[Federal Register Volume 71, Number 143 (Wednesday, July 26, 2006)]
[Rules and Regulations]
[Pages 42274-42278]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: E6-11720]


=======================================================================
-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

40 CFR Part 180

[EPA-HQ-OPP-2006-0552; FRL-8075-8]


Butene, Homopolymer; Tolerance Exemption

AGENCY: Environmental Protection Agency (EPA).

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: This regulation revises the exemption from the requirement of 
a tolerance for residues of butene, homopolymer when used as an inert 
ingredient in a pesticide chemical formulation. Miller Chemical and 
Fertilizer Corporatation submitted a petition to EPA under the Federal 
Food,

[[Page 42275]]

Drug, and Cosmetic Act (FFDCA), as amended by the Food Quality 
Protection Act of 1996 (FQPA) requesting a revision of an exemption 
(which has already been established) from the requirement of a 
tolerance. This regulation eliminates the need to establish a maximum 
permissible level for residues of butene, homopolymer.

DATES: This regulation is effective July 26, 2006. Objections and 
requests for hearings must be received on or before September 25, 2006, 
and must be filed in accordance with the instructions provided in 40 
CFR part 178 (see also Unit I.C. of the SUPPLEMENTARY INFORMATION.

ADDRESSES: EPA has established a docket for this action under docket 
identification (ID) number EPA-HQ-OPP-2006-0552. All documents in the 
docket are listed in the index for the docket. Although listed in the 
index, some information is not publicly available, e.g., Confidential 
Business Information (CBI) or other information whose disclosure is 
restricted by statute. Certain other material, such as copyrighted 
material, is not placed on the Internet and will be publicly available 
only in hard copy form. Publicly available docket materials are 
available in the electronic docket at http://www.regulations.gov, or, 
if only available in hard copy, at the OPP Regulatory Public Docket in 
Rm. S-4400, One Potomac Yard (SouthBuilding), 2777 S. Crystal Drive, 
Arlington, VA. The Docket Facility is open from 8:30 a.m. to 4 p.m., 
Monday through Friday, excluding legal holidays. The Docket telephone 
number is (703) 305-5805.

FOR FURTHER INFORMATION CONTACT: Bipin Gandhi, Registration Division 
(7505P), Office of Pesticide Programs, Environmental Protection Agency, 
1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone 
number: (703) 308-8380; e-mail address:[email protected].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

    You may be potentially affected by this action if you are an 
agricultural producer, food manufacturer, or pesticide manufacturer. 
Potentially affected entities may include, but are not limited to:
     Crop production (NAICS code 111)
     Animal production (NAICS code 112)
     Food manufacturing (NAICS code 311)
     Pesticide manufacturing (NAICS code 32532)
    This listing is not intended to be exhaustive, but rather provides 
a guide for readers regarding entities likely to be affected by this 
action. Other types of entities not listed in this unit could also be 
affected. The North American Industrial Classification System (NAICS) 
codes have been provided to assist you and others in determining 
whether this action might apply to certain entities. If you have any 
questions regarding the applicability of this action to a particular 
entity, consult the person listed under FOR FURTHER INFORMATION 
CONTACT.

B. How Can I Access Electronic Copies of this Document?

    In addition to accessing an electronic copy of this Federal 
Register document through the electronic docket at http://www.regulations.gov, you may access this ``Federal Register'' document 
electronically through the EPA Internet under the ``Federal Register'' 
listings at http://www.epa.gov/fedrgstr. You may also access a 
frequently updated electronic version of 40 CFR part 180 through the 
Government Printing Office's pilot e-CFR site at http://www.gpoaccess.gov/ecfr.

C. Can I File an Objection or Hearing Request?

    Under section 408(g) of the FFDCA, as amended by the FQPA, any 
person may file an objection to any aspect of this regulation and may 
also request a hearing on those objections. The EPA procedural 
regulations which govern the submission of objections and requests for 
hearings appear in 40 CFR part 178. You must file your objection or 
request a hearing on this regulation in accordance with the 
instructions provided in 40 CFR part 178. To ensure proper receipt by 
EPA, you must identify docket ID number EPA-HQ-OPP-2006-0552 in the 
subject line on the first page of your submission. All requests must be 
in writing, and must be mailed or delivered to the Hearing Clerk on or 
before September 25, 2006.
    In addition to filing an objection or hearing request with the 
Hearing Clerk as described in 40 CFR part 178, please submit a copy of 
the filing that does not contain any CBI for inclusion in the public 
docket that is described in ADDRESSES. Information not marked 
confidential pursuant to 40 CFR part 2 may be disclosed publicly by EPA 
without prior notice. Submit your copies, identified by docket ID 
number EPA-HQ-OPP-2006-0552, by one of the following methods.
     Federal eRulemaking Portal: http://www.regulations.gov. 
Follow the on-line instructions for submitting comments.
     Mail: Office of Pesticide Programs (OPP) Regulatory Public 
Docket (7502P), Environmental Protection Agency, 1200 Pennsylvania 
Ave., NW., Washington, DC 20460-0001.
     Delivery: OPP Regulatory Public Docket (7502P), 
Environmental Protection Agency, Rm. S-4400, One Potomac Yard (South 
Building), 2777 S. Crystal Drive, Arlington, VA. Deliveries are only 
accepted during the Docket's normal hours of operation (8:30 a.m. to 4 
p.m., Monday through Friday, excluding legal holidays). Special 
arrangements should be made for deliveries of boxed information. The 
Docket telephone number is (703) 305-5805.

II. Background and Statutory Findings

    In the Federal Register of January 25, 2006 (71 FR 4138) (FRL-7744-
4), EPA issued a notice pursuant to section 408 of the FFDCA, 21 U.S.C. 
346a, as amended by the FQPA (Public Law 104-170), announcing the 
filing of a pesticide petition (PP 5E6958) by Miller Chemical and 
Fertilizer Corporation, P. O. Box 333, 120 Radio Road, Hanover, PA 
17331. The petition requested that 40 CFR 180.960 be amended by 
establishing an exemption from the requirement of a tolerance for 
residues of butene, homopolymer; CAS Reg.No. 9003-29-6. That notice 
included a summary of the petition prepared by the petitioner. There 
were no comments in response to the notice of filing.
    Section 408(c)(2)(A)(i) of the FFDCA allows EPA to establish an 
exemption from the requirement for a tolerance (the legal limit for a 
pesticide chemical residue in or on a food) only if EPA determines that 
the tolerance ``safe.'' Section 408(c)(2)(A)(ii) of the FFDCA defines 
``safe'' to mean that ``there is a reasonable certainty that no harm 
will result from aggregate exposure to the pesticide chemical residue, 
including all anticipated dietary exposures and all other exposures 
forwhich there is reliable information.'' This includes exposure 
through drinking water and in residential settings, but does not 
include occupational exposure. Section 408(b)(2)(C) of the FFDCA 
requires EPA to give special consideration to exposure of infants and 
children to the pesticide chemical residue in establishing an exemption 
from the requirement of a tolerance and to ``ensure that there is a 
reasonable certainty that no harm will result to infants and children 
from aggregate exposure to the pesticide chemical residue'' and 
specifies factors EPA is to consider in establishing an exemption.

[[Page 42276]]

III. Inert Ingredient Definition

    Inert ingredients are all ingredients that are not active 
ingredients as defined in 40 CFR 153.125 and include, but are not 
limited to, the following types of ingredients (except when they have a 
pesticidal efficacy of their own): Solvents such as alcohols and 
hydrocarbons; surfactants such as polyoxyethylene polymers and fatty 
acids; carriers such as clay and diatomaceous earth; thickeners such as 
carrageenan and modified cellulose; wetting, spreading, and dispersing 
agents; propellants in aerosol dispensers; microencapsulating agents; 
and emulsifiers. The term ``inert'' is not intended to imply 
nontoxicity; the ingredient may or may not be chemically active. 
Generally, EPA has exempted inert ingredients from the requirement of a 
tolerance based on the low toxicity of the individual inert 
ingredients.

IV. Risk Assessment and Statutory Findings

    EPA establishes exemptions from the requirement of a tolerance only 
in those cases where it can be shown that the risks from aggregate 
exposure to pesticide chemical residues under reasonably foreseeable 
circumstances will pose no appreciable risks to human health. In order 
todetermine the risks from aggregate exposure to pesticide inert 
ingredients, the Agency considers the toxicity of the inert in 
conjunction with possible exposure to residues of the inert ingredient 
through food, drinking water, and through other exposures that occur as 
a result of pesticide use in residential settings. If EPA is able to 
determine that a finite tolerance is not necessary to ensure that there 
is a reasonable certainty that no harm will result from aggregate 
exposure to the inert ingredient, an exemption from the requirement of 
a tolerance may be established.
    Consistent with section 408(b)(2)(D) of the FFDCA, EPA has reviewed 
the available scientific data and other relevant information in support 
of this action and considered its validity, completeness and 
reliability and the relationship of this information to human risk. EPA 
has also considered available information concerning the variability of 
the sensitivities of major identifiable subgroups of consumers, 
including infants and children. In the case of certain chemical 
substances that are defined as polymers, the Agency has established a 
set of criteria to identify categories of polymers that should present 
minimal or no risk. The definition of a polymer is given in 40 CFR 
723.250(b). The following exclusion criteria for identifying these low 
risk polymers are described in 40 CFR 723.250(d).
    1. The polymer, butene, homopolymer, is not a cationic polymer nor 
is it reasonably anticipated to become a cationic polymer in a natural 
aquatic environment.
    2. The polymer does contain as an integral part of its composition 
the atomic elements carbon, hydrogen, and oxygen.
    3. The polymer does not contain as an integral part of its 
composition, except as impurities, any element other than those listed 
in 40 CFR 723.250(d)(2)(ii).
    4. The polymer is neither designed nor can it be reasonably 
anticipated to substantially degrade, decompose, or depolymerize.
    5. The polymer is manufactured or imported from monomers and/or 
reactants that are already included on the TSCA Chemical Substance 
Inventory or manufactured under an applicable TSCA section 5 exemption.
    6. The polymer is not a water absorbing polymer with a number 
average molecular weight (MW) greater than or equal to 10,000 daltons.
    Additionally, the polymer, butene, homopolymer, also meets as 
required the following exemption criteria specified in 40 CFR 
723.250(e).
    7. The polymer's number average molecular weight (MW) of 1100 is 
greater than 1,000 and less than 10,000 daltons. The polymer contains 
less than 10% oligomeric material below MW 500 and less than 25% 
oligomeric material below MW 1,000, and the polymer does not contain 
any reactive functional groups.
    Thus, butene, homopolymer meet all the criteria for a polymer to be 
considered low risk under 40 CFR 723.250. Based on its conformance to 
the above criteria, no mammalian toxicity is anticipated from dietary, 
inhalation, or dermal exposure to butene, homopolymer.

V. Aggregate Exposures

    For the purposes of assessing potential exposure under this 
exemption, EPA considered that butene, homopolymer could be present in 
all raw and processed agricultural commodities and drinking water, and 
that non-occupational non-dietary exposure was possible. The number 
average MW of butene, homopolymer is 1100 daltons. Generally, a polymer 
of this size would be poorly absorbed through the intact 
gastrointestinal tract or through intact human skin. Since butene, 
homopolymer conform to the criteria that identify a low risk polymer, 
there are no concerns for risks associated with any potential exposure 
scenarios that are reasonably foreseeable. The Agency has determined 
that a tolerance is not necessary to protect the publichealth.

VI. Cumulative Effects

    Section 408 (b)(2)(D)(v) of FFDCA requires that, when considering 
whether to establish, modify, or revoke a tolerance or tolerance 
exemption, the Agency consider ``available information'' concerning the 
cumulative effects of a particular chemical's residues and ``other 
substances that have a common mechanism of toxicity.'' EPA does not 
have, at this time, available data to determine whether butene, 
homopolymer has a common mechanism of toxicity with other substances. 
Unlike other pesticides for which EPA has followed a cumulative risk 
approach based on a common mechanism of toxicity, EPA has not made a 
common mechanism of toxicity finding as to butene, homopolymer and any 
other substances and butene, homopolymer does not appear to produce a 
toxic metabolite produced by other substances. For the purposes of this 
tolerance action, therefore, EPA has not assumed that butene, 
homopolymer has a common mechanism of toxicity with other substances. 
For information regarding EPA's efforts to determine which chemicals 
have a common mechanism of toxicity and to evaluate the cumulative 
effects of such chemicals, see the policy statements released by EPA's 
Office of Pesticide Programs concerning common mechanism determinations 
and procedures for cumulating effects from substances found to have a 
common mechanism on EPA's Web site at http://www.epa.gov/pesticides/cumulative.

VII. Additional Safety Factor for the Protection of Infants and 
Children

    Section 408 of the FFDCA provides that EPA shall apply an 
additional tenfold margin of safety for infants and children in the 
case of threshold effects to account for prenatal and postnatal 
toxicity and the completeness of the data base unless EPA concludes 
that a different margin of safety will be safe for infants and 
children. Due to the expected low toxicity of butene, homopolymer, EPA 
has not used a safety factor analysis to assess the risk. For the same 
reasons the additional tenfold safety factor is unnecessary.

VIII. Determination of Safety

    Based on the conformance to the criteria used to identify a low 
risk polymer, EPA concludes that there is a

[[Page 42277]]

reasonable certainty of no harm to the U.S. population, including 
infants and children, from aggregate exposure to residues of butene, 
homopolymer.

IX. Other Considerations

A. Endocrine Disruptors

    There is no available evidence that butene, homopolymer is an 
endocrine disruptor.

B. Analytical Enforcement Methodology

    An analytical method is not required for enforcement purposes since 
the Agency is establishing an exemption from the requirement of a 
tolerance without any numerical limitation.

C. International Tolerances

    The Agency is not aware of any country requiring a tolerance for 
butene, homopolymer nor have any CODEX Maximum Residue Levels (MRLs) 
been established for any food crops at this time.

X. Conclusion

    Accordingly, EPA finds that exempting residues of butene, 
homopolymer from the requirement of a tolerance will be safe.

XI. Statutory and Executive Order Reviews

    This final rule establishes an exemption from the tolerance 
requirement under section 408(d) of the FFDCA in response to a petition 
submitted to the Agency. The Office of Management and Budget (OMB) has 
exempted these types of actions from review under Executive Order 
12866, entitled Regulatory Planning and Review (58 FR 51735, October 4, 
1993). Because this rule has been exempted from review under Executive 
Order 12866 due to its lack of significance, this rule is not subject 
to Executive Order 13211, Actions Concerning Regulations That 
Significantly Affect Energy Supply, Distribution, or Use (66 FR 28355, 
May 22, 2001). This final rule does not contain any information 
collections subject to OMB approval under the Paperwork Reduction Act 
(PRA), 44 U.S.C. 3501 et seq., or impose any enforceable duty or 
contain any unfunded mandate as described under Title II of the 
Unfunded Mandates Reform Act of 1995 (UMRA) (Public Law 104-4). Nor 
does it require any special considerations under Executive Order 12898, 
entitled Federal Actions to Address Environmental Justice in Minority 
Populations and Low-Income Populations (59 FR 7629, February 16, 1994); 
or OMB review or any Agency action under Executive Order 13045, 
entitled Protection of Children from Environmental Health Risks and 
Safety Risks (62 FR 19885, April 23, 1997). This action does not 
involve any technical standards that would require Agency consideration 
of voluntary consensus standards pursuant to section 12(d) of the 
National Technology Transfer and Advancement Act of 1995 (NTTAA), 
Public Law 104-113, section 12(d) (15 U.S.C. 272 note). Since 
tolerances and exemptions that are established on the basis of a 
petition under section 408(d) of the FFDCA, such as the exemption in 
this final rule, do not require the issuance of a proposed rule, the 
requirements of the Regulatory Flexibility Act (RFA) (5 U.S.C. 601et 
seq.) do not apply. In addition, the Agency has determined that this 
action will not have a substantial direct effect on States, on the 
relationship between the national government and the States, or on the 
distribution of power and responsibilities among the various levels of 
government, as specified in Executive Order 13132, entitled Federalism 
(64 FR 43255, August 10, 1999). Executive Order 13132 requires EPA to 
develop an accountable process to ensure ``meaningful and timely input 
by State and local officials in the development of regulatory policies 
that have federalism implications.'' ``Policies that have federalism 
implications'' is defined in the Executive order to include regulations 
that have ``substantial direct effects on the States, on the 
relationship between the national government and the States, or on the 
distribution of power and responsibilities among the various levels of 
government.'' This final rule directly regulates growers, food 
processors, food handlers and food retailers, not States. This action 
does not alter the relationships or distribution of power and 
responsibilities established by Congress in the preemption provisions 
of section 408(n)(4) of the FFDCA. For these same reasons, the Agency 
has determined that this rule does not have any ``tribal implications'' 
as described in Executive Order 13175, entitled Consultation and 
Coordination with Indian Tribal Governments (65 FR 67249, November 6, 
2000). Executive Order 13175, requires EPA to develop an accountable 
process to ensure ``meaningful and timely input by tribal officials in 
the development of regulatory policies that have tribal implications.'' 
``Policies that have tribal implications'' is defined in the Executive 
order to include regulations that have ``substantial direct effects on 
one or more Indian tribes, on the relationship between the Federal 
Government and the Indian tribes, or on the distribution of power and 
responsibilities between the Federal Government and Indian tribes.'' 
This rule will not have substantial direct effects on tribal 
governments, on the relationship between the Federal Government and 
Indian tribes, or on the distribution of power and responsibilities 
between the Federal Government and Indian tribes, as specified in 
Executive Order 13175. Thus, Executive Order 13175 does not apply to 
this rule.

XII. Congressional Review Act

    The Congressional Review Act, 5 U.S.C. 801 et seq., as added by the 
Small Business Regulatory Enforcement Fairness Act of 1996, generally 
provides that before a rule may take effect, the agency promulgating 
the rule must submit a rule report, which includes a copy of the rule, 
to each House of the Congress and to the Comptroller General of the 
United States. EPA will submit a report containing this rule and other 
required information to the U.S. Senate, the U.S. House of 
Representatives, and the Comptroller General of the United States prior 
to publication of this rule in the Federal Register. This rule is not a 
``major rule'' as defined by 5 U.S.C. 804(2).

List of Subjects in 40 CFR Part 180

    Environmental protection, Administrative practice and procedure, 
Agricultural commodities, Pesticides and pests, Reporting and 
recordkeeping requirements.


    Dated: July 10, 2006.
Lois Rossi,
Director, Registration Division, Office of Pesticide Programs.

0
Therefore, 40 CFR chapter I is amended as follows:

PART 180--[AMENDED]

0
1. The authority citation for part 180 continues to read as follows:

    Authority: 21 U.S.C. 321(q), 346a and 371.

0
2. In Sec.  180.960 the table is amended by revising the entry for 
``Butene, homopolymer minimum number average molecular weight (in amu), 
1,330'' to read as follows:


Sec.  180.960  Polymers; exemptions from the requirement of a 
tolerance.

* * * * *

------------------------------------------------------------------------
                    Polymer                              CAS No.
------------------------------------------------------------------------
                                * * * * *
Butene, homopolymer                                            9003-29-6

[[Page 42278]]

 
                                * * * * *
------------------------------------------------------------------------

[FR Doc. E6-11720 Filed 7-25-06; 8:45 am]
 BILLING CODE 6560-50-S