[Federal Register Volume 71, Number 156 (Monday, August 14, 2006)]
[Notices]
[Pages 46475-46481]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E6-13285]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
EPA-HQ-OPPT-2006-0683; FRL-8068-8
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture (defined by statute to include
import) a new chemical (i.e., a chemical not on the TSCA Inventory) to
notify EPA and comply with the statutory provisions pertaining to the
manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of
TSCA, EPA is required to publish a notice of receipt of a
premanufacture notice (PMN) or an application for a test marketing
exemption (TME), and to publish periodic status reports on the
chemicals under review and the receipt of notices of commencement to
manufacture those chemicals. This status report, which covers the
period from June 16, 2006 to July 28, 2006, consists of the PMNs and
TMEs, both pending or expired, and the notices of commencement to
manufacture a new chemical that the Agency has received under TSCA
section 5 during this time period.
DATES: Comments identified by the specific PMN number or TME number,
must be received on or before September 13, 2006.
ADDRESSES: Submit your comments, identified by docket identification
(ID) no. EPA-HQ-OPPT-2006-0683, by one of the following methods.
http://www.regulations.gov. Follow the on-line
instructions for submitting comments.
Mail: Document Control Office (7407M), Office of Pollution
Prevention and Toxics (OPPT), Environmental Protection Agency, 1200
Pennsylvania Ave., NW., Washington, DC 20460-0001.
Hand Delivery: OPPT Document Control Office (DCO, EPA East
Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.
Attention: Docket ID number EPA-HQ-OPPT-2006-0683. The DCO is open from
8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The
telephone number for the DCO is (202) 564-8930. Such deliveries are
only accepted during the Docket's normal hours of operation, and
special arrangements should be made for deliveries of boxed
information.
Instructions: Direct your comments to docket ID number
EPA-HQ-OPPT-2006-0683. EPA's policy is that all comments received will
be included in the public docket without change and may be made
available online at http://www.regulations.gov, including any personal
information provided, unless the comment includes information claimed
to be Confidential Business Information (CBI) or other information
whose disclosure is restricted by statute. Do not submit information
that you consider to be CBI or otherwise protected through
regulations.gov or e-mail. The regulations.gov website is an
``anonymous access'' systems, which means EPA will not know your
identity or contact information unless you provide it in the body of
your comment. If you send an e-mail comment directly to EPA without
going through regulations.gov your e-mail address will be automatically
captured and included as part of the comment that is placed in the
public docket and made available on the Internet. If you submit an
electronic comment, EPA recommends that you include your name and other
contact information in the body of your comment and with any disk or CD
ROM you submit. If EPA cannot read your comment due to technical
difficulties and cannot contact you for clarification, EPA may not be
able to consider your comment. Electronic files should avoid the use of
special characters, any form of encryption, and be free of any defects
or viruses.
Docket: All documents in the docket are listed in the
regulations.gov index. Although listed in the index, some information
is not publicly available, i.e., CBI or other information whose
disclosure is restricted by statute. Certain other material, such as
copyrighted material, is not placed on the Internet and will be
publicly available only in hard copy form. Publicly available docket
materials are available electronically through regulations.gov or in
hard copy at the OPPT Docket, EPA Docket Center (EPA/DC), EPA West,
Room B102, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket
Center Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday
through Friday, excluding legal holidays. The telephone number for the
Public Reading Room is (202) 566-1744, and the telephone number for the
OPPT Docket is (202) 566-0280.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator,
Environmental Assistance Division, Office of Pollution Prevention and
Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania
Ave., NW., Washington, DC 20460-
[[Page 46476]]
0001; telephone number: (202) 554-1404; e-mail address: [email protected].
SUPPLEMENTARY INFORMATION:
I. General Information
A. Does this Action Apply to Me?
This action is directed to the public in general. As such, the
Agency has not attempted to describe the specific entities that this
action may apply to. Although others may be affected, this action
applies directly to the submitter of the premanufacture notices
addressed in the action. If you have any questions regarding the
applicability of this action to a particular entity, consult the person
listed under FOR FURTHER INFORMATION CONTACT.
B. What Should I Consider as I Prepare My Comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through
regulations.gov or e-mail. Clearly mark the part or all of the
information that you claim to be CBI. For CBI information in a disk or
CD ROM that you mail to EPA, mark the outside of the disk or CD ROM as
CBI and then identify electronically within the disk or CD ROM the
specific information that is claimed CBI). In addition to one complete
version of the comment that includes information claimed as CBI, a copy
of the comment that does not contain the information claimed as CBI
must be submitted for inclusion in the public docket. Information so
marked will not be disclosed except in accordance with procedures set
forth in 40 CFR part 2.
2. Tips for preparing your comments. When submitting comments,
remember to:
i. Identify the document by docket number and other identifying
information (subject heading, Federal Register date and page number).
ii. Follow directions - The agency may ask you to respond to
specific questions or organize comments by referencing a Code of
Federal Regulations (CFR) part or section number.
iii. Explain why you agree or disagree; suggest alternatives and
substitute language for your requested changes.
iv. Describe any assumptions and provide any technical information
and/or data that you used.
v. If you estimate potential costs or burdens, explain how you
arrived at the estimate.
vi. Provide specific examples to illustrate your concerns, and
suggested alternatives.
vii. Explain your views as clearly as possible, avoiding the use of
profanity or personal threats.
viii. Make sure to submit your comments by the comment period
deadline identified.
II. Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture
(defined by statute to include import) a new chemical (i.e., a chemical
not on the TSCA Inventory to notify EPA and comply with the statutory
provisions pertaining to the manufacture of new chemicals. Under
sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a
notice of receipt of a PMN or an application for a TME and to publish
periodic status reports on the chemicals under review and the receipt
of notices of commencement to manufacture those chemicals. This status
report, which covers the period from June 16, 2006 to July 28, 2006,
consists of the PMNs and TMEs, both pending or expired, and the notices
of commencement to manufacture a new chemical that the Agency has
received under TSCA section 5 during this time period.
III. Receipt and Status Report for PMNs
This status report identifies the PMNs and TMEs, both pending or
expired, and the notices of commencement to manufacture a new chemical
that the Agency has received under TSCA section 5 during this time
period. If you are interested in information that is not included in
the following tables, you may contact EPA as described in Unit II. to
access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to
the extent that such information is not claimed as CBI) on the PMNs
received by EPA during this period: the EPA case number assigned to the
PMN; the date the PMN was received by EPA; the projected end date for
EPA's review of the PMN; the submitting manufacturer; the potential
uses identified by the manufacturer in the PMN; and the chemical
identity.
I. 78 Premanufacture Notices Received From: 06/16/06 to 07/28/06
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-06-0616 06/15/06 09/12/06 PPG Aerospace PRC- (S) Reactive diluent/ (G) Modified
desoto binder in aerospace triethylene glycol
sealants dithiol
P-06-0617 06/19/06 09/16/06 CBI (G) Destructive use (G) Brominated
polyaromatic
compound
P-06-0618 06/20/06 09/17/06 CBI (G) Highly dispersive (G) Salts of modified
powdered emulsifier tall-oil fatty acid
component amidoamines
P-06-0619 06/20/06 09/17/06 CBI (G) Highly dispersive (G) Salts of modified
powdered emulsifier tall-oil fatty acids
component
P-06-0620 06/26/06 09/23/06 Oleon Americas, Inc. (G) Industrial (S) Fatty acids,
hydraulic fluid C8 10, tetraesters
with bis[2,2-
bis(hydroxymethyl)bu
tyl] adipate
P-06-0621 06/27/06 09/24/06 CBI (S) Base resin for (G) Organic acid,
ultra violet light polymer with 1,6-
and electron beam hexanediol and 5-
curable formulations isocyanato-1-
(isocyanatomethyl)-
1,3,3-
trimethylcyclohexane
, 2-hydroxyethyl
acrylate-blocked
P-06-0622 06/27/06 09/24/06 Huntsman Corporation (S) Intermediate (S) 1,2-ethanediol,
monomer for polymer monocarbamate
synthesis
P-06-0623 06/28/06 09/25/06 PPG Industries, Inc. (G) Component of an (G) Aspartic acid,
industrial coating N,N'-(iminodi-
alkanediyl)bis,
tetraalkane ester
P-06-0624 06/28/06 09/25/06 PPG Industries, Inc. (G) Component of an (G) Aspartic acid,
industrial coating N,N,'-(iminodi-
alkanediyl)bis,
tetraalkane ester
P-06-0625 06/23/06 09/20/06 CBI (S) Adhesion promotor (G) Isocyanate-
for polyurethane terminated alkyl
alkoxy silane
[[Page 46477]]
P-06-0626 06/28/06 09/25/06 Forbo adhesives, LLC (G) Hot melt adhesive (G) Isocyanate
functional polyester
urethane polymer
P-06-0627 06/28/06 09/25/06 Hi-tech Color, Inc. (G) Additive in (G) Styrene acryl
waterbase inks polymer
P-06-0628 06/28/06 09/25/06 Cytec Surface (S) Ultra violet/ (G) Alkyl
Specialties Inc. electron beam binder diisocyanate,
resin for coatings homopolymer,
substituted alkenoic
acid and
heteromonocyclic
homopolymer and
substituted
polyethylene glycol
P-06-0629 06/29/06 09/26/06 CBI (G) Coating component (G) Polymer of
styrene, alkyl
methacrylates, and
substituted
methacrylates
P-06-0630 06/29/06 09/26/06 CBI (G) Coating component (G) Mixed metal oxide
complex
P-06-0631 06/28/06 09/25/06 CBI (G) Open non- (G) Aromatic
dispersive (resin) thermoplastic
polyurethane
P-06-0632 06/30/06 09/27/06 CBI (G) Processing aid (S) Phospholipase c
for vegetable oil
refining
P-06-0633 06/30/06 09/27/06 CBI (G) Antioxidant (G) Ncs 1:
Substituted phenol
P-06-0634 06/30/06 09/27/06 CBI (G) Antioxidant (G) Ncs 2:
Substituted phenol
P-06-0635 07/03/06 09/30/06 CBI (S) Ingredient in (S) 6,10-dodecadien-1-
fragrance compound ol, 3,7,11-trimethyl-
P-06-0636 07/03/06 09/30/06 CBI (S) Curing agent for (G) Polymer of
epoxy coating unsaturated fatty
systems acids with
phenylalkylene
polyamine, epoxy
resin and polyether
polyamine
P-06-0637 07/03/06 09/30/06 CBI (S) Aromatic (G) Aromatic
polyester used as a polyester
component in
photoresist
manufacture
P-06-0638 07/05/06 10/02/06 CBI (S) Crosslinked (G) Crosslinked
polyester used as a cyclic polyester
component in
photoresist
manufacture.
P-06-0639 07/05/06 10/02/06 Alberdingk Boley Inc. (G) Industrial (G) Castor oil,
coatings dehydrated polymer
with adipic acid,
ethylenediamine, 1,6-
hexanediol, 3-
hydroxy-2-
(hydroxymethyl)-2-
methylpropanoic
acid, 1,1'-
methylenebis[4-
isocyanatocyclohexan
e], neopentyl glycol
and polyethylene
glycol mono[2,2-
bis(hydroxyalkyl)alk
yl] ether, compound
with triethylamine
P-06-0640 07/05/06 10/02/06 CBI (G) Masking aid (G) Isocyanate
terminated adduct of
polymeric isocyanate
with an amine silane
P-06-0641 07/06/06 10/03/06 Para-chem, Inc./ (G) Binder (G) Acrylate,
Standard Division polymers with
poly(vinyl alcohol)
P-06-0642 07/06/06 10/03/06 Para-Chem, Inc./ (G) Binder (G) Acrylate,
Standard Division polymers with
poly(vinyl alcohol)
P-06-0643 07/06/06 10/03/06 Para-Chem, Inc./ (G) Binder (G) Acrylate,
Standard Division polymers with
poly(vinyl alcohol)
P-06-0644 07/07/06 10/04/06 Boulder Scientific (S) Chemical (S) Magnesium,
Company intermediate bromo(pentafluorophe
nyl)-
P-06-0645 07/07/06 10/04/06 International Flavors (S) Raw material for (S) 3-decen-5-one, 4-
and Fragrances, Inc. use in fragrances methyl-, (3e)-
for soaps,
detergents, cleaners
and other household
products
P-06-0646 07/07/06 10/04/06 CBI (G) Industrial (G) Fatty acids,
coatings binder alkyl- unsaturated,
dimers, reaction
products with
bisphenol a-
bisphenol a
diglycidyl ether
polymer and
polyethylenepolyamin
es
P-06-0647 07/07/06 10/04/06 CBI (G) Colorant (G) Sulfonated azo-
naphthalene
derivative, salt
P-06-0648 07/07/06 10/04/06 CBI (G) Colorant (G) Sulfonated azo-
naphthalene
derivative, salt
P-06-0649 07/07/06 10/04/06 CBI (G) Colorant (G) Sulfonated azo-
naphthalene
derivative, salt
P-06-0650 07/07/06 10/04/06 CBI (G) Colorant (G) Sulfonated azo-
naphthalene
derivative, salt
P-06-0651 07/10/06 10/07/06 CBI (G) Paint additive (G) Acrylic polymer
P-06-0652 07/10/06 10/07/06 CBI (G) Paint additive (G) Acrylic polymer
P-06-0653 07/10/06 10/07/06 CBI (G) Paint additive (G) Acrylic polymer
[[Page 46478]]
P-06-0654 07/10/06 10/07/06 CBI (G) Paint additive (G) Acrylic polymer
P-06-0655 07/11/06 10/08/06 CBI (G) Synthetic (G) Polyol esters
lubricant base stock
P-06-0656 07/11/06 10/08/06 CBI (G) Synthetic (G) Polyol esters
lubricant base stock
P-06-0657 07/11/06 10/08/06 CBI (S) Coatings (G) Alkyl
application acetoacetate resin
P-06-0658 07/12/06 10/09/06 Cytec Surface (S) Flame retardant (G) Phosphine oxide
Specialties Inc. additive for surface ester
coatings
P-06-0659 07/13/06 10/10/06 Dow Agrosciences (S) Intermediate (G) Macrocyclic
lactone derivative
salt
P-06-0660 07/13/06 10/10/06 Dow Agrosciences (S) Intermediate (G) Macrocyclic
lactone derivative
P-06-0661 07/13/06 10/10/06 CBI (G) Industrial (G)
adhesive primer Naphthalenesulfonic
component for open, acid salt, polymer
non-dispersive use with resorcinol,
formaldehyde and
phenol
P-06-0662 07/14/06 10/11/06 CBI (G) Open non- (G) Polyester
dispersive polyurethane
(polyurethane
lacquer)
P-06-0663 07/14/06 10/11/06 CBI (G) Open non- (G) Aliphatic
dispersive (coating) polyester -
polyurethane
P-06-0664 07/14/06 10/11/06 CBI (G) Open air non- (G) Polyester/
dispersive use urethane acrylate
oligomer
P-06-0665 07/14/06 10/11/06 PPG Industries, Inc. (G) Component of an (G) Alkenedioic acid,
industrial coating dialkyl ester,
reaction products
with
polyaminocarbomonocy
cle and alkenoic
acid alkyl ester
P-06-0666 07/14/06 10/11/06 PPG Industries, Inc. (G) Component of an (G) Alkenedioic acid,
industrial coating dialkyl ester,
reaction products
with
polyaminocarbomonocy
cle and alkenoic
acid alkyl ester
P-06-0667 07/14/06 10/11/06 PPG Industries, Inc. (G) Component of an (G) Alkenedioic acid,
industrial coating dialkyl ester,
reaction products
with
polyaminocarbomonocy
cle and alkenoic
acid alkyl ester
P-06-0668 07/14/06 10/11/06 PG Industries, Inc. (G) Component of an (G) Alkenedioic acid,
industrial coating dialkyl ester,
reaction products
with
polyaminocarbomonocy
cle and alkenoic
acid alkyl ester
P-06-0669 07/14/06 10/11/06 PPG Industries, Inc. (G) Component of an (G) Alkenedioic acid,
industrial coating dialkyl ester,
reaction products
with
polyaminocarbomonocy
cle and alkenoic
acid alkyl ester
P-06-0670 07/14/06 10/11/06 PPG Industries, Inc. (G) Component of an (G) Alkenedioic acid,
industrial coating dialkyl ester,
reaction products
with
polyaminocarbomonocy
cle and alkenoic
acid alkyl ester
P-06-0671 07/14/06 10/11/06 CBI (G) Spacer in (S) 2-propenoic acid,
electronic parts 1,6-hexanediyl
ester, polymers with
2-hydroxyethyl
acrylate-blocked
hydroxy-terminated
polybutadiene-2,4-
tdi polymer
P-06-0672 07/14/06 10/11/06 CBI (G) Spacer in (S) Poly(oxy-1,4-
electronic parts butanediyl), .alpha.-
(1-oxo-2-propenyl)-
.omega.-[(1-oxo-2-
propenyl)oxy]-,
polymer with
diethenylbenzene and
ethenylethylbenzene
P-06-0673 07/17/06 10/14/06 CBI (G) Open non- (G) Silylated polymer
dispersive uses
P-06-0674 07/19/06 10/16/06 CBI (G) Polymer used to (G) Alkene acrylate
improve scratch copolymer
resistance of
thermoplastics open/
non-dispersive use
P-06-0675 07/20/06 10/17/06 CBI (S) Hotmelt adhesive (G) Aliphatic
for textile/clothes dicarboxylic acid
applications polymer with
alkanediamine and
lactam
P-06-0676 07/20/06 10/17/06 Sasol North America (S) Mineral (S) Alcohols, C2 33,
Inc. processing manufacture. of, by
(flotation aid) - products from,
substitute for overheads
diesel; oil recovery
(drilling and field
fluids) - substitute
for diesel
P-06-0677 07/21/06 10/18/06 Dupont Company (G) Film resin (G) Ethylene
interpolymer
P-06-0678 07/21/06 10/18/06 Zeon Chemicals L.P. (S) Automotive seals (G) Acrylate
and gaskets copolymer
P-06-0679 07/21/06 10/18/06 CBI (G) Ink additive (G) 1,3-
benzenedisulfonic
acid, 4-[[3-methyl-1-
(3-
sulfobenzoyl)heterop
olycyclel]amino]-,
triammonium salt
P-06-0680 07/21/06 10/18/06 CBI (G) Printing ink (G) Polyurethane
additive polymer
P-06-0681 07/24/06 10/21/06 CBI (G) An open non- (G) Bisphenol a type
dispersive use epoxy resin
[[Page 46479]]
P-06-0682 07/18/06 10/15/06 CBI (G) Destructive use (G) Surface modified
magnesium hydroxide
P-06-0683 07/25/06 10/22/06 Henkel (S) Hot melt and (S) Dodecanedioic
molding adhesives acid, polymer with
1,6-hexanediamine
and piperazine
P-06-0684 07/25/06 10/22/06 Henkel (S) Hot melt and (S) Decanedioic acid,
molding adhesives polymer with 1,6-
hexanediamine and
piperazine
P-06-0685 07/25/06 10/22/06 Henkel (S) Hot melt and (S) Fatty acids, C18-
molding adhesives unsaturated, dimers,
hydrogenated,
polymers with
ethylenediamine,
hexamethylenediamine
and tetradecanedioic
acid
P-06-0686 07/25/06 10/22/06 Henkel (S) Hot melt and (S) Fatty acids, C18-
molding adhesives unsaturated, dimers,
hydrogenated,
polymers with
ethylenediamine,
piperazine,
polypropylene glycol
diamine and sebacic
acid
P-06-0687 07/25/06 10/22/06 Henkel (S) Hot melt and (S) Fatty acids, C18-
molding adhesives unsaturated, dimers,
polymers with adipic
acid,
hexamethylenediamine
, polypropylene
glycol diamine and
tall-oil fatty acids
P-06-0688 07/25/06 10/22/06 J.H.Calo Company (S) Polyester resin (S) Hexanedioic acid,
for 2 component polymer with 2,2-
polyurethane systems dimethyl-1,3-
propanediol, 1,4-
cyclohexanedimethano
l, hexahydro-1,3-
isobenzofurandione
and 1,2-propanediol
P-06-0689 07/25/06 10/22/06 Huntsman (S) Exhaust dyeing of (G) Alkyl amino
International, LLC cellulosic fabric substituted triazine
amino substituted
benzenesulfonic acid
reaction product
with
naphthalenesulfonato
azo substituted
phenyl azo
substituted
benzenedisulfonic
acid cooper compound
P-06-0690 07/25/06 10/22/06 CBI (G) Open non- (G) Diphenylmethane
dispersive isocyanate polyester
thermoplastic resin elastomer
P-06-0691 07/26/06 10/23/06 CBI (G) Chemical (G) Derivatized
intermediate triglycerides
P-06-0692 07/26/06 10/23/06 CBI (G) Chemical (G) Derivatized
intermediate hydroxylated
triglycerides
P-06-0693 07/26/06 10/23/06 CBI (G) Crude oil (G) Alkyl dimethyl
production chemical betaine
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table II of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the TME
received:
I. 1 Test Marketing Exemption Notice Received From: 06/16/06 to 07/28/06
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End
Case No. Received Date Date Manufacturer/Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-06-0008 07/12/06 08/25/06 Cytec Surface (S) Flame retardant (G) Phosphine oxide
Specialties Inc. additive for surface ester
coatings
--------------------------------------------------------------------------------------------------------------------------------------------------------
In Table III of this unit, EPA provides the following information
(to the extent that such information is not claimed as CBI) on the
Notices of Commencement to manufacture received:
III. 57 Notices of Commencement From: 06/16/06 to 07/28/06
----------------------------------------------------------------------------------------------------------------
Commencement Notice
Case No. Received Date End Date Chemical
----------------------------------------------------------------------------------------------------------------
P-01-0694 07/14/06 07/10/06 (G) Bis(substituted)-1,3-
benzenediamine
P-01-0855 07/18/06 07/05/06 (G) Substituted
vinylether, ethoxylated,
propoxylated
P-01-0866 06/28/06 06/14/06 (G) Ethylene amine
aromatic epoxide adduct
P-02-1049 07/10/06 06/21/06 (G) Saturated and
unsaturated fatty acids,
esters with a polyalcohol
[[Page 46480]]
P-03-0546 07/03/06 05/26/06 (G) Amine functional epoxy
curing agent
P-04-0540 07/25/06 07/17/06 (S) 2,4-nonanedione, 3-
methyl-
P-04-0541 07/25/06 07/20/06 (S) 3-hexene, 1,1',1''-
[ethylidynetris(oxy)]tris-
, (3z,3'z,3''z)-
P-04-0585 07/25/06 07/01/06 (G) Substituted butyl
ethyl magnesium
P-04-0640 04/26/06 04/08/06 (G) Multifunctional
polycarbodiimide
P-04-0830 07/11/06 06/21/06 (G) Alkoxysilane modified
silica
P-04-0834 06/22/06 05/24/06 (G) Hdi biuret,
hydroxyethyl methacrylate
prepolymer
P-04-0882 07/24/06 07/12/06 (G) Quaternary amino
modified silicone-
polyether copolymer
P-05-0116 07/10/06 07/05/06 (G) Reaction product of
alkylcarboxylic acid,
substituted alkenyl amine
with aromatic anhydride
acetate salts
P-05-0358 07/21/06 07/14/06 (G) Polycarbodiimide
P-05-0416 06/23/06 06/07/06 (G) Acrylic polymer
P-05-0483 07/03/06 06/23/06 (G) Reaction products with
polyoxypropylenediamine
and alkyl ketone
P-05-0496 07/05/06 06/07/06 (G) Cyclohexane, 5-
isocyanato-1-
(isocyanatomethyl)-1,3,3-
trimethyl-, polymers with
hydroxy-terminated
saturated hydrocarbon
chain, 2-hydroxyethyl
acrylate-blocked
P-05-0500 07/05/06 06/21/06 (G) Thermochemical
mechanical processed
maize germ
P-05-0687 06/21/06 06/15/06 (G) Siloxane coated
alumina nanoparticles
P-05-0706 07/07/06 06/15/06 (G) Isocyanate prepolymer
P-05-0707 07/24/06 06/19/06 (G) Halogenated N,N,N-
trialkyl-alkylamminium, N-
aminocarbonylalkenyl
P-05-0724 07/11/06 06/16/06 (G) Quino[2,3-b]acridine-
7,14-dione, 5,12-dihydro-
2,9-dimethyl-, 4-[[2-
(sulfooxy)ethyl]substitut
ed]phenyl derivates,
sodium salts
P-05-0725 07/18/06 07/08/06 (G) Butanamide, 2-[(2-
methoxy-4-
nitrophenyl)azo]-n-(2-
methoxyphenyl)-3-oxo-,4-
[[2-
(sulfooxy)ethyl]substitut
ed]phenyl derivates,
sodium salts.
P-05-0792 07/26/06 07/12/06 (G) Substituted
benzenediamine
P-05-0814 07/10/06 06/14/06 (S) Tall-oil pitch,
sapond., neutralized,
sterol-low, ammonium
salts
P-05-0816 07/10/06 06/15/06 (S) Tall-oil pitch,
sapond., neutralized,
sterol-low, sodium salts
P-06-0004 07/18/06 07/12/06 (G) Butanamide, 2-[(2-
methoxy-4-
nitrophenyl)azo]-n-(2-
methoxyphenyl)-3-oxo-, 4-
[(17-substituted-
3,6,9,12,15-
pentaazaheptadec-1-
yl)substituted]phenyl
derivates
P-06-0007 07/11/06 06/23/06 (G) Quino[2,3-b]acridine-
7,14-dione, 5,12-dihydro-
2,9-dimethyl-, 4-[(17-
substituted-3,6,9,12,15-
pentaazaheptadec-1-
yl)substituted]phenyl
derivates
P-06-0012 07/19/06 06/20/06 (G) Polyurethane
derivative
P-06-0077 06/20/06 06/04/06 (G) Salt of amine with
aromatic acid
P-06-0078 07/20/06 06/26/06 (G) Dimethylterephthalate,
polymer with mixed
glycols, ester with a
polyethylene glycol ether
P-06-0101 07/05/06 05/22/06 (G) Acrylic solution
polymer
P-06-0165 07/14/06 06/30/06 (G) Halogenated aromatic
anhydride copolymer
P-06-0177 07/13/06 07/06/06 (G) Isocyanate functional
polyester polyether
urethane polymer
P-06-0185 06/22/06 05/16/06 (G) Substituted polycyclic-
acid, ((((halo-
((substituted)phenyl)amin
o) -heterocycle)amino-
sulfophenyl)azo)-hydroxy-
alkyl-substituted-,
sodium salt
P-06-0230 06/21/06 06/06/06 (G) Substituted aniline
P-06-0246 07/05/06 06/14/06 (G) Modified ketone resin,
sodium salt
P-06-0260 06/28/06 06/09/06 (G) Naphthalenesulfonic
acid azo substituted
naphthyl amino
substituted triazine
amino phenyl sulfonyl
alkyl salt compound
P-06-0273 07/10/06 06/28/06 (S) Fatty acids, soya,
esters with polyethylene
glycol mono-me ether
P-06-0306 07/05/06 06/15/06 (G) Aqueous polyurethane
dispersion
P-06-0307 07/18/06 07/11/06 (G) Polyester urethane
P-06-0308 07/07/06 06/20/06 (G) Polyester urethane
P-06-0309 07/19/06 06/30/06 (S) 1,3-
benzenedicarboxylic acid,
polymer with 2,2-dimethyl-
1,3-propanediol, 1,2-
ethanediol, 2,5-
furandione and 1,2-
propanediol, phenylmethyl
ester
P-06-0314 07/25/06 07/14/06 (G) Polyoxyalkylene
siloxane
P-06-0316 07/10/06 06/27/06 (G) Aluminum trihydrate
surface treated
P-06-0329 07/05/06 06/24/06 (G) Fatty acid glycol
ester
P-06-0331 07/07/06 05/31/06 (G) Silicone polyether
modified polyester
polyurethane.
P-06-0335 06/28/06 06/23/06 (G) Naphthalenesulfonic
acid azo substituted
naphthalenesulfonic acid
amino substituted
triazine amino phenyl
sulfonyl compound
P-06-0338 07/13/06 06/26/06 (G) Condensation
polymerized silane
functionalized aliphatic
amine
P-06-0350 07/25/06 06/26/06 (G) Polyoxyalkylene ether
P-06-0377 07/18/06 06/29/06 (S) Phosphonic acid, octyl-
, monosodium salt
P-06-0378 07/18/06 06/29/06 (S) Phosphonic acid, octyl-
, disodium salt
P-06-0381 06/29/06 06/25/06 (G) Sulfonyl phenyl amino
substituted triazine
naphthalenesulfonic acid
azo phenyl hydroxyl
naphthalene hydroxyl azo
naphthalenesulfonic acid
chromium compound
P-06-0387 07/24/06 07/06/06 (G) 1,1-diacidsubstituted
2 -(4-aminophenyl)
ethanol, monosodium salt
P-06-0441 07/24/06 07/17/06 (G) Maleimide alkyl
carboxylic acid
P-94-2125 07/10/06 07/05/95 (G) Polyesteramide resin
P-99-1253 07/05/06 06/29/06 (G) Polyamine adducts
----------------------------------------------------------------------------------------------------------------
[[Page 46481]]
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: August 7, 2006.
Darryl S. Ballard,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. E6-13285 Filed 8-11-06; 8:45 am]
BILLING CODE 6560-50-S