[Federal Register Volume 71, Number 77 (Friday, April 21, 2006)]
[Rules and Regulations]
[Pages 20530-20531]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 06-3797]


-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2006-24364; Directorate Identifier 2004-NM-272-AD; 
Amendment 39-14534; AD 2006-07-07]
RIN 2120-AA64


Airworthiness Directives; Airbus Model A300 B4-600, B4-600R, and 
F4-600R Series Airplanes, and Model C4-605R Variant F Airplanes 
(Collectively Called A300-600 Series Airplanes)

AGENCY: Federal Aviation Administration (FAA), Department of 
Transportation (DOT).

ACTION: Final rule; correction.

-----------------------------------------------------------------------

SUMMARY: The FAA is correcting a typographical error in an existing 
airworthiness directive (AD) that was published in the Federal Register 
on March 31, 2006 (71 FR 16206). The error resulted in an incorrect 
Docket No. This AD applies to certain Airbus Model A300-600 series 
airplanes. This AD requires modifying nine bolt holes in the vertical 
flange to prevent cracking before the inspection threshold of AD 98-18-
02.

DATES: Effective April 17, 2006.

ADDRESSES: The AD docket contains the proposed AD, comments, and any 
final disposition. You may examine the AD docket on the Internet at 
http://dms.dot.gov, or in person at the Docket Management Facility 
office between 9 a.m. and 5 p.m., Monday through Friday, except Federal 
holidays. The Docket Management Facility office

[[Page 20531]]

(telephone (800) 647-5227) is located on the plaza level of the Nassif 
Building at the U.S. Department of Transportation, 400 Seventh Street, 
SW., room PL-401, Washington, DC. This docket number is FAA-2006-24364; 
the directorate identifier for this docket is 2004-NM-272-AD.

FOR FURTHER INFORMATION CONTACT: Tim Backman, Aerospace Engineer, ANM-
116, International Branch, Transport Airplane Directorate, FAA, 1601 
Lind Avenue, SW., Renton, Washington 98055-4056; telephone (425) 227-
2797; fax (425) 227-1149.

SUPPLEMENTARY INFORMATION: On March 15, 2006, the FAA issued AD 2006-
07-07, amendment 39-14534 (71 FR 16206, March 31, 2006), for certain 
Airbus Model A300-600 series airplanes. The AD requires modifying nine 
bolt holes in the vertical flange to prevent cracking before the 
inspection threshold of AD 98-18-02.
    As published, the AD lists the Docket No. as FAA-2006-24124. The 
correct Docket No. is FAA-2006-24364.
    No other part of the regulatory information has been changed; 
therefore, the final rule is not republished in the Federal Register.
    The effective date of this AD remains April 17, 2006.
    In the Federal Register of March 31, 2006, on page 16206, in the 
first column; on page 16207, in the third column; and on page 16208 in 
the second column; the Docket No. of AD 2006-07-07 is corrected to read 
as follows: FAA-2006-24364.

    Issued in Renton, Washington, on April 13, 2006.
Ali Bahrami,
Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 06-3797 Filed 4-20-06; 8:45 am]
BILLING CODE 4910-13-P