONTACT: Preeti Tolani, AD/CVD Operations, 
Office 3, Import Administration, International Trade Administration, 
U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, 
Washington, DC 20230; telephone: (202) 482-0395.

SUPPLEMENTARY INFORMATION:

Scope of the Order

    The products subject to this order are certain stainless steel 
sheet and strip in coils. Stainless steel is an alloy steel containing, 
by weight, 1.2 percent or less of carbon and 10.5 percent or more of 
chromium, with or without other elements. The subject sheet and strip 
is

[[Page 121]]

a flat-rolled product in coils that is greater than 9.5 mm in width and 
less than 4.75 mm in thickness and that is annealed or otherwise heat 
treated and pickled or otherwise descaled. The subject sheet and strip 
may also be further processed (e.g., cold-rolled, polished, aluminized, 
coated), provided that it maintains the specific dimensions of sheet 
and strip following such processing.
    The merchandise subject to this order is currently classifiable in 
the Harmonized Tariff Schedule of the United States (``HTSUS'') at 
subheadings: 7219.13.00.30, 7219.13.00.50, 7219.13.00.70, 
7219.13.00.80, 7219.14.00.30, 7219.14.00.65, 7219.14.00.90, 
7219.32.00.05, 7219.32.00.20, 7219.32.00.25, 7219.32.00.35, 
7219.32.00.36, 7219.32.00.38, 7219.32.00.42, 7219.32.00.44, 
7219.33.00.05, 7219.33.00.20, 7219.33.00.25, 7219.33.00.35, 
7219.33.00.36, 7219.33.00.38, 7219.33.00.42, 7219.33.00.44, 
7219.34.00.05, 7219.34.00.20, 7219.34.00.25, 7219.34.00.30, 
7219.34.00.35, 7219.35.00.05, 7219.35.00.15, 7219.35.00.30, 
7219.35.00.35, 7219.90.00.10, 7219.90.00.20, 7219.90.00.25, 
7219.90.00.60, 7219.90.00.80, 7220.12.10.00, 7220.12.50.00, 
7220.20.10.10, 7220.20.10.15, 7220.20.10.60, 7220.20.10.80, 
7220.20.60.05, 7220.20.60.10, 7220.20.60.15, 7220.20.60.60, 
7220.20.60.80, 7220.20.70.05, 7220.20.70.10, 7220.20.70.15, 
7220.20.70.60, 7220.20.70.80, 7220.20.80.00, 7220.20.90.30, 
7220.20.90.60, 7220.90.00.10, 7220.90.00.15, 7220.90.00.60, and 
7220.90.00.80. Although the HTSUS subheadings are provided for 
convenience and customs purposes, the Department's written description 
of the merchandise is dispositive.
    Excluded from the scope of this order are the following: (1) sheet 
and strip that is not annealed or otherwise heat treated and pickled or 
otherwise descaled, (2) sheet and strip that is cut to length, (3) 
plate (i.e., flat-rolled stainless steel products of a thickness of 
4.75 mm or more), (4) flat wire (i.e., cold-rolled sections, with a 
prepared edge, rectangular in shape, of a width of not more than 9.5 
mm), and (5) razor blade steel. Razor blade steel is a flat rolled 
product of stainless steel, not further worked than cold-rolled (cold-
reduced), in coils, of a width of not more than 23 mm and a thickness 
of 0.266 mm or less, containing, by weight, 12.5 to 14.5 percent 
chromium, and certified at the time of entry to be used in the 
manufacture of razor blades. See Chapter 72 of the HTSUS, ``Additional 
U.S. Note'' 1(d).
    The Department has determined that certain specialty stainless 
steel products are also excluded from the scope of this order. These 
excluded products are described below:
    Flapper valve steel is defined as stainless steel strip in coils 
containing, by weight, between 0.37 and 0.43 percent carbon, between 
1.15 and 1.35 percent molybdenum, and between 0.20 and 0.80 percent 
manganese. This steel also contains, by weight, phosphorus of 0.025 
percent or less, silicon of between 0.20 and 0.50 percent, and sulfur 
of 0.020 percent or less. The product is manufactured by means of 
vacuum arc remelting, with inclusion controls for sulphide of no more 
than 0.04 percent and for oxide of no more than 0.05 percent. Flapper 
valve steel has a tensile strength of between 210 and 300 ksi, yield 
strength of between 170 and 270 ksi, plus or minus 8 ksi, and a 
hardness (Hv) of between 460 and 590. Flapper valve steel is most 
commonly used to produce specialty flapper valves in compressors.
    Also excluded is a product referred to as suspension foil, a 
specialty steel product used in the manufacture of suspension 
assemblies for computer disk drives. Suspension foil is described as 
302/304 grade or 202 grade stainless steel of a thickness between 14 
and 127 microns, with a thickness tolerance of plus-or-minus 2.01 
microns, and surface glossiness of 200 to 700 percent Gs. Suspension 
foil must be supplied in coil widths of not more than 407 mm, and with 
a mass of 225 kg or less. Roll marks may only be visible on one side, 
with no scratches of measurable depth. The material must exhibit 
residual stresses of 2 mm maximum deflection, and flatness of 1.6 mm 
over 685 mm length.
    Certain stainless steel foil for automotive catalytic converters is 
also excluded from the scope of this order. This stainless steel strip 
in coils is a specialty foil with a thickness of between 20 and 110 
microns used to produce a metallic substrate with a honeycomb structure 
for use in automotive catalytic converters. The steel contains, by 
weight, carbon of no more than 0.030 percent, silicon of no more than 
1.0 percent, manganese of no more than 1.0 percent, chromium of between 
19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of 
no more than 0.045 percent, sulfur of no more than 0.03 percent, 
lanthanum of between 0.002 and 0.05 percent, and total rare earth 
elements of more than 0.06 percent, with the balance iron.
    Permanent magnet iron-chromium-cobalt alloy stainless strip is also 
excluded from the scope of this order. This ductile stainless steel 
strip contains, by weight, 26 to 30 percent chromium, and 7 to 10 
percent cobalt, with the remainder of iron, in widths 228.6 mm or less, 
and a thickness between 0.127 and 1.270 mm. It exhibits magnetic 
remanence between 9,000 and 12,000 gauss, and a coercivity of between 
50 and 300 oersteds. This product is most commonly used in electronic 
sensors and is currently available under proprietary trade names such 
as ``Arnokrome III.''\1\
---------------------------------------------------------------------------

    \1\ ``Arnokrome III'' is a trademark of the Arnold Engineering 
Company.
---------------------------------------------------------------------------

    Certain electrical resistance alloy steel is also excluded from the 
scope of this order. This product is defined as a non-magnetic 
stainless steel manufactured to American Society of Testing and 
Materials (``ASTM'') specification B344 and containing, by weight, 36 
percent nickel, 18 percent chromium, and 46 percent iron, and is most 
notable for its resistance to high temperature corrosion. It has a 
melting point of 1390 degrees Celsius and displays a creep rupture 
limit of 4 kilograms per square millimeter at 1000 degrees Celsius. 
This steel is most commonly used in the production of heating ribbons 
for circuit breakers and industrial furnaces, and in rheostats for 
railway locomotives. The product is currently available under 
proprietary trade names such as ``Gilphy 36.''\2\
---------------------------------------------------------------------------

    \2\ ``Gilphy 36'' is a trademark of Imphy, S.A.
---------------------------------------------------------------------------

    Certain martensitic precipitation-hardenable stainless steel is 
also excluded from the scope of this order. This high-strength, ductile 
stainless steel product is designated under the Unified Numbering 
System (``UNS'') as S45500-grade steel, and contains, by weight, 11 to 
13 percent chromium and 7 to 10 percent nickel. Carbon, manganese, 
silicon and molybdenum each comprise, by weight, 0.05 percent or less, 
with phosphorus and sulfur each comprising, by weight, 0.03 percent or 
less. This steel has copper, niobium, and titanium added to achieve 
aging, and will exhibit yield strengths as high as 1700 Mpa and 
ultimate tensile strengths as high as 1750 Mpa after aging, with 
elongation percentages of 3 percent or less in 50 mm. It is generally 
provided in thicknesses between 0.635 and 0.787 mm, and in widths of 
25.4 mm. This product is most commonly used in the manufacture of 
television tubes and is currently available under

[[Page 122]]

proprietary trade names such as ``Durphynox 17.''\3\
---------------------------------------------------------------------------

    \3\ ``Durphynox 17'' is a trademark of Imphy, S.A.
---------------------------------------------------------------------------

    Finally, three specialty stainless steels typically used in certain 
industrial blades and surgical and medical instruments are also 
excluded from the scope of this order. These include stainless steel 
strip in coils used in the production of textile cutting tools (e.g., 
carpet knives).\4\ This steel is similar to ASTM grade 440F, but 
containing, by weight, 0.5 to 0.7 percent of molybdenum. The steel also 
contains, by weight, carbon of between 1.0 and 1.1 percent, sulfur of 
0.020 percent or less and includes between 0.20 and 0.30 percent copper 
and between 0.20 and 0.50 percent cobalt. This steel is sold under 
proprietary names such as ``GIN4 HI-C.'' The second excluded stainless 
steel strip in coils is similar to AISI 420-J2 and contains, by weight, 
carbon of between 0.62 and 0.70 percent, silicon of between 0.20 and 
0.50 percent, manganese of between 0.45 and 0.80 percent, phosphorus of 
no more than 0.025 percent and sulfur of no more than 0.020 percent. 
This steel has a carbide density on average of 100 carbide particles 
per square micron. An example of this product is ``GIN5'' steel. The 
third specialty steel has a chemical composition similar to AISI 420 F, 
with carbon of between 0.37 and 0.43 percent, molybdenum of between 
1.15 and 1.35 percent, but lower manganese of between 0.20 and 0.80 
percent, phosphorus of no mor than 0.025 percent, silicon of between 
0.20 and 0.50 percent, and sulfur of no more than 0.020 percent. This 
product is supplied with a hardness of more than Hv 500 guaranteed 
after customer processing, and is supplied as, for example, ``GIN6.''
---------------------------------------------------------------------------

    \4\ This list of uses is illustrative and provided for 
descriptive purposes only.
---------------------------------------------------------------------------

Final Results of Review

    As noted above, the Department received no comments concerning the 
Preliminary Results. Therefore, consistent with the Preliminary 
Results, we continue to find the net subsidy for DMC to be 0.02 percent 
ad valorem, which is de minimis. See 19 CFR 351.106(c)(1). As there 
have been no changes to or comments on the Preliminary Results, we are 
not attaching a decision memorandum to this Federal Register notice. 
For further details of the programs included in this proceeding, see 
the Preliminary Results.

Assessment Rates/Cash Deposits

    The Department intends to issue assessment instructions to U.S. 
Customs and Border Protection (``CBP'') 15 days after the date of 
publication of these final results of this review, to liquidate 
shipments of subject merchandise by DMC entered, or withdrawn from 
warehouse, for consumption on or after January 1, 2004, through 
December 31, 2004, without regard to countervailing duties. We will 
also instruct CBP not to collect cash deposits of estimated 
countervailing duties on shipments of the subject merchandise by DMC 
entered, or withdrawn from warehouse, for consumption on or after the 
date of publication of the final results of this review.
    For all non-reviewed companies, we will instruct CBP to continue to 
collect cash deposits at the most recent company-specific or country-
wide rate applicable to the company. Accordingly, the cash deposit 
rates that will be applied to non-reviewed companies covered by this 
order are those established in the most recently completed 
administrative proceeding. See Final Results of Countervailing Duty 
Administrative Review: Stainless Steel Sheet and Strip in Coils from 
the Republic of Korea, 69 FR 2113 (January 14, 2004). These rates shall 
apply to all non-reviewed companies until a review of a company 
assigned these rates is completed.

Return of Destruction of Proprietary Information

    This notice also serves as a reminder to parties subject to 
administrative protective order (``APO'') of their responsibility 
concerning the disposition of proprietary information disclosed under 
APO in accordance with 19 CFR 351.305(a)(3). Timely written 
notification of the return/destruction of APO materials or conversion 
to judicial protective order is hereby requested. Failure to comply 
with the regulations and the terms of an APO is a sanctionable 
violation.
    We are issuing and publishing these results in accordance with 
sections 751(a)(1) and 777(i)(1) of the Act.

    Dated: December 22, 2006.
David M. Spooner,
Assistant Secretary for Import Administration.
[FR Doc. E6-22494 Filed 12-29-06; 8:45 am]
BILLING CODE 3510-DS-S